Swift bindings BEGONE
Release Notes:
- Switched from using the Swift LiveKit bindings, to the Rust bindings,
fixing https://github.com/zed-industries/zed/issues/9396, a crash when
leaving a collaboration session, and making Zed easier to build.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Michael Sloan <michael@zed.dev>
This caused undesirable and unnecessary scrolling, in that if you scroll
up, then as new messages stream into the panel, they jump the scroll bar
back down.
@agu-z and I paired on this and we think this is unnecessary now that we
don't see the Edit button in the UI, but @bennetbo we still see code for
the button in there, so...maybe we do still want this? (If so, we can
revert the second commit and go back to a more conditional way of
scrolling. 😄)
Release Notes:
- N/A
---------
Co-authored-by: Agus <agus@zed.dev>
This is a fix for this error when trying to run `auto_height_editor`
story:
```sh
thread 'main' panicked at C:\Users\x\dev\zed\crates\settings\src\settings_store.rs:363:32:
unregistered setting type workspace::workspace_settings::WorkspaceSettings
```
Release Notes:
- N/A
This PR adds two more cases to existing LSP completion cases.
- When text_edit exists: (New test)
1. we use text_edit, over insert_text and label
- When edit range exists (and text_edit is None): (New test)
1. insert_text is used over label if exists
2. label is used otherwise
- When not edit range exists (and text_edit is None): (Existing test)
1. insert_text is used over label if exists
2. label is used otherwise
Release Notes:
- N/A
Closes#18153
When calling `uninstall_extension`, the `work_dir` associated with this
`extension` doesn't have its corresponding `FileHandle` properly closed,
preventing the deletion of the `work_dir`. As seen in the image below,
after installing the `toml` extension, `zed.exe` holds two `Handle`s for
the folder `C:\Users\36477\AppData\Local\Zed\extensions\work\toml`.
Therefore, after deleting `extension_dir` and then calling
`this.update(...)`, `zed.exe` releases these two `Handles`, and only
then can the folder
`C:\Users\36477\AppData\Local\Zed\extensions\work\toml` be deleted. See
the corresponding file handles are closed after calling
`this.update(...)`:
However, if there is a running server of the extension, the error will
persist. At this point, I haven’t found a direct way to terminate all
running servers of the extension. Since this feature might affect the
`LspStore` structure, I paused my work here.
See when `toml` extension is running, we can not delete
`C:\Users\36477\AppData\Local\Zed\extensions\work\toml` since
`C:\Users\36477\AppData\Local\Zed\extensions\work\toml\taplo.exe` is
still running:
cc @ConradIrwin You're the expert in this area—what are your thoughts?
Release Notes:
- N/A
This PR removes the `ZedAssistant2` icon.
I went to use it as a placeholder icon, but noticed that the icon wasn't
loaded properly due to a name mismatch.
However, since we aren't using it anywhere I'm opting to remove it.
Release Notes:
- N/A
This PR fixes an issue where we were looking for context server project
settings in _all_ worktrees, not just visible ones.
This meant that if you had a single file worktree open (e.g.,
`settings.json`) this could impact whether context servers defined in
project settings would load.
Release Notes:
- Fixed an issue where context servers defined in project settings would
not be respected in some scenarios.
Co-authored-by: Wilhelm Klopp <wil.klopp@gmail.com>
This is a clean-up PR in anticipation of introduction of Debugger
Registry. I wanna get rid of DebugAdapterKind (or rather, it being an
enum).
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
<img width="620" alt="Screenshot 2025-03-27 at 2 29 13 PM"
src="https://github.com/user-attachments/assets/dd023507-61bc-4722-a095-f65f4b6c746a"
/>
We'll iterate on the UI, but first the goal is to just get it to work at
all so we can see if it's useful in terms of getting correct output
faster.
Release Notes:
- N/A
---------
Co-authored-by: Agus Zubiaga <hi@aguz.me>
Now if you refocus Zed manually (e.g. cmd-tab), we hide the "View Panel"
notification automatically.
This also fixes a related subscription leak.
Release Notes:
- N/A
Longer write-up, sorry if this got a bit too long.
This PR removes a small gap between the editor gutter and the horizontal
scrollbar, if present, by stretching the scrollbar track the entire
witdth of the editor.
https://github.com/user-attachments/assets/d5c18b03-d1ff-4d48-a3da-5d0fb80ee967
This gap which can be seen in the bottom left of the video can cause
bugs when interacting with it using the cursor, as accidentally clicking
on it would trigger a vertical scroll instead of dragging the horizontal
scroll. Also for cases where themes provide a non-transparent scrollbar
track background, which can be seen in the video, the small gap is
visible whilst scrolling horizontally.
This gap is present because the horizontal editor scrollbar is layouted
based upon the `content_origin`, which offsets the whole layout by the
horizontal gutter margin to the right. However, the scrollbar should be
layouted based upon the editor text bounds to be properly painted over
the entire editor text hitbox.
Here are some comparison images with `scrollbar.track.background` and
`gutter.background` set to red for visibility.
| | Current `main` | With this change |
| - | - | - |
| Default position / Fully scrolled to the left | <img width="842"
alt="left_main"
src="https://github.com/user-attachments/assets/8b053fc8-5271-4b58-8404-dcabf49bf702"
/> | <img width="842" alt="left_fix"
src="https://github.com/user-attachments/assets/459df723-05d5-4813-a6a4-038f7d662495"
/> |
| Scrolled to the right | <img width="216" alt="scroll_main"
src="https://github.com/user-attachments/assets/9c1fcc0d-fbb4-49af-9645-f258f5a7217b"
/> | <img width="216" alt="scroll_fix"
src="https://github.com/user-attachments/assets/8dd2e585-7802-415b-a05a-fb40a882323e"
/> |
---
#### Small downsight of this approach
Currently, the scrollbar thumb aligns with the indent guides if the
editor is fully scrolled to the left and the track background is
transparent. This is because the indent guides are layouted according to
the content margin.
With this change, however, the scrollbar thumb will shift a few pixels
to the left and will overlap the indent guides if present.
| Current `main` | With this change |
| - | - |
| <img width="295" alt="cur_indent"
src="https://github.com/user-attachments/assets/92753951-6f35-4c39-94eb-21c445f8d2f5"
/> | <img width="381" alt="fix_indent"
src="https://github.com/user-attachments/assets/899d945c-49f8-4117-bc48-52501d55cc33"
/> |
To circumvent this, the scrollbar thumb could be layouted with a small
offset so that the thumb aligns properly with the indent guides whilst
the scrollbar track spans the whole editor width. This would lead to
some questions on how to account for the gap during layouting and
dragging of the thumb though, but might work for a gap that small. Happy
to implement this fix, should that be preferred 😄
(VSCode does not have the indent guide issue, as they do not layout the
text in the editor with any offset unlike Zed does)
Release Notes:
- Removed a small gap between the editor gutter and horizontal
scrollbar.
Closes#25761#21603
When `text_edit` is not available we directly fallback to to `label`.
That means, when we have range to replace, we never use `insertText` and
only use it when we haven't found any range.
This PR fixes, this and uses `insertText` as fallback first, and then
`label`.
Release Notes:
- Fixed an issue where accepting LSP snippet completion would insert the
label instead of expanding the snippet.
Part of #27171
Follows-up the change in
https://github.com/zed-industries/zed/pull/22346 to consider the case
where the assistant-panel is disabled via settings (as also noted in
[this
comment](https://github.com/zed-industries/zed/pull/22346#issuecomment-2558372412),
Notably, only the explicit case is considered here. Can extend this
change to also cover the implicit case where the button is disabled if
requested.).
Currently, if the user toggles the right dock, the assistant panel will
be shown even if it is disabled via settings, because it has the highest
priority (see
https://github.com/zed-industries/zed/pull/22346#issuecomment-2564890493).
With this change, the assistant panel is no longer activated when
disabled and the dock with the next highest activation order is
activated instead.
I did not opt in to make the priority configurabe, as I agree with
https://github.com/zed-industries/zed/pull/22346#issuecomment-2564890493
that this will most likely rarely be used (the active panel is only none
on the first toggle of the dock, afterwards it remains set for the
remainder of the session).
Release Notes:
- `workspace::ToggleRightDock` will no longer open the assistant panel
when it is disabled via settings.
This PR hardcodes the font size for the OS notification and adjusts the
copywriting on the `DoneStreaming` scenario.
1. Reason for the former change is because notifications always have a
fixed width and height, so any responsive design strategy here wouldn't
fully work.
2. Reason for the latter is because when the assistant response is done
streaming, that _can_ mean "changes have been applied" (previous label)
but it can also not mean that. So, I'm making it more generic now.
Release Notes:
- N/A
This PR removes the `predict-edits-non-eager-mode` feature flag.
The feature is shipped, and we aren't referencing the flag anywhere
anymore.
Release Notes:
- N/A
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [log](https://redirect.github.com/rust-lang/log) |
workspace.dependencies | patch | `0.4.26` -> `0.4.27` |
---
### Release Notes
<details>
<summary>rust-lang/log (log)</summary>
###
[`v0.4.27`](https://redirect.github.com/rust-lang/log/blob/HEAD/CHANGELOG.md#0427---2025-03-24)
[Compare
Source](https://redirect.github.com/rust-lang/log/compare/0.4.26...0.4.27)
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
---------
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [oo7](https://redirect.github.com/bilelmoussaoui/oo7) | dependencies |
patch | `0.4.1` -> `0.4.3` |
---
### Release Notes
<details>
<summary>bilelmoussaoui/oo7 (oo7)</summary>
###
[`v0.4.3`](https://redirect.github.com/bilelmoussaoui/oo7/releases/tag/0.4.3)
[Compare
Source](https://redirect.github.com/bilelmoussaoui/oo7/compare/0.4.2...0.4.3)
- [cli: Add custom keyring file
support](248d96f225)
- [dbus/secret: Workaround gnome-keyring being non-spec
compliant](cac94b502f)
- [client: Deprecate
Keyring::with_broken_item_cleanup](cce024ba64)
- [cli: Add a new argument for listing all
items](88f5604147)
###
[`v0.4.2`](https://redirect.github.com/bilelmoussaoui/oo7/releases/tag/0.4.2)
#### What's Changed
Relax the condition when validating the file backend keyring secret and
provide various APIs to allow the developer to recover the non-broken
items in a keyring or delete the broken ones.
The root cause of the issue has not been identified but at least apps
will continue to work as normal if the developer uses
`Keyring::with_broken_item_cleanup` instead of `Keyring::new`.
More details can be found in
[#​207](https://redirect.github.com/bilelmoussaoui/oo7/issues/207)
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
|
[async-compression](https://redirect.github.com/Nullus157/async-compression)
| workspace.dependencies | patch | `0.4.21` -> `0.4.22` |
---
### Release Notes
<details>
<summary>Nullus157/async-compression (async-compression)</summary>
###
[`v0.4.22`](https://redirect.github.com/Nullus157/async-compression/blob/HEAD/CHANGELOG.md#0422---2025-03-25)
[Compare
Source](https://redirect.github.com/Nullus157/async-compression/compare/v0.4.21...v0.4.22)
##### Other
- Add lz4 encoder/decoder
- Expose total_in/total_out in DeflateEncoder
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [time](https://time-rs.github.io)
([source](https://redirect.github.com/time-rs/time)) |
workspace.dependencies | patch | `0.3.40` -> `0.3.41` |
---
### Release Notes
<details>
<summary>time-rs/time (time)</summary>
###
[`v0.3.41`](https://redirect.github.com/time-rs/time/blob/HEAD/CHANGELOG.md#0341-2025-03-23)
[Compare
Source](https://redirect.github.com/time-rs/time/compare/v0.3.40...v0.3.41)
##### Fixed
- Compatibility with the latest release of `deranged`. This fix is
permanent and covers future
similar changes upstream.
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [clap](https://redirect.github.com/clap-rs/clap) |
workspace.dependencies | patch | `4.5.32` -> `4.5.34` |
---
### Release Notes
<details>
<summary>clap-rs/clap (clap)</summary>
###
[`v4.5.34`](https://redirect.github.com/clap-rs/clap/blob/HEAD/CHANGELOG.md#4534---2025-03-27)
[Compare
Source](https://redirect.github.com/clap-rs/clap/compare/v4.5.33...v4.5.34)
##### Fixes
- *(help)* Don't add extra blank lines with `flatten_help(true)` and
subcommands without arguments
###
[`v4.5.33`](https://redirect.github.com/clap-rs/clap/blob/HEAD/CHANGELOG.md#4533---2025-03-26)
[Compare
Source](https://redirect.github.com/clap-rs/clap/compare/v4.5.32...v4.5.33)
##### Fixes
- *(error)* When showing the usage of a suggestion for an unknown
argument, don't show the group
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [plist](https://redirect.github.com/ebarnard/rust-plist) |
dependencies | patch | `1.7.0` -> `1.7.1` |
---
### Release Notes
<details>
<summary>ebarnard/rust-plist (plist)</summary>
###
[`v1.7.1`](https://redirect.github.com/ebarnard/rust-plist/compare/v1.7.0...v1.7.1)
[Compare
Source](https://redirect.github.com/ebarnard/rust-plist/compare/v1.7.0...v1.7.1)
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Release Notes:
- Git: Fix crash when staging a hunk that overlaps multiple unstaged
hunks.
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This is another in the series of PRs to make the GitStore own all
repository state and enable better concurrency control for git
repository scans.
After this PR, the `RepositoryEntry`s stored in worktree snapshots are
used only as a staging ground for local GitStores to pull from after
git-related events; non-local worktrees don't store them at all,
although this is not reflected in the types. GitTraversal and other
places that need information about repositories get it from the
GitStore. The GitStore also takes over handling of the new
UpdateRepository and RemoveRepository messages. However, repositories
are still discovered and scanned on a per-worktree basis, and we're
still identifying them by the (worktree-specific) project entry ID of
their working directory.
- [x] Remove WorkDirectory from RepositoryEntry
- [x] Remove worktree IDs from repository-related RPC messages
- [x] Handle UpdateRepository and RemoveRepository RPCs from the
GitStore
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This PR fixes a bug where breakpoints would be rendered on incorrect
lines when openings a git hunk that contained breakpoints. This also
disables breakpoints from being shown in deleted git hunks as well.
Note: There's some unexpected behavior when using an anchor to get a
display point that is in an open git hunk, where the
`anchor.to_point().col == 0`.
```rust
let position = multi_buffer_anchor
.to_point(&multi_buffer_snapshot)
.to_display_point(&snapshot);
```
The above code will return a display point that is one line below where
the anchor actually represents when it's in an opened hunk diff. Which
causes the bug shown below
https://github.com/user-attachments/assets/bd15d02a-3cdc-4c8e-841f-bef238583351
@ConradIrwin Is this expected behavior when calling
`.to_display_point(&snapshot)`?
Release Notes:
- N/A
This change makes the git panel and project panel behave the same, on
Linux and macOS, and adds prompts.
Release Notes:
- Changed the git panel to prompt before restoring a file.
This required adding scrollbar support to `list`. Since `list` is
virtualized, the scrollbar height will change as more items are
measured. When the user manually drags the scrollbar, we'll persist the
initial height and offset calculations accordingly to prevent the
scrollbar from moving away from the cursor as new items are measured.
We're not doing this yet, but in the future, it'd be nice to budget some
time each frame to layout unmeasured items so that the scrollbar height
is as accurate as possible.
Release Notes:
- N/A
A readonly buffer built from a static `&str` output does not need rich
project-based capabilities, and leaking projects in global git panel
might be dangerous.
Also adds readonly capability to the buffer, as
`editor.set_read_only(true);` API is a separate thing.
Release Notes:
- N/A
Workaround for users affected by #25899
Thanks to the work done by @kvark in
https://github.com/kvark/blade/pull/210, we have the ability to tell
Vulkan (through blade) a specific GPU to use.
This will hopefully allow some of the users affected by #25899 to use
Zed by allowing them to use a specific GPU, if the primary/default GPU
will not work
Release Notes:
- Added the ability to specify which GPU Zed uses on Linux by setting
the `ZED_DEVICE_ID` environment variable. You can obtain the device ID
of your GPU by running `lspci -nn | grep VGA` which will output each GPU
on one line like:
```
08:00.0 VGA compatible controller [0300]: NVIDIA Corporation GA104
[GeForce RTX 3070] [10de:2484] (rev a1)
````
where the device ID here is `2484`. This value is in hexadecimal, so to
force Zed to use this specific GPU you would set the environment
variable like so:
```
ZED_DEVICE_ID=0x2484
```
Make sure to export the variable if you choose to define it globally in
a `.bashrc` or similar
Closes#4461
Take 2 on https://github.com/zed-industries/zed/pull/25040.
Fixes panic caused due to using `setHiddenUntilMouseMoves` return type
to `set` cursor on macOS.
Release Notes:
- Now cursor hides when the user is typing in editor. It will stay
hidden until it is moved again. This behavior is `true` by default, and
can be configured with `hide_mouse_while_typing` in settings.
---------
Co-authored-by: Peter Tripp <peter@zed.dev>
Co-authored-by: Thomas Mickley-Doyle <thomas@zed.dev>
Co-authored-by: Agus <agus@zed.dev>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Co-authored-by: Agus Zubiaga <hi@aguz.me>
Co-authored-by: Angelk90 <angelo.k90@hotmail.it>
This PR reworks how we store enabled tools in the `ToolWorkingSet`.
We now track them based on which tools are explicitly enabled, rather
than by the tools that have been disabled.
Also fixed an issue where switching profiles wouldn't properly set the
right tools.
Release Notes:
- N/A
Added support for using `language_server` as HTML formatter.
Added support for finding `vscode-html-language-server` in user's path.
Release Notes:
- N/A
Right now the toolchain popup is a nondescript list of duplicate entries
like `Python 3.10.15 (VirtualEnvWrapper)` and one has to look at the
interpreter path to distinguish one virtualenv from another.
Fix this by including the env name as reported by pet, so the entries
looks like `Python 3.10.15 (myproject; VirtualEnvWrapper)`.
Release Notes:
- Python: Improved display of environments in toolchain selector
This PR renames the variants of the `Extension` enum with delimiters
between the version number components so that it's clearer which version
of the extension API they refer to.
Release Notes:
- N/A
Closes: #17543
Release Notes:
- **New Feature:** Introduced the ability to automatically remove files
and directories from the Zed project panel that are specified in
`.gitignore`.
- **Configuration Option:** This behavior can be controlled via the new
`project_panel.hide_gitignore` setting. By setting it to `true`, files
listed in `.gitignore` will be excluded from the project panel.
- **Toggle:** Ability to toggle this setting using the action
`ProjectPanel::ToggleHideGitIgnore`
```json
"project_panel": {
"hide_gitignore": true
},
```
This results in a cleaner and easier to browse project panel for
projects that generate a lot of object files like `xv6-riscv` or `linux`
without needing to tweak `file_scan_exclusions` on `settings.json`
**Preview:**
- With `"project_panel.hide_gitignore": false` (default, this is how zed
currently looks)
- With `"project_panel.hide_gitignore": true`
- Action `ProjectPanel::ToggleHideGitIgnore`
Closes#25247
Since the upstream `Notify` repo hasn't merged the related PR yet, this
is basically a temporary patch to work around it.
Release Notes:
- N/A
This ensures that we do not get a bunch of error logs when using the
symbol search:
```
[2025-03-26T13:23:32+01:00 ERROR project] Method not found
[2025-03-26T13:23:32+01:00 ERROR project] Method not found
[2025-03-26T13:23:32+01:00 ERROR project] Method not found
[2025-03-26T13:23:32+01:00 ERROR project] Method not found
[2025-03-26T13:23:32+01:00 ERROR project] Method not found
[2025-03-26T13:23:33+01:00 ERROR project] Method not found
...
```
Release Notes:
- N/A
This PR adds the ability to enable/disable breakpoints. It also fixes a
bug where toggling a log breakpoint from the breakpoint context menu
would add a standard breakpoint on top of the log breakpoint instead of
deleting it.
todo:
- [x] Add `BreakpointState` field Breakpoint that manages if a
breakpoint is active or not
- [x] Don't send disabled breakpoints to DAP servers - in progress
- [x] Half the opacity of disabled breakpoints - in progress
- [x] Add `BreakpointState` to database
- [x] Editor test for enabling/disabling breakpoints
- [ ] Integration Test to make sure we don't send disabled breakpoints
to DAP servers
- [x] Database test to make sure we properly serialize/deserialize
BreakpointState
Release Notes:
- N/A
---------
Co-authored-by: Piotr <piotr@zed.dev>
Co-authored-by: Conrad <conrad@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
This PR fixes an issue where a clickable scrollbar track was inserted in
the editor even when scrollbars were explicitly disabled via the user's
settings. If the user has
```json
"scrollbar": {
"show": "never"
}
```
in their settings, invisible and interactable scrollbar tracks will be
inserted in the editor if scrollbars would be required, as seen below:
https://github.com/user-attachments/assets/b0d915a9-7a7e-4518-84d8-96d9b15aab12
The bug occurs because we only set the scrollbar contents to be
invisible, which however does not affect the insertion of hitboxes for
the scrollbars.
This PR fixes this behaviour by preventing any scrollbar layouting from
happening when scrollbars are explicitly disabled via the settings:
https://github.com/user-attachments/assets/a3f5725b-aead-4fec-9fd8-e574cf269d45
All existing panels which have configurable scrollbars behave the same
way, see
fb2586a553/crates/outline_panel/src/outline_panel.rs (L4362-L4373)
for example. Following this check, neither a thumb nor a track is
inserted in any case when scrollbars are never to be shown.
Release Notes:
- Fixed invisible scrollbar tracks being inserted into the editor when
scrollbars are explicitly disabled via settings.
This seems more correct as corners are not necessarily only for rounding
radii.
Also applies clamping after scaling in `paint_quad`, deduplicating that
logic. This also provides a more precise result by doing the clamping
after scaling, avoiding floating point rounding issues (probably a
non-issue).
