Implements [vim-exchange](https://github.com/tommcdo/vim-exchange)
functionality.
Lets you swap the content of one selection/object/motion with another.
The default key bindings are the same as in exchange:
- `cx` to begin the exchange in normal mode. Visual mode does not have a
default binding due to conflicts.
- `cxx` selects the current line
- `cxc` clears the selection
- If the previous operation was an exchange, `.` will repeat that
operation.
Closes#22759
## Overlapping regions
According to the vim exchange readme:
> If one region is fully contained within the other, it will replace the
containing region.
Zed does the following:
- If one range is completely contained within another: the smaller
region replaces the larger region (as in exchange.vim)
- If the ranges only partially overlap, then we abort and cancel the
exchange. I don't think we can do anything sensible with that. Not sure
what the original does, evil-exchange aborts.
## Not implemented: cross-window exchange
Emacs's evil-exchange allows you to exchange across buffers. There is no
code to accommodate that in this PR. Personally, it'd never occurred to
me before working on this and I've never needed it. As such, I'll leave
that implementation for whomever needs it.
As an upside; this allows you to have concurrent exchange states per
buffer, which may come in handy.
## Bonus
Also adds "replace with register" for the full line with `grr` 🐕 This
was an oversight from a previous PR.
Release notes:
- Added an implementation of `vim-exchange`
- Fixed: Added missing default key binding for `Vim::CurrentLine` for
replace with register mode (`grr`)
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [ctor](https://redirect.github.com/mmastrac/rust-ctor) |
workspace.dependencies | patch | `0.3.1` -> `0.3.6` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xNzMuMSIsInVwZGF0ZWRJblZlciI6IjM5LjE3My4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Closes#25394
Release Notes:
- N/A
Scenarios:
| Scenarios | What it does |
|------|--------|
| Interactive Terminal + Impersonate Active Login | Login without saved
credentials |
| Interactive Terminal + Saved credentials | Login with saved
credentials |
| Interactive Terminal + No credentials | Does nothing |
| Non-interactive Terminal + Saved credentials | Login with saved
credentials |
| Non-interactive Terminal + No credentials | Does nothing |
@maxdeviant : You can take a look at it.
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Closes#22821
It turns out that on Windows, the `Cancel` button should **always** have
a button ID of `2`. Even if the button label is something like "Don't
Cancel", when the user presses the `Esc` key, Windows will still report
that the button with ID `2` was pressed.
Release Notes:
- N/A
This reverts commit a8610fbd13.
I've been seeing some reports of segmentation faults that appear to
point to this change as the culprit.
Closes#25366.
Release Notes:
- Community: Reverted #25040, so remove the corresponding entry from the
release notes.
This is more consistent with the nomenclature in the rest of Zed.
Release Notes:
- Renamed the `editor::ExpandAllHunkDiffs` action to
`editor::ExpandAllDiffHunks`
This PR adds eager loading of the active theme and icon theme set in the
user settings.
Previously for themes and icon themes that were provided by extensions,
we would have to wait until extensions were loaded before we could apply
the themes.
In some cases this could lead to a visible delay during which time the
user would see the default themes, and then switch to their desired
themes once extensions had loaded.
To avoid this, we now take a fast path of loading the active themes
directly from the filesystem so that we can load them as soon as
possible.
Closes#10173 and #25305.
Release Notes:
- Added eager loading of the active theme and icon theme. This should
address some reports of seeing the default themes briefly on startup.
Closes#7711
This PR changes the file finder to shorten the path portion of each
match by replacing a segment with `...`, if it would otherwise overflow
horizontally. Details:
- The overflow calculation is based on a crude linear width estimate for
ASCII text at the current em width. No elision is done for non-ASCII
paths.
- A path component will not be elided if it contains a matching position
for the file finder's search, or if it's the first or last component.
- Elision is only applied when it is successful in shortening the path
enough to not overflow.
Release Notes:
- Improved the appearance of the file finder when long paths are shown
by eliding path segments
The deafen audio button wasn't visible in the titlebar unless you had
the 'use microphone permission'. Meaning if I would join a call, and
didn't receive permission to speak, I wouldn't be able to use the deafen
audio button.
Now the button is directly visible when you join a call. So you can
deafen the audio even if you didn't receive the mic permission.
Release Notes:
- N/A
This PR fixes a panic that would occur when loading an extension using
v0.2.0 of the extension API after #25357 landed:
```
Thread "<unnamed>" panicked with "called `Result::unwrap()` on an `Err` value: map entry `zed:extension/github` defined twice" at crates/extension_host/src/wasm_host/wit.rs:38:31
10a6cd00e7/src/crates/extension_host/src/wasm_host/wit.rs (L38) (may not be uploaded, line may be incorrect if files modified)
0: backtrace::backtrace::libunwind::trace
at /Users/maxdeviant/.cargo/registry/src/index.crates.io-6f17d22bba15001f/backtrace-0.3.74/src/backtrace/libunwind.rs:116:5
backtrace::backtrace::trace_unsynchronized
at /Users/maxdeviant/.cargo/registry/src/index.crates.io-6f17d22bba15001f/backtrace-0.3.74/src/backtrace/mod.rs:66:5
1: backtrace::backtrace::trace
at /Users/maxdeviant/.cargo/registry/src/index.crates.io-6f17d22bba15001f/backtrace-0.3.74/src/backtrace/mod.rs:53:14
2: backtrace::capture::Backtrace::create
at /Users/maxdeviant/.cargo/registry/src/index.crates.io-6f17d22bba15001f/backtrace-0.3.74/src/capture.rs:292:9
3: backtrace::capture::Backtrace::new
at /Users/maxdeviant/.cargo/registry/src/index.crates.io-6f17d22bba15001f/backtrace-0.3.74/src/capture.rs:257:22
4: zed::reliability::init_panic_hook::{{closure}}
at /Users/maxdeviant/projects/zed/crates/zed/src/reliability.rs:56:29
5: <alloc::boxed::Box<F,A> as core::ops::function::Fn<Args>>::call
at /rustc/eeb90cda1969383f56a2637cbd3037bdf598841c/library/alloc/src/boxed.rs:2084:9
std::panicking::rust_panic_with_hook
at /rustc/eeb90cda1969383f56a2637cbd3037bdf598841c/library/std/src/panicking.rs:808:13
6: std::panicking::begin_panic_handler::{{closure}}
at /rustc/eeb90cda1969383f56a2637cbd3037bdf598841c/library/std/src/panicking.rs:674:13
7: std::sys::backtrace::__rust_end_short_backtrace
at /rustc/eeb90cda1969383f56a2637cbd3037bdf598841c/library/std/src/sys/backtrace.rs:168:18
8: rust_begin_unwind
at /rustc/eeb90cda1969383f56a2637cbd3037bdf598841c/library/std/src/panicking.rs:665:5
9: core::panicking::panic_fmt
at /rustc/eeb90cda1969383f56a2637cbd3037bdf598841c/library/core/src/panicking.rs:74:14
10: core::result::unwrap_failed
at /rustc/eeb90cda1969383f56a2637cbd3037bdf598841c/library/core/src/result.rs:1679:5
11: core::result::Result<T,E>::unwrap
at /rustc/eeb90cda1969383f56a2637cbd3037bdf598841c/library/core/src/result.rs:1102:23
extension_host::wasm_host::wit::new_linker
at /Users/maxdeviant/projects/zed/crates/extension_host/src/wasm_host/wit.rs:38:5
12: extension_host::wasm_host::wit::since_v0_2_0::linker::{{closure}}
at /Users/maxdeviant/projects/zed/crates/extension_host/src/wasm_host/wit/since_v0_2_0.rs:43:9
13: std::sync::once_lock::OnceLock<T>::get_or_init::{{closure}}
at /rustc/eeb90cda1969383f56a2637cbd3037bdf598841c/library/std/src/sync/once_lock.rs:276:50
14: std::sync::once_lock::OnceLock<T>::initialize::{{closure}}
at /rustc/eeb90cda1969383f56a2637cbd3037bdf598841c/library/std/src/sync/once_lock.rs:483:19
15: std::sync::once::Once::call_once_force::{{closure}}
at /rustc/eeb90cda1969383f56a2637cbd3037bdf598841c/library/std/src/sync/once.rs:217:40
16: std::sys::sync::once::queue::Once::call
at /rustc/eeb90cda1969383f56a2637cbd3037bdf598841c/library/std/src/sys/sync/once/queue.rs:183:21
17: std::sync::once::Once::call_once_force
at /rustc/eeb90cda1969383f56a2637cbd3037bdf598841c/library/std/src/sync/once.rs:217:9
18: std::sync::once_lock::OnceLock<T>::initialize
at /rustc/eeb90cda1969383f56a2637cbd3037bdf598841c/library/std/src/sync/once_lock.rs:482:9
19: std::sync::once_lock::OnceLock<T>::get_or_try_init
at /rustc/eeb90cda1969383f56a2637cbd3037bdf598841c/library/std/src/sync/once_lock.rs:364:9
20: std::sync::once_lock::OnceLock<T>::get_or_init
at /rustc/eeb90cda1969383f56a2637cbd3037bdf598841c/library/std/src/sync/once_lock.rs:276:15
21: extension_host::wasm_host::wit::since_v0_2_0::linker
at /Users/maxdeviant/projects/zed/crates/extension_host/src/wasm_host/wit/since_v0_2_0.rs:42:5
22: extension_host::wasm_host::wit::Extension::instantiate_async::{{closure}}
at /Users/maxdeviant/projects/zed/crates/extension_host/src/wasm_host/wit.rs:122:17
23: extension_host::wasm_host::WasmHost::load_extension::{{closure}}
at /Users/maxdeviant/projects/zed/crates/extension_host/src/wasm_host.rs:385:14
24: <core::pin::Pin<P> as core::future::future::Future>::poll
at /rustc/eeb90cda1969383f56a2637cbd3037bdf598841c/library/core/src/future/future.rs:123:9
25: async_task::raw::RawTask<F,T,S,M>::run
at /Users/maxdeviant/.cargo/registry/src/index.crates.io-6f17d22bba15001f/async-task-4.7.1/src/raw.rs:557:17
26: async_task::runnable::Runnable<M>::run
at /Users/maxdeviant/.cargo/registry/src/index.crates.io-6f17d22bba15001f/async-task-4.7.1/src/runnable.rs:781:18
27: gpui::platform::mac::dispatcher::trampoline
at /Users/maxdeviant/projects/zed/crates/gpui/src/platform/mac/dispatcher.rs:106:5
28: <unknown>
29: <unknown>
30: <unknown>
31: _pthread_mach_thread_np
```
We don't need the added `add_to_linker` calls anymore.
Release Notes:
- N/A
On macos:
- user has the required permission to screen share.
- user doesn't have the can_use_microphone permission
When an user doesn't have the can_use_microphone permission the screen
share icon would be visible. If an user therefor would click on it, we
would give the error that they don't have the permission given to zed to
screen share. (which is false).
I've tested this together with @JosephTLyons because we first thought it
was a mac os permission issue.
Should we mention in the zed.dev/docs/collaboration what kind of
permissions are needed to be able to screen share?
Release Notes:
- Fixed: Screen sharing would be visible even when user didn't have the
right permission resulting in errors later on.
Closes https://github.com/zed-industries/zed/issues/24883
While this PR closes the issue above, it still doesn't implement a
bullet-proof solution for the context menu docs aside, meaning, it might
not work the best way if there are other places using it (like the
Editor Controls menu). For that, I think we'll want a more robust
collision-aware solution, possibly similar to the LSP completion menu.
Release Notes:
- N/A
---------
Co-authored-by: Agus Zubiaga <hi@aguz.me>
Co-authored-by: Nate Butler <1714999+iamnbutler@users.noreply.github.com>
Closes#7145
Currently, terminal persistence is global, i.e. split configurations are
restored across all workspaces.
This PR changes it to per-workspace, so configurations are restored only
within the same workspace. Opening a new window will start with a fresh
terminal.
https://github.com/user-attachments/assets/d43fe747-9f28-4723-b409-e8dbb3a23912
Release Notes:
- Improved terminal reopening to be per workspace instead of global.
This is a ~workaround for next-ls not handling null workspace folders in
initialize request
Related to #25264
/cc @timfjord
Closes #ISSUE
Release Notes:
- Changed how workspace folders are shared with language servers, fixing
a startup issue with `next-ls` in the process.
Release Notes:
- Fixed issue where `true` and `false` were highlighted as constants,
ignoring the `boolean` highlight defined in themes.
- This fix applies to: C, C++, Go, JSON, JSONC, Python, and Rust.
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
This is second part needed for #17819.
There is already binding in default bindings: `"menu":
"editor::OpenContextMenu",` (but won't work on windows without this
change)
Release Notes:
- Handle "menu" key in windows
This reverts commit 2f416aebbe.
We shouldn't have merged this yet, as it currently breaks syntax
highlighting for some languages that haven't had their requisite changes
merged yet.
We also need to be aware of the impact this will have on downstream
themes.
@chbk We should bundle any changes to the themes with the specific
language highlights that depend on those changes (and if there are
multiple languages that need the same change then pick one language to
come first and then stack the rest of the changes on top of that).
Release Notes:
- Community: This is a revert of
https://github.com/zed-industries/zed/pull/25323, so remove those notes
from the release notes.
This PR addresses 3 issues with the common scrollbar component used in
the Terminal, Outline Panel, etc.
1. Extremely small or invisible scrollbar for long content.
2. Flickering issue when the thumb is already at the bottom-most
position, and the user tries to overscroll.
3. Scrollbar appearing even when there is no excessive content to
scroll.
Before:
<img width="300" alt="image"
src="https://github.com/user-attachments/assets/8a124a72-3b56-4bef-858a-a4942c871829"
/>
After:
<img width="300" alt="Screenshot 2025-02-21 at 3 26 32 AM"
src="https://github.com/user-attachments/assets/2a8a5796-b332-4c06-84b2-226d2de6e300"
/>
Release Notes:
- Fixed extremely small scrollbar thumb for long content in Terminal,
Outline Panel, and more.
---------
Co-authored-by: Danilo <danilo@zed.dev>
Co-authored-by: Richard Feldman <oss@rtfeldman.com>
Covers part of #5129 by adding `MoveToStartOfExcerpt`,
`MoveToEndOfExcerpt`, `SelectToStartOfExcerpt`, and
`SelectToEndOfExcerpt`.
No default linux bindings yet as it's unclear what to use. Currently,
`ctrl-up` / `ctrl-down` scroll up and down by one line (see #13269).
Considering changing the meaning of those.
Mac:
* Previously `cmd-up` and `cmd-down` were `editor::MoveToBeginning` and
`editor::MoveToEnd`. In singleton editors these will behave the same as
before. In multibuffers, they will now step through excerpts instead of
jumping to the beginning / end of the multibuffer.
* `cmd-home` and `cmd-end`, often typed as `cmd-fn-left` and
`cmd-fn-right` are now `editor::MoveToBeginning` and
`editor::MoveToEnd`. This is useful in multibuffers.
Release Notes:
- Mac: `cmd-up` now moves to the previous
multibuffer excerpt start, and `cmd-down` moves to the next multibuffer
excerpt end. Within normal buffers these behave the same as before, moving
to the beginning or end.
Related to #18300
Release Notes:
- Improved diagnostic pane responsiveness with large # of diagnostics.
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Closes #ISSUE
Release Notes:
- Fix some language servers (elixir-ls, tailwindcss, phpactor) failing
to start up due to an unfilled root_uri property in the InitializeParams
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Discards an inline completion when it's toggled to off (using, say, a
keyboard shortcut). This matches the behaviour in VS Code and JetBrains,
and I think is a bit more intuitive.
(https://github.com/zed-industries/zed/discussions/24895)
Release Notes:
- N/A
This PR changes the default credentials provider used in developments
builds of Zed to the development credentials provider.
Previously this required setting `ZED_DEVELOPMENT_AUTH=1` in order to
opt-in to the development credentials provider.
This led to confusion for new Zed employees who did not know that this
environment variable existed.
If you do need to interact with the system keychain for some reason, you
can run Zed with:
```
ZED_DEVELOPMENT_USE_KEYCHAIN=1
```
`ZED_DEVELOPMENT_AUTH` is dead. Long live Zed development auth!
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/4461
This PR improves the coding experience by hiding the mouse while the
user is typing so it does not accidentally get in their way, making it
challenging to ready characters in the editor.
Release Notes:
- The following PR hides the cursor when the user is typing by adding a
new cursor style called `None`.
- Assuming the user does not move the mouse, it will stay hidden until
it is moved again.
https://github.com/user-attachments/assets/6ba9f2ee-b9f3-4595-81e4-e9d986da4a39
---------
Co-authored-by: Agus <agus@zed.dev>
Co-authored-by: Peter Tripp <peter@zed.dev>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
This PR adds a new `CredentialsProvider` trait that abstracts over
interacting with the system keychain.
We had previously introduced a version of this scoped just to Zed auth
in https://github.com/zed-industries/zed/pull/11505.
However, after landing https://github.com/zed-industries/zed/pull/25123,
we now have a similar issue with the credentials for language model
providers that are also stored in the keychain (and thus also produce a
spam of popups when running a development build of Zed).
This PR takes the existing approach and makes it more generic, such that
we can use it everywhere that we need to read/store credentials in the
keychain.
There are still two credential provider implementations:
- `KeychainCredentialsProvider` will interact with the system keychain
(using the existing GPUI APIs)
- `DevelopmentCredentialsProvider` will use a local file on the file
system
We only use the `DevelopmentCredentialsProvider` when:
1. We are running a development build of Zed
2. The `ZED_DEVELOPMENT_AUTH` environment variable is set
- I am considering removing the need for this and making it the default,
but that will be explored in a follow-up PR.
Release Notes:
- N/A
Closes #ISSUE
Before this, in Vim mode, as long as the window loses focus, regardless
of the current cursor shape, it will definitely switch to a hollow
cursor.
Release Notes:
- Fixed vim cursor shape hollow only in block
Give the inline file crease inside of `assistant2`'s editor a
selection background when there is a selection over it
Release Notes:
- N/A
---------
Co-authored-by: Piotr <piotr@zed.dev>
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Closes#25230
```
The shift- modifier can only be used in combination with a letter to indicate the uppercase version. For example shift-g matches typing G. Although on many keyboards shift is used to type punctuation characters like (, the keypress is not considered to be modified and so shift-( does not match.
```
[Document](https://zed.dev/docs/key-bindings#keybinding-syntax)
Release Notes:
- Fixed Keymap use `shift-` modifier symbol
Closes#24931
We've flipped back and forth at least once on whether the last or first
added keybinding should be shown in different contexts (See
[this](https://github.com/zed-industries/zed/issues/23621#issuecomment-2614061385)
as well as #23621 and the subsequent #23660)
This PR attempts to pick a side to stick with so that we are at least
consistent until #23660 is resolved and we have a way to determine which
keybinds to display in a manner that is both consistent and not
confusing
Release Notes:
- N/A
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [clap](https://redirect.github.com/clap-rs/clap) |
workspace.dependencies | patch | `4.5.29` -> `4.5.30` |
---
### Release Notes
<details>
<summary>clap-rs/clap (clap)</summary>
###
[`v4.5.30`](https://redirect.github.com/clap-rs/clap/blob/HEAD/CHANGELOG.md#4530---2025-02-17)
[Compare
Source](https://redirect.github.com/clap-rs/clap/compare/v4.5.29...v4.5.30)
##### Fixes
- *(assert)* Allow `num_args(0..=1)` to be used with `SetTrue`
- *(assert)* Clean up rendering of `takes_values` assertions
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xNzMuMSIsInVwZGF0ZWRJblZlciI6IjM5LjE3My4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [blake3](https://redirect.github.com/BLAKE3-team/BLAKE3) |
workspace.dependencies | minor | `1.5.5` -> `1.6.0` |
---
### Release Notes
<details>
<summary>BLAKE3-team/BLAKE3 (blake3)</summary>
###
[`v1.6.0`](https://redirect.github.com/BLAKE3-team/BLAKE3/releases/tag/1.6.0)
[Compare
Source](https://redirect.github.com/BLAKE3-team/BLAKE3/compare/1.5.5...1.6.0)
version 1.6.0
Changes since 1.5.5:
- Add Hash::from_slice.
([#​448](https://redirect.github.com/BLAKE3-team/BLAKE3/issues/448))
- Fix a build error on Windows 7 targets.
([#​447](https://redirect.github.com/BLAKE3-team/BLAKE3/issues/447))
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xNzMuMSIsInVwZGF0ZWRJblZlciI6IjM5LjE3My4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [sea-orm](https://www.sea-ql.org/SeaORM)
([source](https://redirect.github.com/SeaQL/sea-orm)) | dev-dependencies
| patch | `1.1.4` -> `1.1.5` |
| [sea-orm](https://www.sea-ql.org/SeaORM)
([source](https://redirect.github.com/SeaQL/sea-orm)) | dependencies |
patch | `1.1.4` -> `1.1.5` |
---
### Release Notes
<details>
<summary>SeaQL/sea-orm (sea-orm)</summary>
###
[`v1.1.5`](https://redirect.github.com/SeaQL/sea-orm/blob/HEAD/CHANGELOG.md#115---2025-02-14)
[Compare
Source](https://redirect.github.com/SeaQL/sea-orm/compare/1.1.4...1.1.5)
##### New Features
- Added `Schema::json_schema_from_entity` to construct a schema
description in json for the given Entity
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about these
updates again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xNzMuMSIsInVwZGF0ZWRJblZlciI6IjM5LjE3My4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [tempfile](https://stebalien.com/projects/tempfile-rs/)
([source](https://redirect.github.com/Stebalien/tempfile)) |
workspace.dependencies | minor | `3.16.0` -> `3.17.1` |
---
### Release Notes
<details>
<summary>Stebalien/tempfile (tempfile)</summary>
###
[`v3.17.1`](https://redirect.github.com/Stebalien/tempfile/blob/HEAD/CHANGELOG.md#3171)
[Compare
Source](https://redirect.github.com/Stebalien/tempfile/compare/v3.17.0...v3.17.1)
- Fix build with `windows-sys` 0.52. Unfortunately, we have no CI for
older `windows-sys` versions at the moment...
###
[`v3.17.0`](https://redirect.github.com/Stebalien/tempfile/blob/HEAD/CHANGELOG.md#3170)
[Compare
Source](https://redirect.github.com/Stebalien/tempfile/compare/v3.16.0...v3.17.0)
- Make sure to use absolute paths in when creating unnamed temporary
files (avoids a small race in the "immediate unlink" logic) and in
`Builder::make_in` (when creating temporary files of arbitrary types).
- Prevent a theoretical crash that could (maybe) happen when a temporary
file is created from a drop function run in a TLS destructor. Nobody has
actually reported a case of this happening in practice and I have been
unable to create this scenario in a test.
- When reseeding with `getrandom`, use platform (e.g., CPU) specific
randomness sources where possible.
- Clarify some documentation.
- Unlink unnamed temporary files on windows *immediately* when possible
instead of waiting for the handle to be closed. We open files with
"Unix" semantics, so this is generally possible.
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xNzMuMSIsInVwZGF0ZWRJblZlciI6IjM5LjE3My4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Closes#12064
It feels a bit strange to use `brackets` for this but it seems to work
without unintended consequences from my testing so far.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [serde_json](https://redirect.github.com/serde-rs/json) | dependencies
| patch | `1.0.138` -> `1.0.139` |
| [serde_json](https://redirect.github.com/serde-rs/json) |
workspace.dependencies | patch | `1.0.138` -> `1.0.139` |
---
### Release Notes
<details>
<summary>serde-rs/json (serde_json)</summary>
###
[`v1.0.139`](https://redirect.github.com/serde-rs/json/releases/tag/v1.0.139)
[Compare
Source](https://redirect.github.com/serde-rs/json/compare/v1.0.138...v1.0.139)
- Documentation improvements
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about these
updates again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xNzMuMSIsInVwZGF0ZWRJblZlciI6IjM5LjE3My4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [anyhow](https://redirect.github.com/dtolnay/anyhow) |
workspace.dependencies | patch | `1.0.95` -> `1.0.96` |
---
### Release Notes
<details>
<summary>dtolnay/anyhow (anyhow)</summary>
###
[`v1.0.96`](https://redirect.github.com/dtolnay/anyhow/releases/tag/1.0.96)
[Compare
Source](https://redirect.github.com/dtolnay/anyhow/compare/1.0.95...1.0.96)
- Documentation improvements
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xNzMuMSIsInVwZGF0ZWRJblZlciI6IjM5LjE3My4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Closes #ISSUE
Release Notes:
- Rename `editor::RevertSelectedHunks` and `editor::RevertFile` to
`git::Restore` and `git::RestoreFile` for consistency with git
Closes https://github.com/zed-industries/zed/issues/10122
Closes https://github.com/zed-industries/zed/issues/25034
When formatting buffers or reloading them after they change on disk, we
performed a diff between the buffer's current contents and the new
content. We need this diff in order preserve the positions of cursors
and other decorations when updating the buffer's text.
In order to handle changes within lines, we would previously compute a
*character-wise* diff. This was extremely expensive for large files.
This PR gets rid of the character-wise diff, and instead performs a
normal line-wise diff. Then, for certain replace hunks, we compute a
secondary word-based diff. Also, I've switched to the
[`imara-diff`](https://github.com/pascalkuthe/imara-diff) crate, instead
of `similar`.
Release Notes:
- Fixed a hang that could occur when large files were changed on disk or
formatted.
I've seen that the Theme modal has a footer with 2 links: Theme Docs
(which links to Configuration > Themes) on the left, Install Themes on
the right. I've basically done the same to the Icon Theme modal -
however we seem to be missing a Configuration > Icon Themes doc, I've
basically checked how it was made for Themes and pretty much adapted for
Icon Themes. Maybe a better solution would be to combine both. Or add
Icon themes section under Themes.
I hope somebody from Zed can have a look and adapt this PR where needed.
<img width="553" alt="Screenshot 2025-02-19 at 6 37 20 PM"
src="https://github.com/user-attachments/assets/30602027-b7a7-4690-ba05-fc9eac313e67"
/>
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [mdbook](https://redirect.github.com/rust-lang/mdBook) | dependencies
| patch | `0.4.44` -> `0.4.45` |
---
### Release Notes
<details>
<summary>rust-lang/mdBook (mdbook)</summary>
###
[`v0.4.45`](https://redirect.github.com/rust-lang/mdBook/blob/HEAD/CHANGELOG.md#mdBook-0445)
[Compare
Source](https://redirect.github.com/rust-lang/mdBook/compare/v0.4.44...v0.4.45)
[v0.4.44...v0.4.45](https://redirect.github.com/rust-lang/mdBook/compare/v0.4.44...v0.4.45)
##### Changed
- Added context to error message when rustdoc is not found.
[#​2545](https://redirect.github.com/rust-lang/mdBook/pull/2545)
- Slightly changed the styling rules around margins of footnotes.
[#​2524](https://redirect.github.com/rust-lang/mdBook/pull/2524)
##### Fixed
- Fixed an issue where it would panic if a source_path is not set.
[#​2550](https://redirect.github.com/rust-lang/mdBook/pull/2550)
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xNzMuMSIsInVwZGF0ZWRJblZlciI6IjM5LjE3My4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR fixes a comment in the `cli` crate that seems to have been
inadvertently changed in #25185.
I also reworded it to be a bit more formal.
Release Notes:
- N/A
Release Notes:
- Added an `on_last_window_closed` setting, that allows users to quit
the app when the last window is closed
---------
Co-authored-by: Richard <richard@zed.dev>
Release Notes:
- Added support for checking for `package-version-server` on the
`$PATH`.
---------
Signed-off-by: Matthew Penner <me@matthewp.io>
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
This PR adds a new `allow_rewrap` setting to control how
`editor::Rewrap` behaves for a given language.
This is a language setting, so it can either be configured globally or
within the context of an individual language.
For example:
```json
{
"allow_rewrap": "in_selections",
"languages": {
"Typst": {
"allow_rewrap": "anywhere"
}
}
}
```
There are three different values:
- `in_comment`: Only perform rewrapping within comments.
- `in_selections`: Only perform rewrapping within the current
selection(s).
- `anywhere`: Allow rewrapping anywhere.
The global default is `in_comment`, as it is the most conservative
option and allows rewrapping comments without risking breaking other
syntax.
The `Markdown` and `Plain Text` languages default to `anywhere`, which
mirrors the previous behavior for those language that was hard-coded
into the rewrap implementation.
This setting does not have any effect in Vim mode, as Vim mode already
allowed rewrapping anywhere.
Closes https://github.com/zed-industries/zed/issues/24242.
Release Notes:
- Added an `allow_rewrap` setting to control the `editor::Rewrap`
behavior for a given language.
The language::markdown crate had been superceded by markdown::Mardown.
After #25117, the only two remaining use-cases were rendering git commit
messages (which are arguably not really markdown) and the signature help
(which is definitely not markdown).
Updated the former to use the new markdown component, and the latter to
do syntax highlighting manually.
Release Notes:
- Allow selecting the commit message in git commits
Closes#22610
This PR fixes the invisible scroll thumb or very tiny scroll thumb when
viewing long or wide files.
The difference between `track_bounds` (imagine scrollbar total height)
and `thumb_size` is the remaining area, which maps to the total height
of the page for scrolling to work as expected. This is already accounted
for. That means we can adjust the thumb size as needed, and the
remaining height/width will be mapped correctly.
So, we can simply use define a minimum size for the thumb and handle
cases where the track bounds are smaller than the defined minimum size.
In such cases, the scrollbar will take up the full height/width of the
track bounds. This is handled mainly to avoid panics in extreme edge
cases. Practically, at such small heights/widths, users are unlikely to
attempt scrolling.
Before:
https://github.com/user-attachments/assets/cf2edf03-8b9a-4678-b3c6-9dcbd01e5db8
After:
https://github.com/user-attachments/assets/e9496a44-3e7d-4be7-b892-2762cccd9959
Release Notes:
- Fixed issue where scroll thumb was invisible or too small when viewing
long or wide files.
- Hides header when no active repo/no repo
- Entire commit editor now has i-beam cursor on hover
- Adds an icon to the project diff tab
Release Notes:
- N/A
This reverts commit 9ef0501853 due to a
panic.
```
{
"thread": "main",
"payload": "9 is not a valid char boundary in path \"crates/…/LiveKitBridge/\"",
"location_data": {
"file": "crates/file_finder/src/file_finder.rs",
"line": 646
}
}
```
Release Notes:
- N/A
Felt like this was relevant particularly as we're living with both
`trigger` and `trigger_with_tooltip`. At some point, I believe there
should be only one (`trigger_with_tooltip`) and that should be then
renamed to just `trigger` back again! We're supporting both for now just
for ease of migration/avoiding big changes.
Release Notes:
- N/A
When selecting text, it highlights all matching occurences along with
selected text itself. This causes highlight overlap, which looks bit
odd. This PR fixes it.
Bonus:
Context: We have an edge case (which we already cover) where we don’t
want to clear `SelectedTextHighlight` every time the selection changes.
This happens when you are dragging the selection across some word, if
you clear it directly on selection change, due to debounce wait, the
highlight take some time to appear, which causes flickering for the
user. We solve this by not clearing it directly but only clearing it
when a new selection is found. This avoids the flicker.
However, we also need to clear the selection even before the debounce
wait if we detect early on that the selection is different from previous
ones. Otherwise, the user will have to wait until the debounce time to
see it cleared on the screen.
The code for this is a little repetitive because we check the buffer
state both before and after the debounce. But this is necessary.
---
Before:
Notice overlapping corners and selected text is bit darker in this case.
After:
Release Notes:
- N/A
Closes#16951
Handle the case where you click on the terminal while pressing Shift.
Instead of setting a new selection head, we simply update the selection
to that point. This allows you to repeatedly extend the selection to new
points by pressing Shift while preserving the original selection head.
Preview:
Selection works in direct terminal, but doesn't on Vim like program,
which is expected.
https://github.com/user-attachments/assets/e46987d8-a9a3-495d-8dd9-98d461317a8d
Release Notes:
- Added ability to extend selection with Shift + click in the terminal.
Closes#18641
Contributes: #13194
Release Notes:
- Open LSP documentation file links in Zed not the system opener
- Render completion documentation markdown consistently with
documentation markdown
Closes#24951
We were highlighting both as `@variable.special` however, they are
_techinically_ keywords and other editors (VSCode/WebStorm) seem to
highlight them as keywords as well.
Release Notes:
- N/A
This PR fixes an issue where configured language model providers would
not show up unless the configuration view was opened.
The problem was that we were filtering unauthenticated language model
providers out of the language model selector, but would only
authenticate the active provider when the selector loaded.
Authenticating the rest of the providers was deferred until the
configuration view was opened for the first time.
Closes https://github.com/zed-industries/zed/issues/21821.
Release Notes:
- Fixed an issue where configured languages models were not showing up
in the language model selector until the configuration view was opened
for the first time.
This PR updates the `LanguageModelProvider::authenticate` method to
return an `AuthenticateError` instead of an `anyhow::Error`.
This allows us to model the "credentials not found" state explicitly as
`AuthenticateError::CredentialsNotFound`, which enables the caller to
check for this state and act accordingly.
Planning to use this in #25123 to silence errors about missing
credentials when authenticating providers in the background.
Release Notes:
- N/A
This PR fixes an issue where the thread history would only work in one
Zed window at a time.
The backing LMDB database can only be opened once per Zed instance.
However, the `ThreadStore` has one instance per Zed window.
To fix this, we need to create the `heed` environment once and store it
as a global, and then reference the same environment across all of the
`ThreadStore`s.