Release Notes:
- N/A
Temporary Workaround For: #27283
This PR can (and should!) be reverted once the underlying inefficiencies
are resolved
Release Notes:
- Files that are 6GB or larger will now not open. This is a temporary
workaround for inefficient handling of large files resulting in
extremely high memory usage, often resulting in system freezing,
requiring a restart of Zed or the entire system.
This PR is primarily an implementation of @osiewicz
[comment](https://github.com/zed-industries/zed/pull/19495#pullrequestreview-2488877957)
in an effort to increase maintainability after the horizontal editor
scrollbar was added in #19495 . I also want to build on these changes in
future PRs to adress some other small bugs.
This primarily does the following:
1. Uses `along` wherever possible
2. Fixes the amount of mouse event listeners attached to the editor when
scrollbars are displayed to 2 instead of 2-4 in case both scrollbars are
displayed.
This can be done since only one scrollbar can be dragged by the cursor
at any given time, so the event listeners now account for that. The
state reflecting the scrollbar dragging state was also updated
accordingly.
It does not change any functionality besides the aforementioned event
listener code as well as some minor bugs which where present after
#19495 , namely:
- One missing `cx.stop_propagation()` (see
[here](a8741dc310/crates/editor/src/element.rs (L4684))
and
[here](a8741dc310/crates/editor/src/element.rs (L4838))
respectively).
- The horizontal scrollbar thumb having a small border on the left side,
which seems to be unintended for the horizontal scrollbar whilst
intended for the vertical one. Since this is a minimal change, I figured
it could be already included in this PR.
This PR admittetly grew quite large over time, however, much of the diff
is just renames to account for the code now working for both axes as
well as moved code. The logic remains (or should at least be)
unaffected. If I should split this into two PRs or remove some of the
changes, please let me know.
Release Notes:
- N/A
Closes#26460
I am new to contributing to Zed (and pretty new to Rust in general). I'm
not too familiar with code style, guidelines etc. so please feel free to
suggest changes/improvements.
This PR adds a run icon to Python files that have a "main" function:
```python
if __name__ == "__main__":
...
```
In addition to the gutter icon, there is now also an extra task in the
command palette "run module".
Release Notes:
- Added detection for runnable Python modules
- Added Python-specific task to run a Python file as a module from
inside the project's scope
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
This PR encapsulates the layout building of the Onboarding Banner
component inside of it, allowing to, at the call site, just pass an
icon, title, and subtitle. The `subtitle` parameter, by default, uses
the `Introducing:` label, which I think will be the one we'll use most
of the time for this specific component.
Release Notes:
- N/A
It doesn't make sense to have `Pixels: Mul<Pixels, Output = Pixels>` as
the output should be `Pixels^2` (area), so these impls are removed. All
code where these impls were used are improved by instead multiplying by
`f32` or `usize`.
Also adds math op impls that are present for `Pixels` but absent for
`ScaledPixels`. Adds missing `Mul<Pixels> for usize` to both.
Release Notes:
- N/A
This PR removes the dependency on the `ui` crate from the
`assistant_tool` and `context_server` crates.
These crates were only depending on it for `IconName`, which can now be
depended on from `icons` directly.
Release Notes:
- N/A
This PR removes the dependency on the `ui` crate from the
`language_model` crate.
We were only depending on it to import `IconName`—which now lives in
`icons`—and some re-exported GPUI items.
Release Notes:
- N/A
This PR adds a new `icons` crate and moves the `IconName` into it.
We have a number of crates that are taking a dependency on `ui` just so
they can talk about icons, which is not ideal.
Release Notes:
- N/A
This PR makes the "Inline Assist" quick action in the quick action bar
work by dispatching the `InlineAssist` action.
This fixes an issue where the button was not working with Assistant 2.
Release Notes:
- N/A
@agu-z and paired on trying out a "one tool call per edit" approach for
editing files. (The previous approach is still available, it's just
unchecked by default for now.)
Release Notes:
- N/A
---------
Co-authored-by: Agus <agus@zed.dev>
Sometimes we've seen models provide an empty string for the path search
glob. This assumes they meant "*" when that happens.
Separately, this also removes an unnecessary `clone` of a `String`.
Release Notes:
- N/A
Closes https://github.com/rzukic/zed-latex/issues/70 where the language
server `texlab` is not used for code formatting when the "cspell"
extension is also installed, because it also provides a language server
for the LaTeX filetype but only for spell checking.
Release Notes:
- Fix conflict between LaTeX and cspell extensions affecting code formatting on save.
- Add instructions in description to read before editing
- Add instructions in edit prefix to explicitly ask for reads
- Fix `connection error: delay between messages too long` by processing
chunks off a channel
Release Notes:
- N/A
Closes#10832
Note: This PR only fixes the issue where when entering one of `except`,
`finally`, `else`, and `elif` after another block like so:
```python
try:
for i in range(n):
pass
except:|
```
The `except` would be indented resulting in the following:
```python
try:
for i in range(n):
pass
except:|
```
This PR does not fix a separate issue in which the indentation is not
corrected from the second example to the first, i.e. if example 2 is
typed verbatim in Zed it will not auto-indent to look like example 1.
Handling of this case would likely require specific logic to handle, or
changes to the tree-sitter grammar for Python, as the current grammar
results in ERROR nodes that obscure the natural structure (cannot tie
the `except` to the `try`)
Release Notes:
- Fixed an issue where `except`, `finally`, `else`, and `elif` control
flow keywords in Python would be incorrectly indented when entered at
the correct level of indentation.
It turns out that on linux crane's `buildDepsOnly` was working fine, so
I'm re-enabling it and will worry about why it's failing on darwin
later.
This should significantly improve the amount of artifact-reuse for the
linux nix builds, which will hopefully bring build times low enough that
we're ok putting it in CI.
Release Notes:
- N/A
Another step towards having `zlog` as the default logging solution in
Zed.
The new ScopeMap replaces the previous HashMap based implementation used
for scope lookups to:
A. Reduce complexity
B. Increase speed at which non-enabled logs can be filtered out
C. Provide more granular control over how scopes are determined to be
enabled/disabled,
and what caching/other speed increase opportunities are available
Release Notes:
- N/A
Also took the opportunity to rename the action to something that would
be clearer in the command palette, from `DeployPromptLibrary` to
`OpenPromptLibrary`.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
This PR improves the keyboard navigation for the variable list.
Before this PR, if you want to open/close nested variables, you had to
use the right/left & up/down arrow keys.
Now you can step through with just only using your left/right arrow
keys, this feels a bit more natural and more similar to how other
editors allow you to navigate through variables.
This PR also fixes the following issues:
- Allow selecting a scope to be the start of your selection
- Allow selecting previous item if the first item is selected
-----
https://github.com/user-attachments/assets/aff0b133-97be-4c09-8ee6-b11495ad5568
Release Notes:
- N/A
This PR updates two existing settings to use the settings migrator
instead of a manually implemented visitor. Both of these settings were
changed prior to the introduction of automatic migrations and the
visitor ensured that the settings were kept backwards compatible. See
https://github.com/zed-industries/zed/pull/22200 and
https://github.com/zed-industries/zed/pull/22364 respectively.
WIth this change, existing user configurations are updated accordingly
and the corresponding settings can derive `Deserialize` again.
I also added tests for the replacement of settings values, as there was
no test for this behaviour. Additionally, I added a seperate test for
the existing migration of `always_show_close_button`, since that
migration updated both the key and value.
Release Notes:
- N/A
We decided to take this out for now. It doesn't seem necessary, and it
complicates the code a lot. We can always put it back later if desired.
Release Notes:
- N/A
This is one of the causes for race conditions, but isn't a specific bug fix by itself.
Release Notes:
- N/A
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This fixes a rare bug where a breakpoint isn't saved in the database
when a user toggles a breakpoint and immediately exits out of zed.
Release Notes:
- N/A
Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>
- **support alternate tag name node names to fix autoclosing of
`<Foo.Bar>` style tags in TSX**
- **remove checks against close tag name while checking if tag is
closed**
- **move jsx tag auto close tests into jsx_tag_auto_close.rs**
Closes#27335
Release Notes:
- Fixed an issue with JSX tag auto-close where components containing a
`.` access like `<Foo.Bar>` would be auto-closed as `</>` instead of
`</Foo.Bar>`
Closes#27355
This PR treat `bun.lock` file as `.jsonc`
note:
[bun.lock](https://bun.sh/blog/bun-lock-text-lockfile) is a lockfile of
bun.js
Release Notes:
- Updated `bun.lock` files to be recognized as JSONC.
Related #14222
Release Notes:
- This PR updates `cosmic-text` dependency on `gpui` crate from `0.11.2`
to 0.13.2`. This decreases RAM usage zed depending on the amount of
monospace fonts installed on the system. On Arch Linux with `nerd-fonts`
package installed (which provides around 2000 monospaced fonts), it
decreases ram usage from ~800mb to around ~300mb.
- Updated `cosmic-text` to `0.13.2` on `gpui` crate
This PR updates the Erlang docs to list the two language servers the
extension offers support for, as well as how to switch from `erlang_ls`
to `erlang-language-platform`.
Release Notes:
- N/A
I think it's helpful to illustrate how some settings can be added to the
project settings file rather than being global.
Release Notes:
- N/A
---------
Co-authored-by: Peter Tripp <peter@zed.dev>
Ruby LSP displays important information in its logs upon startup, such
as which formatter is detected. Being able to see this helps a lot when
configuring or troubleshooting.
cc @vitallium
Release Notes:
- N/A
The example in the docs works with Rails but not plain minitest.
There are workarounds such as the [`m`](https://github.com/qrush/m) gem,
or adding ActiveSupport to a non-Rails project, but I feel they are
beyond the scope of the docs here.
Release Notes:
- N/A
Most terminal emulators, like macOS Terminal, Alacritty, and Ghostty,
have alternate scroll turned on by default. I think it makes sense for
the Zed terminal to do the same and make it more of an opt-out feature.
Release Notes:
- N/A
When the selection grows both ways, the new code prioritizes the top
part instead of bottom one, this is usually more helpful considering
that most programming language grammars tend to define tokens right
before large delimited blocks, and rarely after (because humans and
parsers read from top to bottom).
Also, revert selection when convenient, so you have more control over
what you're selecting, looking at the selection `head` is commonly more
convenient than at the `tail`.
Release Notes:
- Improve scrolling of `editor::SelectLargerSyntaxNode` for better
visibility.
Closes#22398
Release Notes:
- vim: Adds `'` and `"` marks (last location jumped from in the current
buffer, and location when last exiting a buffer)
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes#26884
Release Notes:
- vim: Added `:marks` which brings up list of current marks
- confirming on selected mark in the view jumps to that mark
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Adds the `--system-specs` flag to the Zed binary, so that users who wish
to report issues can retrieve their system specs, even if Zed is failing
to launch
Still TODO:
- [x] Test and do best effort GPU info detection on Linux
- [ ] Modify GitHub issue templates to tell users that the flag is
available if they are unable to launch Zed
Release Notes:
- Added the `--system-specs` flag to the Zed binary (not the cli!), to
retrieve the system specs we ask for in GitHub issues without needing to
open Zed
Before MarkdownParagraphChunk::Image was pushed for every Text event if
we're currently inside an image. This was wrong since pulldown-cmark
parses `` as:
Start(Image { link_type: Inline, dest_url: "foo", title: "", id: "" })
End(Image)
If there is no alt text, no Text event is emitted. Which caused images
without any alt text not to be rendered at all.
For alt texts containing inline formatting this was even more obviously
broken since e.g. `` gets parsed as:
Start(Image { link_type: Inline, dest_url: "foo", title: "", id: "" })
Text(Borrowed("foo "))
Start(Emphasis)
Text(Borrowed("bar"))
End(Emphasis)
Text(Borrowed(" baz"))
End(Image)
which for this example caused the image to appear 3 times in the
preview.
This commit fixes these two bugs which have existed since the
introduction of the image previews in
96854c68ea.
Release Notes:
- Fixed images in the markdown preview appearing not at all or too
often.
This PR adds an action that clears all breakpoints and notifies any
active DAPs.
todo
- [x] Implement clear functionality
- [x] Write an integration test for this
Release Notes:
- N/A *or* Added/Fixed/Improved ...
---------
Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>
Scaffolding for a revised way of logging in Zed. Very WIP, but the idea
is to allow maintainers to tell users to paste
```json
{
"log": {
"project.format": "trace"
}
}
```
into their settings so that even trace logs are emitted for the log
statements emitted from a logger under the `project.format` scope.
The plan is to eventually implement the `Log` trait from the `log` crate
instead of just wrapping the `log` crate, which will simplify the
implementation greatly, and remove our need for both the `env_logger`
and `simplelog` crates.
Additionally, work will be done to transition to using the scoped
logging APIs throughout the app, focusing on bug hotspots to start
(currently, scoped logging is only used in the format codepath).
Release Notes:
- N/A
Since `TextLayout` is not shared by multiple threads, changing it to
`Rc<RefCell<T>>` should improve performance.
I also found several codes with the same problem. If you think this
change is beneficial, I will continue to improve it in the subsequent
PR. 🙂
Release Notes:
- N/A
This PR fixes the new awkward-looking git status labels due to the
change in version control colors. We want to enable styling version
control colors distinctly from other statuses, but these colors aren't
great for labels as they are meant to be quite high contrast.
We may need to split version control colors into a primary color and a
text color if we want to improve theming this overall.
| Before | After |
|--------|-------|
| 
| 
|
Release Notes:
- Fixes a regression in git status colors in the project panel
This PR updates the ordering of the agent profiles in the tool selector
to respect the order they are defined in in the settings instead of
sorting them alphabetically.
This gives the user more control, and allows them to order the profiles
as they desire.
Release Notes:
- N/A
This fixes a bug where breakpoint's were unable to be toggled if the
text::Anchor representing the breakpoint position was not at the
beginning of a line.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
This PR moves the definitions of the built-in agent profiles into the
default `settings.json`.
It also changes the behavior of how this setting is treated when merging
settings such that the set of profiles will be merged. This is so users
don't clobber the built-in profiles when adding profiles of their own.
Release Notes:
- N/A
This pull request paves way for exposing manifest tracking to
extensions.
- Project tree was renamed to manifest tree to better reflect it's
intent (and avoid confusion).
- Language server adapters now provide a name of their *manifest
locator*. If multiple language servers refer to the same locator, the
locating code will run just once for a given path.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
---------
Co-authored-by: Anthony <anthony@zed.dev>
- Follow-up to: https://github.com/zed-industries/zed/pull/26247
Previously with defaults meant that Markdown would softwrap even if you
had available window space (soft_wrap occurred at default
`preferred_line_length` of 80).
Release Notes:
- Changed Markdown default to soft_wrap at window width instead of
preferred_line_length
Closes#25671
Release Notes:
- Added support for `claude-3-7-sonnet-thinking` in the assistant panel
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Agus Zubiaga <hi@aguz.me>
Closes https://github.com/zed-industries/zed/issues/14334, allowing
users to set environment variables for a language server binary like:
```json
"lsp": {
"rust-analyzer": {
"binary": {
"path": "/Users/dbarsky/.cargo/bin/rust-analyzer",
"env": {
"RA_PROFILE": "*>100"
}
},
}
}
```
The newly introduced environment variables are merged with the shell
environment. Perhaps more controversially, I've _also_ removed the
trimming/`stderr:`-prefixing of language server logs. This because
rust-analyzer has some nice, tree-shaped profiling built-in, and it
prevents us from printing profiles like this:
<details>
<img width="1147" alt="Screenshot 2025-03-20 at 12 09 14 PM"
src="https://github.com/user-attachments/assets/b7066651-6394-492b-b745-906c66d3c7b2"
/>
</details>
Release Notes:
- Added the ability to set a language server's environment variables.
- Removed the `stderr`-prefix of a language server's stderr logs.
This is a pure refactoring PR that goes through all the git-related APIs
exposed by the worktree crate and minimizes their use outside that
crate, migrating callers of those APIs to read from the GitStore
instead. This is to prepare for evacuating git repository state from
worktrees and making the GitStore the new source of truth.
Other drive-by changes:
- `project::git` is now `project::git_store`, for consistency with the
other project stores
- the project panel's test module has been split into its own file
Release Notes:
- N/A
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This PR updates our DB schemas and wire protocol to separate the
synchronization of git statuses and other repository state from the
synchronization of worktrees. This paves the way for moving the code
that executes git status updates out of the `worktree` crate and onto
the new `GitStore`. That end goal is motivated by two (related) points:
- Disentangling git status updates from the worktree's
`BackgroundScanner` will allow us to implement a simpler concurrency
story for those updates, hopefully fixing some known but elusive bugs
(upstream state not updating after push; statuses getting out of sync in
remote projects).
- By moving git repository state to the project-scoped `GitStore`, we
can get rid of the duplication that currently happens when two worktrees
are associated with the same git repository.
Co-authored-by: Max <max@zed.dev>
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This PR fixes a few issues around shutting down a debug adapter.
The first issue I discovered was when I shut down all sessions via
`shutdown all adapters` command. We would still fetch the threads
request again, because we receive a thread event that indicated that it
exited. But this will always time out because the debug adapter is
already shutdown at this point, so by updating the check so we don't
allow fetching a request when the session is terminated fixes the issue.
The second issue fixes a bug where we would always shut down the parent
session, when a child session is terminated. This was reintroduced by
the big refactor. This is not something we want, because you could
receive multiple StartDebugging reverse requests, so if one child is
shutting down that does not mean the other ones should have been
shutting down as well.
Issue was original fixed in
https://github.com/RemcoSmitsDev/zed/pull/80#issuecomment-2573943661.
## TODO:
- [x] Add tests
Release Notes:
- N/A
Closes#24794
We now don't filter matches provided by the fuzzy matcher, as it already
performs most of the filtering for us. Instead, the custom logic we
previously used for filtering is now used to partition, where before
discarded matches will be appended at end of list.
Before - Filtering out matches with higher fuzzy score
<img width="400" alt="image"
src="https://github.com/user-attachments/assets/7f9d66a2-0921-499c-af8a-f1e530da50b1"
/>
After - Changing filter to partition instead, and appending remaining
items at the end
<img width="400" alt="image"
src="https://github.com/user-attachments/assets/45848f70-ed51-4935-976c-6c16c5b5777b"
/>
Release Notes:
- Improved LSP auto complete to show more possible matches.
---------
Co-authored-by: Peter Tripp <petertripp@gmail.com>
I think we still want to be able to easily capture system spec info from
users. They can decide if they want to include it or not.
Release Notes:
- N/A
This PR makes `App::get_name` return an `Option` instead of panicking if
the name is not set.
We'll let the caller be responsible for dealing with the absence of a
name.
Release Notes:
- N/A
This PR gives each context server entry in the configuration view a
unique element ID.
This fixes some issues where the disclosures and switches weren't
working properly due to element ID collisions.
Release Notes:
- N/A
Sometimes the editor model returns no search/replace blocks. This
usually happens when the architect model calls the edit tool before
reading any files. When this happens, we'll now return the raw response
from the editor model to the architect model so it can recover
accordingly.
Release Notes:
- N/A
This PR fixes an issues where the commands returned from context server
extensions were being used as-is instead of interpreting them relative
to the extension's work dir.
Release Notes:
- Fixed an issue with context server paths not being interpreted
relative to the extension's work dir.
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Thomas Mickley-Doyle <tmickleydoyle@gmail.com>
After our last community sync, we came to the conclusion that feedback
being sent outside of email is difficult to reply to. Our decision was
to use the old, tried and true email system, so that we can better
respond to people asking questions.
<img width="392" alt="SCR-20250320-igub"
src="https://github.com/user-attachments/assets/f1d01771-30eb-4b6f-b031-c68ddaac5700"
/>
Release Notes:
- N/A
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Instead of just reporting a search match failure, we'll now indicate
whether the file is empty or exists to help the model recover better
from bad edits.
Release Notes:
- N/A
Makes Python plugin to output
for standalone Python files now, instead of nothing as now.
Before the change, no task context was created for the standalone file
due to `VariableName::RelativeFile` lookup considered as an error.
Now, Zed continues and constructs whatever possible context instead.
That `pytest` task seems odd, as the logic fixed here needs a relative
path (hence, a worktree) to consider unit tests.
We do not have variables at the moment the associated tasks are queried
for:
14920ab910/crates/languages/src/python.rs (L359-L363)14920ab910/crates/languages/src/python.rs (L417-L446)
so we cannot filter this the same way the PR does.
Maybe, we can use a `VariableName::RelativeFile` instead of
`VariableName::File` there?
Release Notes:
- Show tasks from Python plugin for standalone files
Closes#18581
Now characters for completing query and word characters, which are
responsible for selecting words by double clicking or navigating, are
different. This fixes a bunch of things:
For settings.json, this improves completions to treat the whole string
as a completion query, instead of just the last word. We now added
"space" as a completion query character without it being a word
character.
For keymap.json, this improves selecting part of an action as the ":"
character is only a completion character and not a word character. So,
completions would still trigger on ":" and query capture will treat ":"
as a word, but for actions like selections and navigation, ":" will be
treated as punctuation.
Before:
Unnecessary related suggestions as query is only the last word which is
"d".
<img width="300" alt="image"
src="https://github.com/user-attachments/assets/8199a715-7521-49dd-948b-e6aaed04c488"
/>
Double clicking `ToggleFold` selects the whole action:
<img width="300" alt="image"
src="https://github.com/user-attachments/assets/c7f91a6b-06d5-45b6-9d59-61a1b2deda71"
/>
After:
Now query is "one d" and it shows only matched ones.
<img width="300" alt="image"
src="https://github.com/user-attachments/assets/1455dfbc-9906-42e8-b8aa-b3f551194ca2"
/>
Double clicking `ToggleFold` only selects part of the action, which is
more refined behavior.
<img width="300" alt="image"
src="https://github.com/user-attachments/assets/34b1c3c2-184f-402f-9dc8-73030a8c370f"
/>
Release Notes:
- Improved autocomplete suggestions in `settings.json`, now whole string
is queried instead of just last word of string, which filters out lot of
false positives.
- Improved selection of action in `keymap.json`, where now you can
double click to only select certain part of action, instead of selecting
whole action.