Release Notes:
- N/A
Done automatically with
> ast-grep -p '$A.background_executor().spawn($B)' -r
'$A.background_spawn($B)' --update-all --globs "\!crates/gpui"
Followed by:
* `cargo fmt`
* Unexpected need to remove some trailing whitespace.
* Manually adding imports of `gpui::{AppContext as _}` which provides
`background_spawn`
* Added `AppContext as _` to existing use of `AppContext`
Release Notes:
- N/A
We've decided to go in a different direction on indicating the staged
status of hunks, so go back for now to a world where we don't display
staged and unstaged hunks differently outside the (still gated) project
diff editor.
cc @iamnbutler
This reverts commit 8c202b3b09.
Release Notes:
- N/A
We begin a columnar selection when we drag the mouse while holding
`alt-shift`. This PR makes it possible to start the selection and then
turn it into columnar by pressing `alt-shift`.
Fixes#5372
Release Notes:
- Support switching to columnar selection by pressing `alt-shift` while
mouse is down
This PR makes it so we don't log errors for missing themes or icon
themes until after the extensions have been loaded.
Currently, if you are using a theme that is defined in an extension it
is common to see one or more "theme not found" errors in the logs. This
is the result of us having to initialize the theme before the extensions
have actually finished loading.
This means that a theme that _may_ exist once extensions load is
considered non-existent before they have loaded.
To that end, we now wait until the extensions have loaded before we
start logging errors if we can't find the theme or icon theme.
Closes https://github.com/zed-industries/zed/issues/24539.
Release Notes:
- Reduced the number of "theme not found" and "icon theme not found"
errors in the logs for themes provided by extensions.
This PR updates the `ThemeRegistry` to return structured errors from the
`get` and `get_icon_theme` methods (which are used to retrieve themes
and icon themes, respectively).
We want to be able to carry the name of the theme that was not found as
state on the error, which is why we use a `Result` and not an `Option`.
However, we also want to be able to accurately identify when the error
case is "not found" so we can take appropriate action, based on the
circumstances.
By using a custom error type instead of an `anyhow::Error`, we get both.
There isn't any functional change in this PR. This just sets us up for
future improvements in this error.
Release Notes:
- N/A
For symlinks, return `None` from `load_committed_text` as we do from
`load_index_text` ever since #10037.
Release Notes:
- Fixed diff hunks appearing in unchanged symlinked files
This PR makes progress on #7711 by identifying any common prefix of the
paths in the file finder's search results, and replacing the "interior"
of that prefix---every path segment but the first and last---with `...`,
when a heuristic indicates that the longest path would otherwise
overflow the modal.
The elision is not applied to any segment that contains a match for the
search query.
There may be more work to do on #7711 in the case of long result paths
that do not share a significant common prefix.
Release Notes:
- Improved display of long paths in the file finder modal
Co-authored-by: Max <max@zed.dev>
Super subtle, but when I initially saw just "Close", I got weirded out
asking myself "why there's a menu item to close the context menu?", to
only then realize that it didn't close the menu, but the terminal _tab_.
Might be obvious, because that's how buffer tabs are labled, but I don't
know, it feels like the redundancy here is overall positive.
Release Notes:
- N/A
Some language servers report version 0 even if the buffer hasn't been
opened yet. We detect this case and treat it as if the version was
`None`.
Closes#23706
Release Notes:
- Fixed a bug that prevented renames for some languages.
This PR reverts two recent commits that changed our gutter highlights to
mark separately the deleted and added portions of an expanded
modification hunk. It returns to the previous status quo where the
gutter highlight for an expanded modification hunk has the same color
for the deleted and added portions.
Release Notes:
- N/A
When saving an item, some logic is done to determine whether one can
save it. In the special case where the intent is to `SaveAs`, it was
previously allowed to proceed as long as the buffer was a singleton
(presumably since it only makes sense to provide a save path for a
single file). However, we need to _also_ check that this item can be
"saved as" at all.
For this, we resurrect the `ItemHandle`/`Item` trait method
`can_save_as`. We have given it the default implementation of returning
`false`, and then overridden this in the implementation for
`TerminalView`.
Closes#25023
Release Notes:
- Fixed crash when trying to save terminal buffer
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Follow-up to: https://github.com/zed-industries/zed/pull/25025
Removing the `track_focus` method fix the focus hijack that we
introduced in the previous PR. cc @0xtimsb
Also, I don't see any immediate affect in the actual scrollbar behavior
without this! Holler if that's not the case.
Release Notes:
- N/A
### Overview
This PR improves the existing
[mini.ai‐like](https://github.com/echasnovski/mini.ai) text-object logic
for both “AnyQuotes” (quotes) and “AnyBrackets” (brackets) by adding a
multi‐line fallback. The first pass searches only the current line for a
best match (cover or next); if none are found, we do a multi‐line pass.
This preserves mini.ai's usual “line priority” while ensuring we can
detect pairs that start on one line and end on another.
### What Changed
1. Brackets
- Line-based pass uses `gather_line_brackets(map, caret.row()) `to find
bracket pairs `((), [], {}, <>) `on the caret’s line.
- If that fails, we call `gather_brackets_multiline(map)` to single‐pass
scan the entire buffer, collecting bracket pairs that might span
multiple lines.
- Finally, we apply the mini.ai “**cover or next**” logic
(`pick_best_range`) to choose the best.
2. Quotes
- Similar line-based pass with `gather_line_quotes(map, caret.row())`.
- If no local quotes found, we do a multi‐line fallback with
`gather_quotes_multiline(map)`, building a big string for the whole
buffer and using naive regex for "...", '...', and `...`.
- Also preserves “inner vs. outer” logic:
- For inner (e.g. `ciq`), we skip bounding quotes or brackets if the
range is at least 2 characters wide.
- For outer (`caq`), we return the entire range.
3. Shared “`finalize`” helpers
- `finalize_bracket_range` and `finalize_quote_range` handle the “inner”
skip‐chars vs. “outer” logic.
- Both rely on the same “line first, then full fallback” approach.
### Why This Matters
- **Old Behavior**: If you had multi‐line brackets { ... } or multi‐line
quotes spanning multiple lines, they weren’t found at all, since we only
scanned line by line. That made text objects like ci{ or ciq fail in
multi-line scenarios.
- **New Behavior**: We still do a quick line pass (for user‐friendly
“line priority”), but now if that fails, we do a single‐pass approach
across the entire buffer. This detects multi‐line pairs and maintains
mini.ai’s “cover‐or‐next” picking logic.
### Example Use Cases
- **Curly braces:** e.g., opening { on line 10, closing } on line 15 →
previously missed; now recognized.
- **Multi‐line quotes**: e.g., "'Line 1\nLine 2', no longer missed. We
do gather_quotes_multiline with a naive regex matching across newlines.
### Tests
- Updated and expanded coverage in:
- test_anyquotes_object:
- Includes a multi-line '...' test case.
- E.g. 'first' false\n<caret>string 'second' → ensuring we detect
multi‐line quotes.
- test_anybrackets_object:
- Verifies line‐based priority but also multi‐line bracket detection.
- E.g., an open bracket ( on line 3, close ) on line 5, which used to
fail.
### Limitations / Future Enhancements
- **Escaping**: The current approach for quotes is naive and doesn’t
handle escape sequences (like \") or advanced parser logic. For deeper
correctness, we’ll need more advanced logic, this is also not supported
in the original mini.ai plugin so it is a known issue that won't be
attended for now.
### Important Notes
- Fix for the bug: https://github.com/zed-industries/zed/issues/23889
this PR addresses that bug specifically for the AnyQuotes text object.
Note that the issue still remains in the built-in motions (ci', ci",
ci`).
- Caret Position Differences: The caret position now slightly deviates
from Vim’s default behavior. This is intentional. I aim to closely mimic
the mini.ai plugin. Because these text objects are optional
(configurable via vim.json), this adjusted behavior is considered
acceptable and in my opinion the new behavior is better and it should be
the default in vim. Please review the new tests for details and context.
- Improved Special Cases: I’ve also refined how “false strings” in the
middle and certain curly-bracket scenarios are handled. The test suite
reflects these improvements, resulting in a more seamless coding
experience overall.
### References:
- Mini.AI plugin in nvim: https://github.com/echasnovski/mini.ai
Thank you for reviewing these changes!
Release Notes:
- Improve logic of aq, iq, ab and ib motions to work more like mini.ai
plugin
Closes https://github.com/zed-industries/zed/issues/12471
- Disables "Close Others" if there's just one tab
- Disables "Close Left"/"Close Right" if the above is true or if there's
no tabs to the left/right side of the active tab
Release Notes:
- N/A
In Zed the key context almost always has more than 1 entry, so use of
`SmallVec` is just adding overhead.
In Zed while using the editor this typically has more than 8 entries.
Since `ContextEntry` is 48 bytes, if this were made to be a
`SmallVec<[ContextEntry; 10]>` then it would use 480 bytes on the stack,
which to me seems like a lot to be copying. So, instead opting to just
use `Vec`
Release Notes:
- N/A
Closes#12635
- [x] Get it working
- [x] Disable for multi cursor
- [x] Disable for vim visual line selection
- [x] Add setting to disable it
- [x] Add scrollbar marker
- [x] Handle delete state capturing selection
Preview:
https://github.com/user-attachments/assets/a76cde64-4f6c-4575-91cc-3a03a954e7a9
Release Notes:
- Added support to highlight all matching occurrences of text within the
selection in editor.
---------
Co-authored-by: Agus Zubiaga <agus@zed.dev>
Co-authored-by: Danilo <danilo@zed.dev>
Now, you can pass `show_scrollbar` to Picker that implement a
`uniform_list`. If that's on, the scrollbar should auto-hide if you move
your focus elsewhere. By default, this method is turned off.
Release Notes:
- N/A
---------
Co-authored-by: smit <0xtimsb@gmail.com>
If the user removes all modified keybinds in `edit_prediction_conflict`,
the preview bar above the completions menu would disappear. This PR
handles that case slightly better by still showing the 1-line preview
(which they might accept via an unmodified keybind) and hides the `|
Preview ⌥` section since it's impossible to invoke in this case.
Release Notes:
- Handle `edit_prediction_conflict` context without modified keybinds
for `AcceptEditPrediction`
Vim itself shows keybindings cased according to the character, and so
it's confusing for people coming from vim that we show all key-bindings
uppercase with an icon denoting shift (c.f. #14287).
So, in #24322 we changed Zed to use lowercase for bindings in vim mode.
Unfortunately this (in practice) looks awful because our key icons are
designed to be paired with uppercase letters.
Instead, we now (for vim mode) show the same syntax as would be used in
the keymap file for Zed. This is different from vim (i.e. we show
shift-z instead of Z, and cmd-d instead of <D-z>) but hopefully avoids
the original confusion, and as a bonus makes it easy to figure out the
syntax you need for a workspace::SendKeystrokes.
Closes #ISSUE
Release Notes:
- N/A *or* Added/Fixed/Improved ...
* Remove unneeded accepted licenses
* Removes use of `workarounds`
- `wasmtime` no longer needed in list
- `ring` now checks the license SHA
* Checks license from `files` instead of from `git`. Execution time ~17s
instead of ~24s
Release Notes:
- N/A
Closes#24744
and should also fix#17819
The change is split into two commits, first one adds F10 handling (it
needs to be handled inside `parse_syskeydown_msg_keystroke`, the second
one properly handles `Alt+Fn` combinations, this also needs to happen in
`parse_syskeydown_msg_keystroke` and is similar to a fragment inside
`parse_keydown_msg_keystroke`
Release Notes:
- Fixes F10 and Alt+Fn handling on windows
The name `livekit_server` was a bit misleading as it is not a server and
gets built into both the client and server - the server code is in
`collab`.
Release Notes:
- N/A
As of 0.4.0, the decryption panic that we were seeing has been fixed
upstream (thanks @bilelmoussaoui!), so stop using our temporary fork.
Release Notes:
- N/A
This PR uses the template merge message in `.git/MERGE_MSG` to populate
the commit message buffer in the git panel. This is done:
- when the commit message buffer is first created
- when the list of merge heads in .git changes, only if the buffer
doesn't already have some text in it
Hopefully this strikes a good balance between convenience and not
stomping on the user's toes.
Release Notes:
- N/A
This Pull Request tackles the issue outline in #14287 by changing the
way `KeyBinding`s for vim mode are displayed in the command palette.
It's worth pointing out that this whole thing was pretty much
implemented by Conrad Irwin during a pairing session, I just tried to
clean up some other changes introduced for a different issue, while
improving some comments.
Here's a quick list of the changes introduced:
- Update `KeyBinding` with a new `vim_mode` field to determine whether
the keybinding should be displayed in vim mode.
- Update the way `KeyBinding` is rendered, so as to detect if the
keybinding is for vim mode, if it is, only display keys in uppercase if
they require the shift key.
- Introduce a new global state – `VimStyle(bool)` - use to determine
whether `vim_mode` should be enabled or disabled when creating a new
`KeyBinding` struct. This global state is automatically set by the `vim`
crate whenever vim mode is enabled or disabled.
- Since the app's context is now required when building a `KeyBinding` ,
update a lot of callers to correctly pass this context.
And before and after screenshots, for comparison:
| before | after |
|--------|-------|
| <img width="1050" alt="SCR-20250205-tyeq"
src="https://github.com/user-attachments/assets/e577206d-2a3d-4e06-a96f-a98899cc15c0"
/> | <img width="1050" alt="SCR-20250205-tylh"
src="https://github.com/user-attachments/assets/ebbf70a9-e838-4d32-aee5-0ffde94d65fb"
/> |
Closes#14287
Release Notes:
- Fix rendering of vim commands to preserve case sensitivity
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
.RData is a file that stores R objects.
Release Notes:
- Added file icon associations for `.rdata` and `.RData` files.
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
This PR adds the ability for icon themes to provide their own file
associations.
The old `file_types.json` that was previously used to make these
associations has been removed in favor of storing them on the default
theme.
Icon themes have two new fields on them:
- `file_stems`: A mapping of file stems to icon keys.
- `file_suffixes`: A mapping of file suffixes to icon keys.
These mappings produce icon keys which can then be used in `file_icons`
to associate them to a particular icon:
```json
{
"file_stems": {
"Makefile": "make"
},
"file_suffixes": {
"idr": "idris"
},
"file_icons": {
"idris": { "path": "./icons/idris.svg" },
"make": { "path": "./icons/make.svg" }
}
}
```
When loading an icon theme, the `file_stems` and `file_icons` fields
will be merged with the ones from the base icon theme, with the values
from the icon theme being loaded overriding ones in the base theme.
Release Notes:
- Added the ability for icon themes to provide their own file
associations.
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [rustls](https://redirect.github.com/rustls/rustls) |
workspace.dependencies | patch | `0.23.22` -> `0.23.23` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [x] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xNjcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjE2Ny4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [filedescriptor](https://redirect.github.com/wezterm/wezterm) |
dependencies | patch | `0.8.2` -> `0.8.3` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xNjcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjE2Ny4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [jsonwebtoken](https://redirect.github.com/Keats/jsonwebtoken) |
workspace.dependencies | patch | `9.3.0` -> `9.3.1` |
---
### Release Notes
<details>
<summary>Keats/jsonwebtoken (jsonwebtoken)</summary>
###
[`v9.3.1`](https://redirect.github.com/Keats/jsonwebtoken/blob/HEAD/CHANGELOG.md#931-2024-02-06)
[Compare
Source](https://redirect.github.com/Keats/jsonwebtoken/compare/v9.3.0...v9.3.1)
- Update base64
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xNjcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjE2Ny4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
|
[tree-sitter-elixir](https://redirect.github.com/elixir-lang/tree-sitter-elixir)
| workspace.dependencies | patch | `0.3.3` -> `0.3.4` |
---
### Release Notes
<details>
<summary>elixir-lang/tree-sitter-elixir (tree-sitter-elixir)</summary>
###
[`v0.3.4`](https://redirect.github.com/elixir-lang/tree-sitter-elixir/blob/HEAD/CHANGELOG.md#v034-2025-02-06)
[Compare
Source](https://redirect.github.com/elixir-lang/tree-sitter-elixir/compare/v0.3.3...v0.3.4)
##### Changed
- Changed the built-in queries to use `#any-of?` predicate over
`#match?`
([#​80](https://redirect.github.com/elixir-lang/tree-sitter-elixir/pull/80))
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xNjcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjE2Ny4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [aws-sdk-kinesis](https://redirect.github.com/awslabs/aws-sdk-rust) |
dependencies | minor | `1.60.0` -> `1.61.0` |
| [aws-sdk-s3](https://redirect.github.com/awslabs/aws-sdk-rust) |
dependencies | minor | `1.73.0` -> `1.76.0` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
👻 **Immortal**: This PR will be recreated if closed unmerged. Get
[config
help](https://redirect.github.com/renovatebot/renovate/discussions) if
that's undesired.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xNjcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjE2Ny4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [clap](https://redirect.github.com/clap-rs/clap) |
workspace.dependencies | patch | `4.5.28` -> `4.5.29` |
---
### Release Notes
<details>
<summary>clap-rs/clap (clap)</summary>
###
[`v4.5.29`](https://redirect.github.com/clap-rs/clap/blob/HEAD/CHANGELOG.md#4529---2025-02-11)
[Compare
Source](https://redirect.github.com/clap-rs/clap/compare/v4.5.28...v4.5.29)
##### Fixes
- Change `ArgMatches::args_present` so not-present flags are considered
not-present (matching the documentation)
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xNjcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjE2Ny4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [ctor](https://redirect.github.com/mmastrac/rust-ctor) |
workspace.dependencies | minor | `0.2.6` -> `0.3.0` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xNjcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjE2Ny4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR removes Zed legacy themes – all themes except `One` and
`Gruvbox`.
These will likely be renamed in the future (to something like `Zed One`,
`Zed Gruvbox` to allow the original authors of those themes to provide
their own official versions.)
You can grab the
[`zed-legacy-themes`](https://github.com/zed-extensions/legacy-themes)
extension if you would like to continue using one of these themes.
## How to install the extension:
- Go to the extension store (`zed: extensions`, cmd+shift+x on macOS)
- Search for the `Zed Legacy Themes` extension and install it.
- Now the themes will be installed (with names like `Zed Legacy:
Andromeda`)
Release Notes:
- A number of themes are no longer installed in Zed by default:
`Andromeda`, `Atelier`, `Rosé Pine`, `Sandcastle`, `Solarized` &
`Summercamp`. If you would like to continue using one of these
extensions: 1. Open `zed: extensions`, 2. Install the
`zed-legacy-themes` extension. 3. Re-select your desired theme.
Co-authored-by: maxdeviant <elliott.codes@gmail.com>
This PR sorts the `file_types.json` file alphabetically.
This is the command I used to sort it:
```
pnpm --package=json-sort-cli dlx jsonsort assets/icons/file_icons/file_types.json
```
Release Notes:
- N/A
Adds the non-entry specific right click menu to the panel, and the
features contained therin:
* Stage all
* Discard Tracked Changes
* Trash Untracked Files
Also changes the naming from "Changes"/"New" to better match Git's
terminology (though not convinced on this, it was awkward to describe
"Discard Changes" without a way to distinguish between the changes and
the files containing them).
Release Notes:
- N/A
Follow-up of https://github.com/zed-industries/zed/pull/24857
Based on the feedback,
* made non-persisting font size change as a default in Zed keymaps
JetBrains IDEs seem to persist font size changes by default, hence left
to do so in Zed keymaps too
* fixed a bug with holding a binding to change the font size caused
flickering
Release Notes:
- N/A
Closes#24832
Only turns specified deperecated keys and values to snake case.
Release Notes:
- Fixed issue where keybindings would open task selector instead of
spawn that task.
Closes#14497
Release Notes:
- Fixed outline view for Go to correctly indent types and show missing
variables.
----
This PR fixes the tree-sitter query for outlines for Go code. It
correctly indents "grouped" `type` declarations. It also fixes missing
variables for "grouped" `var` declarations.
### Before:
1. Incorrectly indented types from `G` to `K` and `aliasInt`
2. Missing vars `M` and `N` in outline
### After:
1. Types no longer indented incorrectly
2. Missing vars `M` and `N` appear in the outline, as expected
### Caveats:
1. This fix comes from an hour or so of reading about tree-sitter and
its query syntax. I'm not an expert.
2. I'm not sure how to test this. I've done manual testing and it
appears to works as expected without an regressions.
This Pull Request fixes an issue where selecting all matches on a search
would not update vim to visual mode.
In the video below the following scenarios are tested:
1. Clicking "Select All Matches" in the buffer search bar correctly
changes vim to visual mode
2. Pressing Enter jumps the cursor to the first match and does not
change vim's mode
3. Selecting all matches with the `⌥⏎` changes vim to visual mode
https://github.com/user-attachments/assets/f7535638-987e-4f33-9364-292f99b60167
Thanks @ConradIrwin for both the quick pairing session and the solution!
🙇Closes#14681
Release Notes:
- vim: Use visual mode for "select all matches" in search (to be
consistent with `ga`)
This PR fixes the issue response script.
There were a number of things preventing it from working:
- The directory name used in the GitHub Action did not match the one on
disk.
- The script has been moved accordingly
- `ts-node` does not support ESM.
- `ts-node` seems unmaintained, so I changed the script to be plain JS
that is type-checked with TypeScript.
- The data being sent to the Slack API was invalid:
- Each section block can only have a maximum of 3000 characters in the
`text` field, so we need to break up the issue list across multiple
sections.
- We needed to escape `&`, `<`, and `>` characters in the issue titles.
Release Notes:
- N/A
This is just a temporary change to help us debug with some weird issues
happening:
- Discord release not firing for certain builds
- Random blank release drafts showing up
Release Notes:
- N/A
Closes#22666
This PR fixes the long wait time to open Zed (2 mins in my case) after
reloading on Linux.
This bug fix is funny:
1. We were using TCP for Zed instances to talk to each other. Reload was
broken here too due to TCP connections not being killed on time.
2. [#11488](https://github.com/zed-industries/zed/pull/11488) PR fixed
the TCP connection issue by adding a wait until it gets killed. I
suppose at that time, this wait time was small.
3. Later, we changed how Zed talks to each other in
[#11585](https://github.com/zed-industries/zed/pull/11585) by using
Datagram and removing TCP. The new approach simply uses a `.sock` file
and a file descriptor to check if some program is listening to it.
4. TCP check is now unnecessary, and it still wait for a long time (I
suppose, TIME_WAIT time, don't quote me on this), even though we don’t
use TCP anymore for this.
This PR just removes that unnecessary TCP wait.
Release Notes:
- Fixed issue where reload hangs for several minutes on Linux.
cc @iamnbutler
Release Notes:
- Color gutter highlights separately for removed and deleted portions of
git modification hunks
Co-authored-by: Conrad <conrad@zed.dev>
Follow-up of https://github.com/zed-industries/zed/pull/24307
Brings back the PR and fixes the issue with the git status not
propagated, if computed too slow.
Now, git repo update
* waits in the background for all `scan_dir` repo status updates and
triggers another status update send afterwards
* ensures that the update sent is reported correctly (`scanning = true`)
if either FS or status scan is running still
* during worktree's git statuses updates, bumps `status_scan_id` to
ensure the repo update is reported to all subscribers
Release Notes:
- Improved project panel's speed in large projects
Release Notes:
- Fixed a panic when displaying a whitespace-only line in the edit
prediction preview
---------
Co-authored-by: Antonio <antonio@zed.dev>
We were disabling edit predictions altogether when
`show_edit_predictions` was set to `false`. However, even in that case,
`editor::ShowEditPrediction` is supposed to let your request a
prediction manually.
Release Notes:
- Fixed `editor::ShowEditPrediction` when `show_edit_predictions` is set
to `false`.
Closes https://github.com/zed-industries/zed/issues/23505
Now `zed::IncreaseBufferFontSize` (and all the same UI- and
Buffer-related settings) action is parameterized with `{ "persist": true
}` (default).
Using `"persist": false` brings back resizing behavior prior to
https://github.com/zed-industries/zed/pull/23265
Release Notes:
- Added a way to toggle font size without settings adjustments
This PR adds `.dev.vars` files as a default exclusion for edit
prediction.
These files are used by Cloudflare Workers and are likely to contain
secrets.
Release Notes:
- Excluded Cloudflare Workers `.dev.vars` files from edit prediction.
I spent an hour with @marcospb19 this morning debugging an issue with
adding `Copy Path` and `Copy Relative Path` actions to the editor
context menu. Turned out that the problem was using
`workspace::CopyPath` in the menu and `editor::CopyPath` in the action
handler.
This is an easy mistake to make, so let's fix it for everyone.
Release Notes:
- N/A
This PR removes the `predict-edits-launch` feature flag that was added
in #24720.
We don't need this anymore now that we've launched!
Release Notes:
- N/A
Supercedes #24561Closes#21059
Before this change we would skip saving multibuffers regardless of the
save intent. Now we correctly save them.
Along the way:
* Prompt to save when closing the last singleton copy of an item (even
if it's still open in a multibuffer).
* Update our file name prompt to pull out dirty project items from
multibuffers instead of counting multibuffers as untitled files.
* Fix our prompt test helpers to require passing the button name instead
of the index. A few tests were passing invalid responses to save
prompts.
* Refactor the code a bit to hopefully clarify it for the next bug.
Release Notes:
- Fixed edge-cases when closing multiple items including multibuffers.
Previously no prompt was generated when closing an item that was open in
a multibuffer, now you will be prompted.
- vim: Fix :wq in a multibuffer
`refs/heads/*` doesn't match e.g. `refs/heads/cole/branch-with-slash`
(thanks fnmatch), but `refs/heads/**/*` does. This also works for
several levels of slash.
Release Notes:
- N/A
The MultiWrite struct is defined in the function scope and is allowed to
have a concrete type, which means we can throw away the extra Box.
PathBuf::exists is known to be prone to invalid usage. It doesn't take
into account permissions errors and just returns false, additionally it
introduces a time-of-check time-of-use bug. While extremely unlikely,
why not fix it anyway.
Release Notes:
- remove unnecessary Box
- prevent time-of-check time-of-use bug
This fixes a bug where we'd update your settings to an invalid state if
you were using the old `inline_completion_provider` setting, then
onboarded to Zeta, then migrated your settings.
Release Notes:
- N/A
Co-authored-by: Michael Sloan <mgsloan@gmail.com>
Co-authored-by: Agus Zubiaga <hi@aguz.me>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
|
[cloudflare/wrangler-action](https://redirect.github.com/cloudflare/wrangler-action)
| action | digest | `7a5f8bb` -> `392082e` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xNjcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjE2Ny4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR updates the blog post link in the onboarding modal to be behind
the `predict-edits-launch` feature flag instead of a staff flag.
This will allow us to enable the blog post link once we're live.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
This PR makes it so Zeta respects the `x-zed-minimum-required-version`
header sent back from the server.
If the current Zed version is strictly less than the indicated minimum
required version, we show an error indicating that an update is required
in order to continue using Zeta:
<img width="472" alt="Screenshot 2025-02-12 at 6 15 44 PM"
src="https://github.com/user-attachments/assets/51b85dff-23a0-464c-ae4b-5b8f46b5915c"
/>
Release Notes:
- N/A
This PR fixes autoscroll flickering issue caused by recent
[#24735](https://github.com/zed-industries/zed/pull/24735) which fixes
soft wrap scroll issues. No release notes, as this was few hours ago.
Adding vertical scrollbar width to viewport width, so that autoscroll
function don't try to that much pixels extra.
Release Notes:
- N/A
Closes#10232
Context:
We have three ways to open files or dirs in Zed: `zed`, `zed --new`, and
`zed --add`. `--new` forces the project to open in a new window, while
`--add` forces it to open in an existing window (even if the dir isn’t a
subdir of an existing project or the file isn’t part of it).
Using just `zed` tries to open it in an existing window based on similar
logic of `--add`, but if no related project is found the dir, opens in a
new window.
Problem:
Right now, subdirs that are part of an existing project open in the
existing window when using `zed`. By default, subdirs should open in a
new window instead. If someone wants to open it in the existing window,
they can explicitly use `--add`. After this PR, only root dir and files
will focus on existing window, when `zed ` is used.
Fix:
For the `zed` case, we’ve filtered out subdirs in the logic that assigns
them to an existing window.
Release Notes:
- Fixed an issue where subdirectories of an already opened project, when
opened via the terminal, would open in the existing project instead of a
new window.
- [x] Staging hunks
- [x] Unstaging hunks
- [x] Write a randomized test
- [x] Get test passing
- [x] Fix existing bug in diff_base_byte_range computation
- [x] Remote project support
- [ ] ~~Improve performance of
buffer_range_to_unchanged_diff_base_range~~
- [ ] ~~Bug: project diff editor scrolls to top when staging/unstaging
hunk~~ existing issue
- [ ] ~~UI~~ deferred
- [x] Tricky cases
- [x] Correctly handle acting on multiple hunks for a single file
- [x] Remove path from index when unstaging the last staged hunk, if
it's absent from HEAD, or staging the only hunk, if it's deleted in the
working copy
Release Notes:
- Add `ToggleStagedSelectedDiffHunks` action for staging and unstaging
individual diff hunks
Closes#22252
This PR fixes the bug introduced in
https://github.com/zed-industries/zed/pull/19495 by:
Problem:
The vertical scrollbar is currently rendered absolutely on top of the
editor. When calculating soft wrap, the editor uses its width to decide
how many words fit on a line. This causes words to overlap with the
vertical scrollbar because it doesn't account for the scrollbar's width.
To fix the overlap, extra overflow is added to the scrollbar, which
solves the issue but creates unnecessary scrolling in soft wrap mode.
Fix:
The editor width is adjusted to account for the scrollbar's width. This
makes sure the correct number of words fit on a line and prevents
overlapping with the scrollbar in soft wrap mode.
Since the scrollbar width is now accounted for in the editor's width,
there's no need to add extra overflow, unless there’s no soft wrap. In
that case, when text overflows the editor’s width, we still need to add
extra overscroll to match the scrollbar width. Without this, long lines
will overlap with the scrollbar.
Release Notes:
- Fixed issue where horizontal scrollbar would scroll few characters
width when soft wrap is active.
This PR puts the "Eager Preview Mode" menu entry behind a feature flag
rather than a staff flag.
Currently it defaults to `false` for staff so that it doesn't leak into
any marketing/launch materials.
Folks who want to see it can opt-in to the flag explicitly, for now.
Release Notes:
- N/A
closes https://github.com/zed-industries/zed/issues/19620.
I am not 100% sure on how to test this though. @elithrar: would you mind
giving this branch a shot and seeing if it works for you? I kicked off
bundling for this pull request and you should be able to download a DMG
from the CI artifacts as soon as it's done building.
Release Notes:
- Fixed a bug that caused OS-level CA certificate bundles to not be
respected.
---------
Co-authored-by: Bennet <bennet@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
This PR updates the file icon mappings such that:
- C# (`.cs`) files map to the `csharp` key
- Cue (`.cue`) files map to the `cue` key
- GitLab YAML (`gitlab-ci.yml`) files map to the `gitlab` key
- Luau (`.luau`) files map to the `luau` key
- Solidity (`.sol`) files map to the `solidity` key
Release Notes:
- Icon themes: Added the ability to change the file icon for C# (`.cs`)
files.
- Icon themes: Added the ability to change the file icon for Cue
(`.cue`) files.
- Icon themes: Added the ability to change the file icon for GitLab YAML
(`gitlab-ci.yml`) files.
- Icon themes: Added the ability to change the file icon for Luau
(`.luau`) files.
- Icon themes: Added the ability to change the file icon for Solidity
(`.sol`) files.
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Rationale for the changes:
* `requires migration` -> `uses some deprecated settings` changed
because really it isn't required by this version of Zed, and I believe
we hope to offer support for deprecated settings and their migration for
a long time.
* Rename of `migration` -> `updated` is because to me, "updated" feels
lighter and more accurate. To me migration has connotations of moving to
a whole new format.
Formatting changes are due to shortening the line causing cargo fmt to
go from not formatting the code to doing so.
Release Notes:
- N/A
---------
Co-authored-by: smit <0xtimsb@gmail.com>
This PR adds:
- Support for deprecated keymap and settings (In-memory migration)
- Migration prompt only shown in `settings.json` / `keymap.json`.
Release Notes:
- The migration banner will only appear in `settings.json` and
`keymap.json` if you have deprecated settings or keybindings, allowing
you to migrate them to work with the new version on Zed.
Moves tab whitespace insertion logic out of `AcceptEditPrediction`
handler.
`edit_prediction_requires_modifier` context will now be true when on a
line with leading whitespace, so that `alt-tab` is used to accept
predictions in this case. This way leading indentation can be typed when
edit predictions are visible
Release Notes:
- N/A
Co-authored-by: Ben <ben@zed.dev>
Co-authored-by: Joao <joao@zed.dev>
This PR adds support for configuring both a light and dark icon theme in
`settings.json`.
In addition to accepting just an icon theme name, the `icon_theme` field
now also accepts an object in the following form:
```jsonc
{
"icon_theme": {
"mode": "system",
"light": "Zed (Default)",
"dark": "Zed (Default)"
}
}
```
Both `light` and `dark` are required, and indicate which icon theme
should be used when the system is in light mode and dark mode,
respectively.
The `mode` field is optional and indicates which icon theme should be
used:
- `"system"` - Use the icon theme that corresponds to the system's
appearance.
- `"light"` - Use the icon theme indicated by the `light` field.
- `"dark"` - Use the icon theme indicated by the `dark` field.
Closes https://github.com/zed-industries/zed/issues/24695.
Release Notes:
- Added support for configuring both a light and dark icon theme and
switching between them based on system preference.
Don't animate the cursor when previewing jumps.
Instead, display the jump popover with a line that resembles a cursor,
indicating the jump destination. If the jump destination is outside of
the view port, there is an extra step in which `tab` scrolls the
viewport to reveal the jump destination.
Release Notes:
- N/A
---------
Co-authored-by: danilo-leal <daniloleal09@gmail.com>
Co-authored-by: agu-z <hi@aguz.me>
In an effort to squash bugs like:
https://github.com/zed-industries/zed/issues/19620, and improve
confidence on PRs like:
https://github.com/zed-industries/zed/pull/24656, I created this little
test script using `mitmproxy` to simulate the situation.
Unfortunately, I don't see any issues with our current usage of the
local certificate store using this script. But I'd like to have it as a
base to build off of.
Release Notes:
- N/A
Re-lands https://github.com/zed-industries/zed/pull/24446 with a more
appropriate fix
https://github.com/user-attachments/assets/45f665f0-473a-49bd-b013-b9d1bdb902bd
After activating 2nd diagnostics group, `find_map` code for next
diagnostics did not skip the previous group for the same place.
This time, instead of fiddling with the diagnostics group comparison,
the code splits the diagnostics by search place, looks up the active
group (if any) in both split parts, and selects the entries after the
group elements.
Release Notes:
- Fixed `editor::GoToDiagnostics` action stuck when multiple diagnostics
groups belong to the same place
This PR updates the `GET /user` endpoint to update the user's email and
name from the provided GitHub profile information on sign-in.
Currently, these fields were only set when the user was first created.
Release Notes:
- N/A
This PR does some clean up for the edit predictions settings:
- Removed `editor.show_edit_predictions_in_menu`
- Renamed `edit_predictions.inline_preview` to `edit_predictions.mode`
Release Notes:
- N/A
---------
Co-authored-by: Agus Zubiaga <agus@zed.dev>
This PR adds the ability to change the predict edits URL using the
`ZED_PREDICT_EDITS_URL` environment variable.
This allows for easily pointing Zed to a development version of the
Cloudflare Worker.
Release Notes:
- N/A
The `.mjsx`, `.cjsx`, `.mtsx`, and `.ctsx` file extensions are also
designed to contain JSX code.
Release Notes:
- Added file icon associations for more React files (`.mjsx`, `.cjsx`,
`.mtsx`, `.ctsx`).
Closes#21967
Add actions `CopyFileName` and `CopyFileNameWithoutExtension` to be used in the command palette.
Release Notes:
- Added commands `editor: copy file name` and `editor: copy file name without extensions`.
We've seen a few crashes in `SyntaxSnapshot::reparse_with_ranges` during
`Buffer::preview_edits`, where an offset conversion fails because it is
out of range.
We are not sure how exactly this is happening.
Our theory is that the syntax snapshot is using an outdated state when
edits happen in the meantime (while interpolating). This is an attempt
to see if it helps with the panics, hopefully we can revisit this when
we have a better understanding of the issue.
Co-Authored-by: Antonio <antonio@zed.dev>
Release Notes:
- N/A
Co-authored-by: Antonio <antonio@zed.dev>
This PR updates the asset paths used in more GPUI examples such that
they work when run from the repository root or from within
`crates/gpui`.
Release Notes:
- N/A
This PR updates the file icon mappings such that Markdown (`.md`,
`.markdown`) files map to the `markdown` key.
Release Notes:
- Icon themes: Added the ability to change the file icon for Markdown
(`.md`, `.markdown`) files.
This PR updates the GPUI `image` example such that it works when run in
the following ways:
- `cargo run -p gpui --example image` from the repository root
- `cargo run --example image` from within `crates/gpui`
Release Notes:
- N/A
This PR updates the file icon mappings such that Svelte (`.svelte`)
files map to the `svelte` key.
Release Notes:
- Icon themes: Added the ability to change the file icon for Svelte
(`.svelte`) files.
All other vim examples are objects in Keymap file, where these two
examples are stated as Keymap file itself.
PR fixes this confusion.
Release Notes:
- N/A
Closes#21147
Release Notes:
- vim: First version of `:set` with support for `[no]wrap`,
`[no]number`, `[no]relativenumber`
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Release Notes:
- Render unstaged hunks in the project diff editor with a slashed
background
---------
Co-authored-by: maxbrunsfeld <max@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Was unnecessary to include these in #24596 as they will be available
from the base keymap.
Release Notes:
- N/A
Co-authored-by: Conrad <conrad@zed.dev>
* Overrides the action handler to switch to insert mode after jumps.
* Returns `vim::Tab` to its behavior from before #24418
Release Notes:
- N/A
Co-authored-by: Conrad <conrad@zed.dev>
* correct the size of key binding icons
* avoid spurious modifier in 'jump to edit' popover when already
previewing
* fix height of the edit preview popover
Release Notes:
- N/A
Co-authored-by: agu-z <hi@aguz.me>
Previously, if multiple formatters were specified for the same language,
they would be run in parallel on the state of the file, and then all
edits would be applied. This lead to incorrect output with many unwanted
artifacts.
This PR refactors the formatting code to clean it up, and ensure results
from previous formatters are passed in to subsequent formatters.
Closes#15544
Release Notes:
- Fixed an issue where when running multiple formatters they would be
ran in parallel rather than sequentially, leading to unwanted artifacts
and incorrect output.
---------
Co-authored-by: Conrad <conrad@zed.dev>
We were reading edit prediction settings too often, causing frames to be
dropped. We'll now cache them and update them from
`update_visible_inline_completion`.
Release Notes:
- N/A
When working on #24442, I did a project wide replacement of
`AcceptInlineCompletion` with `AcceptEditPrediction`, as I was updating
the branch to mmain and that rename had happened. This also replaced it
in the migrator, causing the migration notification to always pop up on
keymap changes.
Checking if the migration actually changes the text makes it behave
better if this variety of bug happens in the future.
Release Notes:
- N/A
I didn't update it to 0.25 because its Wasm support seems to be
partially broken due to
https://github.com/tree-sitter/tree-sitter/pull/3938: it didn't
introduce a check that the Wasm module's ABI is new enough to include
supertype info while parsing it, and so in the case where it isn't it
ends up interpreting random bytes as the number of supertypes, causing
out-of-bounds memory accesses.
Closes#24489
Release Notes:
- Fixed a rare crash during syntax highlighting
I was finding hard to navigate the "Configuring Zed" page with just
white space creating a boundary between the different chunks of content.
I think a slight border below the h2 heading helps a lot with that!
Release Notes:
- N/A
Previously, we were passing an `IconSize` that had a default size. Given
the check icon is small by default, when the entry is not toggled, that
caused a slight misalignment between the toggled and not-toggled items.
I'm passing now the same icon element but inside an opacity 0 div. Open
to other suggestions if this feels clunky.
| Before | After |
|--------|--------|
| <img width="946" alt="Screenshot 2025-02-10 at 7 58 28 AM"
src="https://github.com/user-attachments/assets/4d2b3f12-72c5-4c8d-acaf-c16230250560"
/> | <img width="943" alt="Screenshot 2025-02-10 at 7 58 37 AM"
src="https://github.com/user-attachments/assets/2df64752-7273-4bdc-9f6b-5153ed52c889"
/> |
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/23894
Reworks all trigger declarations from
`.trigger(element.tooltip(tooltip))` into
`.trigger_with_tooltip(element, tooltip)` , with new API disallowing
simultaneous trigger and tooltip display.
All existing `.trigger(` calls were replaced, except 2 not applicable
(in dock.rs and pane.rs), 15 left as ones without tooltips, and 2
unchanged places in `inline_completion_button.rs`, where
0f7bb2e9fd/crates/inline_completion_button/src/inline_completion_button.rs (L311-L319)
`with_animation` does not allow us to simply use the same approach.
Release Notes:
- Fixed hover tooltips appearing after related element is pressed
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Closes https://github.com/zed-industries/zed/issues/22993
Properly calculates depth and maintains worktree order, when displaying
multiple worktrees in the outline panel.
Release Notes:
- Fixed outline panel issues in a multi-worktree set-up
This PR formalizes design components with the Component and
ComponentPreview traits.
You can open the preview UI with `workspace: open component preview`.
Component previews no longer need to return `Self` allowing for more
complex previews, and previews of components like `ui::Tooltip` that
supplement other components rather than are rendered by default.
`cargo-machete` incorrectly identifies `linkme` as an unused dep on
crates that have components deriving `IntoComponent`, so you may need to
add this to that crate's `Cargo.toml`:
```toml
# cargo-machete doesn't understand that linkme is used in the component macro
[package.metadata.cargo-machete]
ignored = ["linkme"]
```
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
This PR pins Prettier to a specific version when we run the docs
formatting check.
This should prevent drift when new Prettier versions are released that
may impact the formatting.
Release Notes:
- N/A
Closes#22830
@jansol, please take a look. I don't know if this is correct as I
couldn't really tell the difference. I just added the active theme's
background color to the main container of the tree view.
<img width="1309" alt="Screenshot 2025-02-09 at 10 29 15 AM"
src="https://github.com/user-attachments/assets/dadf9333-0074-4bfa-bb06-ed4c4f275200"
/>
Release Notes:
- Added an explicit background color to the syntax tree view.
cc: @iamnbutler
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Closes#7923
This PR fixes root worktree renaming by:
1. Handling the case where `new_path` is the new root name instead of a
relative path from the root.
2. [#20313](https://github.com/zed-industries/zed/pull/20313) added
functionality to watch for root worktree renames made externally, e.g.,
via Finder. This PR avoids relying on that watcher because, when
renaming explicitly from Zed, we can eagerly perform the necessary work
(of course after fs rename) instead of waiting for the watcher to detect
the rename. This prevents UI glitches during renaming root.
Todo:
- [x] Fix wrong abs paths when root is renamed
- [x] Fix explicit scan entry func to handle renamed root dir
- [x] Tests
- [x] Test on Linux
- [x] Tested with single and multipe worktrees
- [x] Tested when single file is root file
Release Notes:
- Fixed an issue where worktree root name couldn't be renamed in project
panel.
Closes https://github.com/zed-industries/zed/issues/24128
* removed unnecessary debounces when updating the panel data
* removed all "loading"-related messages to snow nothing when initial
data is loaded, thus reducing flickering
Release Notes:
- Improved outline panel initial update
This PR adds icon association for more Prettier's config files.
Here is the list:
```
.prettierrc.cjs
.prettierrc.js
.prettierrc.json5
.prettierrc.mjs
.prettierrc.toml
.prettierrc.yaml
.prettierrc.yml
prettier.config.cjs
prettier.config.js
prettier.config.mjs
```
Release Notes:
- Added icon support for additional Prettier config file types.
This PR adds the branch selector to the git panel and fixes a few bugs
in the repository selector.
Release Notes:
- N/A
---------
Co-authored-by: ConradIrwin <conrad.irwin@gmail.com>
Co-authored-by: Conrad <conrad@zed.dev>
Closes#24382
Release Notes:
Added a default keymap that returns the user to `normal` mode after
pressing escape during a pending `visual-surround` operation.
- N/A
---------
Co-authored-by: roy.crippen4 <roy.crippen4@archarithms.com>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Added the icons option in the title bar between Themes and Extension.
| Before | After |
|
---------------------------------------------------------------------------------------------------------------------------------------------------
|
---------------------------------------------------------------------------------------------------------------------------------------------------
|
| <img width="215" alt="Screenshot 2025-02-07 at 5 18 10 PM"
src="https://github.com/user-attachments/assets/ff8bf5ce-c176-4d8c-8b0e-bb1cc65ec1d8"
/> | <img width="206" alt="Screenshot 2025-02-07 at 5 18 01 PM"
src="https://github.com/user-attachments/assets/c47a302e-98af-4530-a908-097b8306f2f0"
/> |
Release Notes:
- Added an option to open the icon theme selector from the user menu.
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
This PR updates the edit predictions to include the prediction ID
returned from the server on the resulting telemetry events indicating
whether the prediction was accepted or discarded.
The `prediction_id` on the events can then be correlated with the
`request_id` on the server-side prediction events.
Release Notes:
- N/A
This PR primary goal is to add a keybinding to the (ephemeral)
prediction toggle. In doing that, we also standardized the keybinding to
open the status bar menu with it.
Release Notes:
- N/A
---------
Co-authored-by: Bennet Bo Fenner <53836821+bennetbo@users.noreply.github.com>
Release Notes:
- N/A
As https://github.com/zed-industries/zed/discussions/24260 I mentioned
issue.
Make a complex data table example to test the text rendering
performance.
This example also can be an example to show how to build a large data
table.
```bash
cargo run -p gpui --example data_table
```
<img width="2004" alt="image"
src="https://github.com/user-attachments/assets/653771e5-ef08-4d76-97b9-90ea4b78be59"
/>
----
I will try to do some test.
For example: With a threshold for the hold number of caches in
`FrameCache`, and only when the threshold is greater than a certain
number, some caches are released, or when a certain time has passed. I
am not sure if this is feasible.
This example is added to help us to test.
In one of the recent changes to the edit predictions status bar menu, we
lost the red dot that is displayed when the user has Zed as the provider
but hasn't accepted terms of service. Note: All the checks were still in
place, just the visual indicator was missing.
Release Notes:
- N/A
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
This PR fixes an issue where the Assistant patch block was not being
rendered when using "Suggest Edits".
The issue was that the `BlockContext` already has a borrow of the
`Window`, so we can't use `update_in` to reborrow the window.
The fix is to reuse the existing `&mut Window` reference from the
`BlockContext` so we don't need to `update_in`.
Closes#24169.
Release Notes:
- Assistant: Fixed an issue where the patch block was not being rendered
when using "Suggest Edits".
---------
Co-authored-by: Max <max@zed.dev>
Closes#22247
- [x] Do not close pinned tab on keyboard shortcuts like `ctrl+w` or
`alt+f4`
- [x] Close pinned tab on context menu action, menu bar action, or vim
bang
- [x] While closing pinned tab via shortcut (where it won't close),
instead activate any other non-pinned tab in same pane
- [x] Else, if any other pane contains non-pinned tab, activate that
- [x] Tests
Co-authored-by: uncenter <47499684+uncenter@users.noreply.github.com>
Release Notes:
- Pinned tab now stay open when using close shortcuts, auto focuses to
any other non-pinned tab instead.
Closes#24353
This PR implements icon theme reload to ensure file icons are properly
updated whenever an icon theme extension is upgraded or uninstalled.
Currently, on both upgrade and uninstall of an icon theme extension the
file icons from the previously installed version will stay visibile and
will not be updated as shown in the linked issue. With this change, file
icons will properly be updated on extension upgrade or reinstall.
The code is primarily a copy for reloading the current color theme
adapted to work for icon themes. Happy for any feedback!
Release Notes:
- Fixed file icons not being properly updated upon icon theme upgrade or
uninstall.
Just tried installing a dev extension and kept getting "error: failed to install dev extension".
Turns out this was because I had rust installed via homebrew and not rust. Once I switched to rustup, it worked perfectly fine.
Release Notes:
- N/A
Match the behavior of OpenSyntaxTreeView logs and OpenLanguageServerLogs
Release Notes:
- Make `debug::OpenSyntaxTreeView` automatically open in split to the
right
Add support for the newly released Gemini 2.0 models from Google announced this new family of models earlier this week (2025-02-05).
Release Notes:
- Added support for Google's new Gemini 2.0 models.
This PR updates the file icon mappings for JSON (`.json`) file map to
the`json` key. Also, updates `.json` icon from `storage` to `code`.
This allows for the JSON file icons to be replaced in icon themes.
Release Notes:
- Icon themes: Added the ability to change the file icon for JSON
(`.json`) files.
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
- [x] snake case keymap properties
- [x] flatten actions
- [x] keymap migration + notfication
- [x] settings migration + notification
- [x] inline completions -> edit predictions
### future:
- keymap notification doesn't show up on start up, only on keymap save.
this is existing bug in zed, will be addressed in seperate PR.
Release Notes:
- Added a notification for deprecated settings and keymaps, allowing you
to migrate them with a single click. A backup of your existing keymap
and settings will be created in your home directory.
- Modified some keymap actions and settings for consistency.
---------
Co-authored-by: Piotr Osiewicz <piotr@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
https://github.com/user-attachments/assets/45f665f0-473a-49bd-b013-b9d1bdb902bd
After activating 2nd diagnostics group, `find_map` code for next
diagnostics did not skip the previous group for the same place.
Release Notes:
- Fixed `editor::GoToDiagnostics` action stuck when multiple diagnostics
groups belong to the same place
* When an edit prediction is present in non-insertion modes, hide it but
show `tab Jump to edit`.
* Removes discarding of edit predictions when going from insert mode to
normal mode, instead just hide them in non-insertion modes.
* Removes zeta-specific showing of predictions in normal mode. This
behavior was only happening in special cases anyway - where the discard
of completions wasn't happening due to some other thing taking
precedence in `dismiss_menus_and_popups`.
Release Notes:
- N/A
---------
Co-authored-by: Conrad <conrad@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Git Panel updates:
* Fixes commit/commit all button to work (and be disabled correctly in
merge conflict status)
* Updates keyboard shortcuts and sets focus on the button (enter now
does the same as click; tab cycles between editor and change list)
Closes #ISSUE
Release Notes:
- N/A *or* Added/Fixed/Improved ...
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Closes#24139
For weird reasons, Sway on few linux distoros sends `NoKeymap` event when
switching windows. Zed crashes due to assertion on this event to be `XkbV1`.
To fix this, we ignore `NoKeymap` event instead crashing Zed.
Release Notes:
- Fixed a crash in Wayland-based compositors like Sway when switching windows via the keyboard.
`use_key_equivalents` does nothing on linux, as key equivalents are only
supported on mac. While it could be sensible to anticipate support,
right now it is only used in these few spots, so removing it.
Release Notes:
- N/A
## Context
I noticed that the project panel `select_next_git_entry` wasn't behaving
correctly. Turns out it was searching in reverse, which caused the
action to select itself or the last entry.
This PR corrects the behavior and adds a unit test that should stop
regressions.
Note: Since select next/prev git entry uses the same function as select
next/prev diagnostic, the test partially works for that as well.
Release Notes:
- Fix bug where `select_next_git_entry` project panel action would only
select a previous entry or the currently selected entry.
---------
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
Appears this test was failing, and someone edited the expected test
output instead of fixing it. Well no longer!
Release Notes:
- N/A
Co-authored-by: Conrad <conrad@zed.dev>
- Fixed a regex for finding tags.
- Templatize the instructions with `$LANGNAME` to prevent manual errors
from failing to edit commands (this bit me)
- Ran formatting through Prettier
Closes#24270
Release Notes:
- Fixed an issue where doing line-wise operations in vim mode on the
last line of a file with no trailing newline would not work properly
This is a refactoring PR that does three things:
- First, it introduces a new `diff` crate that holds the previous
contents of the `git::diff` module, plus the `BufferChangeSet` type
formerly of `project::buffer_store`. The new crate is necessary since
simply moving `BufferChangeSet` into `git::diff` results in a dependency
cycle due to the use of `language::Buffer` to represent the diff base in
`BufferChangeSet`.
- Second, it renames the two main types in the new diff crate:
`BufferDiff` becomes `BufferDiffSnapshot`, and `BufferChangeSet` becomes
`BufferDiff`. This reflects that the relationship between these two
types (immutable cheaply-cloneable "value" type + stateful "resource
type" with subscriptions) mirrors existing pairs like
`Buffer`/`BufferSnapshot`. References to "change sets" throughout the
codebase are updated to refer to "diffs" instead.
- Finally, it moves the base_text field of the new BufferDiff type to
BufferDiffSnapshot.
Release Notes:
- N/A
---------
Co-authored-by: maxbrunsfeld <max@zed.dev>
Follow-up to #24391
The current approach has two issues:
- For the described case of `eslint.config.js`, for which a mapping
exists in `suffixes`, this would get mapped from `eslint.config.js` to
`eslint`. However, for `eslint`, there is no mapping within `suffixes`,
thus currently `get_icon_from_suffix` would return `None` and a wrong
item would be returned at a later step.
- Paths passed to this method are relative to the worktree root, thus
e.g. `eslint.config.js` files in subdirectories would still be assigned
the wrong icon.
---
Behaviour on `main`:
<img width="281" alt="main"
src="https://github.com/user-attachments/assets/19b5e5f8-e413-4ac9-a0a1-2c72f810aa86"
/>
Behaviour with this change:
<img width="299" alt="pr"
src="https://github.com/user-attachments/assets/eec70cbd-df39-49b4-8b07-d22afa949781"
/>
CC @probably-neb
Release Notes:
- N/A
- **fix ignoring ignored files when matching icons**
- **remove poorly named and confusing method
`PathExt.icon_stem_or_suffix` and refactor
`PathExt.extension_or_hidden_file_name` to actually do what it says it
does**
Closes#24314
Release Notes:
- Fixed an issue where hidden files would have the default icon instead
of the correct one
- Fixed an issue where files with specific icons (such as
`eslint.config.js`) would not have the their specific icon without a
leading `.` (`.eslint.config.js`)
This PR makes it so we send up the diagnostic groups as additional data
with the edit prediction request.
We're not yet making use of them, but we are recording them so we can
use them later (e.g., to train the model).
Release Notes:
- N/A
---------
Co-authored-by: Nathan <nathan@zed.dev>
- Do not accept with just `tab` in `when_holding_modifer` mode
- Fix fake cursor for jumps when destination row is outside viewport
- Use current preview state for deciding whether to show modifiers in
popovers
- Stay in preview state if ⌥ isn't released after accepting a jump
Release Notes:
- N/A
This PR adds a new `inline_completions.inline_preview` config which can
be set to `auto` (current behavior) or to `when_holding_modifier`.
When set to the latter, instead of showing edit prediction previews
inline in the buffer, we'll show it in a popover (even when there's no
LSP completion) so your isn't constantly moving as completions arrive.
https://github.com/user-attachments/assets/3615d151-3633-4ee4-98b9-66ee0aa735b8
Release Notes:
- N/A
---------
Co-authored-by: Danilo <danilo@zed.dev>
Byte size before was 672, now is 56. The `cached` method is only used in
two places, so this was a lot of extra bytes being shuffled around for
every `AnyView` not using this.
Release Notes:
- N/A
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [rustc-hash](https://redirect.github.com/rust-lang/rustc-hash) |
workspace.dependencies | patch | `2.1.0` -> `2.1.1` |
---
### Release Notes
<details>
<summary>rust-lang/rustc-hash (rustc-hash)</summary>
###
[`v2.1.1`](https://redirect.github.com/rust-lang/rustc-hash/blob/HEAD/CHANGELOG.md#211)
[Compare
Source](https://redirect.github.com/rust-lang/rustc-hash/compare/v2.1.0...v2.1.1)
- Change the internal algorithm to better accomodate large hashmaps.
This mitigates a [regression with 2.0 in
rustc](https://redirect.github.com/rust-lang/rust/issues/135477).
See [PR#55](https://redirect.github.com/rust-lang/rustc-hash/pull/55)
for more details on the change (this PR was not merged).
This problem might be improved with changes to hashbrown in the future.
#### 2.1.0
- Implement `Clone` for `FxRandomState`
- Implement `Clone` for `FxSeededState`
- Use SPDX license expression in license field
#### 2.0.0
- Replace hash with faster and better finalized hash.
This replaces the previous "fxhash" algorithm originating in Firefox
with a custom hasher designed and implemented by Orson Peters
([`@orlp`](https://redirect.github.com/orlp)).
It was measured to have slightly better performance for rustc, has
better theoretical properties
and also includes a significantly better string hasher.
- Fix `no_std` builds
#### 1.2.0 (**YANKED**)
**Note: This version has been yanked due to issues with the `no_std`
feature!**
- Add a `FxBuildHasher` unit struct
- Improve documentation
- Add seed API for supplying custom seeds other than 0
- Add `FxRandomState` based on `rand` (behind the `rand` feature) for
random seeds
- Make many functions `const fn`
- Implement `Clone` for `FxHasher` struct
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xNDUuMCIsInVwZGF0ZWRJblZlciI6IjM5LjE0NS4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [derive_more](https://redirect.github.com/JelteF/derive_more) |
workspace.dependencies | patch | `0.99.18` -> `0.99.19` |
---
### Release Notes
<details>
<summary>JelteF/derive_more (derive_more)</summary>
###
[`v0.99.19`](https://redirect.github.com/JelteF/derive_more/blob/HEAD/CHANGELOG.md#09919---2025-02-03)
[Compare
Source](https://redirect.github.com/JelteF/derive_more/compare/v0.99.18...v0.99.19)
- Add crate metadata for the Rust Playground.
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xNDUuMCIsInVwZGF0ZWRJblZlciI6IjM5LjE0NS4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [toml](https://redirect.github.com/toml-rs/toml) |
workspace.dependencies | patch | `0.8.19` -> `0.8.20` |
---
### Release Notes
<details>
<summary>toml-rs/toml (toml)</summary>
###
[`v0.8.20`](https://redirect.github.com/toml-rs/toml/compare/toml-v0.8.19...toml-v0.8.20)
[Compare
Source](https://redirect.github.com/toml-rs/toml/compare/toml-v0.8.19...toml-v0.8.20)
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xNDUuMCIsInVwZGF0ZWRJblZlciI6IjM5LjE0NS4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
When Zed reopens after an auto-update is installed, a notification was
previously displayed in the first window opened. If there were multiple
windows open, the notification could be hidden because Zed reopens the
last session's window stack in order from back to front. Now, the
notification is opened in every workspace, and dismissing the
notification in any workspace will dismisses it everywhere.
Closes#23236
Release Notes:
- Improved notification after Zed is updated to be visible in all
workspaces.
---------
Co-authored-by: Michael Sloan <michael@zed.dev>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [aws-config](https://redirect.github.com/smithy-lang/smithy-rs) |
dependencies | patch | `1.5.15` -> `1.5.16` |
| [aws-sdk-kinesis](https://redirect.github.com/awslabs/aws-sdk-rust) |
dependencies | minor | `1.59.0` -> `1.60.0` |
| [aws-sdk-s3](https://redirect.github.com/awslabs/aws-sdk-rust) |
dependencies | minor | `1.72.0` -> `1.73.0` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
👻 **Immortal**: This PR will be recreated if closed unmerged. Get
[config
help](https://redirect.github.com/renovatebot/renovate/discussions) if
that's undesired.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xNDUuMCIsInVwZGF0ZWRJblZlciI6IjM5LjE0NS4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [wayland-cursor](https://redirect.github.com/smithay/wayland-rs) |
dependencies | patch | `0.31.7` -> `0.31.8` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xNDUuMCIsInVwZGF0ZWRJblZlciI6IjM5LjE0NS4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
- **store `buffer::Diagnostic`as NumberOrString instead of assuming
String**
- **update zed-industries/lsp-types rev**
Closes#24081
Release Notes:
- Fixed an issue where language server diagnostic codes would be converted to strings leading to errors with some language servers
Implement `raw_window_handle::HasWindowHandle` for `gpui::Window`
This opens a lot of possibility of using gpui with platform specific
APIs.
Edit: With this exposed, we can use crates like `window-vibrancy`,
`muda` (menus crate) or even use `wry` (a webview renderer) to create a
child `WebView` inside the gpui window.
Release Notes:
- N/A
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [zed_llm_client](https://crates.io/crates/zed_llm_client) |
workspace.dependencies | patch | `0.1.1` -> `0.1.2` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xNDUuMCIsInVwZGF0ZWRJblZlciI6IjM5LjE0NS4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR adds the general structure for filtering the extensions list by
what the extensions provide.
Currently flagged for Zed staff until we get some design direction on
how best to present the filter.
Release Notes:
- N/A
This PR updates the file icon mappings such that HTML (`.html` and
`.htm`) files map to the `html` key.
This allows for the HTML file icons to be replaced in icon themes.
Release Notes:
- Icon themes: Added the ability to change the file icon for HTML
(`.html`, `.htm`) files.
Regression in #22644
Unfortunately not a full fix, In the case where a tooltip gets displayed
and then gets occluded after display, it will stick around until the
mouse exits the hover bounds.
Release Notes:
- N/A
Co-authored-by: Ben <ben@zed.dev>
This PR adds the ability to filter extension results from the extension
API by the features that they provide.
For instance, to filter down just to extensions that provide icon
themes:
```
https://api.zed.dev/extensions?provides=icon-themes
```
Release Notes:
- N/A
* fix syntax highlighting of deleted text when buffer language changes
* do not highlight entire untracked files as created, except in the
project diff view
Release Notes:
- N/A
Co-authored-by: ConradIrwin <conrad.irwin@gmail.com>
Co-authored-by: cole-miller <m@cole-miller.net>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [async-trait](https://redirect.github.com/dtolnay/async-trait) |
workspace.dependencies | patch | `0.1.85` -> `0.1.86` |
---
### Release Notes
<details>
<summary>dtolnay/async-trait (async-trait)</summary>
###
[`v0.1.86`](https://redirect.github.com/dtolnay/async-trait/releases/tag/0.1.86)
[Compare
Source](https://redirect.github.com/dtolnay/async-trait/compare/0.1.85...0.1.86)
- Documentation improvements
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xNDUuMCIsInVwZGF0ZWRJblZlciI6IjM5LjE0NS4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [actions/setup-node](https://redirect.github.com/actions/setup-node) |
action | digest | `39370e3` -> `1d0ff46` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xNDUuMCIsInVwZGF0ZWRJblZlciI6IjM5LjE0NS4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR adds new columns to the `extension_versions` table to record
which features an extension provides.
These `provides_*` columns are populated from the `provides` field on
the extension manifest.
We'll be able to leverage this data in the future for showing what an
extension provides in the extensions UI, as well as allowing to filter
by extensions that provide a certain feature.
Release Notes:
- N/A
This PR removes the `name` field from under `lib` in the `Cargo.toml`
file for the `panel` crate, as it isn't necessary.
Also removed it from `script/new-crate`.
Release Notes:
- N/A
- Adds the `panel` crate for defining UI shared between panels, like
common button and header designs, etc
- Starts to update the git ui to be more consistent with other panels
Release Notes:
- N/A
This PR updates the Zed extension CLI with support for populating the
`provides` field in the generated extension manifest.
This field will contain the set of features that the extension provides.
For example:
```
"provides": ["themes", "icon-themes"]
```
Release Notes:
- N/A
This PR makes adding icons to the primary and secondary actions, in the
`MessageNotification` component, optional. Also took the opportunity to
remove a probably unnecessary "third action" from it; streamlining the
component API (we had added that for a design that we're not using
anymore). I did keep the "more info" possibility, which may be useful in
the future, though.
Release Notes:
- N/A
Follow-up to https://github.com/zed-industries/zed/pull/24278
This PR ensures we're checking if there's a license-type file in both US
& UK English spelling, and fixes the error logging again, treating for
when the worktree contains just a single file or multiple.
Release Notes:
- N/A
Co-authored-by: Bennet Bo Fenner <53836821+bennetbo@users.noreply.github.com>
Go back to a less optimized implementation for now since the custom
cursor target seems to have some bugs.
Release Notes:
- Fixed missing git blame and status output in some projects with
multiple git repositories
Rework of https://github.com/zed-industries/zed/pull/24130
Uses
1033c0b57e
`COMMIT_EDITMSG` language-related definitions (thanks @d1y )
Instead of using real `.git/COMMIT_EDITMSG` file, create a buffer
without FS representation, stored in the `Repository` and shared the
regular way via the `BufferStore`.
Adds a knowledge of what `Git Commit` language is, and uses it in the
buffers which are rendered in the git panel.
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad@zed.dev>
Co-authored-by: d1y <chenhonzhou@gmail.com>
Co-authored-by: Smit <smit@zed.dev>
When you have an edit prediction available, you can now also accept it
with `alt-tab` (or `alt-enter` on Linux) even if you don't have an LSP
completions menu open. This is meant to lower the mental load when going
from one mode to another.
Release Notes:
- N/A
- **Base diffs on uncommitted changes**
- **Show added files in project diff view**
- **Fix git panel optimism**
Release Notes:
- Git: update diffs to be relative to HEAD instead of the index; to pave
the way for showing which hunks are staged
---------
Co-authored-by: Cole <cole@zed.dev>
This is a pure refactor that somewhat reduces the amount of code needed
when handling diff base changes. There's also a small performance gain
from reparsing the staged text and computing a new diff in parallel when
we weren't previously.
Release Notes:
- N/A
Co-authored-by: Max <max@zed.dev>
This PR updates the check that prevents subscribing with overdue
subscriptions to use the `billing_customers.has_overdue_invoices` field
instead.
This will allow us to set the value of `has_overdue_invoices` to `false`
when the invoices have been paid.
Release Notes:
- N/A
This PR adds a new `has_overdue_invoices` field to the
`billing_customers` table.
This will be used to statefully track whether a customer has overdue
invoices, and also to reset it when the invoices are paid.
We will set this field to `true` when a subscription is canceled with
the reason `payment_failed`.
Release Notes:
- N/A
This PR updates the `zeta` crate to use the predictive edit DTOs defined
in the `zed_llm_client` crate.
This way we aren't duplicating their definitions (and risk them going
out of sync).
Release Notes:
- N/A
This PR renames some bindings from `data_collection_permission` back to
`can_collect_data`, as the latter name is clearer on account of being a
modal verb.
Release Notes:
- N/A
This is pretty rare but I found a case where `line_layouts` didn't have
the requested line yet, so we now skip rendering the cursor for that
period and avoid panicking.
Release Notes:
- N/A
This PR builds on #21258 to make it possible to use HEAD as a diff base.
The buffer store is extended to support holding multiple change sets,
and collab gains support for synchronizing the committed text of files
when any collaborator requires it.
Not implemented in this PR:
- Exposing the diff from HEAD to the user
- Decorating the diff from HEAD with information about which hunks are
staged
`test_random_multibuffer` now fails first at `SEED=13277`, similar to
the previous high-water mark, but with various bugs in the multibuffer
logic now shaken out.