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Ben Kunkle <ben@zed.dev>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [swatinem/rust-cache](https://redirect.github.com/swatinem/rust-cache)
| action | digest | `f0deed1` -> `9d47c6a` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
|
[rustls-platform-verifier](https://redirect.github.com/rustls/rustls-platform-verifier)
| workspace.dependencies | patch | `0.5.0` -> `0.5.1` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [mimalloc](https://redirect.github.com/purpleprotocol/mimalloc_rust) |
dependencies | patch | `0.1.43` -> `0.1.44` |
---
### Release Notes
<details>
<summary>purpleprotocol/mimalloc_rust (mimalloc)</summary>
###
[`v0.1.44`](https://redirect.github.com/purpleprotocol/mimalloc_rust/releases/tag/v0.1.44):
Version 0.1.44
[Compare
Source](https://redirect.github.com/purpleprotocol/mimalloc_rust/compare/v0.1.43...v0.1.44)
##### Changes
- Mimalloc v2.2.2
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [unindent](https://redirect.github.com/dtolnay/indoc) |
workspace.dependencies | patch | `0.2.3` -> `0.2.4` |
---
### Release Notes
<details>
<summary>dtolnay/indoc (unindent)</summary>
###
[`v0.2.4`](https://redirect.github.com/dtolnay/indoc/releases/tag/0.2.4)
[Compare
Source](https://redirect.github.com/dtolnay/indoc/compare/0.2.3...0.2.4)
- Update to Syn 0.13
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [winresource](https://redirect.github.com/BenjaminRi/winresource) |
build-dependencies | patch | `0.1.19` -> `0.1.20` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [time](https://time-rs.github.io)
([source](https://redirect.github.com/time-rs/time)) |
workspace.dependencies | patch | `0.3.37` -> `0.3.40` |
---
### Release Notes
<details>
<summary>time-rs/time (time)</summary>
###
[`v0.3.40`](https://redirect.github.com/time-rs/time/blob/HEAD/CHANGELOG.md#0340-2025-03-18)
[Compare
Source](https://redirect.github.com/time-rs/time/compare/v0.3.39...v0.3.40)
##### Added
- Visibility modifiers may now be added to the `mod` generated by
`time::sere::format_description!`.
###
[`v0.3.39`](https://redirect.github.com/time-rs/time/blob/HEAD/CHANGELOG.md#0339-2025-03-06)
[Compare
Source](https://redirect.github.com/time-rs/time/compare/v0.3.38...v0.3.39)
##### Fixed
- Doc tests run successfully with the default feature set.
- wasm builds work again.
Both of these were regressions in v0.3.38 and are now checked in CI.
###
[`v0.3.38`](https://redirect.github.com/time-rs/time/blob/HEAD/CHANGELOG.md#0338-2025-03-05)
[Compare
Source](https://redirect.github.com/time-rs/time/compare/v0.3.37...v0.3.38)
##### Added
- The `[year]` component (in format descriptions) now supports a `range`
modifier, which can be
either `standard` or `extended`. The default is `extended` for backwards
compatibility. This is
intended as a manner to opt *out* of the extended range when the
`large-dates` feature is enabled.
When the `large-dates` feature is not enabled, the modifier has no
effect.
- `UtcDateTime`, which is semantically equivalent to an `OffsetDateTime`
with UTC as its offset. The
advantage is that it is the same size as a `PrimitiveDateTime` and has
improved operability with
well-known formats.
As part of this, there were some other additions:
- `utc_datetime!` macro, which is similar to the `datetime!` macro but
constructs a `UtcDateTime`.
- `PrimitiveDateTime::as_utc`
- `OffsetDateTime::to_utc`
- `OffsetDateTime::checked_to_utc`
- `time::serde::timestamp::milliseconds_i64`, which is a module to
serialize/deserialize timestamps
as the Unix timestamp. The pre-existing module does this as an `i128`
where an `i64` would
suffice. This new module should be preferred.
##### Changed
- `error::Format` has had its `source()` implementation changed to no
longer return a boxed value
from the `ComponentRange` variant. If you were explicitly expecting
this, you will need to update
your code. The method API remains unchanged.
- `[year repr:century]` supports single-digit values.
- All `format_into` methods accept `?Sized` references.
##### Miscellaneous
- Some non-exhaustive enum variants that are no longer used have been
modified to be statically
proven as uninhabited. The relevant fields are doc-hidden and not
semver-guaranteed to remain as
such, though it is unlikely to change.
- An unnecessary check when parsing RFC 2822 has been removed.
- Various methods have had their implementations changed, resulting in
significant performance
gains. Among the methods changed are
- `util::is_leap_year`
- `util::weeks_in_year`
- `Month::length`
- `Date::to_calendar_date`
- `Date::month`
- `Date::day`
- `Date::from_julian_day`
- `Date::to_julian_day`
- other methods that call into these methods
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [serde_repr](https://redirect.github.com/dtolnay/serde-repr) |
workspace.dependencies | patch | `0.1.19` -> `0.1.20` |
---
### Release Notes
<details>
<summary>dtolnay/serde-repr (serde_repr)</summary>
###
[`v0.1.20`](https://redirect.github.com/dtolnay/serde-repr/releases/tag/0.1.20)
[Compare
Source](https://redirect.github.com/dtolnay/serde-repr/compare/0.1.19...0.1.20)
- Documentation improvements
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [serde_json](https://redirect.github.com/serde-rs/json) | dependencies
| patch | `1.0.139` -> `1.0.140` |
| [serde_json](https://redirect.github.com/serde-rs/json) |
workspace.dependencies | patch | `1.0.139` -> `1.0.140` |
---
### Release Notes
<details>
<summary>serde-rs/json (serde_json)</summary>
###
[`v1.0.140`](https://redirect.github.com/serde-rs/json/releases/tag/v1.0.140)
[Compare
Source](https://redirect.github.com/serde-rs/json/compare/v1.0.139...v1.0.140)
- Documentation improvements
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about these
updates again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Closes#24588Closes#25419
Restructures `LspStore.format_local` a decent bit in order to make how
the transaction history is preserved more clear, and in doing so fix
various bugs with how the transaction history is handled during a format
request (especially when formatting in remote dev)
Release Notes:
- Fixed an issue that prevented formatting from working when working
with remote dev
- Fixed an issue when using code actions as a format step where the
edits made by the code actions would not be grouped with the other
format edits in the undo history
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [semver](https://redirect.github.com/dtolnay/semver) |
workspace.dependencies | patch | `1.0.25` -> `1.0.26` |
---
### Release Notes
<details>
<summary>dtolnay/semver (semver)</summary>
###
[`v1.0.26`](https://redirect.github.com/dtolnay/semver/releases/tag/1.0.26)
[Compare
Source](https://redirect.github.com/dtolnay/semver/compare/1.0.25...1.0.26)
- Documentation improvements
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
I'll be using this to `nix run github:zed-industries/zed/nightly` and
get an up-to-date and cached nightly build.
It'll also serve as a way to warn me when the nix build is broken,
rather than having to wait for users to report it.
Eventually and depending on the build time of the nix builds, we may
want to consider putting a nix build in CI (#17458) to prevent
breakages, but for now a best-effort nightly build that doesn't block
the job if it fails is a good start.
Resolve#19937
Release Notes:
- N/A
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
|
[async-compression](https://redirect.github.com/Nullus157/async-compression)
| workspace.dependencies | patch | `0.4.20` -> `0.4.21` |
---
### Release Notes
<details>
<summary>Nullus157/async-compression (async-compression)</summary>
###
[`v0.4.21`](https://redirect.github.com/Nullus157/async-compression/blob/HEAD/CHANGELOG.md#0421---2025-03-15)
[Compare
Source](https://redirect.github.com/Nullus157/async-compression/compare/v0.4.20...v0.4.21)
##### Fixed
- When flate encoding, do not mark internal state as flushed if it ran
out of buffer space.
- Add debug assertion in `produce` method to check buffer capacity in
implementations for `BufWriter`.
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [async-std](https://async.rs)
([source](https://redirect.github.com/async-rs/async-std)) |
dependencies | patch | `1.13.0` -> `1.13.1` |
---
### Release Notes
<details>
<summary>async-rs/async-std (async-std)</summary>
###
[`v1.13.1`](https://redirect.github.com/async-rs/async-std/blob/HEAD/CHANGELOG.md#1131---2025-02-21)
[Compare
Source](https://redirect.github.com/async-rs/async-std/compare/v1.13.0...v1.13.1)
`async-std` has officially been discontinued. We recommend that all
users and
libraries migrate to the excellent
[`smol`](https://redirect.github.com/smol-rs/smol/)
project.
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This is surprising, but the Anthropic API returns a 400 if a tool output
is an empty string because it thinks we're attaching a `tool use`
without a corresponding `tool result`, but we are not, it's just empty
(which seems totally reasonable) 🙃
Release Notes:
- N/A
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [async-trait](https://redirect.github.com/dtolnay/async-trait) |
workspace.dependencies | patch | `0.1.87` -> `0.1.88` |
---
### Release Notes
<details>
<summary>dtolnay/async-trait (async-trait)</summary>
###
[`v0.1.88`](https://redirect.github.com/dtolnay/async-trait/releases/tag/0.1.88)
[Compare
Source](https://redirect.github.com/dtolnay/async-trait/compare/0.1.87...0.1.88)
- Fix lifetime bounding on generic parameters that have cfg
([#​289](https://redirect.github.com/dtolnay/async-trait/issues/289))
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
`APKBUILD` files are similar to `PKGBUILD` used by arch linux, but are
used to build alpine linux packages:
https://wiki.alpinelinux.org/wiki/APKBUILD_Reference
Release Notes:
- Added recognition for `APKBUILD` files as "Shell Script".
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
|
[actions/upload-artifact](https://redirect.github.com/actions/upload-artifact)
| action | digest | `4cec3d8` -> `ea165f8` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
|
[cloudflare/wrangler-action](https://redirect.github.com/cloudflare/wrangler-action)
| action | digest | `392082e` -> `da0e0df` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [actions/setup-node](https://redirect.github.com/actions/setup-node) |
action | digest | `1d0ff46` -> `cdca736` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR adds the initial concept of agent profiles to Assistant 2.
Right now these are just collections of tools that can quickly be
enabled together:
https://github.com/user-attachments/assets/7c7f9cc8-a5e5-492f-96f7-79697bbf3d72
There are currently two profiles:
- `Read-only` - Consists only of tools that do not perform writes.
- `Code Writer` - Consists of all tools for writing code, with the
exception of the `lua-interpreter`.
Release Notes:
- N/A
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [actions/checkout](https://redirect.github.com/actions/checkout) |
action | pinDigest | -> `11bd719` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR adds fallback colors for the `version_control.<variant>` theme
properties.
This fixes the colors when themes do not provide the properties.
Related to https://github.com/zed-industries/zed/pull/26951.
Release Notes:
- Added fallback colors for the `version_control.<variant>` theme
properties.
This PR adds the ability to open the extensions view via the `zed:
extensions` action with a pre-selected filter.
The "Install Themes" and "Install Icon Themes" buttons in their
respective selectors take advantage of this to set the filter when
opening the view:
https://github.com/user-attachments/assets/2e345c0f-418a-47b6-811e-cabae6c616d1
Release Notes:
- N/A
This PR reworks the `FakeGitRepository` type that we use for testing git
interactions, to make it more realistic. In particular, the `status`
method now derives the Git status from the differences between HEAD, the
index, and the working copy. This way, if you modify a file in the
`FakeFs`, the Git repository's `status` method will reflect that
modification.
Release Notes:
- N/A
---------
Co-authored-by: Junkui Zhang <364772080@qq.com>
Anthropic API doesn't allow `tool_use` messages without a corresponding
`tool_result`, so we'll skip those when building a request. I'll
separately investigate why we are sending request before the tool result
as that might lead to separate issues, but that might take a while and
this is currently very frustrating.
Release Notes:
- N/A
If the tool asks to read a path, we don't need to verify whether that
path exists on disk; an unsaved buffer with that path is fine.
Release Notes:
- N/A
Closes#26847
Release Notes:
- Updated Git panel background to use panel_background instead of
ElevationIndex::Surface.bg(cx) for consistency with other panels.
- Removed redundant GitStatusColors struct from status.rs and refactored
to use existing theme colors.
- Adjusted Color enum mappings in color.rs to reference
version_control_* colors instead of status() for better alignment with
the theme system.
- Cleaned up unused or redundant code.
Closes#26806
Changes: Clips the new point with `Bias::Right` like in
`saturating_right`
Release Notes:
- vim: Fixed `space` not handling non-ascii characters
Ensuring that text between the "you" messages align with text in the
assistant response. This also creates a nice subtle hierarchy effect
where the "you" message card is wider than the message, making it
slightly easier to tell them apart.
<img
src="https://github.com/user-attachments/assets/616c1776-ca51-454e-9d52-e480bf26c843"
width="600px" />
Release Notes:
- N/A
Sometimes the model produces SEARCH queries that don't match the
indentation of the source file exactly.
When we can't find an exact match, we'll now attempt to match the lines
while being more flexible about the leading whitespace as long as all
lines are consistently offset from the source, and extend the leading
whitespace in the REPLACE string accordingly.
Release Notes:
- N/A
Somebody on Discord ran into issues with running the debugger which goes
down to an unwrap in asset_str. Let's print a path that was accessed.
Release Notes:
- N/A
We weren't incrementing the output token when getting responses from the
debug evaluation request which caused some output to not be displayed.
(Usually the evaluation response, but that could cascade into other
output events not showing)
Release Notes:
- N/A
Co-authored-by: Remco Smits <djsmits12@gmail.com>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Closes #ISSUE
cc @Anthony-Eid. One thing I noticed while doing this is that we do an
invalid cast here from DisplayPoint.row to MultiBufferRow. These are not
the same if you have soft-wrap enabled (or anything else in the display
map that's not in the editor).
Release Notes:
- N/A
This pull request does two things:
1. Adds a setting to force Zed to use the built-in prompts, instead of
the system provided ones. I've personally found the system prompts on
macOS often fail to respond to keyboard input, are slow to render
initially, and don't match Zed's style.
2. Makes the previously Linux-only Zed provided prompts available to
everybody using the above setting.
Release Notes:
- Added support for a built-in prompting system, regardless of platform.
Use the new `use_system_prompts` setting to control whether to use the
system provided prompts or Zed's built-in system. Note that on Linux,
this setting has no effect, as Linux doesn't have a system prompting
mechanism.
This is the core change:
https://github.com/zed-industries/zed/pull/26758/files#diff-044302c0d57147af17e68a0009fee3e8dcdfb4f32c27a915e70cfa80e987f765R1052
TODO:
- [x] Use AsyncFn instead of Fn() -> Future in GPUI spawn methods
- [x] Implement it in the whole app
- [x] Implement it in the debugger
- [x] Glance at the RPC crate, and see if those box future methods can
be switched over. Answer: It can't directly, as you can't make an
AsyncFn* into a trait object. There's ways around that, but they're all
more complex than just keeping the code as is.
- [ ] Fix platform specific code
Release Notes:
- N/A
This PR adds a failing test `test_staging_hunks_with_delayed_fs_event`
and makes it pass
Also skips a queued read for git diff states if another read was
requested (less work)
This still doesn't catch all race conditions, but the PR is getting long
so I'll yield this and start another branch
Release Notes:
- N/A
When we failed to match a search string, we were reporting the replace
string as not found, this confuses the model and can make it go into a
doom loop. This PR fixes that improves the error output in general to
help it recover faster.
Release Notes:
- N/A
By default stdenv strips all unused rpaths, but we use a few libraries
that are `dlopen`'d so we need to stop it from removing those. The
[`dontPatchELF`
flag](https://ryantm.github.io/nixpkgs/stdenv/stdenv/#var-stdenv-dontPatchELF)
disables that and makes the nix build work on wayland again.
Fix#26905Close#26864
Release Notes:
- N/A
Release Notes:
- Improved performance when using the scroll wheel and some other mouse
interactions.
Based on some cache details about GPUI `AnyView::cached` that I found in
the discussion of
https://github.com/zed-industries/zed/discussions/24260#discussioncomment-12135749,
and combined with the optimization points found in actual applications.
This change may have some scenarios that I have not considered, so I
just make a draft to put forward my ideas first for discussion.
From my analysis, `AnyView::cached` will always invalid by Div's mouse
events, because of it called `window.refresh`. I understand that (mouse
move event) this is because the interface changes related to hover and
mouse_move will be affected style, so `window.refresh` is required.
Since Div does not have the `entity_id` of View, it is impossible to
know which View should be refreshed, so the entire window can only be
refreshed.
With this change, we can reduce a lot of `render` method calls on
ScrollWheel or Mouse Event.
It looks like:
- https://github.com/zed-industries/zed/pull/26780
accidentally added a new event type, `AssistantThreadFeedback`, using
the old event system, that it didn't end up actually using, as the code
actually relies on using the newer (preferred) `telemetry::event!()`.
Release Notes:
- N/A
Stalebot has a maximum operations-per-run which is set at 1000. As a
result it may require multiple runs to successfully complete.
This morning it took [three
runs](https://github.com/zed-industries/zed/actions/runs/13921563707/attempts/1)
so set it to run three times two hours apart to avoid hitting github API
limits.
Release Notes:
- N/A
There apparently is some amdgpu/radv bug that rendering with
multisample anti-aliasing (MSAA) results in a crash when the bounds
of a triangle list exceed 1024px, which in Zed happens with the default
buffer font size when you select a line with more than 144 characters.
This crash has been reported as #26143.
This commit introduces a workaround: you can set the
ZED_PATH_SAMPLE_COUNT=0
environment variable to disable MSAA and the error message we print
when a GPU crash is encountered with radv now suggests trying this
environment
variable as a workaround and links the respective issue.
Sidenote: MSAA was introduced in
f08b1d78ec
so you didn't run into this driver bug with versions < 0.173.8.
Release Notes:
- Added a workaround for an AMD Linux driver bug that causes Zed to
crash when selecting long lines.
- Load syntax colors into commit message editors
- Fix name mismatches that were preventing the git commit grammar and
language config from being matched up
Release Notes:
- Fixed git commit messages not being syntax-highlighted
Quickfix of the docs as I read through and get familiar with the
assistant interface.
`prompt-library: toggle` does not appear to be a live command in
`cmd-shift-p` - instead I see `assistant: deploy prompt library`. This
change to the docs reflects that. It also notes that this command can
only be activated from within the assistant panel (the command is not
accessible from a standard editor panel).
Release Notes:
- N/A
This PR changes the git commit message editors to surface git's
suggested merge message, if any, as placeholder text, as opposed to
"real" buffer text as was previously the case.
Release Notes:
- Changed git commit message editors to use placeholder text for git's
suggested merge messages
Release Notes:
- Fixed involuntary joining of lines when typing in the commit message
editor
- Fixed being unable to type whitespace after a comment character at the
start of a line in the commit message editor
### DISCLAIMER
> As of 6th March 2025, debugger is still in development. We plan to
merge it behind a staff-only feature flag for staff use only, followed
by non-public release and then finally a public one (akin to how Git
panel release was handled). This is done to ensure the best experience
when it gets released.
### END OF DISCLAIMER
**The current state of the debugger implementation:**
https://github.com/user-attachments/assets/c4deff07-80dd-4dc6-ad2e-0c252a478fe9https://github.com/user-attachments/assets/e1ed2345-b750-4bb6-9c97-50961b76904f
----
All the todo's are in the following channel, so it's easier to work on
this together:
https://zed.dev/channel/zed-debugger-11370
If you are on Linux, you can use the following command to join the
channel:
```cli
zed https://zed.dev/channel/zed-debugger-11370
```
## Current Features
- Collab
- Breakpoints
- Sync when you (re)join a project
- Sync when you add/remove a breakpoint
- Sync active debug line
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Restart stack frame (if adapter supports this)
- Variables
- Loaded sources
- Modules
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Debug console
- Breakpoints
- Log breakpoints
- line breakpoints
- Persistent between zed sessions (configurable)
- Multi buffer support
- Toggle disable/enable all breakpoints
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Show collapsed stack frames
- Restart stack frame (if adapter supports this)
- Loaded sources
- View all used loaded sources if supported by adapter.
- Modules
- View all used modules (if adapter supports this)
- Variables
- Copy value
- Copy name
- Copy memory reference
- Set value (if adapter supports this)
- keyboard navigation
- Debug Console
- See logs
- View output that was sent from debug adapter
- Output grouping
- Evaluate code
- Updates the variable list
- Auto completion
- If not supported by adapter, we will show auto-completion for existing
variables
- Debug Terminal
- Run custom commands and change env values right inside your Zed
terminal
- Attach to process (if adapter supports this)
- Process picker
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Disconnect
- Restart
- Stop
- Warning when a debug session exited without hitting any breakpoint
- Debug view to see Adapter/RPC log messages
- Testing
- Fake debug adapter
- Fake requests & events
---
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>
Co-authored-by: Piotr <piotr@zed.dev>
#26935 is leading to bad edits, so let's revert it for now. I'll bring
back a version of this, but it'll likely just focus on indentation
instead of making the whole search fuzzy.
Release Notes:
- N/A
This PR makes it so the tool selector will stay open when toggling tools
instead of closing after each selection:
https://github.com/user-attachments/assets/eb987785-cfb5-4b07-8d63-510fbd9d9bf1
This involved making a change to `ContextMenu` to allow it to rebuild
its menu items after each confirmation in order for them to reflect
their selected/unselected status. I intend to clean up the `ContextMenu`
API a bit at a later point, but that is out of scope for this PR.
Release Notes:
- N/A
Fixes edge case where after carrying out all migrations if final text is
same as existing text, we don't need to ask user to do anything, despite
migrations edits are being applied internally. E.g. A -> B - > C -> A
Release Notes:
- N/A
In the process of adding `@mentions` we realized that we do not want to
make a distinction between Files & Directories in the UI, therefore this
PR combines the File & Directory pickers into a unified version
https://github.com/user-attachments/assets/f3bf189c-8b69-4f5f-90ce-0b83b12dbca3
(Ignore the `@mentions`, they are broken also on main)
Release Notes:
- N/A
Makes multibuffer headers less close to the top of the file.