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Ben <ben@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Conrad <conrad@zed.dev>
This long standing bug was caused by `Pane`'s focus_in handler bouncing
the focus to another handle.
Because focus resolution happens _after_ a frame has been rendered, the
only way to deal with this case is to schedule another frame to be
redrawn. However, we where suppressing all window refreshes that occur
during a focus transfer, causing this focus change to be completely
missed. However, changing this behavior can lead to infinite notify
loops, due to drawing a frame causing another to be rendered.
This PR fixes this problem narrowly by adding an `on_next_frame()`
callback in the pane's focus handle, so that the focus changes take
effect almost immediately. But only for this case, where we know it
doesn't cause infinite notify loops.
TODO:
- [x] Fix the infinite notify loop bug or determine a third way to fix
this lag
Release Notes:
- Fixed a bug where shifting focus to the terminal panel could be slow
Chatted with @as-cii about limitations in the `Window::parent_view_id()`
API (see:
662153dcfd)
and realized that I shouldn't be using the dispatch tree's data
structures as they are layout dependent. I've introduced a new stack to
`Window`, `rendered_entity_stack`, that tracks exactly which view's
elements are being drawn. As such, I've also been able to remove the
`Option<>` around the previous API.
Release Notes:
- N/A
Note that this does *not* involve any breaking code changes.
cc @0xtimsb - I didn't change any settings or anything here. That can
happen separately!
Release Notes:
- N/A
## Context
While looking through the client crate, I noticed that some of the old
functions and variables were still using gpui::model name that was
deprecated during the gpui3 transition. This PR renames those instances
of model to entity to be more inline with gpui3.
In addition, I also renamed `model` to `entity` in cases found by the
below search terms given by @someone13574
- model = cx.
- model: Entity
- model: &Entity
- OpenedModelHandle
- model.update
- model.upgrade
- model = .*\.root (regex)
- parent_model
- model = cx.new
- cx.spawn(move |model
Release Notes:
- N/A
This fixes a "subtract with overflow" error that could happen in debug
mode when viewing the project diagnostics.
From git bisecting, I think that this behavior was introduced by
https://github.com/zed-industries/zed/pull/21942. It seems like it's
possible in some cases for the excerpt-expansion heuristic to cause the
excerpt's `context` range to start *after* the excerpt's `primary`
range. We should probably revisit that heuristic at some point, but it
also seems reasonable to handle that situation at this layer, rather
than overflowing.
Release Notes:
- N/A
Also send the `speculated_output` (which is just the editable region) to
the llm backend
Closes #ISSUE
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Adds a button to the theme selector to help people find more themes in
the extension store.
Release Notes:
- Added a way to access the extension store from the theme selector to
make it easier to find new themes.
This reverts commit eb820ab800.
The previous PR broke manual completions. Turns out there is more
confusing behavior then i realized, will follow up with another PR soon.
Closes #ISSUE
Release Notes:
- N/A
Follow-up to: https://github.com/zed-industries/zed/pull/24031
This PR adds a new function that allows the UI also to display the state
of the data collection. Previously, we only showed that if the project
adhered to the `is_open_source` condition. Now, we show it for all
projects.
Release Notes:
- N/A
Regressions in #24024:
* `+` was no longer included between modifiers and key
* Multi-character keys like "control" were displayed all lowercase,
whereas before they were all uppercase like "CONTROL". Now they are
capitalized, so "Control".
* Brings back icon for tab key.
Release Notes:
- N/A
We now treat new files that have no content as not-dirty. This fixes the
git diff view when deleted files are present.
It also fixes a long-standing bug where `zed RAEDME` and then closing
the tab would prompt for "unsaved changes" when there were none.
Release Notes:
- Fixed a bug where closing an empty, named, file would warn about
unsaved content.
We think this could fix issues around view invalidation during focus
handling.
I want to run CI on this and see.
cc @mikayla-maki @maxbrunsfeld
Release Notes:
- N/A
Co-authored-by: Conrad Irwin <conrad@zed.dev>
Closes#24124
Release Notes:
- Fixed an issue in vim mode where changing the case of an object at the
end of the line would not change the case of the last character in the
object
Co-authored-by: Conrad Irwin <conrad@zed.dev>
- Fixes auto-indent issues around `elif` caused by auto-indent being prevented due to syntax errors generated before `elif` clause completed
Release Notes:
- Fixed an issue where inserting an elif before an else in bash would
not properly auto-indent
---------
Co-authored-by: Conrad Irwin <conrad@zed.dev>
Creates an indents.scm file for bash and adds regexes for
`{increase,decrease}_indent_pattern` in
`crates/languages/src/bash/config.toml`
so that autoindent works as expected in bash
Note that this PR does not attempt to handle all cases where indenting
might be desired in bash. I am aiming to support ~80% of what people
want while avoiding the more gnarly/edge cases like indented blocks in
case statements and indenting for associative arrays.
This is done with the explicit hope that someone (possibly from the
community) more familiar with and passionate about bash can come through
at a later date and handle those cases
Closes#23628
Release Notes:
- Add basic support for autoindent functionality in bash/shell files
Release Notes:
- Fixed some modifier changed events not being present on Linux X11.
This affected things like the project search palette, where holding ctrl
would not cause the split options to appear.
Certain themes define the `created` and `deleted` status colors, but not
`created_background` and `deleted_background`. Previously, Zed would use
`created` and `deleted` colors, and apply a hard-coded opacity change,
but *not* use `created_background` and `deleted_background`, but that
behavior was inadvertently changed in
https://github.com/zed-industries/zed/pull/22994.
This PR restores the old behavior as a fallback. If a theme defines a
status color, but not the corresponding background color, we'll use a
75% transparent version of the foreground color as a fallback.
Release Notes:
- Fixed an issue in certain themes where diffs would render with the
wrong red and green colors for deletions and insertions.
This adds a new version of the project diff editor to go alongside the
new git panel.
The basics seem to be working, but still todo:
* [ ] Fix untracked files
* [ ] Fix deleted files
* [ ] Show commit message editor at top
* [x] Handle empty state
* [x] Fix panic where locator sometimes seeks to wrong excerpt
Release Notes:
- N/A
This will help us debug a panic we're seeing in their internals.
In order to make this work, I've temporarily forked async-tls with:
https://github.com/async-rs/async-tls/pull/59/files
Closes #ISSUE
Release Notes:
- N/A
I believe this takes care of the remaining events running through the
old flow that requires transformation at the collab server level. I
think all events are now going through `telemetry::event!()`.
For anyone curious where the new telemetry names are coming from, you
can check the `for_snowflake` function within
`crates/collab/src/api/events.rs`, to see how collab is currently
transforming the events going through the old flow.
Release Notes:
- N/A
https://github.com/user-attachments/assets/200b88b8-249a-4841-97cd-fda8365efd00
Now all users in the collab/ssh session can edit the commit input
collaboratively, observing each others' changes live.
A real `.git/COMMIT_EDITMSG` file is opened, which automatically enables
its syntax highlight, but its original context is never used or saved on
disk — this way we avoid stale commit messages from previous commits
that git places there.
A caveat: previous version put some effort into preserving unfinished
commit messages on repo swtiches, but this version would not do that
— instead, it will be blank on startup, and use whatever
`.git/COMMIT_EDITMSG` contents on repo switch
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <cole@zed.dev>
This ensures that the following files are always ignored:
```
"**/.env*"
"**/*.pem"
"**/*.key"
"**/*.cert"
"**/*.crt"
"**/secrets.yml"
```
Release Notes:
- N/A
When requesting completions manually with `editor: Show inline
completion`, we did not check if completions are actually disabled for
the current file (`inline_completions > disabled_globs`)
Release Notes:
- Fixed an issue where the `inline_completions > disabled_globs` setting
would not be respected when manually requesting a completion (`editor:
Show inline completion`)
In the left hand status bar, there are two groups of buttons. There was
a border between the two hardcoded on the first button of the second
group, however, if all buttons in the first group are hidden, the border
doesn't need to be rendered.
(Not handled in this PR) A potentially better approach would be to
change StatusBar's definition from `left_items` and `right_items` to
`left_groups` and `right_groups`, and render dividers between each group
of items. That seemed like a bigger refactor than I wanted to handle for
now, but is an option for the future.
If you use these settings on `main`, the border will show, but with
nothing to the left of it.
```json
{
"collaboration_panel": {
"button": false
},
"outline_panel": {
"button": false
},
"project_panel": {
"button": false,
},
}
```
Screenshots:
Before:
<img width="117" alt="Screenshot 2025-02-02 at 6 19 24 PM"
src="https://github.com/user-attachments/assets/b3401b47-6172-4392-9277-31aa1affaf7a"
/>
<img width="134" alt="Screenshot 2025-02-02 at 6 20 12 PM"
src="https://github.com/user-attachments/assets/1e8caee6-1da8-47f6-8499-9a93b6d8fa27"
/>
After:
<img width="125" alt="Screenshot 2025-02-02 at 6 19 58 PM"
src="https://github.com/user-attachments/assets/9b9f421c-660b-41cb-80e0-acb774c66054"
/>
<img width="132" alt="Screenshot 2025-02-02 at 6 20 20 PM"
src="https://github.com/user-attachments/assets/87e0e475-084b-44df-b820-573c68728c1a"
/>
Release Notes:
- Conditionally render divider in status bar
---------
Co-authored-by: Danilo Leal <67129314+danilo-leal@users.noreply.github.com>
Use of this location info was added in #21758 to help with diagnosing
remote_server panics on drop of tasks on a different thread.
Release Notes:
- N/A
Adds a text property for controlling left, center, or right text
alignment.
#8792 should stay open since this doesn't add support for `justify`
(which would require a much bigger change since this can just alter the
origin of each line, but justify requires changing spacing, whereas
justify requires changes to each platform's shaping code).
Release Notes:
- N/A
Sorry to dump an unsolicited PR for a hot feature! I'm sure someone else
was taking a look at this.
I noticed that token counting was disabled and I was getting error logs
of the form `[2025-01-31T22:59:01-05:00 ERROR assistant_context_editor]
No tokenizer found for model o3-mini` when using the new model. To fix
the issue, this PR registers the `gpt-4` tokenizer for this model.
Release Notes:
- openai: Fixed Assistant token counts for `o3-mini` models
Closes#23334
This does not follow the exact way that windows are resized in vim.
Normally the command is `ctrl-w >` however this PR uses just `ctrl->`.
This is because I could not find a good way to read in a count like `10
ctrl-w ctrl->`. This is not really a problem since `ctrl->` can be held
down, which, in my opinion, speeds up resizing. I think this is a good
compromise since it improves usability; however, I am concerned that
this is not intuitive. I am looking forward to feedback.
Release Notes:
- Added the following commands
- vim::ResizeLeftDock
- vim::ResizeRightDock
- vim::ResizeBottomDock
- Added keybinds
- `ctrl->` for widening left dock
- `ctrl-<` for narrowing left dock
- Removes flakey keybindings from buttons
- Moves git panel entries to use a standard ListItem
- Show a repo selector in the panel when more than one repo is present
- Remove temporary repo selector from title bar
Release Notes:
- N/A
This PR removes the `em_width` and `em_advance` parameters to
`EditorSnapshot::gutter_dimensions` in favor of computing the values
inside of it.
In practice all of the callers were passing in the same values, and
there isn't a circumstance where we would want to pass in different
values.
`gutter_dimensions` has also been modified to return
`Option<GutterDimensions>` instead of `GutterDimensions` so that we can
remove some `.unwrap`s when interacting with the text system.
Release Notes:
- N/A
Follow-up of https://github.com/zed-industries/zed/pull/23869
* Retrieves user + email for collab project clients and use these when
such users commit
Same as in https://github.com/zed-industries/zed/pull/23329, "is it the
right user name and e-mail" and "how to override these" questions apply.
* If this data is unavailable, forbid committing to the remote client
* Forbid running related actions in git panel, if committing/writing is
not permitted
Release Notes:
- N/A
This PR adds a new `wait_for_flag_or_timeout` method to the
`FeatureFlagAppExt` trait.
This encapsulates the somewhat gnarly code for using `wait_for_flag`
with a timeout.
A side benefit of this is that the tasks waiting on the feature flags
run in parallel, so in the case where the feature flags do not resolve
we don't end up having to wait on consecutive timeouts. This should help
a bit with https://github.com/zed-industries/zed/issues/23922.
Release Notes:
- N/A
This PR changes the `ContextStore` constructor to not block on reloading
the contexts before we finish initializing it.
I noticed that the Assistant panel was taking a long time to show up in
the status bar, and upon further investigation uncovered that with a
large number of contexts (I have ~320) it takes a long time to load them
all.
Release Notes:
- N/A
A preparation for collaborative commit message editing.
Before, almost any `.git`-contained file FS update, except
`.git/fsmonitor--daemon/cookies/**` caused git metadata rescan.
This included `index.lock` that was created after any git operation,
e.g. `git status`, which was unnecessary.
Collaborative editing aims to share `.git/COMMIT_EDITMSG` between
multiple users, so there are potentially multiple users editing the file
and causing excessive events.
The change makes worktree to ignore .git/COMMIT_EDITMSG`,
`.git/index.lock` and `.git/fsmonitor--daemon/**` paths and adjusts the
logic to be more extensible: there's much more files Zed can ignore and
still have its git metadata up to date.
Release Notes:
- N/A
This PR updates function signatures, docstrings, and gpui's other
documentation to reflect it's new state following the merge of `Model`
and `View` into `Entity` as well as the removal of `WindowContext`.
Release Notes:
- N/A
Closes#23906
Note: Changes the focused pane when search UI is interacted with on an
unfocused pane rather than leaving the focused pane unchanged as
focusing on click is more likely to be the expected behavior
Release Notes:
- Fixes an issue with search actions so that they now execute on the
clicked pane rather than the focused pane when using search UI in
multiple panes
This PR adds two helpers methods to the `TextSystem`:
- `em_width`
- `em_advance`
These methods return the width and advance width for an `em`,
respectively.
We were using these definitions in a number of different spots, and by
unifying them we better canonicalize that an `em` is based on the `m`
character.
Release Notes:
- N/A
After the user confirmation, only the current instance of the
completions provider had the answer stored.
In this PR, the changes are propagated by having each provider have an
`Entity<choice>`, and having a lookup map with one `Entity<choice>` for
each worktree that `Zeta` has seen.
Release Notes:
- N/A
Closes#23877
Co-Authored-By: Ben <ben@zed.dev>
Co-Authored-By: Michael <michael@zed.dev>
Release Notes:
- vim: Fix navigating to end of line with inlay hints
---------
Co-authored-by: Ben <ben@zed.dev>
Co-authored-by: Michael <michael@zed.dev>
This PR removes the `POST /predict_edits` endpoint from the LLM service,
as it has been superseded by the corresponding endpoint running in
Cloudflare Workers.
All traffic is already being routed to the Cloudflare Workers via the
Workers route, so nothing is hitting this endpoint running in the LLM
service anymore.
You can see the drop off in requests to this endpoint on this graph when
the Workers route was added:
<img width="472" alt="Screenshot 2025-01-30 at 9 18 04 PM"
src="https://github.com/user-attachments/assets/fa60f7c8-2737-4329-88a3-17093bdb5a29"
/>
We also don't use the `fireworks` crate anymore in this repo, so it has
been removed.
Release Notes:
- N/A
This PR changes the edit predictions URL for Zed Staff back to
`llm.zed.dev/predict_edits`.
This endpoint is now being routed to the Cloudflare Workers instead of
the LLM service.
Release Notes:
- N/A
This PR makes it so when you install an extension with icon themes it
will deploy the icon theme selector filtered down to the newly-installed
icon themes.
This is similar to what we do when installing an extension with themes.
Because we can only have one picker open at a time, when installing an
extension that has _both_ themes and icon themes, the theme selector
will take precedence.
Release Notes:
- N/A
This PR adds a `schema_generator` crate that can be used to generate our
various JSON schemas for publishing elsewhere.
Currently it does the simplest thing possible and just prints the JSON
schema to stdout. We can make this a but more robust later.
I also removed the schema-printing facilities from the `theme_importer`,
as they don't really make sense there.
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/23981
Release Notes:
- Fixed a crash that could happen when expanding certain diff hunks
- Fixed a bug where diff hunks were not syntax highlighted when
reopening a project with previously-opened buffers.
GPUI applications can set the window class by the `app_id` window
option. However, GPUI will map the window first and then change the
window class after the window is displayed. This doesn't work on some
X11 window managers. FVWM, for example, does not track window class
after a window is mapped. Because in practice, a window shouldn't change
its application group on the fly.
This PR fixed this by adding a `map_window()` function `PlatformWindow`.
On X11, it will `set_app_id()` first and then map the window.
Release Notes:
- N/A
Previously, editor elements had to listen for mouse_up events to
determine when a click had completed. This meant that they only had
access to modifier keys that were pressed during the mouse_up event.
This led to some incorrect user experiences, such as executing a
ctrl+click if the user pressed ctrl after pressing the mouse button, but
before releasing it.
This change adds a click event handler to EditorElement, and adds a
modifier() method to the ClickEvent, which only includes the modifier
keys that were pressed during both mouse down and mouse up. The code for
handling link clicks has been moved into the click event handler, so
that it's only triggered when the non-multi-cursor modifier was held for
both the mouse down and mouse up events.
Closes#12752, #16074, #17892 (the latter two seem to be duplicates of
the former!)
Release Notes:
- Fixed a bug where pressing ctrl/cmd (or other modifiers) after mouse
down but before mouse up still triggered ctrl/cmd+click behavior (e.g.
"go to definition")
This PR adds support for icon themes.
Closes https://github.com/zed-industries/zed/issues/8843.
Here is Zed with Material Icons:
<img width="1136" alt="Screenshot 2025-01-30 at 7 02 06 PM"
src="https://github.com/user-attachments/assets/57d8a0e0-ff38-44d9-8628-af58a60a7c9a"
/>
### Extensions
Extensions can provide icon themes as well as the icons used in those
themes.
Icon themes are defined as JSON files in the `icon_themes` directory,
and icons included in the `icons` directory will be packaged up with the
extension.
All icon paths within an icon theme are interpreted relative to the root
of the extension.
See the [Material Icon
Theme](https://github.com/zed-extensions/material-icon-theme) extension
for an example.
Release Notes:
- Added support for icon themes.
- Extensions can now provide icon themes.
- Use the `icon theme selector: toggle` action to switch between
installed icon themes.
This PR fixes an issue where we weren't properly resolving directory and
chevron icons from icon themes the way we were for file icons.
We need to interpret the icon paths as relative to the extension
directory.
Release Notes:
- N/A
Realized that the logic in #23814 was more than needed, and harder to
maintain. Something like that could make sense if using the tokenizer
and wanting to precisely hit a token limit. However in the case of edit
predictions it's more of a latency+expense vs capability tradeoff, and
so such precision is unnecessary.
Happily this change didn't require much extra work, just copy-modifying
parts of that change was sufficient.
Release Notes:
- N/A
This PR updates the Zed extension CLI with support for packaging
extensions containing icon themes.
The `icons` directory in the extension will be copied into the packaged
extension to facilitate distributing icon files.
Release Notes:
- N/A
This PR unships tool use from Assistant1.
This was only ever partially implemented, and was never released to end
users.
Assistant2 will support tool use.
Release Notes:
- N/A
Closes#14170
To fix this, Zed needs to handle swipe events on its NSView. Logitech
mice don't send the usual Mouse4 and Mouse5 buttons but emulate swipe
gestures according to these websites:
- https://superuser.com/a/1216049
- https://sensible-side-buttons.archagon.net/
Of course, the user can map these buttons to something else in the
device's driver. Most IDEs (VSCode, IntelliJ) handle that correctly by
default so it would be good to follow that pattern.
Since it's my first contribution here, please let me know if I need to
enhance this PR to make it good enough for the main branch.
Release Notes:
- Fixed mouse navigation buttons on some devices (Logitech, Mac OS)
This ensures that we do not fetch a new completion when the edits of the
user can be interpolated.
E.g. (suggestions in `[]`):
```rust
s[truct Person {}]
```
Then if i type out `truct` we will not fetch a new completion
Release Notes:
- N/A
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [tempfile](https://stebalien.com/projects/tempfile-rs/)
([source](https://redirect.github.com/Stebalien/tempfile)) |
workspace.dependencies | minor | `3.15.0` -> `3.16.0` |
---
### Release Notes
<details>
<summary>Stebalien/tempfile (tempfile)</summary>
###
[`v3.16.0`](https://redirect.github.com/Stebalien/tempfile/blob/HEAD/CHANGELOG.md#3160)
[Compare
Source](https://redirect.github.com/Stebalien/tempfile/compare/v3.15.0...v3.16.0)
- Update `getrandom` to `0.3.0` (thanks to
[@​paolobarbolini](https://redirect.github.com/paolobarbolini)).
- Allow `windows-sys` versions `0.59.x` in addition to `0.59.0` (thanks
[@​ErichDonGubler](https://redirect.github.com/ErichDonGubler)).
- Improved security documentation (thanks to
[@​n0toose](https://redirect.github.com/n0toose) for collaborating
with me on this).
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xMjUuMSIsInVwZGF0ZWRJblZlciI6IjM5LjEyNS4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [aws-sdk-kinesis](https://redirect.github.com/awslabs/aws-sdk-rust) |
dependencies | minor | `1.58.0` -> `1.59.0` |
| [aws-sdk-s3](https://redirect.github.com/awslabs/aws-sdk-rust) |
dependencies | minor | `1.71.0` -> `1.72.0` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
👻 **Immortal**: This PR will be recreated if closed unmerged. Get
[config
help](https://redirect.github.com/renovatebot/renovate/discussions) if
that's undesired.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xMjUuMSIsInVwZGF0ZWRJblZlciI6IjM5LjEyNS4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Modify the new issue templates so that the summary of the issue is
hopefully at the top and visible in previews/references to the issue
Release Notes:
- N/A
This PR fixes the license for the `anthropic` crate.
It was mistakenly licensed as AGPL, despite being used outside of
collab. It should be licensed as GPL.
Release Notes:
- N/A
Closes#23383
This PR changes `project_panel::NewSearchInDirectory` to open project
search filtered by the parent directory when triggered on a file, rather
than doing nothing.
Release Notes:
- Improved `project_panel::NewSearchInDirectory` to search the parent
directory when triggered on a file
This PR prevents situations like
https://github.com/zed-industries/zed/pull/23850, which caused our linux
nightly build to fail to open at all.
This PR also sorts the GPUI build and dev dependencies out from the sea
of platform specific dependencies.
Release Notes:
- N/A
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [aws-config](https://redirect.github.com/smithy-lang/smithy-rs) |
dependencies | patch | `1.5.14` -> `1.5.15` |
| [aws-sdk-kinesis](https://redirect.github.com/awslabs/aws-sdk-rust) |
dependencies | minor | `1.56.0` -> `1.58.0` |
| [aws-sdk-s3](https://redirect.github.com/awslabs/aws-sdk-rust) |
dependencies | minor | `1.69.0` -> `1.71.0` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
👻 **Immortal**: This PR will be recreated if closed unmerged. Get
[config
help](https://redirect.github.com/renovatebot/renovate/discussions) if
that's undesired.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xMjUuMSIsInVwZGF0ZWRJblZlciI6IjM5LjEyNS4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Limits the size of the buffer excerpt and the size of change history.
Release Notes:
- N/A
---------
Co-authored-by: Richard <richard@zed.dev>
Co-authored-by: Joao <joao@zed.dev>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [serde_json](https://redirect.github.com/serde-rs/json) | dependencies
| patch | `1.0.137` -> `1.0.138` |
| [serde_json](https://redirect.github.com/serde-rs/json) |
workspace.dependencies | patch | `1.0.137` -> `1.0.138` |
---
### Release Notes
<details>
<summary>serde-rs/json (serde_json)</summary>
###
[`v1.0.138`](https://redirect.github.com/serde-rs/json/releases/tag/v1.0.138)
[Compare
Source](https://redirect.github.com/serde-rs/json/compare/v1.0.137...v1.0.138)
- Documentation improvements
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about these
updates again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xMjUuMSIsInVwZGF0ZWRJblZlciI6IjM5LjEyNS4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Part of https://github.com/zed-industries/zed/pull/21092
As we're already depending on and using `tokio` to run `reqwest`, I've
added a crate to make running tokio futures more convenient. This should
unblock the Bedrock Cloud Model provider PR.
Note that since the `gpui_tokio` code is nearly trivial glue and I
expect that it will be useful for the nascent GPUI ecosystem, I've
elected to license it under Apache 2, like GPUI itself, instead of our
normal GPL license for Zed code.
Release Notes:
- N/A
> **Note:** https://github.com/zed-industries/zed/pull/23813 should be
merged first!
@nathansobo and I paired on revising this menu, including adding the
"Predict Edits at Cursor" menu item (to make the keyboard shortcut more
discoverable; clicking it makes the inline edits show up, as shown in
the second screenshot) and switching from "Hide/Show" language to
checkboxes.
## Before
<img width="282" alt="Screenshot 2025-01-28 at 4 51 37 PM"
src="https://github.com/user-attachments/assets/309c82c1-8fb5-44db-950e-1a8789a63993"
/>
## After
<img width="1138" alt="Screenshot 2025-01-28 at 4 50 05 PM"
src="https://github.com/user-attachments/assets/302a126c-9389-42a4-bb7d-2896bce859e7"
/>
We also switched to use `SharedString` in more places, where it made
more sense.
@danilo-leal This isn't necessarily *exactly* what we want, but we were
pairing and decided to get it in a state where we can actually try it
out and tweak from here.
Release Notes:
- N/A
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [actions/setup-node](https://redirect.github.com/actions/setup-node) |
action | digest | `39370e3` -> `1d0ff46` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xMjUuMSIsInVwZGF0ZWRJblZlciI6IjM5LjEyNS4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Closes#20762
Release Notes:
- N/A
---
Enable MSAA for Anti-Aliasing to Path (`cx.paint_path`) for drawing a
better vector graphics.
```bash
cargo run -p gpui --example gradient --features macos-blade
cargo run -p gpui --example gradient
cargo run -p gpui --example painting --features macos-blade
cargo run -p gpui --example painting
```
**Before**
<img width="1089" alt="image"
src="https://github.com/user-attachments/assets/0ae7240f-4ba9-4ef5-896c-e436c1282770"
/>
**After**
<img width="944" alt="image"
src="https://github.com/user-attachments/assets/71a07ae8-be54-452c-aacc-b8cec1f810c0"
/>
## TODO
- [x] Support Metal and Blade.
- [x] Detect system support to set up sample count.
- [x] Fix extra lines between Path vertices wait #22808 to merge.
Ref https://github.com/kvark/blade/pull/213
Ask @kvark to review.
I am not sure if there is anything I missed. I modified it according to
the
[particle](https://github.com/kvark/blade/tree/main/examples/particle)
example of Blade project. But the difference is that after the first
MSAA render, I did not do it a second time, I tested it and found it was
not necessary.
This PR does some somewhat light UI adjustment to the Assistant 2
settings view. The Prompt Library section should feature the default
prompts in the future, so that's why it's been separated that way.
<img width="800" alt="Screenshot 2025-01-29 at 2 59 59 PM"
src="https://github.com/user-attachments/assets/7b033bde-51ab-44d5-9e53-3f72b8ff5f51"
/>
Release Notes:
- N/A
This PR makes it so staff edit predictions now go through Cloudflare
Workers instead of going to the LLM service.
This will allow us to dogfood the new LLM worker to make sure it is
working as expected.
Release Notes:
- N/A
TODO:
- [x] BackgroundOrientation
- [x] PatternDash
- [x] `pattern_horizontal_dash` & `pattern_vertical_dash`
- [x] Metal dash shader
- [x] Blade dash shader
- [x] Update ui::Divider to use new pattern
---
This PR introduces proper dashed dividers using the new `PatternDash`
background shader.
Before this we were using 128 elements to create a dashed divider, which
is both expensive, and would not scale beyond a certain size. This
allows us to simplify the divider element as well.
Changes:
- Adds `BackgroundOrientation` to `gpui::color::Background` to allow
specifying a direction for a pattern
- Adds the PatternDash pattern variant
- Updates `ui::Divider`'s dashed variants to be more efficient
Misc:
- Documents the `ui::Divider` component
- Treat `.metal` files as `C` in the Zed project until we get some metal
syntax highlighting.
Release Notes:
- N/A
This PR adds a new internal `POST /snowflake/events` endpoint to collab.
This endpoint is protected with the admin token like our other internal
endpoints.
This endpoint accepts a `SnowflakeRow` in the body and writes it to the
AWS Kinesis stream.
Release Notes:
- N/A
Previously we returned an error when the interpolation failed in
`process_completion_response`.
However, it is not an error when interpolation returns `None`. That just
means that the predicted edits can be discarded, because the user typed
something that is not a subset of what the model predicted OR if the
model responds with a no-op.
```
2025-01-29T09:44:30.221135+01:00 [ERROR] zeta prediction failed
Caused by:
Interpolated edits are empty
```
Release Notes:
- N/A
Required using a global `LazyLock<Mutex<AppNotifications>>` instead of a
context global because settings errors first occur before initialization
of the notifications global.
Release Notes:
- Errors in settings file are now reported in UI on startup.
# Add AnyBrackets text object for Vim mode
## Overview
This PR introduces a new text object `AnyBrackets` that allows
operations on the closest matching pair of brackets, regardless of the
bracket type. This enhances the editing experience by reducing the need
to identify specific bracket types before performing text operations.
By default, this feature is NOT mapped to any key in vim.json. However,
it can be enabled manually, and the recommended key for mapping is b:
If you want to add it to your zed keymap config you need to add the
following config:
```json
{
"context": "vim_operator == a || vim_operator == i || vim_operator == cs",
"bindings": {
"b": "vim::AnyBrackets"
}
}
```
## Features
- New text object that works with parentheses `()`, square brackets
`[]`, curly braces `{}`, they are also know as round brackets, square
brackets and curly brackets in english.
- Automatically finds the closest matching pair of any bracket type
- Works with all standard Vim operators (delete, change, yank)
- Supports both "inside" and "around" variants (`i` and `a`)
## Usage Examples
```vim
# Delete inside the closest brackets
di( # Works on (), [] or {} depending on which is closest
# Change around the closest brackets
ca[ # Works on (), [] or {} depending on which is closest
# Visual select inside the closest brackets
vi{ # Works on (), [] or {} depending on which is closest
```
# References:
- Based on the popular plugin https://github.com/echasnovski/mini.ai
# Important Notes
This PR also fixes a bug with nested quotes on AnyQuotes, now it works
fine with any type of quotes or brackets.
Please take a look at the new tests to understand the expected behavior.
Release Notes:
- vim: Add `ab`/`ib` "AnyBrackets" text objects that are the smallest of
`a(`, `a[` or `a{` or `i(`, `i[` or `i{`
- vim: Fix aq/iq "AnyQuotes" text objects when they are nested
This fixes an edge case when two hunk controls button groups were
visible (due to having text cursor on one hunk, and mouse cursor on the
other). In that situation, the mouse states for the two button groups
would mirror.
Release Notes:
- N/A
This PR fixes a typo in the error that occurs when trying to construct
an AWS Kinesis client and the `kinesis_region` value is missing.
Release Notes:
- N/A
This PR updates the GitHub Action definitions to restrict more CI jobs
to only run in the `zed-industries` organization (and thus, not on
forks).
Release Notes:
- N/A
TODO:
- [x] Add BackgroundTag::PatternSlash
- [x] Support metal slash pattern fills
- [x] Support blade slash pattern fills
---
Adds support for a new background type in gpui, `pattern_slash`.
Usage:
```rust
div().size(px(56.0)).bg(pattern_slash(gpui::red()))
```
This will create a 56px square with a red slash pattern fill.
You can run the pattern example with `cargo run -p gpui --example
pattern`:
---
After talking with @as-cii at length about how we want to support
patterns in gpui, we decided for now we'll simply add a new
BackgroundTag specific to this pattern.
It isn't the best long term plan however – we'll likely want to
introduce the concept of a `Fill` at some point so we can have
`Fill::Solid`, `Fill::Gradient(LinearGradient)`, etc in the future.
The pattern is designed to seamlessly tile vertically for elements of
the same height. For example, for use in editor line backgrounds:
---
Release Notes:
(do we do gpui release notes?)
- Adds support for slash pattern fills in `gpui`.
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
This PR fixes an issue introduced in
https://github.com/zed-industries/zed/pull/20551/ that would prevent
models with unknown IDs from working in the LLM service.
We only need to look up a model from its ID for the beta headers, and if
we can't find that particular model we should fall back to the default
beta headers instead of bailing out completely,
Release Notes:
- N/A
In both `thread` and `prompt editor` the context file picker, gitignored
files are hidden (as expected) when searching files by path, but they
are still shown initially as you create the file picker.
Plus, selecting gitignored files in the `prompt editor` is bugged and
collapses everything.
This PR settles on not showing gitignored files to solve these
inconsistencies.
Release Notes:
- Fix gitignored files filter occasionally not working in context file
picker.
Now both remote collab and ssh remote get entries shown and updated in
the git panel.
This seems to be quite a step towards remote git support, hence
submitting a PR.
Further steps: remove `get_local_repo` and allow getting the repo from
`Worktree`, not its local counterpart + have another, remote impl of the
`GitRepository` trait.
Release Notes:
- N/A
This fixes the panics we we're seeing in `EditPreview::highlight_edits`.
The reason for this was that we were interpolating edits incorrectly.