Moves multibuffer line numbers one em to the right to make space for the
expand excerpt button on large line numbers.
Release Notes:
- N/A
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
This was added in #8343 to make it only visible for tests. #9189 then
made it visible regardless of `test-support`, so the definitions became
identical.
Release Notes:
- N/A
This PR makes the account age-related fields required in
`LlmTokenClaims`.
We've also removed the account age check from the LLM token issuance
endpoint, instead having it solely be enforced in the `POST /completion`
endpoint.
This change will be safe to deploy at ~8:01PM EDT.
Release Notes:
- N/A
This PR defers the account age check to the `POST /completion` endpoint
instead of doing it when an LLM token is generated.
This will allow us to lift the account age restriction for using Edit
Prediction.
Note: We're still temporarily performing the account age check when
issuing the LLM token until this change is deployed and the LLM tokens
have had a chance to cycle.
Release Notes:
- N/A
This PR cleans up the LLM token creation a bit.
We now pass in the entire list of feature flags to the
`LlmTokenClaims::create` method to prevent having a bunch of confusable
`bool` parameters.
Release Notes:
- N/A
Previously, when clicking on the branch, the popover would obscure the
button you just clicked, which was awkward.
Release Notes:
- Improved the placement of the repo and branch picker popovers in the
git panel.
- Added a 'SelectRepo' action that opens the repository selector in a
modal.
When the model reads file, we'll track the version it read, and let it
know if the user makes edits to the buffer. This helps prevent edit
failures because it'll know to re-read the file before.
Release Notes:
- N/A
Closes#25458
When navigating code from a preview tab with
`enable_preview_from_code_navigation` set to `true`, "Go Back" from a
newly opened tab could focus on the tab to the right instead of
returning to the original preview tab.
Before, we killed the existing preview tab before opening a new one,
which breaking history as the new tab had no reference to the old one.
This caused navigation to shift to the next tab on the right.
Now, we first add the new tab at the preview index, and then kill the
existing preview tab. This preserves the history by linking new preview
tab to existing tab.
Release Notes:
- Fixes an issue where navigating code from a preview tab with
`enable_preview_from_code_navigation` set to `true`, "Go Back" from a
newly opened tab could focus on the tab to the right instead of
returning to the original preview tab.
I thought it might be just `test_file_status` this time, but it seems to
be all four of the tests that we were previously seeing issues with.
Release Notes:
- N/A
Closes #ISSUE
Release Notes:
- Git action buttons are now synced between the project diff and git
panel
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>
This is a follow up to #26809, introducing `git.hunk_style` setting to
control whether staged or unstaged hunks are shown as hollow.
Reused `GitHunkStyleSetting` which was left over from #26504.
Release Notes:
- Added `git.hunk_style` setting to control whether staged or unstaged
hunks are hollow.
We'll now include the search/replace block that got applied as part of
the tool output. We think this will help the model have a better idea of
how the file changed and prevent later edit failures.
Release Notes:
- N/A
I vibe coded this in Zed, dawg.
This avoids a number of cases where we created multiple copies of the
same lsp adapter. Now we clone the Arcs.
Release Notes:
- N/A
I saw over the weekend some social media posts that indicated people
didn't know which languages are included in Zed by default. We do say
that on each language-specific page, but I figured having this
high-level view on the languages page wouldn't hurt.
Release Notes:
- N/A
This PR refactors the constructors for the various Git hosting providers
to facilitate adding support for more self-hosted variants.
Release Notes:
- N/A
Without this, we running into the following error:
```
Running into this when running tests. Is this
dyld[45041]: Library not loaded: @rpath/WebRTC.framework/WebRTC
Referenced from: <B2EA63A5-994E-3FB0-A74B-C9C4F7E5C1EF> /Users/aguz/zed/zed/target/debug/deps/assistant_tools-522d7745dd439dfb
Reason: no LC_RPATH's found
```
Thanks Piotr!
Release Notes:
- N/A
Our direnv integration was making zed refuse to auto-update when you had
the zed repo open with the devshell active. This was happening even when
you used a non-nix build of zed, which actually should be able to
auto-update.
I'm a bit unsure of why we check for the `ZED_UPDATE_EXPLANATION` env
var [both at build time _and_ at
runtime](2828dcb67b/crates/auto_update/src/auto_update.rs (L149)),
but I can see an argument for why people might want that so I'll just do
the less intrusive change for now and leave the var out of the devshell.
Release Notes:
- N/A
Closes#4640
About the support limit of Fn:
Mac F1-F35
Win F1-F24
Linux F1-F35
Terminal F1-F20
Release Notes:
- Improved support for extended keyboards on Mac (F20-F35)
http-client pulled in rustls which in turn meant that gpui depended on
rustls/aws-lc-sys. This commit extracts http-client-tls crate to
separate the http-client and tls dependencies.
Closes #ISSUE
Release Notes:
- N/A
In `layout_excerpt_gutter`, compute max line number length once instead
of for every row
In `max_line_number_width`, use ilog10 instead of converting to floats
and back
Release Notes:
- N/A
This PR removes the `migration_checks` job as a required check.
This was not required before, and we shouldn't make it required, as
there are cases where we need to bypass it, as is the case in
https://github.com/zed-industries/zed/pull/26832.
Release Notes:
- N/A
This PR reverts some of the changes made to `Cargo.lock` in #25702. In
that PR, several crate versions were unintentionally downgraded,
including `aws-lc-rs`, which has caused release builds to fail on
Windows again.
Release Notes:
- N/A
Similar to how tasks are fetched via LSP, also queries for document's
code lens and filters the ones with the commands, supported in server
capabilities.
Whatever's left and applicable to the range given, is added to the
actions menu:
This way, Zed can get more actions to run, albeit neither r-a nor vtsls
seem to provide anything by default.
Currently, there are no plans to render code lens the way as in VSCode,
it's just the extra actions that are show in the menu.
------------------
As part of the attempts to use rust-analyzer LSP data about the
runnables, I've explored a way to get this data via standard LSP.
When particular experimental client capabilities are enabled (similar to
how clangd does this now), r-a starts to send back code lens with the
data needed to run a cargo command:
```
{"jsonrpc":"2.0","id":48,"result":{"range":{"start":{"line":0,"character":0},"end":{"line":98,"character":0}},"command":{"title":"▶︎ Run Tests","command":"rust-analyzer.runSingle","arguments":[{"label":"test-mod tests::ecparser","location":{"targetUri":"file:///Users/someonetoignore/work/ec4rs/src/tests/ecparser.rs","targetRange":{"start":{"line":0,"character":0},"end":{"line":98,"character":0}},"targetSelectionRange":{"start":{"line":0,"character":0},"end":{"line":98,"character":0}}},"kind":"cargo","args":{"environment":{"RUSTC_TOOLCHAIN":"/Users/someonetoignore/.rustup/toolchains/1.85-aarch64-apple-darwin"},"cwd":"/Users/someonetoignore/work/ec4rs","overrideCargo":null,"workspaceRoot":"/Users/someonetoignore/work/ec4rs","cargoArgs":["test","--package","ec4rs","--lib"],"executableArgs":["tests::ecparser","--show-output"]}}]}}}
```
This data is passed as is to VSCode task processor, registered in
60cd01864a/editors/code/src/main.ts (L195)
where it gets eventually executed as a VSCode's task, all handled by the
r-a's extension code.
rust-analyzer does not declare server capabilities for such tasks, and
has no `workspace/executeCommand` handle, and Zed needs an interactive
terminal output during the test runs, so we cannot ask rust-analyzer
more than these descriptions.
Given that Zed needs experimental capabilities set to get these lens:
60cd01864a/editors/code/src/client.ts (L318-L327)
and that the lens may contain other odd tasks (e.g. docs opening or
references lookup), a protocol extension to get runnables looks more
preferred than lens:
https://rust-analyzer.github.io/book/contributing/lsp-extensions.html#runnables
This PR does not include any work on this direction, limiting to the
general code lens support.
As a proof of concept, it's possible to get the lens and even attempt to
run it, to no avail:
Release Notes:
- Used `textDocument/codeLens` data in the actions menu when applicable
Closes https://github.com/zed-industries/zed/issues/13111
Release Notes:
- vim: Added global marks `'[A-Z]`
- vim: Added persistence for global (and local) marks. When re-opening
the same workspace your previous marks will be available.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
If the user has the `auto_reveal` option enabled, as well as
`file_scan_inclusions` and opens a file that is gitignored but is also
set to be always included, that file won't be revealed in the project
panel. I've personally found this annoying, as the project panel can
provide useful context on where you are in a codebase. It also just
feels weird for it to be out of sync with the editor state.
Release Notes:
- Fixed the interaction between `auto_reveal`, `file_scan_inclusions`,
and `.gitignore` within the Project Panel. Files that are always
included will now be auto-revealed in the Project Panel, even if those
files are also gitignored.
Adds documentation for the icon theme setting (mostly based on the
documentation from theme but adjusted for icon theme).
Release Notes:
- N/A
---------
Co-authored-by: Peter Tripp <peter@zed.dev>
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Fixes the selection highlight appearing in single-line editors like the
file picker, command palette, etc.
Release Notes:
- Fixed selection highlight appearing in input fields like the file
picker, command palette, etc.
Closes#14349
When typing quotes immediately after a word character, it resulted in
auto-closing the quote.
```js
const thing = this is text^;
```
Typing a quote resulted in `this is text""^;` which is not correct, and
should be `this is text"^;`.
This PR changes logic for auto close:
1. We now prevent auto-closing in case of brackets where start == end
when they're typed immediately after a word character. i.e. For, ``` `,
", ' ```.
2. Other bracket pairs like `{}, (), etc` continue to auto-close
regardless of preceding character. So, `func^` to `func()^` will keep
working.
3. Auto-closing in other contexts like after spaces, punctuation, etc.
will still work.
Before:
After:
Release Notes:
- Fixed auto-paired quotes being inserted when typing a quote
immediately next to a word character.
This PR fixes a rare case where icons could be missing in the language
selector.
Currently, whilst looking up an icon, all file suffixes starting with a
dot are filtered out. While this works fine for some languages, there
are some languages having only file suffixes starting with a dot, e.g.
the "Git Attributes" language provided from the "Git Firefly" extension.
This results in no icon being displayed in the list, as shown in the
screenshots below.
To solve this, we can just simply remove the check for this special case
as well as the construction of an artificial file name in the code, as
both are not needed. A simple path just consisting of the extension is
sufficient, as we currently do not differentiate between file names and
file suffixes during an icon lookup. see the relevant code below:
013a646799/crates/file_icons/src/file_icons.rs (L23-L52)
As the first lookup is directly done using the entire file name and then
checked against all suffixes, we actually do not have to construct an
artificial file name at all. Should that produce no match, we check for
a hidden file right after, so we do not have to filter hidden file names
out.
With this fix, nothing changes for "normal" file suffixes, for some
cases where languges provide entire file names as a path suffix, the
matching might improve, and for languages with only hidden associated
file names, the initially described issue is resolved.
I do believe the behavior of matching icons to languages could be
improved in general. Fowever, I do think this is beyond the scope of
this change.
| Current main | <img width="546" alt="main"
src="https://github.com/user-attachments/assets/5c3c9fdc-cadf-4e44-9667-2530374aa0d2"
/> |
| --- | --- |
| This PR |<img width="546" alt="PR"
src="https://github.com/user-attachments/assets/82e59108-e31f-4ca9-8bbd-b9fd2b34feb0"
/>|
Aditionally, in 4395f78fb2 I refactored
the code which acquires the label and icon for a match, since I found it
a bit hard to read initially. The majority of this diff comes from this
change. Should that not be wanted, I can revert that change.
Release Notes:
- Fixed a rare case where languages had no associated icon in the
language selector.
When the user attached context in the thread, the editor model request
would fail because its tool use wouldn't be removed properly leading to
an API error.
Also, after an edit, we'd keep the old file snapshot in the context.
This would make the model think that the edits didn't apply and make it
go in a loop.
Release Notes:
- N/A
Closes #ISSUE
[git: Use font size to determine pattern slash width
#26446](https://github.com/zed-industries/zed/pull/26446)
This PR only uses font size as the slant line width, and here it further
uses line height as the slant line interval control.
before
now
big line height
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Very small change, simply changing the order of the futures we pass to
`select_biased!` so that if the format request and the timeout resolve
at the same time (highly unlikely) we choose the format request instead
of choosing the timeout and throwing away our work!
Release Notes:
- N/A
Closes#26777
This PR fixes a panic when a file name contains a newline and a
multi-byte character like 👋 (4 bytes in UTF-8). The issue was in the
regex not considering newlines in file names, causing it to match only
the latter part of the file name.
For example:
```
left: PathWithPosition { path: "ab", row: None, column: None } // matched
right: PathWithPosition { path: "ab\ncd", row: None, column: None } // actual file name
```
This resulted in incorrect index calculation later in the code, which
went unnoticed until now due to the lack of tests with file names
containing newlines.
We discovered this issue when a panic occurred due to incorrect index
calculation while trying to get the index of a multi-byte character.
After the newline fix, the index calculation is always correct, even in
the case of multi-byte characters.
Release Notes:
- Fixed an issue where file names with newlines and multi-byte
characters could cause a crash in certain cases.
This PR introduces the arguments `seed` and `seeds` to `gpui::test`,
e.g.:
- `#[gpui::test(seed = 10)]`
- `#[gpui::test(seeds(10, 20, 30, 40))]`
Which allows us to run a test against a specific seed value without
slowing
down our tests like `iterations` does with high values.
This was motivated by a diff hunk test that only fails in a 400+ seed,
but is
slow to run 400+ times for every `cargo test`.
If your test failed with a specific seed, you can now add the `seed` arg
to
increase the chances of detecting a regression.
There are now three ways of setting seeds, the `SEED` env var,
`iterations`,
and the args this PR adds. See docs in `gpui::test`.
---
I also relaxed the limitation on `retries` not working with
`iterations`, as
that seemed unnecessary.
Release Notes:
- N/A
Follow-up of https://github.com/zed-industries/zed/pull/26410
* Extract word completions into their own, `editor::ShowWordCompletions`
action so those could be triggered independently of completions
* Assign `ctrl-shift-space` binding to this new action
* Still keep words returned along the completions as in the original PR,
but:
* Tone down regular completions' fallback logic, skip words when the
language server responds with empty list of completions, but keep on
adding words if nothing or an error were returned instead
* Adjust the defaults to wait for LSP completions infinitely
* Skip "words" with digits such as `0_usize` or `2.f32` from completion
items, unless a completion query has digits in it
Release Notes:
- N/A
When copilot is not being used as the edit prediction provider and you
open a fresh Zed instance, we don’t run the copilot language server.
This is because copilot chat is purely handled via oauth token and
doesn’t require the language server.
In this case, if you click sign out, instead of asking the language
server to sign out (which isn’t running), we can manually clear the
config directory, which contains the oauth tokens. We already watch this
directory, and if the token is not found, we update the sign-in status.
Release Notes:
- N/A
Take 2 on https://github.com/zed-industries/zed/pull/26600. Now, it
doesn't break remote development.
Instead of using it in `build_classes`, it's now used in the `open`
method while creating a window. I found similar usage in other places
over internet.
Release Notes:
- Fixed issue where Zed would show mac native tabs when opening new
fullscreen windows on macOS.
Closes#25883
This PR allows you to use copilot chat for assistant without setting
copilot as the edit prediction provider.
[copilot.webm](https://github.com/user-attachments/assets/fecfbde1-d72c-4c0c-b080-a07671fb846e)
Todos:
- [x] Remove redudant "copilot" key from settings
- [x] Do not disable copilot LSP when `edit_prediction_provider` is not
set to `copilot`
- [x] Start copilot LSP when:
- [x] `edit_prediction_provider` is set to `copilot`
- [x] Copilot sign in clicked from assistant settings
- [x] Handle flicker for frame after starting LSP, but before signing in
caused due to signed out status
- [x] Fixed this by adding intermediate state for awaiting signing in in
sign out enum
- [x] Handle cancel button should sign out from `copilot` (existing bug)
- [x] Handle modal dismissal should sign out if not in signed in state
(existing bug)
Release Notes:
- You can now sign into Copilot from assistant settings without making
it your edit prediction provider. This is useful if you want to use
Copilot chat while keeping a different provider, like Zed, for
predictions.
- Removed the `copilot` key from `features` in settings. Use
`edit_prediction_provider` instead.
This adds code to merge excerpts when you expand them and they would
overlap. It is only enabled for callers who use the
`set_excerpts_for_path` API for multibuffers (which is currently just
project diff), as other users of multibuffer care too much about the
exact excerpts that they have.
Release Notes:
- N/A
Closes#4770
(really closes issue described in [this
comment](https://github.com/zed-industries/zed/issues/4770#issuecomment-2258728884)
on #4770)
Only implemented for MacOS and Linux for now as I have no way to test on
Windows or BSD.
PRs welcome!
Release Notes:
- Added support for reading from anonymous file descriptors (e.g.
created as part of process substitution) on MacOS and Linux
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [clap](https://redirect.github.com/clap-rs/clap) |
workspace.dependencies | patch | `4.5.31` -> `4.5.32` |
---
### Release Notes
<details>
<summary>clap-rs/clap (clap)</summary>
###
[`v4.5.32`](https://redirect.github.com/clap-rs/clap/blob/HEAD/CHANGELOG.md#4532---2025-03-10)
[Compare
Source](https://redirect.github.com/clap-rs/clap/compare/v4.5.31...v4.5.32)
##### Features
- Add `Error::remove`
##### Documentation
- *(cookbook)* Switch from `humantime` to `jiff`
- *(tutorial)* Better cover required vs optional
##### Internal
- Update `pulldown-cmark`
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xOTQuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwMC4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [ctor](https://redirect.github.com/mmastrac/rust-ctor) |
workspace.dependencies | patch | `0.4.0` -> `0.4.1` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xOTQuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwMC4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [rsa](https://redirect.github.com/RustCrypto/RSA) |
workspace.dependencies | patch | `0.9.7` -> `0.9.8` |
---
### Release Notes
<details>
<summary>RustCrypto/RSA (rsa)</summary>
###
[`v0.9.8`](https://redirect.github.com/RustCrypto/RSA/blob/HEAD/CHANGELOG.md#098-2025-03-12)
[Compare
Source](https://redirect.github.com/RustCrypto/RSA/compare/v0.9.7...v0.9.8)
##### Added
- Doc comments to specify the `rand` version ([#​473])
[#​473]: https://redirect.github.com/RustCrypto/RSA/pull/473
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xOTQuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwMC4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [schemars](https://graham.cool/schemars/)
([source](https://redirect.github.com/GREsau/schemars)) |
workspace.dependencies | patch | `0.8.21` -> `0.8.22` |
---
### Release Notes
<details>
<summary>GREsau/schemars (schemars)</summary>
###
[`v0.8.22`](https://redirect.github.com/GREsau/schemars/blob/HEAD/CHANGELOG.md#0822---2025-02-25)
[Compare
Source](https://redirect.github.com/GREsau/schemars/compare/v0.8.21...v0.8.22)
##### Fixed:
- Fix compatibility with rust 2024 edition
([https://github.com/GREsau/schemars/pull/378](https://redirect.github.com/GREsau/schemars/pull/378))
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xOTQuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwMC4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Release Notes:
- Multibuffers now use less vertical space for excerpt boundaries.
Additionally the expand up/down arrows are hidden at the start and end
of the buffers
---------
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
Co-authored-by: Zed AI <claude-3.5-sonnet@zed.dev>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [quote](https://redirect.github.com/dtolnay/quote) |
workspace.dependencies | patch | `1.0.38` -> `1.0.40` |
---
### Release Notes
<details>
<summary>dtolnay/quote (quote)</summary>
###
[`v1.0.40`](https://redirect.github.com/dtolnay/quote/releases/tag/1.0.40)
[Compare
Source](https://redirect.github.com/dtolnay/quote/compare/1.0.39...1.0.40)
- Optimize construction of lifetime tokens
([#​293](https://redirect.github.com/dtolnay/quote/issues/293),
thanks [@​aatifsyed](https://redirect.github.com/aatifsyed))
###
[`v1.0.39`](https://redirect.github.com/dtolnay/quote/releases/tag/1.0.39)
[Compare
Source](https://redirect.github.com/dtolnay/quote/compare/1.0.38...1.0.39)
- Documentation improvements
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xOTQuMSIsInVwZGF0ZWRJblZlciI6IjM5LjE5NC4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [env_logger](https://redirect.github.com/rust-cli/env_logger) |
workspace.dependencies | patch | `0.11.6` -> `0.11.7` |
---
### Release Notes
<details>
<summary>rust-cli/env_logger (env_logger)</summary>
###
[`v0.11.7`](https://redirect.github.com/rust-cli/env_logger/blob/HEAD/CHANGELOG.md#0117---2025-03-10)
[Compare
Source](https://redirect.github.com/rust-cli/env_logger/compare/v0.11.6...v0.11.7)
##### Internal
- Replaced `humantime` with `jiff`
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xOTQuMSIsInVwZGF0ZWRJblZlciI6IjM5LjE5NC4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Partially addresses #25698
Part of why autocomplete suggestions for `keymap.json` aren't great is
because `:` is (correctly) considered a punctuation character, rather
than a word character, in JSON. But since `::` is part of the name of
zed commands, it means that the autocomplete context window loses
context after the user types colon:
Suggestion here is to use overrides for JSON and JSONC such that colon
is considered a word character when it's inside a string. This improves
the experience:
I believe this is more broadly correct anyway, since `:` loses it's
punctuation meaning when inside a string.
Hope this is helpful!
Release Notes:
- Improved autocomplete for keymap.json by treating `::` like word characters when inside a string.
Closes#26472
Release Notes:
- On macOS, switched to using the system's git binary to create commits.
This fixes issues that some users were seeing with pre-commit hooks.
Compatibility note: after this change, it is no longer possible to
commit from Zed unless git is installed.
This PR updates the `Thread::is_streaming` method so that it includes
tool use in the "streaming" state.