Here's an example:
```rust
let a = 0; // existing code
let c = 2; // suggested by edit prediction
```
The edits would look like this: `[(Point(1, 0)..Point(1, 0), "let c =
2;"]`
Now i type:
```rust
let a = 0; // existing code
let b = 1; // added this line
let c = 2; // suggested by edit prediction
```
Before this change, the `interpolate` function would allow insertions
before the edit prediction edits, the anchors will move to the next
line.
The edits would look now like this: `[(Point(2, 0)..Point(2, 0), "let c
= 2;"]`
However, now we end up with a call to `EditPreview::highlight_edits`,
with the following parameters:
- current_snapshot:
```rust
let a = 0;
let b = 1;
```
- edits: `[(Point(2, 0)..Point(2, 0), "let c = 2;"]`
- applied_edits_snapshot:
```rust
let a = 0;
let c = 2;
```
And here you can see the issue, applying the `edits` to the
`current_snapshot` should always end up re-creating the text that is
present in the `applied_edits_snapshot`. That is not the case here
though, meaning that the offsets in the new buffer are not correct,
which can either lead to a confusing popup or a crash if the suggestion
is at the end of the file.
Here's a real world example (edit prediction is ONLY suggesting to
delete a new line):
<img width="487" alt="Screenshot 2025-01-27 at 13 05 26"
src="https://github.com/user-attachments/assets/a0a8064e-8cfa-48b2-9f1c-efc2d0d9d7d4"
/>
We fixed this by only allowing interpolation if the user is editing
after all the edit predictions OR if the user edit is a subset of the
model suggestion.
Co-Authored-by: Antonio <antonio@zed.dev>
Release Notes:
- N/A
Co-authored-by: Antonio <antonio@zed.dev>
Following up on #20763, this PR adds support for module- and class-level
docstrings, adds "additional docstrings" as described in [PEP
257](https://peps.python.org/pep-0257/), and fixes function-level
docstrings so that only the first string literal in a function gets
treated as a docstring.
One question that occurs to me is: Would it be good to capture attribute
and additional docstrings differently from regular docstrings? E.g.
`@string.doc.attribute`, `@string.doc.additional`? PEP 257 mentions that
unlike regular docstrings, these docstrings are ignored by the
interpreter (regular docstrings get added as the `__doc__` property of
the object they document), so I can see someone potentially wanting to
style them a little differently.
Release notes:
* Added Python syntax highlighting for class- and module-level
docstrings, additional docstrings, and improved recognition of
function-level docstrings.
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
This PR adds menu item for `workspace::OpenFiles` in app menu on Linux
and Windows.
Context:
When opening a file or folder on Linux and Windows via the native file
picker, the picker can be either in file-only mode or folder-only mode.
This means you have to open it already knowing whether you want to open
a file or a folder, unlike macOS, which lets you choose either in the
same picker.
For this reason, a new action, `workspace::OpenFiles`, was recently
added for Linux and Windows. This is basically file-only mode, alongside
the existing `workspace::Open` action, which is folder-only. In macOS,
the `workspace::Open` action is sufficient to open both file and folder.
Before:
<img
src="https://github.com/user-attachments/assets/67dc95d6-e98d-438a-9568-570e87617f85"
alt="Before" width="200" />
After:
<img
src="https://github.com/user-attachments/assets/d0ffd02c-0f48-4edc-b426-4d430f2e0c86"
alt="After" width="200" />
Release Notes:
- Added "Open File" action in file menu for Linux and Windows.
Closes#18702
This is take 2 of [my previous
PR](https://github.com/zed-industries/zed/pull/19555), which was closed
due to inactivity and merge conflicts.
**Cause**:
The editor's horizontal scroll width only considers the longest line in
the buffer, using `layout_line` for `longest_row`. The inline blame
width isn’t included in it because it is just a decoration on top of the
line (think of like CSS absolute) and not part of its actual content.
This causes blame to overflow.
**Solution**:
Along with `longest_row` width we also add that line's inline blame
width for scroll width calculation. We also have to add some padding
that is between inline blame and line's content.
**Alternate Solution**:
In my previous PR, instead of adding the inline blame width of the
longest line for scroll width calculation, I used the inline blame of
the current line the cursor is on (since we only see the blame for the
current line). I added that to the current line's width, giving us the
full width of that row. Then, we compare that row's width with the
longest row width and use the max of the two for the scroll width
calculation.
While this solution seems clever, it's overly complicated and could
cause issues, like the scroll width changing every time you move the
cursor up or down. I don't think we should go with this, but I'm open to
suggestions.
**Preview**:
Before:
https://github.com/user-attachments/assets/01ef90cf-06e7-4ebb-8bd1-637a53e0654e
After:
https://github.com/user-attachments/assets/b13616de-bdea-4da4-b32d-9c4104448166
Release Notes:
- Fixed inline Git blame not visible on long lines due to overflow.
Closes#19192
1. Changed the drag overlay of entries for better visibility of where to
drop.
2. Folded directories (except for the last folded one) will be
highlighted as drop targets.
3. The delimiter between folded directories prevents the directory
highlight from losing focus and acts as part of the directory to avoid
flickering.
This works just like VS Code does.
[fold-drop.webm](https://github.com/user-attachments/assets/853f7c5e-3492-4f56-9736-6d0e3ef09325)
Release Notes:
- Added precise drag-and-drop for files onto folded directories in the
Project Panel.
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Closes#15966
This PR adds `Alt/Opt+Click` to expand or collapse a directory and all
its contents.
Context:
The current `expand_entry` scans immediate child subdirectories if they
aren’t loaded, while `expand_all_for_entry` scans the entire subtree.
The latter takes longer, so we wait for it to complete to ensure
accurate results.
For full directory scan, instead of using
`refresh_entries_for_paths(vec![path])`, which requires specifying all
explicit paths to refresh, we use `add_path_prefix_to_scan`, which
eliminates the need to list every path. Both methods internally call
`reload_entries_for_paths`, which invokes `should_scan_directory`. This
determines whether to scan deeper based on a path prefix match between
the given directory and its subdirectories, returning `true` for
`add_path_prefix_to_scan`.
The existing code handles scanning, removing path prefixes after scans
complete, and managing ignored directories.
How it works (Expand):
1. Alt clicking on non-ignored closed directory, expands it and all its
subdirectories, except ignored subdirectories. This helps while working
on mono repos, where you might not want to expand dirs like
`node_modules`, `dist`, etc or git submodules, when you expand any root
dir.
In example, `draft` and `posts` dir are ignored dir.
[expand-1.webm](https://github.com/user-attachments/assets/07d3f724-0757-408f-b349-5beb4ee8440e)
2. Alt clicking on ignored closed directory, expands it and all its
subdirectories. This is when you explicitly want to do it, on dirs like
`node_modules`, `dist`, etc.
In example, `dist` dir is ignored dir.
[expand-2.webm](https://github.com/user-attachments/assets/99e55883-ab1a-4a9c-a0f0-48026991a922)
3. In case of auto folded subdirectories, expand all action will take
precedence over it. That is, it will unfold all the subdirectories
inside clicked dir. This is intentional, as user explicitly wants to
reveal as much content as possible. (This is my personal opinion on how
it should work).
[expand-3.webm](https://github.com/user-attachments/assets/f20b0311-e92a-4e34-b640-1469b0d6fa16)
How it works (Collapse):
1. Alt clicking any opened directory will collapse it and all its
children, whether ignored or not. This is when you want to start from a
fresh state.
2. When auto fold is enabled in settings, collapse action will also fold
all subdirectories that it can fold. This is to bring it back to its
fresh state as mentioned above.
[collapse-1-2.webm](https://github.com/user-attachments/assets/74db6cee-0afa-406b-a9a2-7421083a2c2a)
Future:
- Using keybinding to expand/collapse all for selected entry
- Handle expand/collapse all for folded entry
Todos:
- [x] Expand entries logic
- [x] Handle remote worktree for expand
- [x] Figure out scan complete status
- [x] Move expansion logic to status update event
- [x] Collapse entries logic
- [x] Handle fold/unfold subdirs interaction
- [x] Do not expand git ignored sub-dirs
- [x] Tests
- [x] Test Remote
Release Notes:
- Added Alt/Opt+Click functionality to expand or collapse a directory
and all its contents.
I recently noticed that on my Windows 11 machine, Zed no longer receive
the `WM_DWMCOLORIZATIONCOLORCHANGED` message when the system theme
changes. This functionality was present in the past. While this change
might be unexpected, it's understandable given Microsoft's history of
system updates.
This pull request proposes an alternative approach using the
`WM_SETTINGCHANGE` message to handle theme changes.
Release Notes:
- N/A
We used to wait 6 months to close stale issues. Jono suggested 1 month.
I'm sort of splitting the difference and adding a bit of buffer. We can
adjust again later on, if we want.
Release Notes:
- N/A
Closes#21625#17401#16426
This is how the opening of a file works currently:
1. We first check if the file is part of any existing worktree. If it
is, we focus on that file in the worktree, and the window is activated.
2. If the file is not part of any worktree, we open it in the first
local non-collab workspace we find and activate that window. This is the
bug that the issues are based on.
This PR fixes it by modifying the second part of the above step, where
the file is not part of any worktree. Now, we will first open the file
in the active window, but only if the active window is local and
non-collab. This resolves the issue. If the file can't be opened in the
active window due to the local non-collab check, we will carry out the
existing logic of opening the file in whichever window is local and
non-collab.
I have tested this using the "workspace::OpenFiles" action, and
"workspace::Open" also uses the same method. That is, it will work on
all platforms.
Future: Some users also mentioned there should be a setting for whether
we should open a non-workspace file in the existing window or in a
separate new window. However, this seems out of scope, and a new issue
should be created for this.
#9370 is related, but this likely doesn't fix it, as it deals with how
macOS Finder's "Open with" handles files. I don't have macOS to test,
but this PR won't resolve it if Finder always opens a new window.
Release Notes:
- Fixed the issue where a file outside of the workspace was opening in a
random window instead of the last active window.
This fixes an issue introduced in #22994 where soft wrap would
recalculate for the entire buffer when editing.
Release Notes:
- N/A
---------
Co-authored-by: Conrad <conrad@zed.dev>
This PR adds the `show_tab_bar_buttons` under `tab_bar` that allows
hiding the "New", "Split Pane", and "Zoom" buttons to the left of the
pane tab bar.
Release Notes:
- Added a new `show_tab_bar_buttons` setting, under `tab_bar`, that
enables hiding the pane tab bar buttons.
This PR adds really tiny visual adjustments to the assistant 2. I guess
the most note-worthy thing here is that I separated the `title` for
History views into two just because I wanted to render the `/` smaller
and lighter. 😬
Release Notes:
- N/A
Fix bugs caused by the window context PR, where the window could be on
the stack and is then requested from the App.
This PR also adds derive macros for `AppContext` and `VisualContext` so
that it's easy to define further contexts in API code, such as
`editor::BlockContext`.
Release Notes:
- N/A
- Added support for DeepSeek as a new language model provider in Zed
Assistant
- Implemented streaming API support for real-time responses from
DeepSeek models.
- Added a configuration UI for DeepSeek API key management and settings.
- Updated documentation with detailed setup instructions for DeepSeek
integration.
- Added DeepSeek-specific icons and model definitions for seamless
integration into the Zed UI.
- Integrated DeepSeek into the language model registry, making it
available alongside other providers like OpenAI and Anthropic.
Release Notes:
- Added support for DeepSeek to the Assistant.
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
This PR changes the `ThreadStore` constructor to not block on reloading
the threads before we finish initializing it.
This allows us to make the constructor synchronous instead of
asynchronous.
Release Notes:
- N/A
This PR fixes an issues where clicking the "Open Configuration" button
wasn't opening the configuration.
We needed to change how the action was dispatched after #22632.
Release Notes:
- N/A
This PR adds some logging so we can debug the issues some folks have
been having with Assistant2 not getting initialized properly.
All the logs are prefixed with `[assistant2-debug]` so they're easier to
pick out of the logs, as well as find them later to clean up once we've
diagnosed the issue.
Release Notes:
- N/A
Dev builds show panics related to completion label normalization
<details>
<summary>Panic</summary>
```
index out of bounds: the len is 103 but the index is 103
zed::reliability::init_panic_hook::{{closure}}::h78130eff43c84f6f+110375521
std::panicking::rust_panic_with_hook::hfe205f6954b2c97b+87457752
std::panicking::begin_panic_handler::{{closure}}::h6cb44b3a50f28c44+87456967
std::sys::backtrace::__rust_end_short_backtrace::hf1c1f2a92799bb0e+87449337
rust_begin_unwind+87456084
core::panicking::panic_fmt::h3d8fc78294164da7+7033011
core::panicking::panic_bounds_check::h9397cb495d89a72d+7033511
project::lsp_store::ensure_uniform_list_compatible_label::haf80316ce11edd67+72663592
project::lsp_store::populate_labels_for_completions::{{closure}}::hc93c3c540ef7d2d6+72642960
project::lsp_store::LspStore::completions::{{closure}}::{{closure}}::hb4b5432e24432ca8+72336627
async_task::raw::RawTask<F,T,S,M>::run::hf444c3dc07dd583b+68504803
<gpui::platform::linux::wayland::client::WaylandClient as gpui::platform::linux::platform::LinuxClient>::run::hbf5a316eb781a10d+50646579
gpui::platform::linux::platform::<impl gpui::platform::Platform for P>::run::hc85518d4552fc4cd+50496669
gpui::app::App::run::hca4e2eaf984ca6f6+109905269
zed::main::h849467ac1a6d32c9+110413414
std::sys::backtrace::__rust_begin_short_backtrace::h81b5ee155a7cf505+110835475
std::rt::lang_start::{{closure}}::h48a83f884cfb6865+110834761
std::rt::lang_start_internal::h5e7c81cecd7f0954+87382485
main+110425932
__libc_start_call_main+22789462491720
__libc_start_main_alias_1+22789462491915
_start+10436606
```
</details>
This can only happen when either `label.runs` or `label.filter_range`
has a range that's larger than the label text, which is an error.
Instead of panicking, log such errors and fall back to last index (which
is not really helpful, but still).
Release Notes:
- N/A
Fix a bug where a GPUI macro still used `ModelContext`
Rename `AsyncAppContext` -> `AsyncApp`
Rename update_model, read_model, insert_model, and reserve_model to
update_entity, read_entity, insert_entity, and reserve_entity
Release Notes:
- N/A
In the Windows test environment, the paths generated by `temp_tree()`
are symlink paths, which causes certain tests to fail.
I later noticed that when opening a project, we seem to always use
`canonicalize` to normalize the paths, as shown here:
https://github.com/zed-industries/zed/pull/21039.
This PR adopts a similar approach for the test environment to address
the issue.
Release Notes:
- N/A
Closes#23621
Change was in #23378. Also adds a comment to clarify why this is
inconsistent with all other uses of `bindings_for_action`.
Release Notes:
- N/A
There's still a bit more work to do on this, but this PR is compiling
(with warnings) after eliminating the key types. When the tasks below
are complete, this will be the new narrative for GPUI:
- `Entity<T>` - This replaces `View<T>`/`Model<T>`. It represents a unit
of state, and if `T` implements `Render`, then `Entity<T>` implements
`Element`.
- `&mut App` This replaces `AppContext` and represents the app.
- `&mut Context<T>` This replaces `ModelContext` and derefs to `App`. It
is provided by the framework when updating an entity.
- `&mut Window` Broken out of `&mut WindowContext` which no longer
exists. Every method that once took `&mut WindowContext` now takes `&mut
Window, &mut App` and every method that took `&mut ViewContext<T>` now
takes `&mut Window, &mut Context<T>`
Not pictured here are the two other failed attempts. It's been quite a
month!
Tasks:
- [x] Remove `View`, `ViewContext`, `WindowContext` and thread through
`Window`
- [x] [@cole-miller @mikayla-maki] Redraw window when entities change
- [x] [@cole-miller @mikayla-maki] Get examples and Zed running
- [x] [@cole-miller @mikayla-maki] Fix Zed rendering
- [x] [@mikayla-maki] Fix todo! macros and comments
- [x] Fix a bug where the editor would not be redrawn because of view
caching
- [x] remove publicness window.notify() and replace with
`AppContext::notify`
- [x] remove `observe_new_window_models`, replace with
`observe_new_models` with an optional window
- [x] Fix a bug where the project panel would not be redrawn because of
the wrong refresh() call being used
- [x] Fix the tests
- [x] Fix warnings by eliminating `Window` params or using `_`
- [x] Fix conflicts
- [x] Simplify generic code where possible
- [x] Rename types
- [ ] Update docs
### issues post merge
- [x] Issues switching between normal and insert mode
- [x] Assistant re-rendering failure
- [x] Vim test failures
- [x] Mac build issue
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Joseph <joseph@zed.dev>
Co-authored-by: max <max@zed.dev>
Co-authored-by: Michael Sloan <michael@zed.dev>
Co-authored-by: Mikayla Maki <mikaylamaki@Mikaylas-MacBook-Pro.local>
Co-authored-by: Mikayla <mikayla.c.maki@gmail.com>
Co-authored-by: joão <joao@zed.dev>
The pattern in Zed and in other editors is to use `cmd` to modify some
file-opening action to open it in a split rather than in the current
pane.
- In the project pane, a `click` opens a file, and a `cmd-click` opens
it in a split
- In the file finder, `enter` opens the file, and a `cmd-enter` opens it
in a split
It makes sense to me that if `alt-enter` opens a file from the excerpt,
that `cmd-alt-enter` opens it in a split, following the pattern above.
Note: I'm not auto-merging this, as others might disagree.
Note: I didn't touch the Vim binding.
Release Notes:
- Breaking Change: Changed `editor: open excerpts split` key binding to
`cmd-alt-enter` on macOS and `ctrl-alt-enter` on Linux.
Follow-up to: https://github.com/zed-industries/zed/pull/23644
- Existing: `alt-enter` to open files from multi-buffer selections
- New: `alt-enter` to open multi-buffer from file selections
I updated the original PR changelog line.
Release Notes:
- N/A
Closes#12553
* [x] Fix `diff_hunk_before`
* [x] Fix failure to show deleted text when expanding hunk w/ cursor on
second line of the hunk
* [x] Failure to expand diff hunk below the cursor.
* [x] Delete the whole file, and expand the diff. Backspace over the
deleted hunk, panic!
* [x] Go-to-line now counts the diff hunks, but it should not
* [x] backspace at the beginning of a deleted hunk deletes too much text
* [x] Indent guides are rendered incorrectly
* [ ] Fix randomized multi buffer tests
Maybe:
* [ ] Buffer search should include deleted text (in vim mode it turns
out I use `/x` all the time to jump to the next x I can see).
* [ ] vim: should refuse to switch into insert mode if selection is
fully within a diff.
* [ ] vim `o` command when cursor is on last line of deleted hunk.
* [ ] vim `shift-o` on first line of deleted hunk moves cursor but
doesn't insert line
* [x] `enter` at end of diff hunk inserts a new line but doesn't move
cursor
* [x] (`shift-enter` at start of diff hunk does nothing)
* [ ] Inserting a line just before an expanded hunk collapses it
Release Notes:
- Improved diff rendering, allowing you to navigate with your cursor
inside of deleted text in diff hunks.
---------
Co-authored-by: Conrad <conrad@zed.dev>
Co-authored-by: Cole <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Michael <michael@zed.dev>
Co-authored-by: Agus <agus@zed.dev>
Co-authored-by: João <joao@zed.dev>
Also changed rust tasks to be less mouthful.
Release Notes:
- Shortened Rust task labels.
- Task modal will now use full task label when it does not require
truncation.
That's specifically when we're not rendering the user menu with an
Avatar. We were previously rendering a `ButtonLike` with unnecessary
flex styles there. Just a little fine-tune.
Release Notes:
- N/A
This PR disables the Assistant 2 Submit button when either there is no
message written in the editor or there's no model selected. To guide the
user, there will be a tooltip displayed on top of the button to indicate
what to do.
Release Notes:
- N/A
Fixes#23398Closes#23398
We'll bail on searches of files that we know are binary (thus even if we
were to find a match in them, they'd be thrown away by buffer loader).
Release Notes:
- Improved project search performance in worktrees with binary files
We don't want the zeta predictions entry to show in the assistant
context editor when completing slash commands. Zeta will still make
suggestions in the rest of the context editor, like the other providers
do.
Release Notes:
- N/A
This PR updates the `ListItem` component to not register an `on_click`
handler for `ListItem`s that are disabled.
When working on #23350 I noticed that even when the context menu entry
was disabled you could still click on the entry to fire the action.
Release Notes:
- Fixed some instances of disabled list items still registering clicks.
Closes#13979
Please review this approach to hide the permalink, or alternatively to
disable it instead?
Release Notes:
- The Copy Permalink menu item is now disabled when not in a Git
repository.
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Co-Authored-By: Jon Walstedt <jon@walstedt.se>
Closes#22094
Release Notes:
- vim: Added support for ctrl-g
Co-authored-by: Jon Walstedt <jon@walstedt.se>
When clicking the checkbox label fire the toggle action.
At first I wasn't sure this is what we wanted, but after looking at a
few existing implementations of checkboxes with labels it seems like
this is reasonably standard.
Eventually this piece of UI will be updated to a CheckboxWithLabel, but
for now it is custom due to some specific style requirements.
Release Notes:
- N/A
We were not covering a variant where the returned metadata was Ok(None)
Closes #ISSUE
Release Notes:
- Fixed venv activation script path showing up in terminal for
non-existant scripts.
Part of https://github.com/zed-industries/zed/issues/22606
Before, `tsdk_path` for vtsls and typescript-language-server
unconditionally set a `tsdk`/`tsserver` property for the corresponding
language server, even if there were no such directory at all.
Instead, make the corresponding code to omit such property if it was not
found on the FS.
Release Notes:
- Fixed "The path /.../tsserver.js doesn't point to a valid tsserver
install. Falling back to bundled TypeScript version." pop-up appearing
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
|
[cloudflare/wrangler-action](https://redirect.github.com/cloudflare/wrangler-action)
| action | digest | `6d58852` -> `7a5f8bb` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xMDcuMCIsInVwZGF0ZWRJblZlciI6IjM5LjEwNy4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [actions/stale](https://redirect.github.com/actions/stale) | action |
digest | `28ca103` -> `5bef64f` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xMDcuMCIsInVwZGF0ZWRJblZlciI6IjM5LjEwNy4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [metal](https://redirect.github.com/gfx-rs/metal-rs) |
workspace.dependencies | minor | `0.30` -> `0.31` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xMDcuMCIsInVwZGF0ZWRJblZlciI6IjM5LjEwNy4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [convert_case](https://redirect.github.com/rutrum/convert-case) |
workspace.dependencies | minor | `0.6.0` -> `0.7.0` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xMDcuMCIsInVwZGF0ZWRJblZlciI6IjM5LjEwNy4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [semver](https://redirect.github.com/dtolnay/semver) |
workspace.dependencies | patch | `1.0.24` -> `1.0.25` |
---
### Release Notes
<details>
<summary>dtolnay/semver (semver)</summary>
###
[`v1.0.25`](https://redirect.github.com/dtolnay/semver/releases/tag/1.0.25)
[Compare
Source](https://redirect.github.com/dtolnay/semver/compare/1.0.24...1.0.25)
- Enable serde impls on play.rust-lang.org
([#​330](https://redirect.github.com/dtolnay/semver/issues/330),
thanks [@​jofas](https://redirect.github.com/jofas))
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xMDcuMCIsInVwZGF0ZWRJblZlciI6IjM5LjEwNy4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
The buttons are disabled in this case, but users can still trigger a
commit via the actions directly, and an error toast seems a bit loud for
this.
cc @iamnbutler
Release Notes:
- N/A
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [etagere](https://redirect.github.com/nical/etagere) | dependencies |
patch | `0.2.13` -> `0.2.15` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xMDcuMCIsInVwZGF0ZWRJblZlciI6IjM5LjEwNy4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR makes it so the `assistant2` feature flag is automatically
enabled for all staff.
Previously all the staff members had been opted in to the feature flag
manually (to allow for opting out), but I think we're ready to
unconditionally ship it to all staff.
Release Notes:
- N/A
This PR fixes an issue with the context picker where it would show
thread context as an option even if there was no `ThreadStore`
available.
Release Notes:
- N/A
This PR dedupes the construction of the `PromptBuilder`.
Previously this was constructed by both `assistant` and `assistant2`,
but now we construct it outside and pass it in.
Release Notes:
- N/A
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [indexmap](https://redirect.github.com/indexmap-rs/indexmap) |
workspace.dependencies | patch | `2.7.0` -> `2.7.1` |
---
### Release Notes
<details>
<summary>indexmap-rs/indexmap (indexmap)</summary>
###
[`v2.7.1`](https://redirect.github.com/indexmap-rs/indexmap/blob/HEAD/RELEASES.md#271-2025-01-19)
[Compare
Source](https://redirect.github.com/indexmap-rs/indexmap/compare/2.7.0...2.7.1)
- Added `#[track_caller]` to functions that may panic.
- Improved memory reservation for `insert_entry`.
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xMDcuMCIsInVwZGF0ZWRJblZlciI6IjM5LjEwNy4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
(Late) follow up to #9634.
Fixes#23395
Release Notes:
- Accepting completions while the cursor is in the middle of suggested
completion will now result in smaller edits being applied.
When a file exists in HEAD, is deleted in the index, and exists again in
the working copy, git produces two lines for it, one reading `D `
(deleted in index, unmodified in working copy), and the other reading
`??` (untracked). Merge these two into the equivalent of `DA`.
Release Notes:
- Improved handling of files that are deleted in the git index but exist
in HEAD and the working copy
This PR introduces a new entity called Project Tree which is responsible
for finding subprojects within a worktree;
a subproject is a language-specific subset of a worktree which should be
accurately tracked on the language server side. We'll have an ability to
set multiple disjoint workspaceFolders on language server side OR spawn
multiple instances of a single language server (which will be the case
with e.g. Python language servers, as they need to interact with
multiple disjoint virtual environments).
Project Tree assumes that projects of the same LspAdapter kind cannot
overlap. Additionally project nesting is not allowed within the scope of
a single LspAdapter.
Closes https://github.com/zed-industries/zed/issues/5108
Re-lands #22182 which I had to revert due to merging it into todays
Preview.
Release Notes:
- Language servers now track their working directory more accurately.
---------
Co-authored-by: João <joao@zed.dev>
This PR updates Assistant2's response streaming to work with LLM
providers that do not emit `StartMessage` events.
Now if we get a `Text` event without having received a `StartMessage`
event we will still insert an Assistant message so we can stream in the
response from the model.
Release Notes:
- N/A
This PR replaces the update debouncing code in the git panel with a more
correct and conventional structure (holding a `Task` field instead of
spawning a task that runs a loop). I wrote the code that this replaces
without realizing that it doesn't implement debouncing properly.
Release Notes:
- N/A
In the future if `filter` was used more this would fix other issues. In
the current code paths, this just fixes the particular corner case of
edit prediction arriving async while `y_flipped = true` (in this case it
needs to be scrolled down to show item with index 0).
Release Notes:
- N/A
Fixes an issue where the repo selector showed for all users, not just
those in the git_ui feature flag.
This was meant to be included in the `git_ui` feature flag.
Release Notes:
- N/A
This PR introduces a new entity called Project Tree which is responsible
for finding subprojects within a worktree;
a subproject is a language-specific subset of a worktree which should be
accurately tracked on the language server side. We'll have an ability to
set multiple disjoint `workspaceFolder`s on language server side OR
spawn multiple instances of a single language server (which will be the
case with e.g. Python language servers, as they need to interact with
multiple disjoint virtual environments).
Project Tree assumes that projects of the same LspAdapter kind cannot
overlap. Additionally **project nesting** is not allowed within the
scope of a single LspAdapter.
Closes#5108
Release Notes:
- Language servers now track their working directory more accurately.
---------
Co-authored-by: João <joao@zed.dev>
#23460 brought up we are showing the new "tab Accept" marker for single
line suggestions for non-zeta providers. We think this might be valid
for any provider, but we only want to enable it for zeta initially so it
doesn't affect an existing user base.
Release Notes:
- N/A
#23411 introduced an "Accept" callout for single line edits, but the
logic to detect them was incorrect causing it to trigger for multiline
insertions, this PR fixes that.
Release Notes:
- N/A
Closes#22653 again
In PR #23283, I thought that every `runnable` dispatched to the main
thread would correspond to an `EVENT_DISPATCHED` message in the message
queue. However, after testing, some `runnable`s occasionally weren’t
executed.
This PR updated the code as follows:
```rust
if let Ok(runnable) = self.main_receiver.try_recv() { <-- before
for runnable in self.main_receiver.drain() { <-- after
runnable.run();
}
```
This ensures that runnables are handled more proactively on the main
thread, now we handle `runnable`s with a much higher priority.
A big thanks to @MolotovCherry and @ArthurBrussee for their testing
efforts!
Release Notes:
- N/A
Considered doing this when previously working on completions menu
layout, as it brings the default selection position next to the cursor
position, and is generally more symmetrical. With #23445 there is now a
more compelling reason, as the "translucent, cropped bottom" display
doesn't make sense when displayed above.
Release Notes:
- N/A
The keymap error notifications got convoluted to support displaying the
notification on startup. This change addresses it systemically for all
future app notifications.
Reverts most of #20531, while keeping the fix to handle keyboard layout
switching. This is a better fix for #20531
Release Notes:
- N/A
This PR adjusts how the `AssistantPanelDelegate` global is set to be
based on the state of the feature flag.
This should prevent `assistant` and `assistant2` from potentially
clobbering each other.
Release Notes:
- N/A
This PR consolidates the two Assistant panels into one for users in the
`assistant2` feature flag.
Now that the Assistant1 prompt editor is accessible through the
Assistant2 panel, we no longer have a need to show both panels.
Release Notes:
- N/A
Add `editor:: SwapSelectionEnds ` action which swaps the cursor location from the beginning/end of a given selection.
Renamed from `editor::ExchangeMark` to `editor::SwapSelectionEnds`.
Unbound by default, bound to `ctrl-x ctrl-x` in Emacs keymap.
This PR adds a rough-and-ready picker for selecting which of the
project's repositories the git panel should display.
Release Notes:
- N/A
---------
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
Co-authored-by: Nate <nate@zed.dev>
This PR extracts the `ContextEditor` to the `assistant_context_editor`
crate.
As part of this, we have decoupled the `ContextEditor` from the
`AssistantPanel`.
There is now an `AssistantPanelDelegate` that the `ContextEditor` uses
when it needs to interface with the Assistant panel.
Release Notes:
- N/A
This PR adds a new `assistant_context_editor` crate.
This will ultimately house the `ContextEditor` so that it can be
consumed by both `assistant` and `assistant2`.
For the purposes of this PR, we just introduce the crate and move some
supporting constructs to it, such as the `ContextStore`.
Release Notes:
- N/A
This PR removes the `paths-ignore` for docs again, as it causes
docs-only PRs to be unmergable in combination with required status
checks (which we need in order to support merge-when-ready).
We can put these back if and only if we come up with a solution for how
to make it work with required status checks.
Release Notes:
- N/A
This PR extracts the `ContextEditor` and `ContextHistory`
implementations into their own modules so that it's clearer which parts
depend on other constructs in the `assistant` crate.
Release Notes:
- N/A
This PR changes the `GitPanel` and `GitState` to use a
`language::Buffer` for the commit message. This is a small initial step
toward remote editing and collaboration support.
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
* Remove `NotificationHandle` trait in favor of just passing `AnyView` -
id field wasn't used.
* Remove `show_notification_once`, doesn't seem to be needed for its
only use.
Release Notes:
- N/A
## Problem
When developing extensions locally, developers will commonly put their
source code in a specific directory. Zed uses this directory to create a
symlink starting from `$HOME/Library/Application
Support/Zed/extensions/installed` (MacOS path). When a developer then
moves this source code and tries to reinstall the extension, Zed will
fail with an unhelpful message (you can check the #Testing section).
## Change Summary
With this PR, we fix this behaviour by handling broken symlinks
specifically when returning the metadata on `fs::metadata`. Today, we
1. Pull the symlink metadata.
2. Return it if the file was not a symlink OR if it is, pull the
metadata for the pointed file.
After this change gets merged, we return the Symlink metadata if the
symlink is broken. This makes the symlink be recreated since we remove
the symlink either way.
## Risks associated with this change
It's possible changing this behaviour will show additional cases where
we are handling broken symlinks incorrectly. I expect this to be a
better scenario AND backwards compatible. We have the same behaviour we
had for 1. existing symlinks 2. normal files.
## Testing
The way I have been reproducing this is by having a private extension of
my own. I install it using the `zed: install dev extension` command
after running `RUST_LOG=debug RUST_BACKTRACE=1 scripts/zed-local -1`.
Then I move the extension to a different directory.