This will prevent the streaming indicator from disappearing when we're
doing tool use.
Release Notes:
- N/A
Remove the git beta issue template.
Improve ci.yml `job_spec` so that changes like this will not require CI in the future.
Improve ci.yml `job_spec` ensuring `output.run_license` exported for Cargo.lock.
Release Notes:
- N/A
---------
Co-authored-by: Peter Tripp <peter@zed.dev>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [proc-macro2](https://redirect.github.com/dtolnay/proc-macro2) |
workspace.dependencies | patch | `1.0.93` -> `1.0.94` |
---
### Release Notes
<details>
<summary>dtolnay/proc-macro2 (proc-macro2)</summary>
###
[`v1.0.94`](https://redirect.github.com/dtolnay/proc-macro2/releases/tag/1.0.94)
[Compare
Source](https://redirect.github.com/dtolnay/proc-macro2/compare/1.0.93...1.0.94)
- Documentation improvements
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xOTQuMSIsInVwZGF0ZWRJblZlciI6IjM5LjE5NC4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Follow up to:
- https://github.com/zed-industries/zed/pull/26551
We need the "Tests Pass" step to run `if: always()`.
Turns out when it's 'skipped', it counts as 'passing' with respect to
required status checks.
Release Notes:
- N/A
- [x] Fix `[un]stage` hunk operations cancelling pending ones
- [x] Add test
- [ ] bugs I stumbled upon (try to repro again before merging)
- [x] holding `git::StageAndNext` skips hunks randomly
- [x] Add test
- [x] restoring a file keeps it in the git panel
- [x] Double clicking on `toggle staged` fast makes Zed disagree with
`git` CLI
- [x] checkbox shows ✔️ (fully staged) after a single
stage
Release Notes:
- N/A
---------
Co-authored-by: Cole <cole@zed.dev>
Co-authored-by: Max <max@zed.dev>
Fixes a few problems,
- Uses `Boundary::Grid` instead of `Boundary::Cursor` for highlighted
range adjustments.
This fixes quite a few wierd behaviors around highlighting paths that
had to be scrolled into view (i.e. were in the terminal history)
including the issue described in the release notes as well as a
regression caused by #26401 where the highlight range would span from
the start of the path to the cursor location in the shell prompt
- Strips all trailing `:`s from the paths, updating the highlighted
range accordingly.
This worked fine before and is just a visual improvement.
Release Notes:
- Fixed an issue where file paths in the terminal surrounded by `()` or
`[]` would not be highlighted properly
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [async-trait](https://redirect.github.com/dtolnay/async-trait) |
workspace.dependencies | patch | `0.1.86` -> `0.1.87` |
---
### Release Notes
<details>
<summary>dtolnay/async-trait (async-trait)</summary>
###
[`v0.1.87`](https://redirect.github.com/dtolnay/async-trait/releases/tag/0.1.87)
[Compare
Source](https://redirect.github.com/dtolnay/async-trait/compare/0.1.86...0.1.87)
- Documentation improvements
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xOTQuMSIsInVwZGF0ZWRJblZlciI6IjM5LjE5NC4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Closes#26541
Release Notes:
- Fixed a bug that prevented putting the cursor after a deletion hunk at
the end of a file, in the absence of trailing newlines
---------
Co-authored-by: Max <max@zed.dev>
Because of #26562, it is now possible to subscribe to extension update
events within the LSP store, where we can then update the Schemas sent
to the JSON LSP resulting in dynamic updates to the auto-complete
suggestions and diagnostics in settings. Notably, this means newly
installed languages and (icon) themes will auto-complete correctly as
soon as the extension is installed.
Closes#15436
Release Notes:
- Fixed an issue where autocomplete suggestions and diagnostics for
languages and (icon) themes in settings would not update when the
extension with which they were added was installed or uninstalled
Let's see if the speed of `windows-2025-32` for `windows_tests` is
fast-enough for PRs and everywhere else use `windows-2025-16`. Leaving
`windows_clippy` unchanged with `windows-2025-16`.
Release Notes:
- N/A
Instead of getting the whole text from the buffer, replacing with
`String::replace`, and getting a whole diff, we'll now use `SearchQuery`
to get a range, diff only that range, and apply it (all in the
background).
When we match zero strings, we'll record a "bad search", keep going and
report it to the model at the end.
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
This PR cleans up some color & elevation misc.
### Don't allow deriving Color from Hsla
The point of the [ui::Color] enum is to encourage consistent color
usage, and the the Color::Custom case is really only meant for cases
where we have no other choice.
`impl From<Hsla> for Color` encourages blindly passing colors into
`Color::Custom` – with this in place we might as well remove the entire
`Color` enum.
The usages that were updated due to this removal were for colors that
already exist in the Color enum, making it even more clear that it
didn't make sense to have this.
### `ElevationIndex` -> `Elevation`
This name would make more sense if we had an `Elevation` in the first
place. The new name is more clear.
#### `Button::elevation`
As part of this change I also updated button's `layer` method to
`elevation`, since it takes an elevation. This method still has the
following issue:
You want to use `Button::elevation` when it's default colors are
invisible on the layer you are rendering the button on. However, current
this method uses the elevation's `bg` color, rather than it's
`on_elevation_bg`.
Ideally when you use `Button::elevation` you want to pass the elevation
you are _on_, not choosing one that will show up the elevation you are
on.
This change will be in a separate PR, as it likely will have widespread
visual impact across the app.
Release Notes:
- N/A
As I was writing a blog post about Edit Prediction, I realized we didn't
have a great section in the docs I could link to talking about
configuring it. We weren't: 1) explicitly exposing the settings code to
add Zed as the edit prediction provider, and 2) not showing an image of
the title bar banner.
Release Notes:
- N/A
Adds an `debug: edit tool` action that opens a new view which will help
us debug the edit tool internals. As the edit tool runs, the log
displays:
- Instructions provided by the main model
- Response stream from the editor model
- Parsed edit blocks
- Tool output provided back to main model
The log automatically records all edit tool interactions for staff, so
if you notice something weird, you can debug it retroactively without
having to open the debug tool first. We may want to limit the number of
recorded requests later.
I have a few more ideas for it, but this seems like a good starting
point.
https://github.com/user-attachments/assets/c61f5ce8-08b1-4500-accb-db2a480eb3ab
Release Notes:
- N/A
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [anyhow](https://redirect.github.com/dtolnay/anyhow) |
workspace.dependencies | patch | `1.0.96` -> `1.0.97` |
---
### Release Notes
<details>
<summary>dtolnay/anyhow (anyhow)</summary>
###
[`v1.0.97`](https://redirect.github.com/dtolnay/anyhow/releases/tag/1.0.97)
[Compare
Source](https://redirect.github.com/dtolnay/anyhow/compare/1.0.96...1.0.97)
- Documentation improvements
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xOTQuMSIsInVwZGF0ZWRJblZlciI6IjM5LjE5NC4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
While the `.{variants}` of the theme keys _were_ incorrect, they are
actually more consistent with our current theme keys (thanks AI!) So we
will keep theme, and fix the incorrect usages in the one themes and
elsewhere.
Old description:
>
> This PR fixes an issue where we specified the incorrect theme keys
(thanks AI!) > in the theme schema. The following keys have been changed
to their correct > versions:
>
> | Before | After |
> |-------------------------------|-------------------------|
> | version_control.added | version_control_added |
> | version_control.deleted | version_control_deleted |
> | version_control.modified | version_control_modified|
> | version_control.renamed | version_control_renamed |
> | version_control.conflict | version_control_conflict|
> | version_control.ignored | version_control_ignored |
>
> Please use the after versions in your themes, as they are correct!
>
> We won't be adding secondary keys to fix this automatically as git
only > officially launched today.
>
> Due to this change, we've also updated the version control keys in the
One > themes to keep the default diff hunks looks from changing.
Closes#26572
Release Notes:
- theme: Fixed an issue where version control colors weren't applying
correctly.
Refactor GitHub actions CI workflow.
- Single combined 'tests_pass' action so we only need one mandatory
check for merge queue
- Add new `job_spec` job which determines what needs to be run (+5secs)
- Do not run full CI for docs only changes (~30secs vs 10+mins)
- Only run `script/generate-licenses` if Cargo.lock changed (saves
~23secs on mac_test)
- Move prettier /docs check to ci.yml and remove docs.yml
- Run Windows tests on every PR commit
- Added new Windows runners named to reflect their OS/capacity
(windows-2025-64, windows-2025-32, windows-2025-16)
Release Notes:
- N/A
This PR updates the `ToolWorkingSet` to reduce the amount of locking we
need to do.
A number of the methods have had corresponding versions moved to the
`ToolWorkingSetState` so that we can take out the lock once and do a
number of operations without needing to continually acquire and release
the lock.
Release Notes:
- N/A
This adds the ability for the editor to implement hard wrap (similar to
"textwidth" in vim).
If you are typing and your line extends beyond the limit, a newline is
inserted before the most recent space on the line. If you are otherwise
editing the line, pasting, etc. then you will need to manually rewrap.
Release Notes:
- git: Commit messages are now wrapped "as you type" to 72 characters.
This moves spawning of the git subprocess to the main thread. We're not
yet
sure why, but when we spawn a process using GCD's background queues,
sub-processes like git-credential-manager fail to open windows.
This seems to be fixable either by using the main thread, or by using a
standard background thread,
but for now we use the main thread.
Release Notes:
- Git: Fix git-credential-manager
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Kirill Bulatov <mail4score@gmail.com>
Closes https://github.com/zed-industries/zed/issues/26431
Follow-up of https://github.com/zed-industries/zed/pull/26174
`path_with_position.path.strip_prefix(&worktree_root)` used in the PR is
wrong for cases of single-file worktrees, where it will return empty
paths that will result in incorrect project and FS entries accessed.
Release Notes:
- Fixed goto single file worktrees during terminal cmd-clicks
Closes https://github.com/zed-industries/zed/issues/4957https://github.com/user-attachments/assets/ff491378-376d-48ec-b552-6cc80f74200b
Adds `"completions"` language settings section, to configure LSP and
word completions per language.
Word-based completions may be turned on never, always (returned along
with the LSP ones), and as a fallback if no LSP completion items were
returned.
Future work:
* words are matched with the same fuzzy matching code that the rest of
the completions are
This might worsen the completion menu's usability even more, and will
require work on better completion sorting.
* completion entries currently have no icons or other ways to indicate
those are coming from LSP or from word search, or from something else
* we may work with language scopes more intelligently, group words by
them and distinguish during completions
Release Notes:
- Supported word-based completions
---------
Co-authored-by: Max Brunsfeld <max@zed.dev>
Closes #ISSUE
Release Notes:
- Fix Bug where unstage/stage all in project diff wouldn't work while
git panel was closed
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Previously, if a user clicked a button and moved the cursor out before
releasing, the click event was correctly prevented, but the pending
mouse-down state remained.
This caused unintended drags when the UI shifted due to magnification
settings.
Now, mouse-up clears the pending state:
- If over the button → clear state and trigger click handlers.
- If outside the button → clear state without triggering a click.
This avoids accidental drags while preserving expected click behavior.
Closes#24600
Release Notes:
- N/A
---------
Co-authored-by: Ben Kunkle <ben@zed.dev>
This PR adds a new `ExtensionEvents` event bus that can be used to
listen for extension-related events throughout the app.
Today you need to have a handle to the `ExtensionStore` (which entails
depending on `extension_host`) in order to listen for extension events.
With this change subscribers only need to depend on `extension`, which
has a leaner dependency graph.
Release Notes:
- N/A
Assertions on the parsed system prompt should use CRLF on Windows. I
didn't see it before because I was testing on my Windows VM from a
shared folder I cloned on macOS.
Release Notes:
- N/A
Closes#26534
Recently, we fixed a title bar transparency issue that only occurred on
macOS 15.3 and later. PR:
https://github.com/zed-industries/zed/pull/26403
However, this seems to have broken multi-window fullscreen behavior on
earlier macOS versions. This PR adds versioning so that the title bar
transparency fix only applies to macOS 15.3.0 and later.
No release notes, as this bug only exists on main right now.
Release Notes:
- N/A
Co-authored-by: MrSubidubi <dev@bahn.sh>
#26538 fixed part of the issue, but it would keep trailing carriage
returns in the old/new strings. The model is unlikely to produce those,
but we might as well support them.
Release Notes:
- N/A
Disables https://github.com/zed-industries/zed/pull/26146 until a better
way to add diagnostics is found.
Overall, the PR had made changes that are worth keeping instead of
reverting, such as finally extracting out r-a's language server logic
into an `_ext.rs` file.
Release Notes:
- N/A
This should be less eager in terms of invoking tools. But we should keep
iterating on it as we add more tools.
Also, this disables the Lua interpreter by default (it can still be
enabled manually from the tools icon).
Release Notes:
- N/A
---------
Co-authored-by: Richard Feldman <oss@rtfeldman.com>
Exposes a new "edit files" tool that the model can use to apply
modifications to files in the project. The main model provides
instructions and the tool uses a separate "editor" model (Claude 3.5 by
default) to generate search/replace blocks like Aider does:
````markdown
mathweb/flask/app.py
```python
<<<<<<< SEARCH
from flask import Flask
=======
import math
from flask import Flask
>>>>>>> REPLACE
```
````
The search/replace blocks are parsed and applied as they stream in. If a
block fails to parse, the tool will apply the other edits and report an
error pointing to the part of the input where it occurred. This should
allow the model to fix it.
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Closes #ISSUE
Release Notes:
- Git Beta: fixed an issue where pressing `up` or `down` in the git
panel's commit message editor would change the selected status entry
This PR does not close an issue, but it is an issue and and fix in one.
I hope this is ok, but please let me know if you prefer me to open an
issue before.
Release Notes:
- Add "copy permalink" action for self-hosted GitHub enterprise
instances
# Issue
### Related issues:
* https://github.com/zed-industries/zed/issues/26393
* https://github.com/zed-industries/zed/issues/11043
When you try to copy a permalink from a self-hosted GitHub enterprise
instance, you get the following error:
<img width="383" alt="permalink"
src="https://github.com/user-attachments/assets/b32338a7-a2d7-48fc-86bf-ade1d32ed1f7"
/>
You also cannot open a PR or commit when you hover over a git blame:
https://github.com/user-attachments/assets/a5491ce7-270b-412f-b9ac-027ec020b028
### Reproduce
If you do not have access to a self-hosted GitHub instance, you can
change the remote url of any git repo:
```
git remote set-url origin git@github.mycorp.com:nilskch/zed.git
```
With the fix, permalinks still won't bring you to a valid website, but
you can verify that they are correctly created.
# Solution
Currently, we only support detecting self-hosted GitLab instances, but
not self-hosted GitHub instances. We detect GitLab instances by checking
if "gitlab" is part of the git URL.
This PR adds the same logic to detect self-hosted GitHub enterprise
instances (by checking if "github" is in the URL).
This solution is not ideal, since self-hosted GitHub or GitLab instances
might not contain the word "github" or "gitlab". #26393 proposes adding
a setting that would allow users to map specific domains to their
corresponding git provider types. This mapping would help Zed correctly
identify the appropriate git instance, even if "gitlab" or "github" are
not part of the URL.
This PR does not implement the offered solution, but I added a TODO
where the fix for #26393 has to make changes.
Previously, when a file was deleted externally and the warning prompt
was dismissed with "Close", the panel remained but was empty, leaving an
unused split space.
This happened because pane.remove_item(...) was being called with
close_pane_if_empty set to false, preventing the panel from being
removed even when it had no remaining items.
This fix changes the third boolean parameter to true, ensuring that the
panel is removed if it becomes empty, allowing the layout to properly
resize.
Closes#23904
Release Notes:
- N/A
Known Issues:
- When items can horizontal scroll, the right selected border is hidden
TODO:
- [ ] Width calculation is off
- [ ] When scrollbars should autohide they don't until hovering the
panel
- [ ] When switching to and from scrollbar track being visible we are
missing a notify somewhere.
Release Notes:
- Git Panel: Added horizontal scrolling in the git panel
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Cole Miller <m@cole-miller.net>
Co-authored-by: Cole Miller <cole@zed.dev>
This PR refactors the `ContextMenu::render` method to extract a couple
smaller methods from it.
The existing `render` method was suffering from its size, with some of
the `match` arms not being able to be formatted with `rustfmt`.
Release Notes:
- N/A
Release Notes:
- Git Beta: improved the stage-and-next and unstage-and-next actions in
the project diff editor to start a commit after acting on the last hunk
The notifications from git output could take up variable amounts of
screen space, and they were quite obnoxious when a git command printed
lots of output, such as fetching many new branches or verbose push
hooks.
This change makes the push/pull/fetch buttons trigger a small
notification toast, based on the output of the command that was ran. For
errors or commands with more output the user may want to see, there's an
"Open Log" button which opens a new buffer with the output of that
command.
It also uses this behavior for long error notifications for other git
commands like `commit` and `checkout`. The output of those commands can
be quite long due to arbitrary githooks running.
Release Notes:
- N/A
---------
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
Based on conversation with @maxbrunsfeld. Enabling Tag auto closing by
default so that it is discoverable for new and existing users
Release Notes:
- Made it so JSX tag auto-closing is automatically enabled in supported
languages
Closes#25483
Currently, macOS doesn't support showing multi-keystroke shortcuts in
menu items. We can use an attributed string to differentiate them, but
that breaks consistency with traditional shortcuts.
This PR removes the hack of concatenating the multi-keystroke shortcut
to the title, as it looked a bit janky.
Release Notes:
- N/A
Closes#26273
Release Notes:
- git: Fixes opening the branch selector in the commit modal with
cmd-option-b
- git: Truncates the branch selector in the commit modal
This PR makes `io.open` use our own implementation again, but instead of
the real filesystem, it will now use the project's to check file
metadata and perform read and writes using project buffers.
This also cleans up the `io.open` implementation by splitting it into
multiple methods, adds tests for various File I/O patterns, and fixes a
few bugs in read formats.
Release Notes:
- N/A
Fix KeyBinding::for_action() to use the active focus handle instead of
what was
rendered last.
This makes the UI consistently chose the cmd-escape binding for close
(because escape in the editor is editor::Cancel?),
so force it to be "escape"
Release Notes:
- git: Fixed escape tooltip in commit modal
Closes#23735
This PR fixes an issue where Zed shows a transparent title bar in
fullscreen mode on macOS instead of the default gray one.
When switching to fullscreen mode, we change the title bar appearance to
opaque. When exiting fullscreen mode, we check the existing
`appears_transparent` flag that we pass to gpui to decide whether to
change the title bar back to transparent or not.
Note: Regardless of the `appears_transparent` flag, gpui should always
show an opaque title bar in fullscreen mode to prevent a broken
appearance, as macOS always displays the title bar in fullscreen mode
upon mouse interaction.
https://github.com/user-attachments/assets/211fb185-239b-454e-ac7f-b93b25d33805
Release Notes:
- Fixed issue where Zed showed transparent titlebar in fullscreen mode
on macOS.
Closes#25086
Release Notes:
- Fixed a bug where file paths in the built in terminal of the format
`path/to/file.ext:row:col:description or error message` would not be
correctly identified as file paths due to the colon & additional text at
the end
Just some basic documentation for using debuggers in Zed development.
Goes over configuring cargo to include full debug info, attaching to an
instance of Zed, and using a debugger to debug panics and crashes
Release Notes:
- N/A
Closes #ISSUE
Release Notes:
- Git Beta: Fixed a bug that caused the project diff not to update in
response to git-related events
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
"secondary" means "cmd" on macOS and "ctrl" on not macOS.
Release Notes:
- Added a "secondary" meta key to the zed keystroke parser, which maps
to 'cmd' on macOS and 'ctrl' off of macOS
This was added to support the nix build but accidentally broke our
bundling. I'll try to re-add it in a way that works for both in the
future.
Release Notes:
- N/A
This PR decouples the scripting tool from the `Tool` trait while still
allowing it to be used as a tool from the model's perspective.
This will allow us to evolve the scripting tool as more of a first-class
citizen while still retaining the ability to have the model call it as a
regular tool.
Release Notes:
- N/A
We decided to expose scripting as tools again. We are aware of the UX
downsides of doing so, but we want to focus on getting it working well
first, and the model seems to make better use of it as an actual tool.
In the future, the tools API might support streaming. If it doesn't and
we need to ship, we can consider reverting this.
Release Notes:
- N/A
- Truncate branch names based on the width of the picker
- Use a footer for "Create branch" instead of a picker entry
Still to do:
- [x] Select the footer button when no matches and run the create logic
on `enter`
- [x] Make it possible to quickly select the footer button from the
keyboard when there are matches
Release Notes:
- Git Beta: Removed limitation that made it impossible to create a
branch from the branch picker when it too closely resembled an existing
branch name
This PR fixes some language links in the docs.
The Shell Script page wasn't being linked from `SUMMARY.md`, so no page
was being generated.
There were also some differences in the language lists in the sidebar
and on the top-level languages page.
Release Notes:
- N/A
Per a conversation with @nathansobo, have the Lua scripts run
unsandboxed for now (while this feature is behind the staff feature
flag).
Release Notes:
- N/A
Closes#20658
Now, when the "Go to Line" palette is open:
- Clicking on the editor will dismiss the palette without changing the
scroll position. (PR change)
- Pressing Enter will jump to the line number entered in the palette.
(Unchanged)
- Pressing Escape will jump back to the previous cursor location.
(Unchanged)
Release Notes:
- Fixed an issue where clicking the editor with the mouse while the "Go
to Line" palette is open would cause it to jump to the previous scroll
position.
Was dabbling on the shaders these past few days and felt like we could
have the WGSL logo. This is based on the logo found on the GPU Web
repository: https://github.com/gpuweb/gpuweb/tree/main/logo
Release Notes:
- N/A
Closes#25421
This PR adds support for external file managers to show Zed as an option
in the "Open With" context menu for directories on macOS.
<img width="350" alt="image"
src="https://github.com/user-attachments/assets/c52acd48-73c4-47be-8683-6950e0371b73"
/>
Release Notes:
- Added support for opening folders in Zed from third-party macOS file
managers like Path Finder and Super Charge through their "Open With"
menu.