Zed will now keeps a broken link on its `installed` directory:
```
❯ ll
Permissions Size User Date Modified Name
lrwxr-xr-x@ - enrikes 24 Dec 12:15 brazil-config-zed-extension -> /Volumes/workplace/BrazilConfigZedExtension
drwxr-xr-x@ - enrikes 5 Dec 14:48 java
drwxr-xr-x@ - enrikes 12 Dec 13:04 kotlin
drwxr-xr-x@ - enrikes 25 Oct 08:13 rose-pine-theme
```
Before the patch, Zed shows on its logs:
```
2024-12-24T16:44:02+01:00 INFO extension::extension_builder] compiled Rust extension /Users/enrikes/Documents/BrazilConfigZedExtension
[2024-12-24T16:44:02+01:00 INFO extension::extension_builder] compiling grammar brazil_config for extension /Users/enrikes/Documents/BrazilConfigZedExtension
[2024-12-24T16:44:02+01:00 INFO extension::extension_builder] checking out brazil_config parser
[2024-12-24T16:44:04+01:00 INFO extension::extension_builder] compiling brazil_config parser
[2024-12-24T16:44:05+01:00 INFO extension::extension_builder] compiled grammar brazil_config for extension /Users/enrikes/Documents/BrazilConfigZedExtension
[2024-12-24T16:44:05+01:00 INFO extension::extension_builder] finished compiling extension /Users/enrikes/Documents/BrazilConfigZedExtension
[2024-12-24T16:44:05+01:00 ERROR extensions_ui] No such file or directory (os error 2)
Stack backtrace:
0: std::backtrace_rs::backtrace::libunwind::trace
at /rustc/eeb90cda1969383f56a2637cbd3037bdf598841c/library/std/src/../../backtrace/src/backtrace/libunwind.rs:116:5
1: std::backtrace_rs::backtrace::trace_unsynchronized
at /rustc/eeb90cda1969383f56a2637cbd3037bdf598841c/library/std/src/../../backtrace/src/backtrace/mod.rs:66:5
2: std::backtrace::Backtrace::create
at /rustc/eeb90cda1969383f56a2637cbd3037bdf598841c/library/std/src/backtrace.rs:331:13
3: anyhow::error::<impl core::convert::From<E> for anyhow::Error>::from
at /Users/enrikes/.cargo/registry/src/index.crates.io-6f17d22bba15001f/anyhow-1.0.94/src/backtrace.rs:27:14
4: <core::result::Result<T,F> as core::ops::try_trait::FromResidual<core::result::Result<core::convert::Infallible,E>>>::from_residual
at /rustc/eeb90cda1969383f56a2637cbd3037bdf598841c/library/core/src/result.rs:1989:27
5: <fs::RealFs as fs::Fs>::metadata::{{closure}}
at ./crates/fs/src/fs.rs:603:13
```
After the patch, the extension is installed and the symlink replaced for
a new one pointing to the user's directory choice.
```
2024-12-24T16:53:33.916022+01:00 [INFO] compiled Rust extension /Users/enrikes/Documents/BrazilConfigZedExtension
2024-12-24T16:53:33.916094+01:00 [INFO] compiling grammar brazil_config for extension /Users/enrikes/Documents/BrazilConfigZedExtension
2024-12-24T16:53:33.916225+01:00 [INFO] checking out brazil_config parser
2024-12-24T16:53:35.481602+01:00 [INFO] compiling brazil_config parser
2024-12-24T16:53:35.964189+01:00 [INFO] compiled grammar brazil_config for extension /Users/enrikes/Documents/BrazilConfigZedExtension
2024-12-24T16:53:35.964319+01:00 [INFO] finished compiling extension /Users/enrikes/Documents/BrazilConfigZedExtension
2024-12-24T16:53:36.213608+01:00 [INFO] rebuilt extension index in 39.108542ms
2024-12-24T16:53:36.213835+01:00 [INFO] extensions updated. loading 0, reloading 1, unloading 0
2024-12-24T16:53:36.375928+01:00 [INFO] rebuilt extension index in 34.478167ms
2024-12-24T16:53:36.376054+01:00 [INFO] extensions updated. loading 0, reloading 1, unloading 0
```
and
```
❯ ll
lrwxr-xr-x@ - enrikes 24 Dec 16:53 brazil-config-zed-extension -> /Users/enrikes/Documents/BrazilConfigZedExtension
drwxr-xr-x@ - enrikes 5 Dec 14:48 java
drwxr-xr-x@ - enrikes 12 Dec 13:04 kotlin
drwxr-xr-x@ - enrikes 25 Oct 08:13 rose-pine-theme
```
Release Notes:
- Fix broken symlinks when installing dev extensions
---------
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
Reworks https://github.com/zed-industries/zed/pull/23030 and
https://github.com/zed-industries/zed/pull/15087
Closes https://github.com/zed-industries/zed/issues/23352
Closes https://github.com/zed-industries/zed/issues/23310
Zed's completion items use `label` from LSP completion items as a base
to show in the list:
d290da7dac/crates/project/src/lsp_store.rs (L4371-L4374)
Besides that, certain language plugins append `detail` or
`label_details.description` as a suffix:
d290da7dac/crates/languages/src/vtsls.rs (L178-L188)
Either of these 3 properties may return `\n` (or multiple) in it,
spoiling Zed's completion menu, which uses `UniformList` to render those
items: a uniform list uses common, minimum possible height for each
element, and `\n` bloats that overly.
Good approach would be to use something else:
https://github.com/zed-industries/zed/issues/21403 but that has its own
drawbacks and relatively hard to use instead (?).
We could follow VSCode's approach and move away all but `label` from
`CodeLabel.text` to the side, where the documentation is, but that does
not solve the issue with `details` having newlines.
So, for now, sanitize all labels and remove any newlines from them. If
newlines are found, also replace whitespace sequences if there's more
than 1 in a row.
Later, this approach can be improved similarly to how Helix and Zed's
inline completions do: rendering a "ghost" text, showing the
completion's edit applied to the editor.
Release Notes:
- Fixed completion labels becoming overly large due to LSP completion
items with newlines
Follow up to https://github.com/zed-industries/zed/pull/22658
This PR ensures the background and border color of a project panel entry
is exactly the same with one exception: if the item is focused, active,
and not with mouse down. The point is to not be able to see the border
at all given they're there to act sort of akin to CSS's `outline` (which
doesn't add up to the box model).
Please let me know if there is any edge case I either messed up here or
didn't account for.
https://github.com/user-attachments/assets/29c74f6a-b027-4d19-a7de-b9614f0d7859
Release Notes:
- N/A
This unblocks work on #22182; a single language server might actually be
required by multiple languages (think of e.g. C/C++,
Javascript/Typescript), in which case it doesn't make sense to use a
single grammar. We already use primary language of a buffer for
highlights and this PR makes this the only supported syntax highlighting
flavour for returned symbols.
Closes #ISSUE
Release Notes:
- N/A
If a suggested edit is a single character insert or a single line
deletion, we'll show the diff popover to make it stand out more.
Release Notes:
- N/A
Co-authored-by: Danilo <danilo@zed.dev>
Closes#22883
To fix the problem, we move `handle_rename_project_entry` from
`Worktree` to `LspStore` and register it there. This way it becomes
available both in local and headless projects and this avoids the
duplication.
Release Notes:
- Fixed renaming project entries in Remote Development
Also fixes issue introduced in #23113 where changes to keyboard layout
would not cause reload of keymap configuration.
Closes#20531
Release Notes:
- N/A
I've noticed an occasional error: `ignoring event C:\some\path\to\file
outside of root path \\?\C:\some\path`. This happens because UNC paths
always fail to match with non-UNC paths during operations like
`strip_prefix` or `starts_with`. To address this, I changed the types of
some key parameters to `SanitizedPath`. With this adjustment, FS events
are now correctly identified, and under the changes in this PR, the
`test_rescan_and_remote_updates` test also passes successfully on
Windows.
Release Notes:
- N/A
`@mention`ed files in assistant2 now get replaced by the full path of
the file in what gets sent to the model, while rendering visually as
just the filename (in a crease, so they can only be selected/deleted as
a whole unit, not character by character).
https://github.com/user-attachments/assets/a5867a93-d656-4a17-aced-58424c6e8cf6
Release Notes:
- N/A
---------
Co-authored-by: João Marcos <joao@zed.dev>
Co-authored-by: Conrad <conrad@zed.dev>
Closes#23015
Release Notes:
- Improved which keybindings are selected for display. Now later entries
within `bindings` will take precedence. The default keymaps have been
updated accordingly.
According to #23223, manually setting `RUSTFLAGS` env var overrides
settings in `.cargo/config.toml`. Since users possibly may set their own
`RUSTFLAGS` when building, this creates an avenue where builds may fail
for really strange reasons that are difficult to debug.
This PR adds notes to the troubleshooting section to avoid setting
`RUSTFLAGS`, and offers alternatives which do not conflict.
This problem most recently affected nightly CI builders since we had
been setting `RUSTFLAGS` in our workflows to enable custom things like
gles or compiling with a specific target cpu. PR #23117 caused builds to
fail unless they were compiled with `-C target-feature=+crt-static`,
which due to this issue the `RUSTFLAGS` env var we set overrode the
`config.toml` compile flags, causing our builds to fail.
Release Notes:
- N/A
Adds support for Cut, Copy, Paste, Undo, Redo, New, Open, Save, and Find
keys to the default keymap. These keys can be found on old keyboards,
but also custom layouts like
[Extend](https://dreymar.colemak.org/layers-extend.html).
Release Notes:
- Added support for the Cut, Copy, Paste, Undo, Redo, New, Open, Save,
and Find keys to the default keymap.
The output of `git status --porcelain=v1` includes untracked
directories, i.e. directories that have no tracked files beneath. Since
we have our own way of computing a "summary" status for each directory
in a repo, this is not helpful for Zed; and it interferes with our
handling of nested repos. So just skip these lines in the output.
Closes#23133
Release Notes:
- Fix project panel colors when one git repository is nested beneath
another
Add capture groups for builtin types, builtin attribute decorators,
class inheritance, function arguments and definition keywords.
Related to #14892
Release Notes:
- Improved syntax highlight for Python: new capture groups for
`@function.arguments`, `@function.kwargs`, `@type.class.inheritance`,
`@keyword.definition`, `@attribute.builtin` and `@type.builtin`.
Related issue: https://github.com/zed-industries/zed/issues/20167
Release Notes:
- Changed the default keybinding to accept partial inline completions
from `ctrl-right` to `ctrl-cmd-right` on macOS, because `ctrl-right` is
already bound to jump to the end of the line.
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Kirill <kirill@zed.dev>
Co-authored-by: Bennet <bennet@zed.dev>
When the user closes a tab, the tab switcher will now select the tab at
the same position. This feature is especially relevant for keyboard
users when you want to close multiple consecutive tabs with
`<Ctrl-Backspace>`.
Please see the discussion at
https://github.com/zed-industries/zed/discussions/22791 for full
motivation and the quick demo.
Release Notes:
- tab_switcher: Preserve selected position when tab is closed
Closes#22740
I haven't assigned any default keybindings to these actions because it
might conflict with existing OS bindings.
Preview:
https://github.com/user-attachments/assets/7c62cb34-2747-4674-a278-f0998e7d17f9
Release Notes:
- Added `workspace::ActivateNextWindow` and
`workspace::ActivatePreviousWindow` actions for cycling between windows.
This Pull Request introduces a new command `workspace: move focused
panel to next position` which finds the currently focused panel, if such
panel exists, and moves it to the next valid dock position, following
the order of `Left → Bottom → Right` and then starting again from the
left position.
In order to achieve this the following changes have been introduced:
* Add a new default implementation for `PanelHandle`, namely
`PanelHandle::move_to_next_position` which leverages
`PanelHandle::position`, `PanelHandle::position_is_valid` and
`PanelHandle::set_position` methods to update the panel's position to
the next valid position.
* Add a new method to the `workspace` module, `
move_focused_panel_to_next_position`, which is responsible for finding
the currently focused panel, if such a panel exists, and calling the
`move_to_next_position` method in the panel's handle.
* Add a new action to the `workspace` module,
`MoveFocusedPanelToNextPosition`, which is handled by the
`move_focused_panel_to_next_position` method.
Tests have also been added to the `workspace` module in order to
guarantee that the action is correctly updating the focused panel's
position.
Here's a quick video of it, in action 🔽https://github.com/user-attachments/assets/264d382b-5239-40aa-bc5e-5d569dec0734Closes#23115
Release Notes:
- Added new command to move the focused panel to the next valid dock
position – `workspace: move focused panel to next position` .
During my work on PR #22616, while trying to fix the
`test_reporting_fs_changes_to_language_servers` test case, I noticed
that we are currently handling paths using `String` in some places.
However, this approach causes issues on Windows.
This draft PR modifies `rebuild_watched_paths_inner` and
`glob_literal_prefix`. For example, take the `glob_literal_prefix`
function modified in this PR:
```rust
assert_eq!(
glob_literal_prefix("node_modules/**/*.js"),
"node_modules"
); // This works on Unix, fails on Windows
assert_eq!(
glob_literal_prefix("node_modules\\**\\*.js"),
"node_modules"
); // This works on Windows
assert_eq!(
glob_literal_prefix("node_modules\\**/*.js"),
"node_modules"
); // This fails on Windows
```
The current implementation treats path as `String` and relies on `\` as
the path separator on Windows, but on Windows, both `/` and `\` can be
used as separators. This means that `node_modules\**/*.js` is also a
valid path representation.
There are two potential solutions to this issue:
1. **Continue handling paths with `String`**, and on Windows, replace
all `/` with `\`.
2. **Use `Path` for path handling**, which is the solution implemented
in this PR.
### Advantages of Solution 1:
- Simple and direct.
### Advantages of Solution 2:
- More robust, especially in handling `strip_prefix`.
Currently, the logic for removing a path prefix looks like this:
```rust
let path = "/some/path/to/file.rs";
let parent = "/some/path/to";
// remove prefix
let file = path.strip_prefix(parent).unwrap(); // which is `/file.rs`
let file = file.strip_prefix("/").unwrap();
```
However, using `Path` simplifies this process and makes it more robust:
```rust
let path = Path::new("C:/path/to/src/main.rs");
let parent = Path::new("C:/path/to/src");
let file = path.strip_prefix(&parent).unwrap(); // which is `main.rs`
let path = Path::new("C:\\path\\to/src/main.rs");
let parent = Path::new("C:/path/to\\src\\");
let file = path.strip_prefix(&parent).unwrap(); // which is `main.rs`
```
Release Notes:
- N/A
---------
Co-authored-by: Kirill Bulatov <mail4score@gmail.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
|
[actions/upload-artifact](https://redirect.github.com/actions/upload-artifact)
| action | digest | `6f51ac0` -> `65c4c4a` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xMDcuMCIsInVwZGF0ZWRJblZlciI6IjM5LjEwNy4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR renames the constants and functions previously introduced in
PR#23283. Since the changes are within the GPUI crate, I renamed these
from `**_ZED_**` to `**_GPUI_**`.
Release Notes:
- N/A
* Collects and reports all parse errors
* Shares parsed `KeyBindingContextPredicate` among the actions.
* Updates gpui keybinding and action parsing to return structured
errors.
* Renames "block" to "section" to match the docs, as types like
`KeymapSection` are shown in `json-language-server` hovers.
* Removes wrapping of `context` and `use_key_equivalents` fields so that
`json-language-server` auto-inserts `""` and `false` instead of `null`.
* Updates `add_to_cx` to take `&self`, so that the user keymap doesn't
get unnecessarily cloned.
In retrospect I wish I'd just switched to using TreeSitter to do the
parsing and provide proper diagnostics. This is tracked in #23333
Release Notes:
- Improved handling of errors within the user keymap file. Parse errors
within context, keystrokes, or actions no longer prevent loading the key
bindings that do parse.
This PR fixes two visual issues, that were caused by the fact that we
were always painting the horizontal scrollbar even if there is no
horizontal scrolling possible
Obscuring deleted lines when using the inline assistant:
https://github.com/user-attachments/assets/f8460c3f-403e-40a6-8622-65268ba2d875
Cutting off text even when horizontal scrolling is not possible:
https://github.com/user-attachments/assets/23c909f7-1c23-4693-8edc-40a2f089d4a8
This issue was only present in some themes (e.g. Nord, Catpuccin)
Closes#22716
Release Notes:
- Fixed an issue where horizontal scrollbars of editors would always be
painted (even if there is no horizontal scrolling to be done)
https://github.com/user-attachments/assets/78db908e-cfe5-4803-b0dc-4f33bc457840
* starts to extract usernames out of `users/` GitHub API responses, and
pass those along with e-mails in the collab sessions as part of the
`User` data
* adjusts various prefill and seed test methods so that the new data can
be retrieved from GitHub properly
* if there's an active call, where guests have write permissions and
e-mails, allow to trigger `FillCoAuthors` action in the context of the
git panel, that will fill in `co-authored-by:` lines, using e-mail and
names (or GitHub handle names if name is absent)
* the action tries to not duplicate such entries, if any are present
already, and adds those below the rest of the commit input's text
Concerns:
* users with write permissions and no e-mails will be silently omitted
— adding odd entries that try to indicate this or raising pop-ups is
very intrusive (maybe, we can add `#`-prefixed comments?), logging seems
pointless
* it's not clear whether the data prefill will run properly on the
existing users — seems tolerable now, as it seems that we get e-mails
properly already, so we'll see GitHub handles instead of names in the
worst case. This can be prefilled better later.
* e-mails and names for a particular project may be not what the user
wants.
E.g. my `.gitconfig` has
```
[user]
email = mail4score@gmail.com
# .....snip
[includeif "gitdir:**/work/zed/**/.git"]
path = ~/.gitconfig.work
```
and that one has
```
[user]
email = kirill@zed.dev
```
while my GitHub profile is configured so, that `mail4score@gmail.com` is
the public, commit e-mail.
So, when I'm a participant in a Zed session, wrong e-mail will be
picked.
The problem is, it's impossible for a host to get remote's collaborator
git metadata for a particular project, as that might not even exist on
disk for the client.
Seems that we might want to add some "project git URL <-> user name and
email" mapping in the settings(?).
The design of this is not very clear, so the PR concentrates on the
basics for now.
When https://github.com/zed-industries/zed/pull/23308 lands, most of the
issues can be solved by collaborators manually, before committing.
Release Notes:
- N/A
It's easy to overshoot the bottom of the tooltip when cursoring to a
button, such as opening the commit from a blame tooltip. Before this
change the tooltip would immediately disappear, and now it sticks around
for a bit.
Also:
* Shares the implementation with `elements/text.rs`. This will
particularly be handy when it makes use of hoverable tooltips.
* Improves the fix to #21657.
- Now the element will no longer think it has an active tooltip that it
registers with the window.
- It will instead display the next available tooltip, whereas I believe
before the next available tooltip would be suppressed.
* Fixes bug where `cx.refresh()` wasn't called when text tooltip is
hidden due to a mouse down event.
* Ports over fix in https://github.com/zed-industries/zed/pull/14832 to
`elements/text.rs`
Release Notes:
- The tooltip for inline git blame now waits a bit before disappearing
when the mouse leaves it.
Closes#4798
This PR implements a scrollbar for the terminal by turning
`ScrollableHandle` into a trait, allowing us to implement a custom
scroll handle, `TerminalScrollHandle`. It works by converting terminal
lines into pixels that `ScrollableHandle` understands. When
`ScrollableHandle` provides a changed offset (e.g., when you drag the
scrollbar), we convert this pixel offset back into the number of lines
to scroll and update the terminal content accordingly.
While the current version works as expected, I believe the scrollbar's
offset updates could potentially be turned into an event. This event
could then be subscribed to in `TerminalView`, not needing to update the
terminal's offset in the `render` method as it might have performance
implications. Further ideas on this are welcome.
Preview:
https://github.com/user-attachments/assets/560f0aac-4544-4007-8f0b-8833386f608f
Todo:
- [x] Experiment with custom scrollbar responding to terminal mouse
scroll
- [x] Refactor existing scrollbar handle into a trait
- [x] Update terminal to use the scrollbar trait instead of a custom
scrollbar implementation
- [x] Figure out how scrollbar events like mouse drag should notify the
terminal to update its state
- [x] Code clean up
- [x] Scrollbar hide setting for terminal
Release Notes:
- Added scrollbar to the terminal
Closes#22653
After some investigation, I found this bug is due to that sometimes
`foreground_task` is not dispatched to the main thread unless there is
user input. The current Windows implementation works as follows: when
the `WindowsDispatcher` receives a `foreground_task`, it adds the task
to a queue and uses `SetEvent(dispatch_event)` to notify the main
thread.
The main thread then listens for notifications using
`MsgWaitForMultipleObjects(&[dispatch_event])`.
Essentially, this is a synchronous method, but it is not robust. For
example, if 100 `foreground_task`s are sent, `dispatch_event` should
theoretically be triggered 100 times, and
`MsgWaitForMultipleObjects(&[dispatch_event])` should receive 100
notifications, causing the main thread to execute all 100 tasks.
However, in practice, some `foreground_task`s may not get a chance to
execute due to certain reasons.
As shown in the attached video, when I don't move the mouse, there are
about 20-30 `foreground_task`s waiting in the queue to be executed. When
I move the mouse, `run_foreground_tasks()` is called, which processes
the tasks in the queue.
https://github.com/user-attachments/assets/83cd09ca-4b17-4a1f-9a2a-5d1569b23483
To address this, this PR adopts an approach similar to `winit`. In
`winit`, an invisible window is created for message passing. In this PR,
we use `PostThreadMessage` to directly send messages to the main thread.
With this implementation, when 100 `foreground_task`s are sent, the
`WindowsDispatcher` uses `PostThreadMessageW(thread_id,
RUNNABLE_DISPATCHED)` to notify the main thread. This approach enqueues
100 `RUNNABLE_DISPATCHED` messages in the main thread's message queue,
ensuring that each `foreground_task` is executed as expected. The main
thread continuously processes these messages, guaranteeing that all 100
tasks are executed.
Release Notes:
- N/A
* Increases width of notification message to remove a gap
* Puts the close button in the top right
Release Notes:
- N/A
Co-authored-by: Nate <nate@zed.dev>
This reverts commit 1b3b825c7f.
When debugging git diffs we found that this introduced a re-ordering of
messages sent to the LSP:
* User hits "format"
* Zed adjusts spacing, and sends "spaces changed" to the LSP
* Zed sends "format" to LSP
With the async approach here, the format request can now arrive before
the space changed request.
You can reproduce this with `test_strip_whitespace_and_format_via_lsp`
under some conditions.
Release Notes:
- N/A
- [x] Basic implementation
- [x] Disable commit buttons when committing is not possible (empty
message, no changes)
- [x] Upgrade GitSummary to efficiently figure out whether there are any
staged changes
- [x] Make CommitAll work
- [x] Surface errors with toasts
- [x] Channel shutdown
- [x] Empty commit message or no changes
- [x] Failed git operations
- [x] Fix added files no longer appearing correctly in the project panel
(GitSummary breakage)
- [x] Fix handling of commit message
Release Notes:
- N/A
---------
Co-authored-by: Nate <nate@zed.dev>
This PR restores the ability to publish the `html_to_markdown` crate
after #23291.
This crate is [published](https://crates.io/crates/html_to_markdown) to
crates.io so that it can be consumed by extensions.
Release Notes:
- N/A
This PR extracts the `PromptLibrary` out of the `assistant` crate and
moves it to the `prompt_library` crate.
The `PromptLibrary` is now decoupled from the specifics of the
`AssistantPanel` and `InlineAssistant`.
Release Notes:
- N/A
This enables having a dedicated color for the line number hover state.
That's relevant because line numbers can now be clicked to jump to
cursor location in multibuffers.
Release Notes:
- N/A
---------
Co-authored-by: João Marcos <marcospb19@hotmail.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [aws-config](https://redirect.github.com/smithy-lang/smithy-rs) |
dependencies | patch | `1.5.13` -> `1.5.14` |
| [aws-sdk-kinesis](https://redirect.github.com/awslabs/aws-sdk-rust) |
dependencies | minor | `1.55.0` -> `1.56.0` |
| [aws-sdk-s3](https://redirect.github.com/awslabs/aws-sdk-rust) |
dependencies | minor | `1.68.0` -> `1.69.0` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
👻 **Immortal**: This PR will be recreated if closed unmerged. Get
[config
help](https://redirect.github.com/renovatebot/renovate/discussions) if
that's undesired.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xMDcuMCIsInVwZGF0ZWRJblZlciI6IjM5LjEwNy4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
A recent change in #22730 (to reduce workspace serialization) means that
a dock "forgets" its active panel whenever it is closed. When opened
again, the change in #22346 (which establishes a panel activation order)
takes effect, always opening the highest-priority panel for that dock
instead of the panel the user previously manually activated.
The result is that if you have, say, the outline panel active on the
right dock, and toggle the dock closed and then back open again, the
assistant panel will always appear instead.
This PR reverts part of the change in #22730 to ensure a dock remembers
its active panel when it is closed.
Closes#22923.
Release Notes:
- Fixed an issue where docks did not remember the active panel.
Now we ensure that task output is fully drained and printed to Zed
terminal pane on task completion.
This change depends on a recent change to alacritty_terminal crate:
5e78d20c70.
Closes https://github.com/zed-industries/zed/issues/18342
Release Notes:
- Fixed missing task terminal output on Linux for short-running commands
Closes#23216
This crash happens in the `update_visible_entries` function, where we
calculate `ancestors` and `current_ancestor_depth`. `ancestors` is map
storing information about folded ancestors and `current_ancestor_depth`
is basically selected ancestor index in reverse order of visibility.
For example, before adding a new file or directory in `a/b/c`, the
`ancestors` might look like:
```jsonc
{
"entry_id_of_c": {
"current_ancestor_depth": 2, // "a" is selected
"ancestors": ["entry_id_of_a", "entry_id_of_b", "entry_id_of_c"]
}
}
```
When new file or directory is added to`a`, ancestors length is reduced,
as `a` now is not part of folded dir due to having multiple children.
But depth still remains the same as while calculating it, we use depth
from `old_ancestors` to preserve selection across renders. This causes
panic.
```jsonc
{
"entry_id_of_c": {
"current_ancestor_depth": 2, // wrong: use of old depth here causes panic
"ancestors": ["entry_id_of_b", "entry_id_of_c"] // correct: notice "a" is missing, as "a" now has multiple children
}
}
```
This PR fixes it by capping depth so it don't exceed `ancestors` array.
This preserves existing depth as well as handles our edge case.
Release Notes:
- Fixed crash when adding a new file or directory to the first folded
directory
Closes#22885Closes#12565
This doesn't yet add history in the command palette, which is painfully
missing.
Release Notes:
- vim: Added `:!`, `:<range>!` and `:r!` support
- vim: Added `!` operator in normal/visual mode
This PR resolves one part of issue #14496
In project panel, when dragging, if you hover over a directory for
~500ms, it now auto-expands so you can drag and drop into nested
directories.
Task cleanup is handled in these cases:
- Dragged onto a different entry.
- Dragged anywhere else, and the 500ms timer runs out (for example, out
of the project panel).
- Dropped onto any entry.
I don’t see any edge cases where task isn’t cleaned up after 500ms.
https://github.com/user-attachments/assets/19da0da1-f9e2-42df-8ee4-fab6dc9a185a
Release Notes:
- Added auto-expand for directories on hover for a while during
dragging.
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
|
[tree-sitter-css](https://redirect.github.com/tree-sitter/tree-sitter-css)
| workspace.dependencies | patch | `0.23.1` -> `0.23.2` |
---
### Release Notes
<details>
<summary>tree-sitter/tree-sitter-css (tree-sitter-css)</summary>
###
[`v0.23.2`](https://redirect.github.com/tree-sitter/tree-sitter-css/releases/tag/v0.23.2)
[Compare
Source](https://redirect.github.com/tree-sitter/tree-sitter-css/compare/v0.23.1...v0.23.2)
**NOTE:** Download `tree-sitter-css.tar.xz` for the *complete* source
code.
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xMDcuMCIsInVwZGF0ZWRJblZlciI6IjM5LjEwNy4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR extracts the streaming diff implementation to its own
`streaming_diff` crate.
It was duplicated between `assistant` and `assistant2`, but their
implementations were exactly the same (and I don't see a reason why they
would need to diverge).
Release Notes:
- N/A
To prepare for the introduction of folding in the git panel, these
codepaths need to work with the canonical source of all git status
entries, not just the ones that are visible in the panel.
Release Notes:
- N/A
---------
Co-authored-by: Nate <nate@zed.dev>
This PR adds a new `prompt_library` crate and extracts the `PromptStore`
and `PromptBuilder` to it.
Eventually we'll want to house the `PromptLibrary` itself in this crate,
but right now that involves untangling a few dependencies.
Release Notes:
- N/A
This PR moves the `SlashCommandWorkingSet` out of the `assistant` crate
and into `assistant_slash_command`.
This will unlock moving some things that depend on it out of the
`assistant` crate.
Release Notes:
- N/A
This PR makes the assistant 2 panel switch work with the keyboard via
the `cmd-e` keybinding.
Release Notes:
- N/A
---------
Co-authored-by: Agus Zubiaga <hi@aguz.me>
Makes pane::ReopenClosedItem (`cmd-shift-t` macos / `ctrl-shift-t`
linux) work in Project Panel and other non-`Pane` Dock contexts too
(Diagnostics, Outline, Git, Collab).
This PR removes the `SwitchWithLabel` component because we're adding
`label` as a method to `Switch`. Thus, we no longer need an extra
component just to append a label. Additionally, we're also adding
`keybinding` as a method.
Release Notes:
- N/A
---------
Co-authored-by: Agus Zubiaga <hi@aguz.me>
This is useful if we want to pass random strings as keybindings for any
component that takes one, so we can display them on the debug theme
preview pane.
Release Notes:
- N/A
Co-authored-by: Agus Zubiaga <hi@aguz.me>
While working on PR #23117, I noticed that the Windows runner in our CI
setup doesn't seem to respect the settings defined in
`.cargo/config.toml`. With @SomeoneToIgnore ’s help, Kirill and I
realized this issue isn’t limited to the Windows runner—all of our
runners disregard the configurations in `.cargo/config.toml`.
Later, @osiewicz suggested an excellent workaround. I conducted some
tests on PR #23117 and found that the solution works as intended.
Personally, I prefer using environment variables for global
configuration. However, according to the documentation
[here](https://doc.rust-lang.org/cargo/reference/config.html), it seems
that environment variables always override the settings in
`.cargo/config.toml`.
Release Notes:
- N/A
Motivation for this is using markdown for keymap error notifications in
#23113, but it also benefits the copied text of repl tables.
Release Notes:
- N/A
Falls back on notifying all workspaces if there isn't an active one.
This is to support notifying the user about keymap file errors in
#23113. It will also be useful for notifying about settings file errors.
Release Notes:
- N/A
First, parse the output of `git status --porcelain=v1` into a
representation that can handle the full "grammar" and doesn't lose
information.
Second, as part of pushing this throughout the codebase, expand the use
of the existing `GitSummary` type to all the places where status
propagation is in play (i.e., anywhere we're dealing with a mix of files
and directories), and get rid of the previous `GitSummary ->
GitFileStatus` conversion.
- [x] Synchronize new representation over collab
- [x] Update zed.proto
- [x] Update DB models
- [x] Update `GitSummary` and summarization for the new `FileStatus`
- [x] Fix all tests
- [x] worktree
- [x] collab
- [x] Clean up `FILE_*` constants
- [x] New collab tests to exercise syncing of complex statuses
- [x] Run it locally and make sure it looks good
Release Notes:
- N/A
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Conrad <conrad@zed.dev>
This PR adds the supporting infrastructure to support loading icon
themes defined by extensions.
Here's an example icon theme:
```json
{
"name": "My Icon Theme",
"author": "Me <me@example.com>",
"themes": [
{
"name": "My Icon Theme",
"appearance": "dark",
"file_icons": {
"gleam": { "path": "./icons/file_type_gleam.svg" },
"toml": { "path": "./icons/file_type_toml.svg" }
}
}
]
}
```
The icon paths are resolved relative to the root of the extension
directory.
Release Notes:
- N/A
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [proc-macro2](https://redirect.github.com/dtolnay/proc-macro2) |
dependencies | patch | `1.0.92` -> `1.0.93` |
---
### Release Notes
<details>
<summary>dtolnay/proc-macro2 (proc-macro2)</summary>
###
[`v1.0.93`](https://redirect.github.com/dtolnay/proc-macro2/releases/tag/1.0.93)
[Compare
Source](https://redirect.github.com/dtolnay/proc-macro2/compare/1.0.92...1.0.93)
- Optimize TokenStream's Drop
([#​489](https://redirect.github.com/dtolnay/proc-macro2/issues/489),
[#​490](https://redirect.github.com/dtolnay/proc-macro2/issues/490),
thanks [@​WalkerKnapp](https://redirect.github.com/WalkerKnapp))
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4xMDcuMCIsInVwZGF0ZWRJblZlciI6IjM5LjEwNy4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR updates the various `FileIcons` methods to fall back to the
default icon theme if the active icon theme does not have the desired
icon.
Release Notes:
- N/A
This PR adds support for rendering `Icon`s from external files.
Previously this could only be used with icons embedded in the binary.
To achieve this we currently need to use the `img` element until the
`svg` element supports:
1. Loading SVGs from external files
2. Rendering polychrome SVGs
Release Notes:
- N/A
This PR dedupes the `AssistantSettings` so we can use the same settings
for both Assistant1 and Assistant2.
We originally forked them so we could change the Assistant2 settings
freely, but given our rollout strategy for the new Assistant, I don't
think that makes sense.
This also fixes the issue where the JSON language server would show a
"Matches multiple schemas when only one must validate" warning in
`settings.json`.
Closes#23171.
Release Notes:
- Fixed the "Matches multiple schemas when only one must validate"
warning for the `assistant` setting.
Closes https://github.com/zed-industries/zed/issues/7928
* uncomments and fixes all inlay hint cache tests
* fixes a bug, where invalidated range did not store the new queried
ranges in the cache: this resulted in extra requests in editor that do
not fit into the screen
* comments a peculiarity with the `RefreshInlayHints` event: all editors
react to that when a new language server is inserted, even though
certain editors are not related to the new language server
* fixes handling of inlay hints for the same position: now the same
order is kept, as in the language server's response
(https://github.com/zed-industries/zed/issues/7928)
* queries for hints when on excerpt(s) expansion
Release Notes:
- Fixed inlay hints handling for the same position
These checks were not functioning as intended. Notably tests were
skipped for today's hotfix release of Preview
[v0.169.2-pre](https://github.com/zed-industries/zed/actions/runs/12790602047):
Separately these checks were flawed as they would only be considered
"docs only" if the diff between the PR branch base and main also did not
have any subsequent non-docs changes.