The checkPhase was failing for me in darwin so I turned it off. I think
eventually we'll want to use a separate derivation for tests (which
crane has a helper for).
Crane also solved our issue with spaces in paths so I bumped the flake
to pick up that fix and removed our workaround: ipetkov/crane#808.
Release Notes:
- N/A
This PR includes lots of small fixes to get our `build.nix` and
`shell.nix` back to a working state.
I've tested this by running `cargo run` (inside the devshell) and `nix
run` on x86 nixos and arm64 darwin machines. I'd appreciate it if others
could test building inside the devshell to double-check that it's not
just working because I happen to have some system-level packages
installed, as well as seeing if it works on other platforms (non-nixos
linux, arm linux, x86 darwin).
I couldn't get the full test suite (`cargo nextest run --workspace`)
passing in the devshell on darwin, but they _are_ all passing on nixos.
nixpkgs [disables some of our
tests](92d11f06d5/pkgs/by-name/ze/zed-editor/package.nix (L226-L234))
that apparently fail or are flakey on hydra, but they don't know why.
I'm going to punt on debugging those for now, especially given that they
seem to be working for me. I'm also unsure of whether we actually want
the nix checkPhase to run the full test suite (it's currently not
passing `--workspace`) given that we have separate CI that should
enforce that those pass on all PRs.
Here's an overview of the changes made:
- Fix our `generate-licenses` script
- Relaxes the `cargo-about` version requirement slightly so it doesn't
try to install an older binary when the nixpkgs one is newer than our
requirement
- Add a workaround for [this cargo-about
issue](https://github.com/zed-industries/zed/issues/19971) obviating the
need for the patching done in the nixpkgs package
- Set the new `--frozen` flag to avoid network access/mutating the
lockfile
- Use dynamic webrtc lib from nixpkgs, and fixes up the build script in
webrtc-sys that hardcodes it to be statically linked.
- Use `inputsFrom` in `shell.nix` and avoid duplicating everything from
`build.nix`
- Add a temporary workaround for an [upstream crane
bug](https://github.com/ipetkov/crane/issues/808).
- Fix shebangs in our `script` dir to not hard-code `/bin/bash`
There are still a bunch of issues that aren't resolved here, I'll make a
tracking issue for those and try to land this first just to get back to
an unbroken state. Eventually among other things I'd like to use a
`libgit2` from `staticPkgs` and musl cross compilation to build the
remote server under nix, and then add that as a separate flake output
and include it in the shell's `inputsFrom` list.
Thanks @niklaskorz, @GaetanLepage, @bbigras and all the other nixpkgs
maintainers that have kept the `zed-editor` package working and up to
date! I seriously considered just making our flake `overrideAttrs` the
package in nixpkgs given how well maintained it is.
Thanks @WeetHet for your volunteer maintinance of this flake. I
referenced #24953 while working on these fixes, and I'd love to
collaborate on adding some of those pieces like treefmt and a github
action. If you're interested I'd really appreciate some help debugging
why crane's `buildDepsOnly` isn't working for us. I'm assuming it'd make
our `nix build` times go way down from the improved dep caching if we
could get it working.
Thanks @rrbutani for all the help on this PR 💙.
Release Notes:
- N/A
---------
Co-authored-by: Rahul Butani <rrbutani@users.noreply.github.com>
Co-authored-by: Rahul Butani <rr.butani@gmail.com>
Let's play around with it. This should not be added to tomorrow's
preview.
Release Notes:
- Git Beta: Added a panel header with an open diff and stage/unstage all
buttons.
Closes https://github.com/zed-industries/zed/issues/21277
To the left is current Zed, right is the improved version.
3rd message, from Zed, to resolve the item, does not have `textEdit` on
the right side, and has one on the left.
Seems to not influence the end result though, but at least Zed behaves
more appropriate now.
<img width="1727" alt="image"
src="https://github.com/user-attachments/assets/ca1236fd-9ce2-41ba-88fe-1f3178cdcbde"
/>
Instead of modifying the original LSP completion item, store completion
list defaults and apply them when the item is requested (except `data`
defaults, needed for resolve).
Now, the only place that can modify the completion items is this method,
and Python impl seems to be the one doing it:
ca9c3af56f/crates/languages/src/python.rs (L182-L204)
Seems ok to leave untouched for now.
Release Notes:
- Fixed LSP completion items modified before resolve request
Reverts zed-industries/zed#25135
This approach was not the best as explained in the response to the
original PR. Likely, the better approach is to create a newer specific
scope for these kinds of variables under the `@variable` prefix so that
themes can control these pseudo-keywords specifically
This PR makes refactors the scripting functionality to be a first-class
concept of the assistant instead of a generic tool, which will allow us
to build a more customized experience.
- The tool prompt has been slightly tweaked and is now included as a
system message in all conversations. I'm getting decent results, but now
that it isn't in the tools framework, it will probably require more
refining.
- The model will now include an `<eval ...>` tag at the end of the
message with the script. We parse this tag incrementally as it streams
in so that we can indicate that we are generating a script before we see
the closing `</eval>` tag. Later, this will help us interpret the script
as it arrives also.
- Threads now hold a `ScriptSession` entity which manages the state of
all scripts (from parsing to exited) in a centralized way, and will
later collect all script operations so they can be displayed in the UI.
- `script_tool` has been renamed to `assistant_scripting`
- Script source now opens in a regular read-only buffer
Note: We still need to handle persistence properly
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Closes#25509
Changes:
- If active item is already diagnostics, don't try to focus it again.
Instead of not focusing, should it just not activate instead? Something
like:
if !workspace
.active_item(cx)
.map(|item| item.item_id() == existing.item_id())
.unwrap_or(false)
{
workspace.activate_item(&existing, true, true, window, cx);
}
Release Notes:
- N/A
Closes#25594
This PR fixes an issue where signing into Copilot required restarting
Zed.
Copilot depends on an OAuth token that comes from either `hosts.json` or
`apps.json`. Initially, both files don't exist. If neither file is
found, we fallback to watching `hosts.json` for updates. However, if the
auth process creates `apps.json`, we won't receive updates from it,
causing the UI to remain outdated.
This PR fixes that by watching the parent `github-copilot` directory
instead, which will always contain one of those files along with an
additional version file.
I have tested this on macOS and Linux Wayland.
Release Notes:
- Fixed an issue where signing into Copilot required restarting Zed.
This is motivated by trying to make the Project Diff view usable with
huge Git change sets.
Release Notes:
- Improved performance of rendering multibuffers with very large numbers
of buffers
Release Notes:
- Git Beta: added `git:Add` as an alias for the existing `git::Diff`
- Git Beta: Fixed a bug where the 'generate commit message' keybinding
wasn't working.
- Git Beta: Made the empty project diff state a little more helpful with
a button to push, and a button to close the item.
Closes#26002
Release Notes:
- Added `multibuffer` key context.
- `cmd-down` and `cmd-shift-down` on Mac now moves to the end of the
last line of a singleton buffer instead of the beginning. In
multibuffers, these now move to the start of the next excerpt.
- Fixed `vim::PreviousSectionEnd` (bound to `[ ]`) to move to the
beginning of the line, matching the behavior of `vim::NextSectionEnd`.
- Added `editor::MoveToStartOfNextExcerpt` and
`editor::MoveToEndOfPreviousExcerpt`.
This gives us _very_ rudimentary support for `git switch` and `git
checkout` now, by making them aliases for our existing `git::branch`
call.
Release Notes:
- Git Beta: Added `git::Switch` and `git::CheckoutBranch` as aliases for
the existing `git::Branch`
This PR factors out a new `Thread::all_tools_finished` method to
encapsulate some of the boilerplate in the `ThreadEvent::ToolFinished`
event handler.
This should make this event handler easier to replicate for the eval
use-case.
Release Notes:
- N/A
This PR adds two new helper methods to the `Thread` for dealing with
tool use:
- `use_pending_tools` - This uses all of the tools that are pending
- The reason we aren't calling this directly in `stream_completion` is
that we still might need to have a way for users to confirm that they
want tools to be run, which would need to happen at the UI layer in the
`ActiveThread`.
- `send_tool_results_to_model` - This encapsulates inserting a new user
message that contains the tool results and sending them up to the model.
Release Notes:
- N/A
This PR decouples the `Tool` trait from the `Workspace` (and from the
UI, in general).
`Tool::run` now takes a `WeakEntity<Project>` instead of a
`WeakEntity<Workspace>` and a `Window`.
Release Notes:
- N/A
A preparation for https://github.com/zed-industries/zed/issues/4957 that
pushes all LSP-related data out from the basic completion item, so that
it's possible to create completion items without any trace of LSP
clearly.
Release Notes:
- N/A
This PR updates the `ExtensionBuilder` to require that grammar names are
written in snake_case.
The grammar names are used to construct identifiers, so we need them to
be valid C identifiers.
Release Notes:
- N/A
This PR adds pages to component preview when clicking on a given
component in the sidebar.
This will let us create richer previews & better docs for using
components in the future.
Release Notes:
- N/A
This reduces the number of multibuffer syncs from 100,000 to 20,000.
Before this change each editor individually observed the project, so
literally any project change was amplified by the number of editors you
had open.
Now editors listen to their buffers instead of the project, and other
users of `cx.observe` on the project have been updated to use specific
events to reduce churn.
Follow up to #26237
Release Notes:
- Improved performance of Zed in large repos with lots of file system
events.
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Try to re-order the tips for clarity, and make it clear that /etc/prime
could be wrong either way around.
Also remove section on FIPS now we nolonger bundle openssl
Updates #15629
Release Notes:
- N/A
We're still recreating a session for every tool call, but the idea is to
have a long-lived `Session` per assistant thread.
Release Notes:
- N/A
---------
Co-authored-by: Agus Zubiaga <hi@aguz.me>
Closes#24741
Adjusted the shortcut key handling to properly toggle filters in the project search feature.
Release Notes:
- linux: Fixed `ctrl-alt-f` not correctly toggling search filters in project search.
---------
Co-authored-by: Peter Tripp <peter@zed.dev>
## Problem
Running `cargo run .` twice in Zed repository required a rebuild two
times in a row. The second rebuild was triggered around libz-sys, which
in practice caused a rebuild of the ~entire project.
Some concrete examples:
```
cargo test -p project # Requires a rebuild (warranted)
cargo run .
cargo test -p project # Requires a rebuild (unwarranted)
```
or
```
cargo run . # Requires a rebuild (warranted)
cargo run . # Requires a rebuild (unwarranted)
```
## What's going on
Zed build script on MacOS sets MACOSX_DEPLOYMENT_TARGET to 10.15. This
is fine. However, **cargo propagates all environment variables to child
processes during `cargo run`**. This then affects Rust Analyzer spawned
by dev Zed - it clobbers build cache of whatever package it touches,
because it's behavior is not same between running it with `cargo run`
(where MACOS_DEPLOYMENT_TARGET gets propagated to child Zed) and running
it directly via `target/debug/zed` or whatever (where the env variable
is not set, so that build behaves roughly like Zed Dev.app).
## Solution
~We'll unset that env variable from user environment when we're
reasonably confident that we're running under `cargo run` by exploiting
other env variables set by cargo:
https://doc.rust-lang.org/cargo/reference/environment-variables.html
CARGO_PKG_NAME is always set to `zed` when running it via `cargo run`,
as it's the value propagated from the build.~
~The alternative I've considered is running [via a custom
runner](https://doc.rust-lang.org/cargo/reference/config.html#targetcfgrunner),
though the problem here is that we'd have to use a shell script to unset
the env variable - that could be problematic with e.g. fish. I just
didn't want to deal with that, though admittedly it would've been
cleaner in other aspects.~
Redact all above. We'll just set MACOSX_DEPLOYMENT_TARGET regardless of
whether you have it in your OG shell environment or not.
Release Notes:
- N/A
205f9a9f03/crates/editor/src/element.rs (L1643)
Due to the snippet above, Zed is supposed to have `row` larger or equal
to `start_row` here:
205f9a9f03/crates/editor/src/element.rs (L1694)
yet the panic were reported when clicking in the project diff.
That project diff has a lot of highlighting happening already, so the PR
disables inline diagnostics within a git diff view.
Release Notes:
- N/A
Access to `cx` will be needed for anything that queries entities. In
this commit this is use of `WorktreeStore::find_search_candidates`. In
the future it will be things like access to LSP / tree-sitter outlines /
etc.
Changes to support access to `cx` from functions provided to the Lua
script:
* Adds a channel of requests that require a `cx`. Work enqueued to this
channel is run on the foreground thread.
* Adds `async` and `send` features to `mlua` crate so that async rust
functions can be used from Lua.
* Changes uses of `Rc<RefCell<...>>` to `Arc<Mutex<...>>` so that the
futures are `Send`.
One benefit of reusing project search logic for search candidates is
that it properly ignores paths.
Release Notes:
- N/A
Closes#26062
Removing the width here causes zed to use the default value (inside
default settings) after restart like other panels.
Release Notes:
- Fixed issue where git panel wasn't using default width after restart
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
This PR adds a few more hunk style settings that flips the emphasis.
Normally, the concept at Zed has been that the project diff should
emphasize what's going into the commit. However, this leads to a problem
where the default state of all diff hunks are in the non-emphasized
state, making them hard to see and interact with. Especially on light
themes. This PR is an experiment in flipping the emphasis states. Now
the project diff is more like a queue of work, with the next "job" (hunk
to be evaluated) emphasized, and the "completed" (staged) hunks
deemphasized. This fixes the default state issue but is a big jump from
how we've been thinking about it. So here we can try it out and see how
it feels :)
Release Notes:
- Git Beta: Added hunk style settings to emphasize the unstaged state,
rather than the staged state.
Modified version of #25950. We still use worktree paths, but repo paths
with a status that lie outside the worktree are not excluded; instead,
we relativize them by adding `..`. This makes the list in the git panel
match what you'd get from running `git status` (with the repo's worktree
root as the working directory).
- [x] Implement + test new unrelativization logic
- [x] ~~When collecting repositories, dedup by .git abs path, so
worktrees can share a repo at the project level~~ dedup repos at the
repository selector layer, with repos coming from larger worktrees being
preferred
- [x] Open single-file worktree with diff when activating a path not in
the worktree
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/24914 (again)
Release Notes:
- Fixed an issue where multi-line pasted content was auto-indented
incorrectly if copied from the middle of an existing line.
This reduces the number of multibuffer syncs when starting the editor
with 80
files open in the Zed repo from 10,000,000 to 100,000 by avoiding
O(n**2)
dirtyness checks.
Release Notes:
- Fixed a beachball when restarting in a large repo with a large number
open files
This PR removes a number of `.unwrap`s in the Bedrock provider.
We must not `.unwrap` in situations where it is not provably safe to do
so, which it was not in any of these cases.
Release Notes:
- Fixed some potential panics in the AWS Bedrock model provider.
https://github.com/user-attachments/assets/b16e32e6-46c6-41dc-ab68-1824d288c8c2
This PR adds the first part of our planned extended notification system:
StatusToasts.
It also makes various updates to ComponentPreview and adds a `Styled`
extension in `ui::style::animation` to make it easier to animate styled
elements.
_**Note**: We will be very, very selective with what elements are
allowed to be animated in Zed. Assume PRs adding animation to elements
will all need to be manually signed off on by a designer._
## Status Toast
These are designed to be used for notifying about things that don't
require an action to be taken or don't need to be triaged. They are
designed to be ignorable, and dismiss themselves automatically after a
set time.
They can optionally include a single action.
Example: When the user enables Vim Mode, that action might let them undo
enabling it.
Status Toasts should _not_ be used when an action is required, or for
any binary choice.
If the user must provide some input, this isn't the right component!
### Out of scope
- Toasts should fade over a short time (like AnimationDuration::Fast or
Instant) when dismissed
- We should visually show when the toast will dismiss. We'll need to
pipe the `duration_remaining` from the toast layer -> ActiveToast to do
this.
- Dismiss any active toast if another notification kind is created, like
a Notification or Alert.
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <m@cole-miller.net>
This PR finishes up the support for generating commit messages using an
LLM.
We're shelling out to `git diff` to get the diff text, as it seemed more
efficient than attempting to reconstruct the diff ourselves from our
internal Git state.
https://github.com/user-attachments/assets/9bcf30a7-7a08-4f49-a753-72a5d954bddd
Release Notes:
- Git Beta: Added support for generating commit messages using a
language model.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This PR adds a new rounded/corner border token: `rounded_md` with a
value of 6px.
I feel like I was wanting to use 6px border radius a lot but avoiding
due to it being an arbitrary value... so, not anymore! It's also cool to
have this be consistent with Tailwind v4.
Follow on to the prior renames:
- `rounded_sm` -> `rounded_xs`:
https://github.com/zed-industries/zed/pull/26221
- `rounded_md` -> `rounded_sm`:
https://github.com/zed-industries/zed/pull/26228
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
There is a drawback to how we currently write our migrations:
For example:
1. Suppose we change one of our actions from a string to an array and
rename it, then roll out the preview build:
Before: `"ctrl-x": "editor::GoToPrevHunk"`
Latest: `"ctrl-x": ["editor::GoToPreviousHunk", { "center_cursor": true
}]`
To handle this, we wrote migration `A` to convert the string to an
array.
2. Now, suppose we decide to change it back to a string:
- User who hasn't migrated yet on Preview: `"ctrl-x":
"editor::GoToPrevHunk"`
- User who has migrated on Preview: `"ctrl-x":
["editor::GoToPreviousHunk", { "center_cursor": true }]`
- Latest: `"ctrl-x": "editor::GoToPreviousHunk"`
To handle this, we would need to remove migration `A` and add two more
migrations:
- **Migration B**: `"ctrl-x": "editor::GoToPrevHunk"` -> `"ctrl-x":
"editor::GoToPreviousHunk"`
- **Migration C**: `"ctrl-x": ["editor::GoToPreviousHunk", {
"center_cursor": true }]` -> `"ctrl-x": "editor::GoToPreviousHunk"`
Nice. But over time, this keeps increasing, making it impossible to
track outdated versions and handle all cases. Missing a case means users
stuck on `"ctrl-x": "editor::GoToPrevHunk"` will remain there and won't
be automatically migrated to the latest state.
---
To fix this, we introduce versioned migrations. Instead of removing
migration `A`, we simply write a new migration that takes the user to
the latest version—i.e., in this case, migration `C`.
- A user who hasn't migrated before will go through both migrations `A`
and `C` in order.
- A user who has already migrated will only go through `C`, since `A`
wouldn't change anything for them.
With incremental migrations, we only need to write migrations on top of
the latest state (big win!), as know internally they all would be on
latest state. You *must not* modify previous migrations. Always create
new ones instead.
This also serves as base for only prompting user to migrate, when
feature reaches stable. That way, preview and stable keymap and settings
are in sync.
cc: @mgsloan @ConradIrwin @probably-neb
Release Notes:
- N/A
This PR adds support for capabilities for the extension process API.
In order to use the process API, an extension must declare which
commands it wants to use, with arguments:
```toml
[[capabilities]]
kind = "process:exec"
command = "echo"
args = ["hello!"]
```
A `*` can be used to denote a single wildcard in the argument list:
```toml
[[capabilities]]
kind = "process:exec"
command = "echo"
args = ["*"]
```
And `**` can be used to denote a wildcard for the remaining arguments:
```toml
[[capabilities]]
kind = "process:exec"
command = "ls"
args = ["-a", "**"]
```
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This PR improves the setup instructions for the slash-commands-example
extension by:
1. Replacing the `sed` command with a more reliable approach that
completely replaces the Cargo.toml file.
2. Explicitly showing how to create a standalone extension with a
properly configured Cargo.toml file that:
- Uses `edition = "2021"` instead of `edition.workspace = true`
- Doesn't include `publish.workspace = true`
- Doesn't include the `[lints]` section
This change addresses an issue where the extension wouldn't work when
copied as a standalone project due to workspace references that are only
valid when the extension is built as part of the main Zed repository.
The updated instructions provide a clear, reliable path for developers
to create their own Zed extensions based on the slash commands example.
Release Notes:
- N/A
Zed fan trying to learn GPUI here. Notice one problem in input example
which cause cmd-x function not work.
Let me know if any adjustments are needed!
Release Notes:
- N/A
Closes#4271
Implemented by kicking of a task on the main thread at the end of
`Editor::handle_input` which waits for the buffer to be re-parsed before
checking if JSX tag completion possible based on the recent edits, and
if it is then it spawns a task on the background thread to generate the
edits to be auto-applied to the buffer
Release Notes:
- Added support for auto-closing of JSX tags
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Max Brunsfeld <max@zed.dev>
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Peter Tripp <peter@zed.dev>
This partially reverts https://github.com/zed-industries/zed/pull/3324
We will still blank out user/global config when running managed NPM, to
keep to the spirit of #3324 (which was made at the time we did not allow
user-provided NPM builds - the intent of the change was to make the
behavior of NPM as consistent as possible).
I tested this change by:
1. Setting up a custom NPM registry via Versaccio
2. Adding this new registry to my .npmrc
3. Mirroring `vscode-langservers-extracted` to it
4. Blocking access to `registry.npmjs.org`
5. Opening up settings.json file in Zed Nightly
- Verifying that language server update fails for it
6. Opening up Zed Dev build of this branch
- Confirming that language server update check goes through for it
Closes#19806Closes#20749Closes#9422
Release Notes:
- User and global .npmrc configuration is now respected when running
user-provided NPM binary (which also happens automatically when `npm`
from PATH is newer than 18.0.0)
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
|
[embed-resource](https://redirect.github.com/nabijaczleweli/rust-embed-resource)
| build-dependencies | patch | `3.0.1` -> `3.0.2` |
---
### Release Notes
<details>
<summary>nabijaczleweli/rust-embed-resource (embed-resource)</summary>
###
[`v3.0.2`](https://redirect.github.com/nabijaczleweli/rust-embed-resource/compare/v3.0.1...v3.0.2)
[Compare
Source](https://redirect.github.com/nabijaczleweli/rust-embed-resource/compare/v3.0.1...v3.0.2)
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xODUuNCIsInVwZGF0ZWRJblZlciI6IjM5LjE4NS40IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
|
[async-compression](https://redirect.github.com/Nullus157/async-compression)
| workspace.dependencies | patch | `0.4.18` -> `0.4.20` |
---
### Release Notes
<details>
<summary>Nullus157/async-compression (async-compression)</summary>
###
[`v0.4.20`](https://redirect.github.com/Nullus157/async-compression/blob/HEAD/CHANGELOG.md#0420---2025-02-28)
[Compare
Source](https://redirect.github.com/Nullus157/async-compression/compare/v0.4.19...v0.4.20)
##### Added
- Add support for `wasm32-wasip1-*` targets.
###
[`v0.4.19`](https://redirect.github.com/Nullus157/async-compression/blob/HEAD/CHANGELOG.md#0419---2025-02-27)
[Compare
Source](https://redirect.github.com/Nullus157/async-compression/compare/v0.4.18...v0.4.19)
##### Changed
- Update `bzip2` dependency to `0.5`.
##### Fixed
- Ensure that flush finishes before continuing.
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xODUuNCIsInVwZGF0ZWRJblZlciI6IjM5LjE4NS40IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [cargo_metadata](https://redirect.github.com/oli-obk/cargo_metadata) |
workspace.dependencies | patch | `0.19.1` -> `0.19.2` |
---
### Release Notes
<details>
<summary>oli-obk/cargo_metadata (cargo_metadata)</summary>
###
[`v0.19.2`](https://redirect.github.com/oli-obk/cargo_metadata/compare/0.19.1...0.19.2)
[Compare
Source](https://redirect.github.com/oli-obk/cargo_metadata/compare/0.19.1...0.19.2)
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [x] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xODUuNCIsInVwZGF0ZWRJblZlciI6IjM5LjE4NS40IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [linkme](https://redirect.github.com/dtolnay/linkme) |
workspace.dependencies | patch | `0.3.31` -> `0.3.32` |
---
### Release Notes
<details>
<summary>dtolnay/linkme (linkme)</summary>
###
[`v0.3.32`](https://redirect.github.com/dtolnay/linkme/releases/tag/0.3.32)
[Compare
Source](https://redirect.github.com/dtolnay/linkme/compare/0.3.31...0.3.32)
- Documentation improvements
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xODUuNCIsInVwZGF0ZWRJblZlciI6IjM5LjE4NS40IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [blake3](https://redirect.github.com/BLAKE3-team/BLAKE3) |
workspace.dependencies | patch | `1.6.0` -> `1.6.1` |
---
### Release Notes
<details>
<summary>BLAKE3-team/BLAKE3 (blake3)</summary>
###
[`v1.6.1`](https://redirect.github.com/BLAKE3-team/BLAKE3/releases/tag/1.6.1)
[Compare
Source](https://redirect.github.com/BLAKE3-team/BLAKE3/compare/1.6.0...1.6.1)
version 1.6.1
Changes since 1.6.0:
- Remove `mmap` from the default features list. It was added
accidentally in v1.6.0, last week. This is technically a
backwards-incompatible change, but I would rather not tag v2.0.0 for a
build-time bugfix with a simple workaround.
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xODUuNCIsInVwZGF0ZWRJblZlciI6IjM5LjE4NS40IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [oo7](https://redirect.github.com/bilelmoussaoui/oo7) | dependencies |
patch | `0.4.0` -> `0.4.1` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xODUuNCIsInVwZGF0ZWRJblZlciI6IjM5LjE4NS40IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [indoc](https://redirect.github.com/dtolnay/indoc) |
workspace.dependencies | patch | `2.0.5` -> `2.0.6` |
---
### Release Notes
<details>
<summary>dtolnay/indoc (indoc)</summary>
###
[`v2.0.6`](https://redirect.github.com/dtolnay/indoc/releases/tag/2.0.6)
[Compare
Source](https://redirect.github.com/dtolnay/indoc/compare/2.0.5...2.0.6)
- Documentation improvements
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xODUuNCIsInVwZGF0ZWRJblZlciI6IjM5LjE4NS40IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [inventory](https://redirect.github.com/dtolnay/inventory) |
workspace.dependencies | patch | `0.3.19` -> `0.3.20` |
---
### Release Notes
<details>
<summary>dtolnay/inventory (inventory)</summary>
###
[`v0.3.20`](https://redirect.github.com/dtolnay/inventory/releases/tag/0.3.20)
[Compare
Source](https://redirect.github.com/dtolnay/inventory/compare/0.3.19...0.3.20)
- Documentation improvements
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xODUuNCIsInVwZGF0ZWRJblZlciI6IjM5LjE4NS40IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
|
[globset](https://redirect.github.com/BurntSushi/ripgrep/tree/master/crates/globset)
([source](https://redirect.github.com/BurntSushi/ripgrep/tree/HEAD/crates/globset))
| workspace.dependencies | patch | `0.4.15` -> `0.4.16` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xODUuNCIsInVwZGF0ZWRJblZlciI6IjM5LjE4NS40IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [bytes](https://redirect.github.com/tokio-rs/bytes) |
workspace.dependencies | patch | `1.10.0` -> `1.10.1` |
---
### Release Notes
<details>
<summary>tokio-rs/bytes (bytes)</summary>
###
[`v1.10.1`](https://redirect.github.com/tokio-rs/bytes/blob/HEAD/CHANGELOG.md#1101-March-5th-2025)
[Compare
Source](https://redirect.github.com/tokio-rs/bytes/compare/v1.10.0...v1.10.1)
##### Fixed
- Fix memory leak when using `to_vec` with `Bytes::from_owner`
([#​773](https://redirect.github.com/tokio-rs/bytes/issues/773))
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xODUuNCIsInVwZGF0ZWRJblZlciI6IjM5LjE4NS40IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
The function ensure_final_newline in buffer.rs has this explanation:
Ensures that the buffer ends with a single newline character, no other
whitespace.
The documentation wasn't explaining well that we actually remove any
lines containing only whitespace and keep only 1 line at the end of a
buffer.
Release Notes:
- N/A
---------
Co-authored-by: Peter Tripp <peter@zed.dev>
Co-authored-by: Danilo Leal <danilo@zed.dev>
Split Windows GHA CI job into `windows_clippy` and `windows_tests`
(`cargo test` and `cargo build`). `windows_clippy` will continue to run
on every PR commit, but `windows_tests` will only be run on main. Tag a
PR `windows` if you would like to run windows tests.
Added a call to the Azure metadata service to detect the Azure hardware
used by the GitHub hosted Windows runners. This is temporary and I'll
remove once I've gathered some data (adds 5-15secs to Windows CI times)
Release Notes:
- N/A
---------
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
Closes https://github.com/zed-industries/zed/discussions/25665
> Currently Zed is missing quite an useful Vim motion: <count>% (go to
{count} percentage in the file).
Description:
{count}% - Go to {count} percentage in the file, on the first non-blank
in the line linewise. To compute the new line number this formula is
used: ({count} * number-of-lines + 99) / 100 .
> [Link](https://neovim.io/doc/user/motion.html#N%25).
Release Notes:
- vim: Added `<count>%` motion
---------
Co-authored-by: Conrad Irwin <conrad@zed.dev>
Release Notes:
- Git Beta: Fixed a bug where discarding a hunk in the project diff view
performed two concurrent saves of the buffer.
- Git Beta: Fixed an issue where diff hunks appeared in the wrong state
after failing to write to the git index.
Closes https://github.com/zed-industries/zed/issues/25701
Reworks the way cmd-click is handled:
* first, all worktree entries are checked for existence
This allows more fine-grained lookup of entries that are in the
worktree, but their path in the terminal is not "full": in case neither
`cwd` no worktree's root + that temrinal paths form a valid path
(https://github.com/zed-industries/zed/issues/25701)
The worktrees are sorted by "the most close to cwd first" so such files
are attempted to resolved in the most specific worktree.
This also fixes no cmd-click working in the remote ssh.
* second, only if the client is local, do the FS checks to find
non-indexed files
Release Notes:
- Improved cmd-click in terminal to find more paths
Closes#25976
There's a couple states that this covers:
- upon `git init`, no footer is shown at all
- after 1 commit (or when on any parentless commit), the uncommit button
is ~disabled~ hidden
- otherwise commit button is shown
Also updated the button with "meta" tooltip showing human readable
description and git command.
Release Notes:
- N/A
---------
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
Attempt to fix an issue where conflicts from a cherry-pick don't get
cleared out of the git panel after being resolved.
Release Notes:
- Git Beta: Fixed resolution of conflicts from cherry-picks not being
reflected in the git panel
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [anyhow](https://redirect.github.com/dtolnay/anyhow) |
workspace.dependencies | patch | `1.0.96` -> `1.0.97` |
---
### Release Notes
<details>
<summary>dtolnay/anyhow (anyhow)</summary>
###
[`v1.0.97`](https://redirect.github.com/dtolnay/anyhow/releases/tag/1.0.97)
[Compare
Source](https://redirect.github.com/dtolnay/anyhow/compare/1.0.96...1.0.97)
- Documentation improvements
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xODUuNCIsInVwZGF0ZWRJblZlciI6IjM5LjE4NS40IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [async-trait](https://redirect.github.com/dtolnay/async-trait) |
workspace.dependencies | patch | `0.1.86` -> `0.1.87` |
---
### Release Notes
<details>
<summary>dtolnay/async-trait (async-trait)</summary>
###
[`v0.1.87`](https://redirect.github.com/dtolnay/async-trait/releases/tag/0.1.87)
[Compare
Source](https://redirect.github.com/dtolnay/async-trait/compare/0.1.86...0.1.87)
- Documentation improvements
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xODUuNCIsInVwZGF0ZWRJblZlciI6IjM5LjE4NS40IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Release Notes:
- Git Beta: Fixed a bug where the branch selector would only show for
the first repository opened.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Richard Feldman <oss@rtfeldman.com>
The close button on each tab previously only worked when you right
clicked it, presumably because on macos people were using `ctrl+tab` to
open the picker, and clicking with `ctrl` held registers as a right
click. Now it should work with either mouse button.
Release Notes:
- N/A
Co-authored-by: Conrad <conrad@zed.dev>
This PR adds two new tools to Assistant 2:
- `list-worktrees` - Lists the worktrees in a project
- `read-file` - Reads a file at the given path in the project
I don't see `list-worktrees` sticking around long-term, as when we have
tools for listing files those will include the worktree IDs along with
the path, but making this tool available allows the model to utilize
`read-file` when it otherwise wouldn't be able to.
Release Notes:
- N/A
This PR changes the default value when no input is provided with a tool
use from `null` to `{}`.
This fixes an issue I was seeing where tools that didn't accept input
were not being called correctly.
Release Notes:
- N/A
This PR fixes the language model selector.
I tried to piece together the state prior to #25697 (the state it was in
at 11838cf89e) while retaining unrelated
changes that happened since then.
Release Notes:
- Fixed an issue where language models would not be authenticated until
after the model selector was opened (Preview only).
This fixes a performance problem introduced in #25906 and caused by
calling `BufferDiff::snapshot` too frequently.
Release Notes:
- Fixed a performance regression related to buffer diffs
Co-authored-by: Conrad <conrad@zed.dev>
We would previously return an error if there was at least one non-UTF8
file. Now we just ignore them and only add text files. If no text files
are found we show an error.
Release Notes:
- N/A
https://github.com/zed-industries/zed/pull/25663#issuecomment-2686095807
Renamed the `vim::Backspace` and `vim::Space` actions to
`vim::WrappingLeft` and `vim::WrappingRight` respectively. The old names
are still available, but they are marked as deprecated and users are
advised to use the new names.
Also added a paragraph to the docs describing how to enable wrapping
cursor navigation.
These changes tackle two issues with running terminal commands via vim
mode:
- When using `!!` the tab's title was set to `!!` instead of the
previous command that was run and these changes fix that in order to
always display the previous command in the tab's title when re-running
the command with `!!`
- For a terminal command, pressing the rerun button would actually bring
up the task palette, so this has been updated in order to disable the
rerun button when the terminal tab was spawned via a vim command
Closes#25800
Release Notes:
- Fixed the terminal tab title when using `!!` to rerun the last command
- Improved the terminal tab for when command is run via vim mode, in
order to disable the rerun button, seeing as Zed does not support it
Closes#25647
This PR fixes two issues related to cmd + click on URL:
1. Normally cmd + click on URL, it opens browser. Now, alt + tab back to
Zed. If you cmd + click on link again it won't work, until you normal
click some where else in buffer. It won't even show underline.
2. Again, cmd + click on URL, it opens browser. Now, alt + tab back to
Zed. If you cmd + click, some where else in buffer like just normal
text, and now try to hover on URL it won't show up underline and cmd +
click on it won't work. Unless again, if you plain click somewhere else.
Problem:
Issue is when clicking we set pending anchor (for selection), and when
we mouse up we clear those. This works for normal case without pressing
any modifier.
But, in case of cmd modifier, we set pending anchor (set when
`SelectPhase::Begin`), but we don't clear it once we use that data.
Fix:
Once we end up using selection, anchor, etc data to figure out where to
navigate either URL/defination etc, we clear selection just like how we
do it in normal click. This doesn't require to happen after navigate
task, so we do it right after our usage of it.
Before:
https://github.com/user-attachments/assets/b33d93fc-f490-4fa4-ae22-1da1fd6b77a9
After:
https://github.com/user-attachments/assets/028f039a-cd13-4651-b461-3ba52f2526de
Release Notes:
- Fixed an issue where cmd + click on a URL was not working sometimes.
Closes#21974
`resolve_path_in_worktrees` function looks for provided path in each
worktree until valid file is found.
In this PR we priortize current buffer worktree before other worktrees,
because of edge case where, file with same name might exists in other
worktrees.
Updated tests to handle this case.
Release Notes:
- Fixed an issue where the wrong file from a different worktree would
open when using `Cmd + Click` on a file import.
Closes#18157
Release Notes:
- vim: Added `:reg[isters]` to show the current values of registers
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes#22536
Changes:
- Visual and visual block: Cursor at start of selection.
- Visual line: Cursor at start on line.
- Uses different handling since the selection does not actually change
in vline.
Release Notes:
- vim: Fixed insert before (`shift-i`) in visual modes.
old nixpkgs versions didn't have rust 1.85 and nix develop failed (1.85
is specified in rust-toolchain.toml).
ran `nix flake update` to bump the flake dependencies. it now works
Release Notes:
- N/A
Also simplify it to avoid doing a bunch of unnecessary work.
Co-Authored-By: Cole <cole@zed.dev>
Closes #ISSUE
Release Notes:
- git: Fix jumping to the previous diff hunk
---------
Co-authored-by: Cole <cole@zed.dev>
Closes#10400
Closes https://github.com/zed-industries/zed/issues/17947
Changes:
- Let vim::increment find boolean values in the line and toggle them.
Release Notes:
- vim: Added support for toggling boolean values with `ctrl-a`/`ctrl-x`
Fixes two issues with the Vim exchange implementation:
1. The clear exchange implementation **didn't** clear the exchange. This
was due to us asking the editor to clear normal highlights instead of
background highlights.
2. Calling clear exchange also wouldn't cause the operator to be
cleared, so you would be left in operator = "cx".
I've added tests for both of these cases.
Partially closes#25750. It doesn't address the problem with dot repeat
not working for my custom bindings, but I don't know what would cause
that. I'd love to hear some thoughts on why that is. That might be a
problem on my part or it might be something with the code. Input would
be appreciated.
Release Notes:
- Fixed: Vim exchange's "clear exchange" function didn't clear the
exchange and kept you in operator pending mode.
This solves a couple of issues with Vim search by making the search
buffer and `SearchableItem` aware of the direction of the search. If
`SearchOptions::BACKWARDS` is set, all operations will be reversed. By
making `SearchableItem` aware of the direction, the correct active match
can be selected when searching backward.
Fixes#22506. This PR does not fix the last problem in that issue, but
that one is also tracked in #8049.
Release Notes:
- Fixes incorrect behavior of backward search in Vim mode
This fixes a major performance issue in the current git beta.
This PR also removes the PopoverButton component, which was easy to
misuse.
Release Notes:
- Git Beta: Fix frame drops caused by opening the git panel
---------
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
We were iterating over the row range of a hunk, and inserting into a
hash map for every row.
Release Notes:
- Fixed a performance problem when a large diff hunk was displayed in an
editor.
Fine-tuning the visuals (namely, reducing font and keybinding size) and
passing `on_click` handlers to the Cancel & Regenerate actions.
Release Notes:
- N/A
Just a basic implementation so we can start trying it out.
Release Notes:
- N/A
---------
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Michael <michael@zed.dev>
This PR makes it so the copy button on Markdown code blocks stays
absolutely positioned even when scrolled:
<img width="1297" alt="Screenshot 2025-03-04 at 5 28 48 PM"
src="https://github.com/user-attachments/assets/b0d0fae9-ccd6-43c1-bef3-44d8d3c3e669"
/>
We achieve this by inserting a new parent element around both the copy
button and the code block itself so we can position the copy button
absolutely within that element.
Release Notes:
- N/A
Release Notes:
- Git Beta: Synchronized selections between the modal editor and the
panel editor
- Git Beta: Allow opening the commit modal even if we're unable to
commit.
Proper version of https://github.com/zed-industries/zed/pull/25425
When https://github.com/zed-industries/zed/pull/24857 returned font
updates on settings changes, settings values, not in-memory ones should
be compared.
This PR returns back the logic finally, and changes it to explicitly
track the settings values, not the in-memory ones.
Also adds the same tracking for UI font changes, which had never been
tracked before.
Release Notes:
- Fixed font sizes not reacting on settings change
- Add global handlers so these actions can be invoked from the command
palette, etc.
- Tweak spinner to not show itself until a remote has been selected
Release Notes:
- N/A
Check that there are no `visible_worktrees` rather than checking
`worktrees` when deciding whether to display the "Open a file or project
to get started" text
Closes#25395
Release Notes:
- Fixed the "Open a file or project to get started" message not always
showing after all buffers have been closed
This PR adds the `git.hunk_style` setting, allowing setting an alternate
style for hunks – specifically the rendering of unstaged hunks.
It has 2 options:
- `transparent` (unstaged hunks are more transparent/less opaque than
staged hunks)
- `pattern (unstaged hunks are indicated by a visual pattern)
We'll possibly explore a VSCode-style "don't show staged hunks", but the
complexity it adds is a bit out of scope for now.
Transparent:
Pattern:
Release Notes:
- Git Beta: Added `git.hunk_style` setting to allow toggling between git
hunk visual styles.
Closes#22999
# Problem
Currently, the default soft wrap mode of an editor is determined by
reading the language-specific settings of the language _at offset zero_
in the editor's (multi)buffer. While this provides a way to pick a
single soft wrap mode for a multi-language multibuffer, it's a bad
choice for a single-buffer multibuffer that begins with a different
embedded language. For example, Markdown with frontmatter:
```markdown
---
my_front_matter
---
# Hello World
```
Setting this in config:
```json
"languages": {
"Markdown": { "soft_wrap": "bounded" }
},
```
Will not soft wrap the Markdown file as the language at offset zero is
YAML.
# Solution
Instead of using the language at offset zero, use the language of the
first buffer in the multibuffer (the buffer at offset zero). This gives
better behavior for single-buffer editors, and a similar default for
multi-language multibuffers as before.
# Testing
All existing `editor` crate tests pass, but I would appreciate any
guidance for where best to add additional testing.
Release Notes:
- Fixed soft_wrap setting not applying to buffers starting with a
different language
---------
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
If the user already binds `tab`/`alt-tab`/`alt-l` to a different action
in a conflicting context and hasn't assigned a different keybinding for
`editor::AcceptEditPrediction`, we would show broken popovers with no
bindings:
Instead, they will now see an error-variant of every popover which
includes a tooltip with a short description and buttons to open the
keymap, and open a new docs section explaining the issue in detail and
how to fix it.
Note: I included the docs change in this PR because it's ok to deploy
before the release, as it also applies to existing versions.
Release Notes:
- edit predictions: Improve UX when there's no keybinding for accepting
predictions
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Co-authored-by: Danilo <danilo@zed.dev>
Also
- Recomputes `suggested_commit_message` and no longer stores it, to
ensure things are always up to date
- Reduces indentation in `render_footer`
Release Notes:
- N/A
We modified few actions in
https://github.com/zed-industries/zed/pull/25846, which are:
`"editor::GoToHunk" -> ["editor::GoToHunk", { "center_cursor": true }]`
`"editor::GoToPrevHunk" -> ["editor::GoToPrevHunk", { "center_cursor":
true }]`
Also, recently we changed and added migration for:
`["editor::GoToPrevHunk", { "center_cursor": true }] ->
["editor::GoToPreviousHunk", { "center_cursor": true }] `
This means:
1. User that might still have `editor::GoToHunk` won't be automatically
migrated to `["editor::GoToHunk", { "center_cursor": true }]`. Note
value of `center_cursor` is false, in first case (default), and true in
second case.
2. User that might still have `editor::GoToPrevHunk` won't be
automatically migrated to `["editor::GoToPreviousHunk", {
"center_cursor": true }]`. Note, `editor::GoToPrevHunk` is renamed
since, it is now invalid action.
This PR adds those migrations.
cc: @marcospb19
Release Notes:
- N/A
Closes#22447
When navigate forward/back, the focus moves from the ProjectSearchView's
result editor to the Pane, and then move to the ProjectSearchView, but
the event `on_focus_in` not triggered for ProjectSearchView, causing the
result editor to lose focus eventually.
f6dabadaf7/crates/workspace/src/workspace.rs (L1372)f6dabadaf7/crates/workspace/src/workspace.rs (L1385)
Considering that the navigation might be triggered again in the next
frame, so use `on_next_frame` in `on_focus` event to move focus to
result editor.
Next frame:
- the blur event triggered for result editor.
- focus move from ProjectSearchView to result editor in `on_focus` event
for ProjectSearchView
- navigate again, focus moves from result editor to Pane then move back
to ProjectSearchView
- the focus not change during this frame, so no focus event happened for
ProjectSearchView.