Reverting until we can figure out something better.
Add `phi4` maximum context length (128K).
By default this clamps to `16384` but if you have enough video memory
you can set it higher or connect to a non-local machine via settings:
```json
"language_models": {
"ollama": {
"api_url": "http://localhost:11434",
"available_models": [
{
"name": "phi4",
"display_name": "Phi4 64K",
"max_tokens": 65536
}
]
}
}
```
Release Notes:
- Improve support for Phi4 with ollama.
Instead of eagerly calling `to_offset` on the anchor ranges for each
diagnostic in the direction of the search, work lazily in terms of
anchors and convert to offsets at the very end.
Release Notes:
- N/A
This fixes a bug that prevents unstaging added files.
I've also removed the batching/debouncing logic in the long-running task
that launches the git invocations---I added this originally but I don't
think it's really necessary.
Release Notes:
- N/A
This PR pulls the directory and chevron icons out of the
`IconTheme::file_icons` collection and promotes them to named fields.
This makes things less stringly-typed when looking up these icons.
Release Notes:
- N/A
This PR adds the initial concept of an `IconTheme` and refactors
`FileIcons` to use it to resolve the icons.
The `IconTheme` will ultimately be used to allow users to select a
different set of icons to use. Currently, however, this is just laying
the foundation for that work.
The association between file types and icons is now handled by the icon
theme when we resolve file icons. This mapping has been moved out of
`file_types.json` and into `icon_theme.rs`.
Release Notes:
- N/A
This PR adjusts the design of the assistant 2 threads with the goal of
reducing visual busyness. My intention is to remove the amount of lines
and borders given it is a relatively tight space. It also refines the
"generating" floating container style, finally leveraging linear
gradients that were recently added to GPUI! Now, we only display headers
for "you" messages. Assistant responses will be rendered right in the
panel; not bounded by a card container.
<img width="800" alt="Screenshot 2025-01-14 at 7 08 39 PM"
src="https://github.com/user-attachments/assets/a8ffa780-0ef2-4d4b-ae19-3f02fd2d63a6"
/>
Release Notes:
- N/A
- Reverts zed-industries/zed#22904
- See also: https://github.com/zed-industries/zed/issues/8580
After using it full-time for a day I very much think an implicit "mark
mode" when the emacs base keymap is enabled is the wrong approach.
Release Notes:
- Reverted "Add emacs keybindings for mark emulation" #23146 (main only)
- Clicking checkbox in the header stages or unstages all changes
- Adds tooltips to header checkbox
- Addis the ability for checkboxes to have tooltips
- Ensure an entry in the list is always selected
- Hide revert all button for now
Release Notes:
- N/A
This just opens the file for the selected `GitListEntry` right now;
we'll add back integration with the project diff view later.
Release Notes:
- N/A
---------
Co-authored-by: Nate <nate@zed.dev>
This PR makes it so the pending completion is cleared when an error
occurs.
This makes it so `Thread::is_streaming()` will return `false` in the
error case (and thus hide the streaming indicator in the UI).
Release Notes:
- N/A
Two issues i ran into while looking at the completion rating modal
- Single-file worktrees file names are not displayed at all
- Hard to see the filename when the path is long (lots of directories)
This PR fixes this by displaying the filename on the left, followed by
the full path (including the worktree name), similar to how we do it in
the file finder/assistant panel /file command
| Before | After |
|--------|--------|
| <img width="1067" alt="Screenshot 2025-01-14 at 16 09 05"
src="https://github.com/user-attachments/assets/628fde18-da9a-4d98-8ddf-ed0ab0cd8d35"
/> | <img width="1161" alt="Screenshot 2025-01-14 at 16 17 52"
src="https://github.com/user-attachments/assets/80c6a4e1-065d-4b0a-b9c0-5f3391af4557"
/> |
Release Notes:
- N/A
This fixes an error message that has shown up for me when joining collab
projects: "Unable to load shell environment in /<path on another
machine/"
Release Notes:
- Fixed error message about shell environment failing to load when
joining projects in collaboration.
Context pills are now focusable and intractable via the keyboard.
- <kbd>←</kbd> and <kbd>→</kbd> move the focus to the previous or next
item (wrapping if necessary)
- <kbd>↓</kbd> and <kbd>↑</kbd> move the focus vertically
- If the cursor is in the first/last row of the assistant/inline editor,
they will move the focus to the strip
- Inside the strip, they will move the focus to the pill horizontally
overlapping the most
- If already in the first/last row of the strip, they will move to the
first/last pill (like in editors)
- If the first/last pill is focused, they will move the focus back to
the editor
- <kbd>⌫</kbd> removes the focused pill (unless it's the suggested one)
- <kbd>⏎</kbd> accepts the suggested pill if focused
https://github.com/user-attachments/assets/040bc71c-a3ae-4961-9886-2d5c3d290a73
Release Notes:
- N/A
This PR adds settings for the Git Panel.
The new settings include:
| Setting | Description | Default |
|---------|-------------|---------|
| `git_panel.button` | Toggle visibility of the Git Panel button in the
status bar | `true` |
| `git_panel.dock` | Choose where to dock the Git Panel | `"left"` |
| `git_panel.default_width` | Set the default width of the Git Panel in
pixels | `360` |
| `git_panel.status_style` | Select how Git status is displayed |
`"icon"` |
| `git_panel.scrollbar.show` | Configure scrollbar behavior | Inherits
from editor settings |
Example usage:
```json
"git_panel": {
"button": true,
"dock": "left",
"default_width": 360,
"status_style": "icon",
"scrollbar": {
"show": "auto"
}
}
```
Release Notes:
- N/A
Various fixes for Zeta and one fix that's visible to non-Zeta-using
users of inline completions.
Release Notes:
- Changed inline completions (Copilot, Supermaven, ...) to not show up
in empty buffers.
---------
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Bennet <bennet@zed.dev>
This is a follow-up to #12640.
While profiling latency of working with a project with 8192 diagnostics
I've noticed that while we're parsing the LSP messages into a generic
message struct on a background thread, we can still block the main
thread as the conversion between that generic message struct and the
actual LSP message (for use by callback) is still happening on the main
thread.
This PR significantly constrains what a message callback can use, so
that it can be executed on any thread; we also send off message
conversion to the background thread. In practice new callback
constraints were already satisfied by all call sites, so no code outside
of the lsp crate had to be adjusted.
This has improved throughput of my 8192-benchmark from 40s to send out
all diagnostics after saving to ~20s. Now main thread is spending most
of the time updating our diagnostics sets, which can probably be
improved too.
Closes #ISSUE
Release Notes:
- Improved app responsiveness with huge # of diagnostics.
Follow-up of https://github.com/zed-industries/zed/pull/23112
Same reasoning applies.
Release Notes:
- Changed default formatter for C to be the primary language server, not
Prettier. Format-on-save is still disabled by default for C, but if one
uses the editor: format command now, it will default to the language
server. clangd can format C files, whereas prettier cannot.
As @hferreiro points out in [this
comment](https://github.com/zed-industries/zed/pull/18752#issuecomment-2589340565):
C++ and prettier don't work well together, so let's make the default
formatter for C++ the primary language server. We get that by disabling
prettier.
Release Notes:
- Changed default formatter for C++ to be the primary language server,
not Prettier. Format-on-save is still disabled by default for C++, but
if one uses the `editor: format` command now, it will default to the
language server. `clangd` can format C++ files, whereas prettier cannot.
This PR is a follow-up to
https://github.com/zed-industries/zed/pull/22911 to further improve the
registration of code action providers for the Assistant in order to
prevent duplicates.
The `CodeActionProvider` trait now has an `id` method that is used to
return a unique ID for a code action provider. We use this to prevent
registering duplicates of the same provider.
The registration of the code action providers for Assistant1 and
Assistant2 have also been reworked. Previously we were not call the
registration function—and thus setting up the subscriptions—until we
resolved the feature flags. However, this could lead to the registration
happening too late for existing workspace items.
We now perform the registration right away and then remove the undesired
code action providers once the feature flags have been resolved.
Release Notes:
- N/A
This PR fixes an issue with jumping from multi_buffer to a file; namely,
the scroll offset of the opened buffer used to match the position within
the multibuffer, but it broke a while back. This is because we were
opening a buffer without providing the data about the origin scroll
offset.
Closes #ISSUE
Release Notes:
- Fixed a bug where the relative position of an excerpt within the
multibuffer was not accounted for while jumping to the buffer, causing
the clicked line to drastically change position on screen.
The new `ContextMenu`-based `ContextPicker` requires initialization when
opened, but we were only doing this for the `ContextStrip` picker, not
the inline one.
Additionally, because we have a wrapper element around ContextMenu, we
need to propagate the `DismissEvent` so that it properly closes when
Escape is pressed.
Release Notes:
- N/A
These comments are inaccurate. Even if `convert_case` provided a way to
customize which boundaries were used (which is now does, it 0.7.1), they
would be removed from the string and replaced with the new boundary
character (`-`, `_`, ...), and we'd lose the ability to reconstruct the
text the way the author formatted it. This is not a hack, this is the
way we have to do it.
Release Notes:
- N/A
In current code this doesn't have benefit. In preparation for avoiding a
clone of workspace configuration. Having the interface this way may make
opportunities for efficiency clearer in the future
Release Notes:
- N/A
rust-analyzer does not support derive_macro expansion in attributes -
https://github.com/rust-lang/rust-analyzer/issues/8092. This could be
worked around via a proc_macro, but I think it'd be best to just require
docs for every action.
Release Notes:
- N/A
TODO:
- [ ] Investigate incorrect hit target for `stage all` button
- [ ] Add top level context menu
- [ ] Add entry context menus
- [x] Show paths in list view
- [ ] For now, `enter` can just open the file
- [ ] 🐞: Hover deadzone in list caused by scrollbar
- [x] 🐞: Incorrect status/nothing shown when multiple worktrees are
added
---
This PR continues work on the feature flagged git panel.
Changes:
- Defines and wires up git panel actions & keybindings
- Re-scopes some actions from `git_ui` -> `git`.
- General git actions (StageAll, CommitChanges, ...) are scoped to
`git`.
- Git panel specific actions (Close, FocusCommitEditor, ...) are scoped
to `git_panel.
- Staging actions & UI are now connected to git!
- Unify more reusable git status into the GitState global over being
tied to the panel directly.
- Uses the new git status codepaths instead of filtering all workspace
entries
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <53574922+cole-miller@users.noreply.github.com>
Co-authored-by: Cole Miller <cole@zed.dev>
Closes#23006
This PR should have been split into two, but since the changes are
related, I merged them into one.
1. On load, the title bar actions and bottom bar toggles are
unresponsive until the center pane is clicked. This happens because the
terminal captures focus (even if it's closed) long after the workspace
sets focus to itself during loading.
The issue was in the `focus_view` call used in the `new` method of
`TerminalPanel`. Since new terminal views can be created behind the
scenes (i.e., without the terminal being visible to the user), we
shouldn't handle focus for the terminal in this case. Removing
`focus_view` from the `new` method has no impact on the existing
terminal focusing logic. I've tested scenarios such as creating new
terminals, splitting terminals, zooming, etc., and everything works as
expected.
2. Currently, on load, docked terminals do not automatically focus when
they are only visible item to the user. This PR implements it.
Before/After:
1. When only the dock terminal is visible on load. Terminal is focused.
<img
src="https://github.com/user-attachments/assets/af8848aa-ccb5-4a3b-b2c6-486e8d588f09"
alt="image" height="280px" />
<img
src="https://github.com/user-attachments/assets/8f76ca2e-de29-4cc0-979b-749b50a00bbd"
alt="image" height="280px" />
2. When other items are visible along with the dock terminal on load.
Editor is focused.
<img
src="https://github.com/user-attachments/assets/d3248272-a75d-4763-9e99-defb8a369b68"
alt="image" height="280px" />
<img
src="https://github.com/user-attachments/assets/fba5184e-1ab2-406c-9669-b141aaf1c32f"
alt="image" height="280px" />
3. Multiple tabs along with split panes. Last terminal is focused.
<img
src="https://github.com/user-attachments/assets/7a10c3cf-8bb3-4b88-aacc-732b678bee19"
alt="image" height="270px" />
<img
src="https://github.com/user-attachments/assets/4d16e98f-9d7a-45f6-8701-d6652e411d3b"
alt="image" height="270px" />
Future:
When a docked terminal is in a zoomed state and Zed is loaded, we should
prioritize focusing on the terminal over the active item (e.g., an
editor) behind it. This hasn't been implemented in this PR because the
zoomed state during the load function is stale. The correct state is
received later via the workspace. I'm still investigating where exactly
this should be handled, so this will be a separate PR.
cc: @SomeoneToIgnore
Release Notes:
- Fixed unresponsive buttons on load until the center pane is clicked.
- Added auto-focus for the docked terminal on load when no other item is
focused.
These keybindings extend the already selected text. This allows closer
emacs emulation where subsequent movement commands extend / shrink the
current selection instead of dismissing it.
This is a follow up on
- #21927
Release Notes:
- Added emacs movement keybindings that extend/shrink the current
selection
---------
Co-authored-by: Peter Tripp <peter@zed.dev>
Also:
* Adds `impl_internal_actions!` for deriving the `Action` trait without
registering.
* Removes some deserializers that immediately fail in favor of
`#[serde(skip)]` on fields where they were used. This also omits them
from the schema.
Release Notes:
- Keymap settings file now has more JSON schema information to inform
`json-language-server` completions and info, particularly for actions
that take input.
I added these notifies in #23011, but in practive have found them to be
overly disruptive. It would definitely be good to do something better
than logging here, but having a sticky error notification is worse. I
think it is still good to notify on mutation failures, so left those in
In particular with rust-analyzer, "Go to definition" and "Find
references" frequently fail with "Content modified" quite a while after
sending the request. Since users are probably used to these operations
being finicky it doesn't seem useful to have a prominent display of
errors for them.
It seems the original author intended to write either "`ctrl+c` to copy"
or "`ctrl+v` to paste". Updated to be "`ctrl+v` to paste".
Release Notes:
- N/A
Co-authored-by: Michael Sloan <michael@zed.dev>
This adds support for LSPs that use the old rename flow which does not
first ask the LSP for the rename range and check that it is a valid
range to rename.
Closes#16663
Release Notes:
* Fixed rename symbols action when the language server does not have the
capability to prepare renames - such as `luau-lsp`.
Not sure why scroll was janky with `Autoscroll::newest()`, but this
appears to fix it. Probably better to conditionally do the autoscroll
requests anyway.
Release Notes:
- N/A
Closes#18737
Release notes:
- Improved LSP debug logs by defaulting to soft wrap and folding a
suffix of long lines. Also adds autoscroll, so if the cursor is on the
last line of the logs they will scroll like `tail`.
- Move function queries under constant queries to avoid uppercase
functions highlighted as constants
- Merge keywords and remove duplicates
- Highlights type aliases on import
- Highlights literal built-in types (null, undefined, true, false) as
`@type.builtin`
Confused about case-based queries, should they be rewritten?
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
This PR also removes the `ThumbsUp` action that wasn't being triggered
correctly. We didn't have it's counterpart `ThumbsDown`, too, so I
mostly assumed it would be harmless to remove `ThumbsUp` as well.
<img width="800" alt="Screenshot 2025-01-10 at 6 18 44 PM"
src="https://github.com/user-attachments/assets/9fd5da9f-9dff-454d-9f31-c02f1370b937"
/>
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
This PR makes it so we install `cargo-nextest` with `cargo install
cargo-nextest --locked` in CI.
According to the
[docs](https://nexte.st/docs/installation/from-source/), this is the
**only** supported way to install `cargo-nextest` when building from
source.
Release Notes:
- N/A
This PR removes some unneeded `#[allow(unused)]`s from the context types
in Assistant2.
We're using these fields now, so we no longer need to suppress the
unused lint.
Release Notes:
- N/A
Before this change, inline completion would displace the user's
selection. Unfortunately this brings less visibility to the inline
completion, I think a good solution to this will be to display a chunk
of the completion inline in the menu, and have a WIP change for that.
Since the current behavior is frustrating, not blocking this improvement
on that
Release Notes:
- N/A
Add a missing } in the multiple formatters example in the configuring
Zed section of the manual.
Release Notes:
- Fixed a missing } in the multiple formatters doc example
We weren't showing the keybinding in none of the places where the model
selector was visible. Also, I took advantage of the opportunity to
change the keybinding for two reasons:
1. `cmd-shift-m` caused conflict if on an editor (inline assistant case)
2. `cmd-opt-/` is the one Cursor uses; so consistency with something
that might be already consolidated sounds like a low-hanging fruit
| Editor Inline Assist | Terminal Inline Assist | Assistant Panel |
|--------|--------|--------|
| <img width="1336" alt="Screenshot 2025-01-10 at 11 01 24 AM"
src="https://github.com/user-attachments/assets/0782f217-025f-4bc0-b2fa-64b3524c968b"
/> | <img width="1336" alt="Screenshot 2025-01-10 at 11 01 29 AM"
src="https://github.com/user-attachments/assets/d05a3b5c-33fd-4593-b1d8-aa9944de816a"
/> | <img width="1336" alt="Screenshot 2025-01-10 at 11 01 33 AM"
src="https://github.com/user-attachments/assets/8cb075e7-ccde-46f5-aa05-d20a9d42b286"
/> |
Release Notes:
- N/A
The context picker will now display up to 6 recent files/threads to add
as a context:
<img
src="https://github.com/user-attachments/assets/80c87bf9-70ad-4e81-ba24-7a624378b991"
width=400>
Note: We decided to use a `ContextMenu` instead of `Picker` for the
initial one since the latter didn't quite fit the design for the
"Recent" section.
Release Notes:
- N/A
---------
Co-authored-by: Danilo <danilo@zed.dev>
Co-authored-by: Piotr <piotr@zed.dev>
Co-authored-by: Nathan <nathan@zed.dev>
Follow-up of https://github.com/zed-industries/zed/pull/22866
Added a config option to the markdown renderer to omit code copying
buttons, and used those for editor hover popovers.
Such popovers are quite frequent in language servers' hover responses,
e.g. rust-analyzer on `.clone()` hover may respond with
```
{"jsonrpc":"2.0","id":119,"result":{"contents":{"kind":"markdown","value":"\n```rust\nalloc::string::String\n```\n\n```rust\nfn clone(&self) -> Self\n```\n\n---\n\nReturns a copy of the value.\n\n# Examples\n\n```rust\nlet hello = \"Hello\"; // &str implements Clone\n\nassert_eq!(\"Hello\", hello.clone());\n```"},"range":{"start":{"line":518,"character":24},"end":{"line":518,"character":29}}}}
```
(note multiple code blocks sent)
Sounds that editor has either to use a different way to copy popover's
data (so the entire text gets copied, not just its code blocks), or at
least better handle hover popover's hovering to show the button.
Release Notes:
- N/A
* Now loads context on background threads.
- For file and directory context, buffer ropes can be shared between
threads as they are immutable. This allows for traversal and
accumulation of buffer text on a background thread.
- For url context, the request, parsing, and rendering is now done on a
background thread.
* Prepares for support of buffer reload by individually storing the text
of directory buffers.
* Avoids some string copying / redundant strings.
- When attaching message context, no longer builds a string for each
context type.
- For directory context, does not build a `SharedString` for the full
text, instead has a slice of `SharedString` chunks which are then
directly appended to the message context.
- Building a fenced codeblock for a buffer now computes a precise
capacity in advance.
Release Notes:
- N/A
I'm hoping this will bring more visibility to issues related to keeping
track of what version of code the LSP has:
* I've seen diagnostic ranges not appearing in the correct places.
* There have also been reports of edits from language servers
misapplying. This might bring more visibility to the issue - it doesn't
seem good to silently use the current version of the buffer.
Release Notes:
- N/A
Before this change it was using the same multibuffer point ranges in
every buffer, which only worked correctly for singleton buffers.
Release Notes:
- Fixed handling of selection ranges when formatting selections within a
multibuffer.
---------
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [aws-config](https://redirect.github.com/smithy-lang/smithy-rs) |
dependencies | patch | `1.5.11` -> `1.5.13` |
| [aws-sdk-kinesis](https://redirect.github.com/awslabs/aws-sdk-rust) |
dependencies | minor | `1.53.0` -> `1.55.0` |
| [aws-sdk-s3](https://redirect.github.com/awslabs/aws-sdk-rust) |
dependencies | minor | `1.66.0` -> `1.68.0` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
👻 **Immortal**: This PR will be recreated if closed unmerged. Get
[config
help](https://redirect.github.com/renovatebot/renovate/discussions) if
that's undesired.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS45Mi4wIiwidXBkYXRlZEluVmVyIjoiMzkuOTIuMCIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [bytemuck](https://redirect.github.com/Lokathor/bytemuck) |
dependencies | minor | `1.20.0` -> `1.21.0` |
---
### Release Notes
<details>
<summary>Lokathor/bytemuck (bytemuck)</summary>
###
[`v1.21.0`](https://redirect.github.com/Lokathor/bytemuck/compare/v1.20.0...v1.21.0)
[Compare
Source](https://redirect.github.com/Lokathor/bytemuck/compare/v1.20.0...v1.21.0)
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS45Mi4wIiwidXBkYXRlZEluVmVyIjoiMzkuOTIuMCIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [tempfile](https://stebalien.com/projects/tempfile-rs/)
([source](https://redirect.github.com/Stebalien/tempfile)) |
workspace.dependencies | minor | `3.14.0` -> `3.15.0` |
---
### Release Notes
<details>
<summary>Stebalien/tempfile (tempfile)</summary>
###
[`v3.15.0`](https://redirect.github.com/Stebalien/tempfile/blob/HEAD/CHANGELOG.md#3150)
[Compare
Source](https://redirect.github.com/Stebalien/tempfile/compare/v3.14.0...v3.15.0)
Re-seed the per-thread RNG from system randomness when we repeatedly
fail to create temporary files
([#​314](https://redirect.github.com/Stebalien/tempfile/issues/314)).
This resolves a potential DoS vector
([#​178](https://redirect.github.com/Stebalien/tempfile/issues/178))
while avoiding `getrandom` in the common case where it's necessary. The
feature is optional but enabled by default via the `getrandom` feature.
For libc-free builds, you'll either need to disable this feature or
opt-in to a different [`getrandom`
backend](https://redirect.github.com/rust-random/getrandom?tab=readme-ov-file#opt-in-backends).
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS45Mi4wIiwidXBkYXRlZEluVmVyIjoiMzkuOTIuMCIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR adds an error toast that will be displayed when installing a dev
extension fails.
Here's what it looks like:
<img width="1310" alt="Screenshot 2025-01-09 at 11 56 42 AM"
src="https://github.com/user-attachments/assets/b65eb9f9-c559-4b99-b64a-ee301fa9e443"
/>
<img width="1310" alt="Screenshot 2025-01-09 at 12 10 30 PM"
src="https://github.com/user-attachments/assets/f4880221-2ed9-4bb0-9d48-1cb29c2b483f"
/>
I did have to touch the workspace `ErrorMessagePrompt` component to make
it scroll for long messages. I don't anticipate this being a problem for
other classes of errors (if anything, I suspect other long errors will
become more usable now).
Closes#21237.
Release Notes:
- Added an error toast that is shown when a dev extension fails to
install.
This PR fixes the duplicated `Fix with Assistant` code actions that were
being shown in the code actions menu.
This fix isn't 100% ideal, as there is an edge case in buffers that are
already open when the workspace loads, as we may not observe the feature
flags in time to register the code action providers by the time we
receive the event that an item was added to the workspace.
Closes https://github.com/zed-industries/zed/issues/22400.
Release Notes:
- Fixed duplicate "Fix with Assistant" entries showing in the code
action list.
When displaying the number of matches in the branch picker during a
search, don't count the "create new branch" option as a match, since it
only appears when _no_ existing branches are found.
<img width="530" alt="Screenshot 2025-01-09 at 12 17 30"
src="https://github.com/user-attachments/assets/c4e6ac6f-d842-4b2f-a3af-ec28c9d90f0a"
/>
Closes#22905.
Release Notes:
- Fixed result count in branch picker searches.
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
This PR fixes the incorrect filename for the extension manifest being
used in an error message.
It should be `extension.toml` and not `extension.json`.
Release Notes:
- N/A
This PR is an alternate version of
https://github.com/zed-industries/zed/pull/22850, but now using a
similar approach to the existing `tab_content` and `tab_content_text`,
where `tab_tooltip_content` refers to the existing `tab_tooltip_text` if
there's no custom tooltip content/trait defined, meaning it will
simplify render the text/string content in this case.
This is all motivated by
https://github.com/zed-industries/zed/pull/21955, as we want to pull off
the ability to add custom content to a terminal tab tooltip.
Release Notes:
- N/A
This changes the behaviour of `<tab>` when inline completion is visible.
When the cursor is before the suggested indentation level, accepting a
completion should just indent.
cc @nathansobo @maxdeviant
Release Notes:
- Changed the behavior of `<tab>` at start of line when an inline
completion (Copilot, Supermaven, ...) is visible. If the cursor is
before the suggested indentation, `<tab>` now indents the line instead
of accepting the visible completion.
Co-authored-by: Antonio <antonio@zed.dev>
* Follows-up https://github.com/zed-industries/zed/pull/22224 , by
adjusting `impl PartialEq for OutlineEntryOutline` to compare outline
items' values too.
Before that, all outline items from the same excerpt were considered
equal.
Adds a test for this
* Stops re-revealing items in the outline panel, when it's focused: now,
when someone scrolls over outline panel items, there is no extra work
happening: the "revealed" item is the one scrolled to
Release Notes:
- Fixed outline items not scrolling properly
Update `suggest_edits` prompt to clarify usage of `<old_text>` when
using update/create operations using update/create operations.
- Add a mention that `old_text` is required for all but create.
- Change definition of `create` operation to also mean overwrite, as
some models heavily prefer rewrites.
- Remove mention of `If this tag is not specified, then the entire file
will be used as the range.` which is not current behavior.
Closes#22340
Release Notes:
- N/A (not sure if this requires a release note)
This one seems to be triggered when the assistant's
`View<ContextEditor>` is leased during the call into
`NavHistory::for_each_entry`, which then tries to read it again through
the `ItemHandle` interface. Fix it by skipping entries that can't be
read in the history iteration.
Release Notes:
- N/A
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [open](https://redirect.github.com/Byron/open-rs) | dependencies |
patch | `5.3.1` -> `5.3.2` |
---
### Release Notes
<details>
<summary>Byron/open-rs (open)</summary>
###
[`v5.3.2`](https://redirect.github.com/Byron/open-rs/blob/HEAD/changelog.md#532-2025-01-05)
[Compare
Source](https://redirect.github.com/Byron/open-rs/compare/v5.3.1...v5.3.2)
##### Bug Fixes
- <csr-id-c452a8c4e56c3726431d8a4a77ad910bc8ae3ecb/> fix `that_detached`
for UNC path of a directory
##### Commit Statistics
<csr-read-only-do-not-edit/>
- 3 commits contributed to the release over the course of 1 calendar
day.
- 51 days passed between releases.
- 1 commit was understood as
[conventional](https://www.conventionalcommits.org).
- 0 issues like '(#ID)' were seen in commit messages
##### Commit Details
<csr-read-only-do-not-edit/>
<details><summary>view details</summary>
- **Uncategorized**
- Merge pull request
[#​107](https://redirect.github.com/Byron/open-rs/issues/107) from
amrbashir/fix/windows/remove-unc-and-fallback-on-error
([`472ce26`](472ce262c8))
- Fix `that_detached` for UNC path of a directory
([`c452a8c`](c452a8c4e5))
- Merge pull request
[#​79](https://redirect.github.com/Byron/open-rs/issues/79) from
Byron/better-docs
([`2646ff8`](2646ff820c))
</details>
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS45Mi4wIiwidXBkYXRlZEluVmVyIjoiMzkuOTIuMCIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR adjusts the create billing subscription endpoint to prevent
initiating a checkout flow when a user has existing subscriptions that
are overdue.
A subscription is considered "overdue" when either:
- The status is `past_due`
- The status is `canceled` and the cancellation reason is
`payment_failed`
In Stripe, when a subscription has failed payment a certain number of
times, it is canceled with a reason of `payment_failed`. However, today
there is nothing stopping someone from simply creating a new
subscription without paying the outstanding invoices. With this change a
user will need to reconcile their outstanding invoices before they can
sign up for a new subscription.
Release Notes:
- N/A
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [serde_json](https://redirect.github.com/serde-rs/json) | dependencies
| patch | `1.0.134` -> `1.0.135` |
| [serde_json](https://redirect.github.com/serde-rs/json) |
workspace.dependencies | patch | `1.0.134` -> `1.0.135` |
---
### Release Notes
<details>
<summary>serde-rs/json (serde_json)</summary>
###
[`v1.0.135`](https://redirect.github.com/serde-rs/json/releases/tag/v1.0.135)
[Compare
Source](https://redirect.github.com/serde-rs/json/compare/v1.0.134...v1.0.135)
- Add serde_json::Map::into_values method
([#​1226](https://redirect.github.com/serde-rs/json/issues/1226),
thanks [@​tisonkun](https://redirect.github.com/tisonkun))
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about these
updates again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS45Mi4wIiwidXBkYXRlZEluVmVyIjoiMzkuOTIuMCIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR updates the `billing_subscriptions` in the database to record
the cancellation reason from Stripe.
We're primarily interested in this so we can check for subscriptions
that were canceled for being `past_due`.
Release Notes:
- N/A
Closes#18908
This PR started as a cleanup of redundant logic for setting up envs when
Zed is launched as a desktop entry on Linux. More on this can be read
[here](https://github.com/zed-industries/zed/pull/22335#issuecomment-2574726377).
The TLDR is that desktop entries on Linux sometimes might not have the
correct envs (as they don't `cwd` into your project directory). To
address this, we initially tried to fix it by loading the default shell
and its env vars.
However, a better solution, as recommended by @mrnugget, is to pass
`env` as `None`. Internally, if `env` is `None`, it falls back to the
project's working dir envs. This removes the need to manually load the
envs and is cleaner.
Additionally, it also fixes an issue with Zed not loading
project-specific envs because now we are actually doing so (albeit
unintentionally?).
I don't have macOS to test, but I believe this is not an issue on macOS
since it uses the Zed binary instead of the CLI, which essentially sets
the CLI `env` to `None` automatically.
Before:
Here, I have `/home/tims/go/bin` set up in `.envrc`, which only loads in
that project directory.
When launching Zed via the CLI in the project directory, notice
`/home/tims/go/bin` is in the `PATH`. As a result, we use the
user-installed `gopls` server.
```sh
[INFO] attempting to start language server "gopls", path: "/home/tims/temp/go-proj", id: 1
[INFO] using project environment variables from CLI. PATH="/home/tims/go/bin:/usr/local/go/bin"
[INFO] found user-installed language server for gopls. path: "/home/tims/go/bin/gopls", arguments: ["-mode=stdio"]
[INFO] starting language server process. binary path: "/home/tims/go/bin/gopls", working directory: "/home/tims/temp/go-proj", args: ["-mode=stdio"]
```
However, when using the desktop entry and attempting to load envs from
the default shell, notice `/home/tims/go/bin` is no longer there since
it's not in the project directory. Zed cannot find the user-installed
language server and starts downloading its own `gopls`.
```sh
[INFO] attempting to start language server "gopls", path: "/home/tims/temp/go-proj", id: 1
[INFO] using project environment variables from CLI. PATH="/usr/local/go/bin"
[INFO] fetching latest version of language server "gopls"
[INFO] downloading language server "gopls"
[INFO] starting language server process. binary path: "/home/tims/.local/share/zed/languages/gopls/gopls_0.17.1_go_1.23.4", working directory: "/home/tims/temp/go-proj", args: ["-mode=stdio"]
```
After:
When using the desktop entry, we pass the CLI env as `None`. For the
language server, it falls back to the project directory envs. Result,
Zed finds the user-installed language server.
```sh
[INFO] attempting to start language server "gopls", path: "/home/tims/temp/go-proj", id: 1
[INFO] using project environment variables shell launched in "/home/tims/temp/go-proj". PATH="/home/tims/go/bin:/usr/local/go/bin"
[INFO] found user-installed language server for gopls. path: "/home/tims/go/bin/gopls", arguments: ["-mode=stdio"]
[INFO] starting language server process. binary path: "/home/tims/go/bin/gopls", working directory: "/home/tims/temp/go-proj", args: ["-mode=stdio"]
```
Release Notes:
- Fixed issue with project-specific env not being found via .envrc
(direnv) on Linux
Fixes an incorrect error message.
Turns out it is impossible to set remote tracking to a branch that doesn't exist on the remote, so let's not even try.
Reverts #22834
Reverts #22614
Previously, to use a green and red shade with `TintColor` you'd need to
pass `Positive` and `Negative`, respectively. This terminology always
tripped me up, because, for example, I'd often try to use something
like:
```
Button::new("icon_color", "Negative")
style(ButtonStyle::Tinted(TintColor::Negative))
.color(Color::Error)
.icon_color(Color::Error)
.icon(IconName::Trash),
)
```
...and due to `icon_color` taking `Color::Error`, I'd always get
`TintColor` wrong at a first try, because I would, out of muscle memory,
write `TintColor::Error`, which wouldn't compile. That's exactly the
change in this PR—`TintColor` now takes `Success` and `Error` instead of
`Positive` and `Negative`, for more consistency.
Release Notes:
- N/A
We'll now show an error message if the user tries to add a directory
that contains no text files or when they try to add a single non-text
file.