Release Notes:
- Fix lost focus when navigate back in project search result
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Fixes#16057
In newer versions of clangd, the switch labelDetailsSupport in the json
passed to the language server modifies the format of the returned json.
Zed handles well the old format, but misses the function parameters in
the new one. For example:
The old format looks like this:
```json
...
"label": " Window(int width, int height, const char *name, bool vsync, bool resizable)",
...
```
and with labelDetailsSupport = true:
```json
...
"label": " Window",
"labelDetails": {
"detail": "(int width, int height, const char *name, bool vsync, bool resizable)"
},
...
```
A simple solution is to just to not tell the language server that label
details are supported and force it to use the old format. This is a
dirty fix, but makes the completions behave like in the old versions of
clangd.
I do not know if this will break another language server. From what I've
found out most lsp-s do not depend on that setting and provide all
completion data either way. If not, this switch will need to be exposed
in a config or be at least lsp-dependant.
Lastly, I do not know Rust, maybe will need help to make a better fix
for the issue.
Release Notes:
- Fixed broken C++ completion suggestions
Closes#25885
This PR improves the matching for file icons to tabs.
Previously, the tab icon would be resolved based upon the relative path
in the current project. However, this caused the default file icon being
assigned to all files outside of the project, as the relative path for
these files would be empty.
Instead, `path_for_buffer` is now used which always returns a proper
file name even for paths outside the current project (as also stated [in
this
comment](fee9c67707/crates/editor/src/items.rs (L1689))).
As the file name is sufficient for matching icons to files, this fixes
the linked issue whilst not changing anything for previously properly
matched icons.
| `main` | This PR |
| --- | --- |
| <img width="296" alt="main"
src="https://github.com/user-attachments/assets/e72b8b5d-aa1c-4a8e-903f-14239f5b8764"
/> | <img width="296" alt="PR"
src="https://github.com/user-attachments/assets/a736974a-ce41-4861-be3f-95448cc7ffd0"
/> |
Release Notes:
- Fixed wrong file icons being shown for files outside of the current
project.
This does not fix the bug where, when the commit editor modal is open,
changing the staged file does not update the suggested message in the
commit editor. Conrad mentioned he thought we shouldn't be allowed to
change those when the modal is open, so I'm not attempting to fix that.
Release Notes:
- Made suggested commits placeholders and allow them to be committed.
Closes#25045
With the setting `"use_system_path_prompts": false`, previously, if the
completion target was a directory, no separator would be added after it,
requiring us to manually append a `/` or `\`. Now, if the completion
target is a directory, a `/` or `\` will be automatically added. On
Windows, both `/` and `\` are considered valid path separators.
https://github.com/user-attachments/assets/0594ce27-9693-4a49-ae0e-3ed29f62526a
Release Notes:
- N/A
Also:
- Internally renames a bit of code to make it easy to identify between
when we are disabling the buttons that open and close the modal editor
(in Git Panel and Project Diff) vs when we are disabling the commit
buttons (in Git Panel and Git commit editor modal).
- Deletes some unused code.
Release Notes:
- Unified disabling / enabling the button to open the Git commit editor
modal in the Git panel with the Project Diff commit button.
- Unified disabling / enabling the commit buttons, for the same cases,
between the Git panel and Git commit editor modal.
Closes#25951
Release Notes:
- git: Update "enter" in the list of changed files to preserve focus. If
you want the old behaviour, hit enter twice.
- git: Follow the cursor, not the scroll anchor, in the list. Although
the scroll anchor was nice for passive scrolling, it broke if you had
changed the overflow scroll settings.
Currently, when an element has only a hover listener, the attached
listener will never trigger, because within the check for whether a
hitbox has to be inserted for the given element, this case it not
considered.
That leads to the behaviour as described in
https://github.com/zed-industries/zed/pull/25602#discussion_r1970720972,
where another event listener has to be attached to the element in order
for the hover listener to work.
This PR fixes the issue by ensuring that a hitbox is also inserted when
only a hover listener is attached to the element.
Release Notes:
- N/A
This PR changes the git panel to use worktree-relative paths for its
entries, instead of repository-relative paths as before. Paths that lie
outside the active repository's worktree are no longer shown in the
panel. Note that in both respects this is how the project diff editor
already works, so this PR brings those two pieces of UI into harmony.
Release Notes:
- N/A
In #25005 we added regex syntax highlighting to search; but the existing
regex grammar highlighted every character as a string which was hard to
read.
This flips so that characters are not highlighted, and brackets, etc.
are.
<img width="346" alt="Screenshot 2025-03-03 at 14 39 35"
src="https://github.com/user-attachments/assets/f7d3ae9c-fb5c-45eb-a5e9-41a330fbe940"
/>
Release Notes:
- Fixed regex search box being overly green
This PR adds the ability for Markdown code blocks and tables to be made
horizontally scrollable.
This is a feature that the caller can opt in to.
Right now we're using it for the rendered Markdown in the Assistant 2
panel.
Release Notes:
- N/A
This PR adds a new `restrict_scroll_to_axis` style to allow consumers to
opt-in to the scrolling behavior found on the web.
When this is enabled the behavior will be such that:
- Scrolling using the mouse wheel will only scroll the Y axis
- Scrolling using the mouse wheel with <kbd>Shift</kbd> held will only
scroll the X axis
This behavior is useful in scenarios where you have some
vertically-scrollable content that is interspersed with
horizontally-scrollable elements, as otherwise the scroll will be
constantly hijacked by the horizontally-scrollable elements while trying
to scroll up and down in the vertically-scrollable container.
I think that this behavior should be the default, but it's a bit of a
sweeping change to make all at once, so for now it remains opt-in.
Release Notes:
- N/A
This PR adds initial support for displaying tables to the `markdown`
crate.
This allows us to render tables in Assistant 2:
| Before | After |
|
----------------------------------------------------------------------------------------------------------------------------------------------------
|
----------------------------------------------------------------------------------------------------------------------------------------------------
|
| <img width="1309" alt="Screenshot 2025-03-03 at 1 39 39 PM"
src="https://github.com/user-attachments/assets/ad7ada01-f35d-4fcf-a20c-deb42b55b34e"
/> | <img width="1297" alt="Screenshot 2025-03-03 at 3 38 21 PM"
src="https://github.com/user-attachments/assets/9b771126-30a0-479b-8c29-f5f572936f56"
/> |
There are a few known issues that should be addressed as follow-ups:
- The horizontal scrolling within a table is linked with the scrolling
of the parent container (e.g., the Assistant 2 thread)
- Cells are currently cut off entirely when they are too wide, would be
nice to truncate them with an ellipsis
Release Notes:
- N/A
When a worktree is created, we walk up the ancestors of the root path
trying to find a git repository. In particular, if your `$HOME` is a git
repository and you open some subdirectory of `$HOME` that's *not* a git
repository, we end up scanning `$HOME` and everything under it looking
for changed and untracked files, which is often pretty slow. Consistency
here is not very useful and leads to a bad experience.
This PR adds a special case to not consider `$HOME` as a containing git
repository, unless you ask for it by doing the equivalent of `zed ~`.
Release Notes:
- Changed the behavior of git features to not treat `$HOME` as a git
repository unless opened directly
We've had some issues reported with git repositories not getting
detected when they're a strict parent of the worktree root. Add a bit
more logging to understand what's going on here.
Release Notes:
- N/A
This PR changes how we persist threads in Assistant2 to use `serde_json`
instead of `bincode` for the representation.
This makes the format more flexible to work with (and will allow for
using things like `#[serde(default)]`) if the schema changes over time.
Note: We have to bump the LMDB database version for this, so any threads
created before now will be gone.
Release Notes:
- N/A
This fixes:
- Bug: Using "up" in model selector triggers assistant2::FocusUp not
menu::SelectPrev
- Bug: Pressing arrow up/down in the model selector opened in the inline
assistant doesn't work
- Bug: Dismissing the model selector with Esc is not working
- Bug: Dismissing context pickers with Esc no longer working
Release Notes:
- N/A
This PR updates the extension CLI to make the use of
`scrollbar_thumb.background` in a theme a hard error.
We're working to eradicate usage of this theme property, so this will
prevent new extensions from being published that use it.
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/25865
Closes https://github.com/zed-industries/zed/pull/25915
In the issue, Zed had caused `.git/lfs/tmp/466102258`-like files to
appear in the directory, which lead to background FS event listener to
handle this as an update, incrementing snapshot's `scan_id`, which lead
to git status rescan, which caused another increment to `status_scan_id`
— incrementing either of the IDs causes the related repo data to be
considered "changed:
41b45eaba7/crates/worktree/src/worktree.rs (L1590-L1605)
hence propagating events to the other parts of the system (e.g. git
blame, which was also active in the issue's case)
```
[2025-03-01T20:01:08+01:00 DEBUG worktree] ignoring event ".git/lfs/tmp/466102258" within unloaded directory
[2025-03-01T20:01:08+01:00 DEBUG worktree] received fs events []
[2025-03-01T20:01:08+01:00 DEBUG worktree] reloading repositories: ["/Users/alex/dev/monorepo/.git"]
[2025-03-01T20:01:08+01:00 DEBUG editor::git::blame] Status of git repositories updated. Regenerating blame data...
[2025-03-01T20:01:08+01:00 DEBUG editor::git::blame] Status of git repositories updated. Regenerating blame data...
[2025-03-01T20:01:08+01:00 DEBUG editor::git::blame] Status of git repositories updated. Regenerating blame data...
```
Due to repo update events sent, another `.git/lfs/tmp/` entry is
created, things start over...
The PR fixes this by ignoring any `.git/lfs/` directory-related FS
events, as needed for the current git status update heuristics.
https://github.com/zed-industries/zed/pull/25915 tried to follow further
and `scan_id` and `status_scan_id` but we do not store all git state in
memory, e.g. head
e0060b92cc/crates/editor/src/editor_tests.rs (L13686)
as
[tests](https://github.com/zed-industries/zed/actions/runs/13631960559/job/38101504549?pr=25915)
show.
Release Notes:
- Improved `.git` scan heuristics
Mostly just fine-tuning its positioning. Other changes are mainly using
the Label's `buffer_font` method instead of using a div for that.
Release Notes:
- N/A
Reverting https://github.com/zed-industries/zed/pull/25440
This is a good change, but given the PR was open for a while, I guess it
didn't catch conflicts with main, and so it broke it. Will revert it for
now, to keep main fresh, but will look into adding this behavior back
again.
Release Notes:
- N/A
Closes#10167
This is take 2 on https://github.com/zed-industries/zed/pull/2341 which
was closed due to lack of migrator.
This PR contains rename of following keymap actions:
```sh
1. ["editor::GoToPrevHunk", { "center_cursor": true }] -> ["editor::GoToPreviousHunk", { "center_cursor": true }]
2. "editor::GoToPrevDiagnostic" -> "editor::GoToPreviousDiagnostic"
3. "editor::ContextMenuPrev" -> "editor::ContextMenuPrevious"
4. "search::SelectPrevMatch" -> "search::SelectPreviousMatch"
5. "file_finder::SelectPrev" -> "file_finder::SelectPrevious"
6. "menu::SelectPrev" -> "menu::SelectPrevious"
7. "editor::TabPrev" -> "editor::Backtab"
```
Release Notes:
- Renamed several keymap actions for consistency (e.g., `GoToPrevHunk` →
`GoToPreviousHunk`, `TabPrev` → `Backtab`). Your existing configured
keybindings will still work. You can click **"Backup and Update"** at
the top of your keymap file to easily update to the new actions.
Co-authored-by: Joseph T. Lyons <JosephTLyons@gmail.com>
When a context menu item has a documentation aside element attached to
it, we're now hiding the keybinding (which wouldn't trigger anything
anyway) to make room for displaying an info icon, with the purpose of
indicating the existence of the docs aside, which will typically explain
the reason why the item’s disabled in the first place.
Also, changed the label color to use the `Disabled` token; more
appropriate for this, and just slightly darker, which is great!
<img
src="https://github.com/user-attachments/assets/a7f9f022-16d1-41d5-b1b5-3cbcc9630cc8"
width="500px"/>
Release Notes:
- N/A
This PR adds toasts for reporting success and errors from remote git
operations. This PR also adds a focus handle to notifications, in
anticipation of making them keyboard accessible.
Release Notes:
- N/A
---------
Co-authored-by: julia <julia@zed.dev>
Closes#23744
Release Notes:
- Changed the `always_show_close_button` key to `show_close_button` and
introduced a new `hidden` value, that allows never displaying the close
button.
---------
Co-authored-by: Peter Tripp <peter@zed.dev>
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Co-authored-by: smit <0xtimsb@gmail.com>
### Problem
When using HTTPS remotes, users are getting errors when trying to push
or pull via the git panel.
On macOS, Zed bundles a `git` binary that's part of
[`dugite-native`](https://github.com/desktop/dugite-native). But we
don't include the entire package. Additional binaries from
`dugite-native` are needed for pulling and pushing over HTTPS.
### Solution
Rather than bundling those additional binaries, I've changed the `push`,
`pull`, and `fetch` actions to rely on the *system-installed* `git`
binary. The downside of this is that, if the user does not have Git
installed, they wont' be able to push, pull, or fetch from within Zed.
But we believe that the vast majority of users will have Git installed.
Also, unlike `diff` and `status`, which Zed needs to call in the
background without any user interaction, `push`/`pull` and `fetch` are
explicit actions that the user takes in Zed, so there is an opportunity
to prompt them to install Git if they haven't.
### Background
There are three ways (that I know of) that users might authenticate when
pushing, pulling, or fetching over HTTPS.
1. Via a built-in [Git
`credential.helper`](https://git-scm.com/docs/gitcredentials). On macOS,
Git ships with a helper called `credential-osxkeychain` that stores
internet passwords in the OS Keychain. You can opt into this globally
with the command `git config --global credential.helper osxkeychain`,
which writes to your `~/.gitconfig`.
2. Via [`Git Credential Manager`
(GCM)](https://github.com/git-ecosystem/git-credential-manager), which
is a different `credential.helper`, [built by
GitHub](https://github.blog/security/application-security/git-credential-manager-authentication-for-everyone/),
which must be installed manually, and integrates with specific Git
hosting providers like GitHub and Azure.
3. By typing their Username and Password/Access-token interactively when
pushing/pulling/fetching.
### Testing Status
* [ ] 🚫 Interactive password auth - not yet supported, requires
https://github.com/zed-industries/zed/pull/25848
* [x] **credential-osxkeychain** - when using the built-in credential
helper, and the credentials are already stored in the keychain,
push/pull/fetch now work fine .
* [ ] **GCM** - still testing.
* Right now, I'm seeing `git-credential-manager` just hang indefinitely
when pushing from Zed, even though it works when pushing from a
terminal.
Release Notes:
- N/A
Closes#25810
Reorders default macOS keymap so that `cmd-w` in `"context":
"PromptLibrary"` bindings is not the last binding for
`workspace::CloseWindow` and therefore does not get rendered in the app
menu or intercepted by MacOS
Release Notes:
- N/A
Closes#19267
Adds highlight field specifically for `constructor` in JS/TS/TSX so that
it can be highlighted as a different color than regular methods
Release Notes:
- N/A
---------
Co-authored-by: Ben Kunkle <ben@zed.dev>
"Copy Relative Path" action had a check for existence of relative path
but it always passed because
[`WorktreeStore::find_worktree()`](1d5499bee7/crates/project/src/worktree_store.rs (L148))
function returned empty path for these kinds of files. It feels correct
to make changes there, but I don't know what else could be impacted.
"Reveal In Project Panel" had no check whatsoever and so I made one.
Release Notes:
- N/A
Hi Zed team! 👋
As a fan of Zed Editor who's excited to contribute, I noticed a small
optimization opportunity in the JSON merging utilities.
<b>Changes:</b>
Removed redundant key.clone() calls in insert() operations within 2
functions:
1. merge_json_value_into
2. merge_non_null_json_value_into
<b>Why:</b>
Since we're already moving ownership of `source_object` 's contents and
key is no longer used further, we could directly pass `key` to `insert`
without cloning.
Eliminates redundant allocations, improving performance slightly for
JSON-heavy operations.
<b>Testing:</b>
I have tested this locally and all existing tests passed. The change
preserves behavior while removing redundancy.
Love using Zed and happy to contribute! Let me know if any adjustments
are needed!
Release Notes:
- N/A
This PR adds support for clickable file paths in the Odin language format.
The odin compiler errors use the format `/path/to/file.odin(1:1)`. We
didn't recognize this format, making these paths non-clickable in the
terminal.
Also added tests for this.
Release Notes:
- Added support for clickable file paths in the Odin language format.
---------
Co-authored-by: Peter Tripp <peter@zed.dev>
Follow-up of https://github.com/zed-industries/zed/pull/25766
Fixes the bugs found:
* modifier toggle not happening instantly due to `edit_debounce_ms`
considered
* hint update race that ignored the cache clear
Release Notes:
- N/A
When reviewing hunks, scroll to put them at the center of the screen
so you can better see the context around that hunk.
The field `center_cursor` was added to the actions `editor::GoToHunk`
and `editor::GoToPrevHunk`, this was set to `false` by default in
keymaps, as it wouldn't help with in-editor navigation.
The field is set to `true` for when you trigger `git::StageAndNext`
and `git::UnstageAndNext`, this is also `true` for the buttons in the
Diff View toolbar.
Release Notes:
- N/A
This PR adds the `whole_excerpt` field to the actions:
- `git::StageAndNext`
- `git::UnstageAndNext`
Which is set by false by default, effectively, now staging and unstaging
with these actions is done hunk-by-hunk, this also affects the `Stage`
and
`Unstage` buttons in the Diff View toolbar.
A caveat: with this PR, there is no way to configure the buttons in the
Diff
View toolbar to restore the previous behavior, if we want, I think we
can make
it a setting, but let's see if anyone really wants that.
Release Notes:
- N/A
Closes#25315
Release Notes:
- Fixes an issue where the buffer search options would not be reset when
using `buffer: deploy search` after using Vim search (`*` & `#`) which
enable all search options
Closes#25304
Release Notes:
- Fixed an issue where `active_pane_modifiers` settings would be applied
to a parent pane if one of it's child panes was active
This PR makes it so we include some textual content in the user messages
that as used to send up tool results.
I observed that when sending up the tool results with no text, it would
lead the model to start replying with no text, which would then result
in an error when attaching later tool results.
I think there's a deeper issue at play here, but for now we just include
some text to keep the model on track.
Release Notes:
- N/A
This PR adds an optimistic update when staging or unstaging diff hunks.
In the process, I've also refactored the logic for staging and unstaging
hunks, to consolidate more of it in the `buffer_diff` crate.
I've also changed the way that we treat untracked files. Previously, we
maintained an empty diff for them, so as not to show unwanted
entire-file diff hunks in a regular editor. But then in the project diff
view, we had to account for this, and replace these empty diffs with
entire-file diffs. This form of state management made it more difficult
to store the pending hunks, so now we always use the same
`BufferDiff`/`BufferDiffSnapshot` for untracked files (with a single
hunk spanning the entire buffer), but we just have a special case in
regular buffers, that avoids showing that entire-file hunk.
* [x] Avoid creating a long queue of `set_index` operations when
staging/unstaging rapidly
* [x] Keep pending hunks when diff is recalculated without base text
changes
* [x] Be optimistic even when staging the single hunk in added/deleted
files
* Testing
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <m@cole-miller.net>
This PR updates the ui of the git panel. It removes the header from the
panel and unifies the repository, branch and commit controls in the
bottom section.
It also adds a secondary menu to the primary button giving access to a
variety of actions for managing local and remote changes:
Known issues (will be fixed in a later pr)
- Spinner showing git operation progress was removed, will be re-added
- Clicking expand with the panel editor focused will commit (due to
shared action name. Already tracked)
Before | After
(Also adds `component`, `linkme` to cargo-machete ignore as they are
used in the `IntoComponent` proc-macro and will always be incorrectly
flagged as unused)
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <m@cole-miller.net>
Co-authored-by: Cole Miller <53574922+cole-miller@users.noreply.github.com>
Co-authored-by: Cole Miller <cole@zed.dev>
Closes#10004
This PR adds support for the organize imports action. Previously, you
had to manually configure it in the settings and then use format to run
it.
Note: Default key binding will be `alt-shift-o` which is similar to
VSCode's organize import. Also, because `cmd-shift-o` is taken by
outline picker.
Todo:
- [x] Initial working
- [x] Handle remote
- [x] Handle multi buffer
- [x] Can we make it generic for executing any code action?
Release Notes:
- Added `editor:OrganizeImports` action to organize imports (sort,
remove unused, etc) for supported LSPs. You can trigger it by using the
`alt-shift-o` key binding.
2025-03-01 00:59:09 +05:30
1104 changed files with 100774 additions and 43643 deletions
You are an AI assistant integrated into a text editor. Your goal is to do one of the following two things:
1. Help users answer questions and perform tasks related to their codebase.
2. Answer general-purpose questions unrelated to their particular codebase.
It will be up to you to decide which of these you are doing based on what the user has told you. When unclear, ask clarifying questions to understand the user's intent before proceeding.
You should only perform actions that modify the user’s system if explicitly requested by the user:
- If the user asks a question about how to accomplish a task, provide guidance or information, and use read-only tools (e.g., search) to assist. You may suggest potential actions, but do not directly modify the user’s system without explicit instruction.
- If the user clearly requests that you perform an action, carry out the action directly without explaining why you are doing so.
- The editing actions you perform might produce errors or warnings. At the end of your changes, check whether you introduced any problems, and fix them before providing a summary of the changes you made.
- Do not fix errors unrelated to your changes unless the user explicitly asks you to do so.
Be concise and direct in your responses.
The user has opened a project that contains the following root directories/files. Whenever you specify a path in the project, it must be a relative path which begins with one of these root directories/files:
{{#eachworktrees}}
- `{{root_name}}` (absolute path: `{{abs_path}}`)
{{/each}}
{{#ifhas_rules}}
There are rules that apply to these root directories:
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