Release Notes:
- N/A
---------
Co-authored-by: Danilo <danilo@zed.dev>
Before, the conversation popover menu covered up what you were typing
because it wasn't offset properly.
Now it's offset properly, using the UI font size so the amount of offset
scales with the font size:
<img width="435" alt="Screenshot 2025-01-07 at 4 34 27 PM"
src="https://github.com/user-attachments/assets/55e40910-8cd4-4548-b4fb-521eb2845775"
/>
<img width="454" alt="Screenshot 2025-01-07 at 4 33 58 PM"
src="https://github.com/user-attachments/assets/30350489-09f1-4cb8-9f95-ed4ee87bc110"
/>
<img width="488" alt="Screenshot 2025-01-07 at 4 34 18 PM"
src="https://github.com/user-attachments/assets/de60d990-2bd9-418d-a616-56beb3e4aa8a"
/>
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Goal: Allow zed to locate [`pixi`](https://github.com/prefix-dev/pixi)
environments
Changes:
- Uses a newer release of
[`python-environment-tools`](https://github.com/microsoft/python-environment-tools)
with the new `pet-pixi` create
- Adds `PythonEnvironmentKind::Pixi` as a possible environment kind, to
allow the rest of the code to detect the environment
I tested the changes locally. It found the correct pixi environment and
I was able to run `pytest` through the UI icon.
Release Notes:
- Added detection for pixi-environments
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
This fixes the issue described in this comment:
https://github.com/zed-industries/zed/pull/22439#issuecomment-2563896422
Essentially, we'd clip in the wrong direction when there were multi-line
inlay hints.
It also fixes inline completions for non-Zeta-providers showing up in
normal mode.
Release Notes:
- N/A
Co-Authored-By: Thorsten <thorsten@zed.dev>
Release Notes:
- Fix selected suggestion updating too many times when Zeta triggers
Co-authored-by: Thorsten <thorsten@zed.dev>
### Edit 1:
I tested it locally and it works!
### IMPORTANT:
**Feedback and suggestions for improvement are greatly appreciated!**
This commit introduces a new AnyQuotes text object to handle text
surrounded by single quotes ('), double quotes ("), or back quotes (`)
seamlessly. The following changes are included:
- Added AnyQuotes to the Object enum to represent the new feature.
- Registered AnyQuotes as an action in the actions! macro and register
function to ensure proper integration with Vim actions like ci, ca, di,
and da.
- Extended Object::range to check for surrounding single, double, or
back quotes sequentially.
- Updated methods like is_multiline and always_expands_both_ways to
ensure consistent behavior with other text objects.
- Added support in surrounding_markers to evaluate any of the quote
types when AnyQuotes is invoked.
- This enhancement provides users with a flexible and unified way to
interact with text objects enclosed by different types of quotes.
Release Notes:
- vim: Add `aq`/`iq` "any quote" text objects that are the smallest of
`a"`, `a'` or <code>a`</code>
fixed a bug where with the "show_whitespaces": "boundary" option, when
there was an "à" followed by a space, a white space was displayed, and
when "à" was at the end of the line, a white space was added
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes https://github.com/zed-industries/zed/issues/21613
Same as `bundle-linux`, to avoid panicking on missing licenses for
homegrown-built releases when `Help -> View dependency licenses` menu
action is triggered.
Release Notes:
- Altered bundle-mac script to generate licenses
This pr closes#21466 issue by disabling math in pulldown_cmark Parser.
The dollar sign symbol is used in pulldown_cmark Math extension, see
"Math in links" section for more details:
https://pulldown-cmark.github.io/pulldown-cmark/specs/math.html
I've tried another approach at first, without disabling math extension:
```
let iterator = TextMergeWithOffset::new(Parser::new_ext(text, options));
```
instead of current implementation
```
Parser::new_ext(text, options).into_offset_iter()
```
This way pulldown_cmark merges consecutive text events and this helps to
correctly parse links from plain text:
https://svelte.dev/docs/svelte/$state
But in this case the dollar sign still breaks markdown links:
\[https://svelte.dev/docs/svelte/$state](https://svelte.dev/docs/svelte/$state)
So in the end I disabled the math extension, it fixes both link formats.
See markdown/examples/markdown.rs to reproduce.
Release Notes:
- N/A
Ensuring all of the assistant 2 actions have keybindings.
Release Notes:
- N/A
---------
Co-authored-by: Agus Zubiaga <hi@aguz.me>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
I'm consistently getting the following error on startup:
```
2025-01-05T14:45:43.4602865+01:00 [ERROR] SHELL environment variable is not assigned so we can't source login environment variables
Caused by:
environment variable not found
```
The source function, `load_login_shell_environment`, assumes a UNIX
environment and should therefore not be called on Windows. (Unless you
are using git bash?)
Release Notes:
* N/A
This PR adds some intermediate bindings to the checks for if a
file/directory is already included to make the conditional a bit
clearer.
It wasn't immediately obvious what the boolean values corresponded to
when looking at it.
Release Notes:
- N/A
This PR makes it so the context is persistent in the thread, rather than
having to reattach it for each message.
This PR intentionally does not make an attempt to refresh the attached
context if it changes. That will come in a follow-up.
Release Notes:
- N/A
The most relevant change in this PR is ensuring that the path tooltip
doesn't overlap with the "Remove Context" tooltip. Now, the former
tooltip only shows if you hover over the context pill's label. This
avoids a little flicker that was happening as the path tooltip would
show first and then quickly followed by the icon button's one.
Release Notes:
- N/A
Closes#22659
More context can be found in attached issue.
This is specific to Windows:
1. Add parent directory watching for fs watch when the file doesn't
exist. For example, when Zed is first launched and `settings.json` isn't
there.
2. Add proper symlink handling for fs watch. For example, when
`settings.json` is a symlink.
This is exactly same as how we handle it on Linux.
Release Notes:
- Fixed an issue where items on the Welcome page could not be toggled on
Windows, either on first launch or when `settings.json` is a symlink.
Closes#9656. Continuation of #9654, but with the addition of backwards
compatibility for the existing captures.
Release Notes:
- Improved Tree-sitter support with added compatibility for standard
injections captures
---------
Co-authored-by: Finn Evers <finn.evers@outlook.de>
This is a follow-up to #22615 and fixes the issue of `alacritty`
resulting in broken shell/CLI apps if `alacritty` is not in the terminfo
database.
Closes #ISSUE
Release Notes:
- Set `TERM` to `xterm-256color` in Zed's built-in terminal
This makes the `RemoveFromProject` action to remove all marked entries
in the project panel instead of just the selected one.
Closes#22454
Release Notes:
- Improved the `RemoveFromProject` action to remove all selected items.
This PR is a small refactoring in advance of some other changes.
Previously we were storing the whole `Context` associated with each
message. However, it's likely that multiple messages may end up using
the same context.
We now store the deduped context in a separate collection and refer to
it from each message by its `ContextId`.
Release Notes:
- N/A
Context pills for files will now only display the basename of the file.
If two files have the same base name, we will also show their parent
directories, mimicking the behavior of editor tabs.
https://github.com/user-attachments/assets/ee88ee3b-80ff-4115-9ff9-8fe4845a67d8
Note: The double `/` in the file picker is a known separate issue.
Release Notes:
- N/A
---------
Co-authored-by: Danilo <danilo@zed.dev>
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Part of https://github.com/zed-industries/zed/issues/16472
Reduces amount of workspace serialization happening by:
* fixing the deserialization logic: now it does not set panels that are
hidden to active
* cleaning up `active_panel_index` for docks that are closed, to avoid
emitting extra events for such closed docks
* adjusting outline panel to drop active editor subscriptions on
deactivation — this way, `cx.observe` on the dock with outline panel is
not triggered (used to be triggered on every selection change before)
* adjusting workspace dock drag listener to remember previous
coordinates and only resize the dock if those had changed
* adjusting workspace pane event listener to ignore
`pane::Event::UserSavedItem` and `pane::Event::ChangeItemTitle` that
seem to happen relatively frequently but not influence values that are
serialized for the workspace
* not using `cx.observe` on docks, instead explicitly serializing on
panel zoom and size changes
Release Notes:
- Reduced amount of workspace serialization happening
Closes#17991
Release Notes:
- Set the `TERM` environment variable inside the terminal
Currently the terminal inherits the `TERM` variable from the parent
process. However this can cause issues with programs that rely on this
variable to make sure certain features are present. For example not
supporting backspaces making the terminal almost unusable.
Closes#22720
Release Notes:
- `ExpandExcerpts` (`shift+enter` by default) now expands all excerpts
that have selected text, rather than just excerpts that contain the end
of a selection.
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
|
[tree-sitter-python](https://redirect.github.com/tree-sitter/tree-sitter-python)
| workspace.dependencies | patch | `0.23.5` -> `0.23.6` |
---
### Release Notes
<details>
<summary>tree-sitter/tree-sitter-python (tree-sitter-python)</summary>
###
[`v0.23.6`](https://redirect.github.com/tree-sitter/tree-sitter-python/releases/tag/v0.23.6)
[Compare
Source](https://redirect.github.com/tree-sitter/tree-sitter-python/compare/v0.23.5...v0.23.6)
**NOTE:** Download `tree-sitter-python.tar.xz` for the *complete* source
code.
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS44NS4wIiwidXBkYXRlZEluVmVyIjoiMzkuODUuMCIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Closes#22655
A more detailed write-up for this change can be found in the issue
itself. Here, I'm just providing previews after the change. The preview
before the change can be found in the attached issue.
1. While selecting multiple entries, the last clicked entry should be
selected.
[a.webm](https://github.com/user-attachments/assets/2add69c3-82a9-4e45-92e8-366aaf9b298a)
2. When holding `Ctrl`/`Cmd` on an entry, there should be clear visual
feedback to indicate whether the entry is selected or marked.
[b.webm](https://github.com/user-attachments/assets/2cefb8aa-e7d0-4929-9efa-89a4329f428b)
3. When only one entry is marked, but it’s different from the selection,
operations should prioritize the selected entry. This let's you do quick
one-off actions without disrupting the marked state.
[c.webm](https://github.com/user-attachments/assets/8e7ae0c0-4387-49b9-9761-5d02a1c21a84)
4. When more than one entries are marked, operations should prioritize
the marked entries. If the selection differs from the marked entries, it
should not interfere with operations on the marked entries. This let's
you do actions on multiple marked entries without needing to adjust the
selection.
[d.webm](https://github.com/user-attachments/assets/165a74be-cbe9-48ac-b558-2562485ea224)
Release Notes:
- Improved project panel selection, copying, and deletion behavior, to
be more predictable.
Closes#22399
Currently, the target file is being trashed when trashing a symlink, and
the symlink remains intact. Symlinks are not handled separately yet, so
when `open` is used on a symlink, it gets resolved to the target file.
To fix this, we can get the file descriptor of the symlink by passing
`libc::O_PATH | libc::O_NOFOLLOW` flags to `open`, and then pass this
file descriptor to the existing `trash::trash_file` from `ashpd`.
However, this would result in an error because `ashpd` currently does
not support trashing symlink files. I have created an issue for it here:
[https://github.com/bilelmoussaoui/ashpd/issues/255](https://github.com/bilelmoussaoui/ashpd/issues/255).
For the time being, this PR partially fixes the issue by removing the
symlink without trashing so that the target file won't be affected. Once
the upstream bug is fixed, we can switch this remove action back to
trashing.
Release Notes:
- Fixed target file from being trashed when trashing symlink on Linux.
No issue, as the functionality is currently not being used in Zed. This
is more of a GPUI improvement.
Currently, `keyboard_layout` and `on_keyboard_layout_change` are already
handled on macOS. This PR implements the same for X11 and Wayland.
Linux supports up to 4 keyboard layout groups (e.g., Group 0: English
US, Group 1: Bulgarian, etc). On X11 and Wayland, `event` provides a new
active group, which maps to the `layout_index`. We already store keymap
state from where we can get the current `layout_index`. By comparing
them, we determine if the layout has changed.
X11:
<img
src="https://github.com/user-attachments/assets/b528db77-1ff2-4f17-aac5-7654837edeb9"
alt="x11" width="300px" />
Wayland:
<img
src="https://github.com/user-attachments/assets/2b4e2a30-b0f4-495c-96bb-7bca41365d56"
alt="wayland" width="300px" />
Release Notes:
- N/A
This is harmful for user experience and at best requires a user setting.
This was committed as part of
https://github.com/zed-industries/zed/pull/21739 however that change had
no relevant release notes and no relevant settings.
The issue #22343 shows how this can result in user experience
regression: deleting a text fragment can reinsert it back, and it's thus
unclear if the deletion has even worked. Maybe this can be reenabled in
some very restrictive setup, and put behind a setting, but it can't be
unconditional. Completions should activate when the user signals intent
of entering code - for example, if instead of `de` to delete a fragment,
I press `ce` to replace it, I would naturally expect inline completions
to show up.
Note: The linked PR added more code in vim crate to refresh inline
completions in normal mode. I'm keeping that code around in this commit,
so that this can be the minimal fix to the linked issue -- with the
assumption that maybe there's some way in the future to reenable this in
a subset of cases that don't result in confusing / broken UX. If that is
not true the code might need further cleanup. Let me know if you'd
rather see removal of those changes in this PR as well.
Closes#22343.
Release Notes:
- Fixes inline completions showing up in Vim normal mode.
`@attribute` is the very first query on the
https://zed.dev/docs/extensions/languages#syntax-highlighting captures
list, we should be using it! This PR changes the highlights queries for
HTML to use the `@attribute` capture instead of the `@property` capture
for `attribute_name` nodes.
Release Notes:
- N/A
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
The code we have assumes that when you run commands over ssh they run
in your home directory. This was not true in some cases, and broke SSH
remoting if you had `upload_binary_over_ssh` set.
To reproduce this use Coder and set the `dir` parameter.
Release Notes:
- Fixed SSH remoting in the case that ssh defaults to a non-$HOME
directory.
This PR adds some missing calls to clear the sub-collections in the
`ThreadStore` when we call `ThreadStore::drain` or `ThreadStore::clear`.
Release Notes:
- N/A
The existing code was causing us to constantly re-scan files when
anything changed in the project. Temporarily revert this as we're about
to rework this entire UI with the new primitives.
follow up to https://github.com/zed-industries/zed/pull/22329
Release Notes:
- N/A
---------
Co-authored-by: Cole <cole@zed.dev>
Based on the python https://github.com/zed-industries/zed/issues/21452
and PR https://github.com/zed-industries/zed/pull/22587
I found the same problem with go on windows.
Describe the bug / provide steps to reproduce it
Language server error: gopls
The system cannot find the file specified. (os error 2)
-- stderr--
[ERROR project::lsp_store] Failed to start language server "gopls": The
system cannot find the file specified. (os error 2)
[ERROR project::lsp_store] server stderr: ""
Environment
Windows 11
Go
Release Notes:
- Windows: Fixed `gopls` path construction on Windows 11.
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
These are more closely like default Emacs bindings.
I hope such small and minor changes didn't warrant a discussion in
advance.
Release Notes:
- Added Emacs bindings for creating a new window, closing a window, and
quitting zed entirely.
Added documentation explaining that clangd requires
`compile_commands.json` for proper functionality in both C and C++
projects. Includes instructions for generating the file using CMake.
This is related to
https://github.com/zed-industries/zed/discussions/6480
Release Notes:
- N/A
---------
Co-authored-by: Peter Tripp <peter@zed.dev>
Release Notes:
- Added support for Google's Gemini 2.0 Flash experimental model.
Note:
Weirdly enough the model is slow on small talk responses like 'hi' (in
my tests) but very fast on things that need more tokens like 'write me a
snake game in python'. Likely an API problem.
TESTED ONLY ON WINDOWS! Would test further but don't have Linux
installed and don't have an Mac. Will likely work everywhere.
Why?:
I think Gemini 2.0 Flash is incredibly good model at coding and
following instructions. I think it would be nice to have it in the
editor. I did as minimal changes as possible while adding the model and
streaming validation. I think it's worth merging the commits as they
bring good improvements.
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
This will allow the diagnostic popover to be displayed even if hovering
an invisible char.
Beyond that, it solves a rare `DiagnosticPopover` corner case:
* Supports moving the selection to a diagnostic when `GoToDiagnostic` is
done while hovering, based on `group_id`
* Provides Diagnostic values with `group_id: 0` providing information on
hover about invisible characters.
So, `GoToDiagnostic` would navigate to the very first error produced by
a language server. Really not a big deal of course.
Release Notes:
- N/A
Closes#22433
Before/After (macOS):
For some reason the non-blurred one seems much lower quality, so we may
need to tinker with the samples, or something else.
I'm unsure if this is a problem on Linux/in the Blade renderer, but
since no changes were made outside of the medal shaders we can probably
take this macOS-specific win for now.
Release Notes:
- gpui: Fixed an issue where shadows with a `blur_radius` of 0 would not
render.
This PR adds timeouts when resolving feature flags during workspace
panel initialization so that we don't block indefinitely if Zed is not
connected to the internet.
Right now we wait for 5 seconds, but this value was chosen arbitrarily.
Release Notes:
- N/A
- Closes: https://github.com/zed-industries/zed/issues/22699
- Refine the key binding for `cmd-shift-e` (macOS) / `ctrl-shift-e`
(linux)
- Now Works after closing the final buffer
- Now Works from other panels (Terminal/Assistant/Collab/Chat/etc)
Follow-up to:
- https://github.com/zed-industries/zed/pull/21228
Release Notes:
- Fixed Project Panel toggle (`cmd-shift-e` / `ctrl-shift-e`) so it
works in more contexts.
Namely, just removing the unnecessary extra line dividers and adding a
super subtle background color to the diagnostic message to create a bit
of separation/hierarchy.
<img width="800" alt="Screenshot 2025-01-04 at 9 46 03 PM"
src="https://github.com/user-attachments/assets/d62883b9-ed76-4fbb-b9c1-b55146eaeed4"
/>
Release Notes:
- N/A
This reverts commit 3ae6aa0e4d.
If "group_id = 0" really did mean a diagnostic not from a language
server then various methods related to diagnostic set would need to be
updated. Something like [this
diff](https://gist.github.com/mgsloan/e902153bcaec207b39260a8f40d3134d).
Plan instead is to use InfoPopover instead of DiagnosticPopover for
these.
Release Notes:
- N/A
No need to find or store the primary range ahead of time as it's found
by `activate_diagnostics`.
Not entirely sure we should still even have the special case when the
popover is visible. It does support the keyboard interaction of opening
hover followed by jumping to the primary position, but that seems pretty
undiscoverable.
Support for clicking the hover to navigate to the primary diagnostic was
removed in https://github.com/zed-industries/zed/pull/3408
Release Notes:
- N/A
Should resolve https://github.com/zed-industries/zed/issues/21714.
In some conditions that I'm not sure of, Zed sends LSP requests with
`start > end` position, and zls has an [assertion for end >=
start](f253553b82/src/offsets.zig (L492)),
and that causes zls to crash, like:
```bash
# first `textDocument/inlayHint` request with `end >= start`
[2025-01-05T19:33:09+00:00 TRACE lsp] outgoing message:{"jsonrpc":"2.0","id":1043,"method":"textDocument/inlayHint","params":{"textDocument":{"uri":"file:///Users/burak/Code/parzig/src/parquet/decoding.zig"},"range":{"start":{"line":0,"character":0},"end":{"line":24,"character":0}}}}
# successful response
[2025-01-05T19:33:09+00:00 TRACE lsp::input_handler] incoming message: {"jsonrpc":"2.0","id":1043,"result":[{"position":{"line":0,"character":9},"label":": type","kind":1,"paddingLeft":false,"paddingRight":false},{"position":{"line":1,"character":22},"label":": type","kind":1,"paddingLeft":false,"paddingRight":false},{"position":{"line":4,"character":13},"label":": [](unknown type)","kind":1,"paddingLeft":false,"paddingRight":false},{"position":{"line":4,"character":30},"label":"T:","kind":2,"tooltip":{"kind":"markdown","value":"```zig\ncomptime type\n```"},"paddingLeft":false,"paddingRight":true},{"position":{"line":4,"character":33},"label":"n:","kind":2,"tooltip":{"kind":"markdown","value":"```zig\nusize\n```"},"paddingLeft":false,"paddingRight":true},{"position":{"line":5,"character":23},"label":": bool","kind":1,"paddingLeft":false,"paddingRight":false},{"position":{"line":6,"character":19},"label":": usize","kind":1,"paddingLeft":false,"paddingRight":false},{"position":{"line":9,"character":26},"label":": [](unknown type)","kind":1,"paddingLeft":false,"paddingRight":false},{"position":{"line":9,"character":43},"label":"T:","kind":2,"tooltip":{"kind":"markdown","value":"```zig\ncomptime type\n```"},"paddingLeft":false,"paddingRight":true},{"position":{"line":9,"character":47},"label":"n:","kind":2,"tooltip":{"kind":"markdown","value":"```zig\nusize\n```"},"paddingLeft":false,"paddingRight":true},{"position":{"line":21,"character":13},"label":": [](unknown type)","kind":1,"paddingLeft":false,"paddingRight":false},{"position":{"line":21,"character":30},"label":"T:","kind":2,"tooltip":{"kind":"markdown","value":"```zig\ncomptime type\n```"},"paddingLeft":false,"paddingRight":true},{"position":{"line":21,"character":33},"label":"n:","kind":2,"tooltip":{"kind":"markdown","value":"```zig\nusize\n```"},"paddingLeft":false,"paddingRight":true},{"position":{"line":22,"character":33},"label":"T:","kind":2,"tooltip":{"kind":"markdown","value":"```zig\ncomptime type\n```"},"paddingLeft":false,"paddingRight":true},{"position":{"line":22,"character":36},"label":"buf:","kind":2,"tooltip":{"kind":"markdown","value":"```zig\n[]T\n```"},"paddingLeft":false,"paddingRight":true},{"position":{"line":22,"character":41},"label":"bit_width:","kind":2,"tooltip":{"kind":"markdown","value":"```zig\nu8\n```"},"paddingLeft":false,"paddingRight":true},{"position":{"line":22,"character":52},"label":"reader:","kind":2,"tooltip":{"kind":"markdown","value":"```zig\nanytype\n```"},"paddingLeft":false,"paddingRight":true}]}
[2025-01-05T19:33:09+00:00 TRACE lsp] Took 14.855ms to receive response to "textDocument/inlayHint" id 1043
# problematic `textDocument/inlayHint` request with `start > end`
[2025-01-05T19:33:09+00:00 TRACE lsp] outgoing message:{"jsonrpc":"2.0","id":1044,"method":"textDocument/inlayHint","params":{"textDocument":{"uri":"file:///Users/burak/Code/parzig/src/parquet/decoding.zig"},"range":{"start":{"line":50,"character":25},"end":{"line":25,"character":0}}}}
# zls crashes here, and after this point, all LSP requests fail
[2025-01-05T19:33:09+00:00 TRACE lsp] incoming stderr message:thread 5391652 panic: reached unreachable code
[2025-01-05T19:33:09+00:00 ERROR lsp] cannot read LSP message headers
```
In LSP specification for
[`Range`](https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#range)
type, it says:
> ... If you want to specify a range that contains a line including the
line ending character(s) then use an end position denoting the start of
the next line.
I feel like zls's assertion is sensible, so I've updated the generic
`range_to_lsp` function rather than doing something specific to zls. But
let me know if this seems incorrect.
zls was crashing after 5-10 minutes of working with a Zig codebase
before, and after this change, I tested for an hour and didn't
experience any crashes.
Release Notes:
- Ensure `end >= start` in `lsp::Range`, which should fix Zig/zls
crashes.
---------
Co-authored-by: Michael Sloan <michael@zed.dev>
In particular, `DiagnosticPopover` both:
* Supports moving the selection to a diagnostic when clicked, based on
`group_id`
* Provides Diagnostic values with `group_id: 0` providing informztion on
hover about invisible characters.
So, clicking such a popover would navigate to the very first error
produced by a language server. Really not a big deal of course, but
seems good to fix as it might result in surprising behavior in other
future circumstances
Release Notes:
- N/A
In #22620 `diagnostic_group` was modified to return results for
multibuffers, but was returning singleton buffer points. `hover_popover`
uses it to find the jump target for clicking the popup - which doesn't
seem to be working right now but that's a separate issue. Now that
`diagnostic_group` is returning values in multibuffers converting these
to anchors was crashing.
Also resolves a potential bug - if folding in multibuffers was supported
then "Go To Diagnostics" would not properly skip diagnostics from folded
regions.
Release Notes:
- N/A
Closes#15705
When opening a file from the terminal, if the file path is relative, we
attempt to guess all possible paths where the file could be. This
involves generating paths for each worktree, the current terminal
directory, etc. For example, if we have two worktrees, `dotfiles` and
`example`, and `foo.txt` in `example/a`, the generated paths might look
like this:
- `/home/tims/dotfiles/../example/a/foo.txt` from the `dotfiles`
worktree
- `/home/tims/example/../example/a/foo.txt` from the `example` worktree
- `/home/tims/example/a/foo.txt` from the current terminal directory
(This is already canonicalized)
Note that there should only be a single path, but multiple paths are
created due to missing canonicalization.
Later, when opening these paths, the worktree prefix is stripped, and
the remaining path is used to open the file in its respective worktree.
As a result, the above three paths would resolve like this:
- `../example/a/foo.txt` as the filename in the `dotfiles` worktree
(Ghost file)
- `../example/a/foo.txt` as the filename in the `example` worktree
(Ghost file)
- `foo.txt` as the filename in the `a` directory of the `example`
worktree (This opens the file)
This PR fixes the issue by canonicalizing these paths before adding them
to the HashSet.
Before:
After:
Release Notes:
- Fixed ghost files appearing in the project panel when clicking
relative paths in the terminal.
Closes https://github.com/zed-industries/zed/issues/22642
In Zed, Rust's label generators expected the details to come in ` (use
std.foo.Bar)` form, but recently, r-a started to send these details
without the leading whitespace which broke the code generation.
The PR makes LSP results parsing more lenient to work with both details'
forms.
Release Notes:
- Fixed Rust completion labels not showing the imports
- [x] Rewrite worktree git handling
- [x] Fix tests
- [x] Fix `test_propagate_statuses_for_repos_under_project`
- [x] Replace `WorkDirectoryEntry` with `WorkDirectory` in
`RepositoryEntry`
- [x] Add a worktree event for capturing git status changes
- [x] Confirm that the local repositories are correctly updating the new
WorkDirectory field
- [x] Implement the git statuses query as a join when pulling entries
out of worktree
- [x] Use this new join to implement the project panel and outline
panel.
- [x] Synchronize git statuses over the wire for collab and remote dev
(use the existing `worktree_repository_statuses` table, adjust as
needed)
- [x] Only send changed statuses to collab
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.com>
Co-authored-by: Nathan <nathan@zed.dev>
Closes#22607
Symlinks can be absolute or relative. When using
[stow](https://www.gnu.org/software/stow/) to manage dotfiles, it
creates relative symlinks to the target files.
For example:
- Original file: `/home/tims/dotfiles/zed/setting.json`
- Symlink path: `/home/tims/.config/zed/setting.json`
- Target path (relative to symlink): `../../dotfiles/zed/setting.json`
The issue is that you can’t watch the symlink path because it’s relative
and doesn't include the base path it is relative to. This PR fixes that
by converting relative symlink paths to absolute paths.
- Absolute path (after parent join):
`/home/tims/.config/zed/../../dotfiles/zed/setting.json` (This works)
- Canonicalized path (from absolute path):
`/home/tims/dotfiles/zed/setting.json` (This works too, just more
cleaner)
Release Notes:
- Fix issue where items on the Welcome page could not be toggled on
Linux when using Stow to manage dotfiles
Closes#22326
This PR adds process PID information to window created by X11, so that
window manager can identify which process this window belongs to.
Without this property, the window manager would have no reliable way to
know which process created this window.
In original issue, `robotgo` throws error on `x, y, w, h :=
robotgo.GetBounds(pid)` this method. If we go deeper into the source
code of `robotgo`, it calls `GetXidFromPid` which goes through all
windows, and tries to check for provided pid. Hence, when it tries to do
that for Zed, it fails and returns `0, err` to caller.
```go
// Robotgo source code trying to look through all windows and query pid
// GetXidFromPid get the xid from pid
func GetXidFromPid(xu *xgbutil.XUtil, pid int) (xproto.Window, error) {
windows, err := ewmh.ClientListGet(xu)
if err != nil {
return 0, err
}
for _, window := range windows {
wmPid, err := ewmh.WmPidGet(xu, window)
if err != nil {
return 0, err
}
if uint(pid) == wmPid {
return window, nil
}
}
return 0, errors.New("failed to find a window with a matching pid.")
}
```
Querying for pid for active Zed window:
Before:
```sh
tims@lemon ~/w/go-repro [127]> xprop -root _NET_ACTIVE_WINDOW
_NET_ACTIVE_WINDOW(WINDOW): window id # 0x4e00002
tims@lemon ~/w/go-repro> xprop -id 0x4e00002 _NET_WM_PID
_NET_WM_PID: not found.
```
After:
```sh
tims@lemon ~/w/go-repro> xprop -root _NET_ACTIVE_WINDOW
_NET_ACTIVE_WINDOW(WINDOW): window id # 0x4e00002
tims@lemon ~/w/go-repro> xprop -id 0x4e00002 _NET_WM_PID
_NET_WM_PID(CARDINAL) = 103548
tims@lemon ~/w/go-repro>
```
Correct zed process PID (below) assosiated with zed window (shown
above):
Release Notes:
- Fix `robotgo` failing when Zed window is open on Linux
Closes#22578
Currently, the `hovered` boolean in the window state is only updated by
the `WM_MOUSELEAVE` event, which fires when the mouse cursor leaves the
window's working area. This means that when the user moves the cursor
from the window to the title bar, `hovered` is set to `false`. Later in
the code, this flag is used to determine the cursor style and check if
the cursor is over the correct window.
The `hovered` boolean should remain active even when the mouse is over
non-client items, such as the title bar or window borders. This PR fixes
that by using `WM_NCMOUSELEAVE` event, which is triggered when the mouse
leaves non-client items. This event is used to update the `hovered`
boolean accordingly.
Now, `hovered` is `true` when the mouse is over the window's working
area, as well as non-client areas like the title bar.
More context:
- Existing: `dwFlags: TME_LEAVE` tracks window area mouse leaves, which
is used in `handle_mouse_move_msg` func.
- New: `dwFlags: TME_LEAVE | TME_NONCLIENT` tracks non-client mouse
leaves, which is used in `handle_nc_mouse_move_msg` func.
Preview:
https://github.com/user-attachments/assets/b319303f-81b9-45cb-bf0c-535a59b96561
Release Notes:
- Fix cursor style not changing on hover over items in the title bar on
Windows
Closes #ISSUE
- #21452
Describe the bug / provide steps to reproduce it
Language server error: pylsp
failed to spawn command. path:
"C:\Users\AppData\Local\Zed\languages\pylsp\pylsp-venv\bin\pylsp",
working directory: "D:\Coding\Python", args: []
-- stderr--
Environment
- Windows 11
- python
Release Notes:
- Windows: Fixed the path building used to run `pip` commands in the
venv generated on Windows 11.
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Removed a settings update that should have been removed in the 0.148.0
release.
I am not sure if there is a tracking issue, but I identified this check
for outdated settings that should not be needed anymore. I investigated
a bit and did not find any conflicts or UB as a result of removing this
code.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
This PR fixes an issue introduced in #21939 where the list of models in
the language model selector could be outdated.
Since we're no longer recreating the picker each render, we now need to
make sure we are updating the list of models accordingly when there are
changes to the language model providers.
I noticed it specifically in Assistant1.
Release Notes:
- Fixed a staleness issue with the language model selector.
This PR updates the `push_div` method in the `MarkdownElementBuilder` to
support taking in a `Stateful<Div>`.
This is some groundwork for supporting horizontal scrolling in Markdown
code blocks.
Release Notes:
- N/A
Closes#19837
This PR is a continuation of [linux: Implement
Menus](https://github.com/zed-industries/zed/pull/21873) and should only
be reviewed once the existing PR is merged.
I created this as a separate PR as the existing PR was already reviewed
but is yet to merge, and also it was my initial plan to do it in
separate parts because of the scope of it. This will also help reviewing
code faster.
This PR adds two new types of keyboard shortcuts to make menu navigation
easier:
1. `Alt + Z` for Zed, `Alt + F` for File, `Alt + S` for Selection, and
so on to open a specific menu with this combination. This mimics VSCode
and IntelliJ.
2. `Arrow Left/Right` when any menu is open. This will trigger the
current menu to close, and the previous/next to open respectively. First
and last element cycling is handled.
`Arrow Up/Down` to navigate menu entries is already there in existing
work.
https://github.com/user-attachments/assets/976aea48-4e20-4c19-850d-4d205a4bead2
Release Notes:
- Added keyboard navigation for menus on Linux (left/right). If you wish
to open menus with keyboard shortcuts add the following to your user
keymap:
```json
{
"context": "Workspace",
"bindings": {
"alt-z": ["app_menu::OpenApplicationMenu", "Zed"],
"alt-f": ["app_menu::OpenApplicationMenu", "File"],
"alt-e": ["app_menu::OpenApplicationMenu", "Edit"],
"alt-s": ["app_menu::OpenApplicationMenu", "Selection"],
"alt-v": ["app_menu::OpenApplicationMenu", "View"],
"alt-g": ["app_menu::OpenApplicationMenu", "Go"],
"alt-w": ["app_menu::OpenApplicationMenu", "Window"],
"alt-h": ["app_menu::OpenApplicationMenu", "Help"]
}
}
```
---------
Co-authored-by: Peter Tripp <peter@zed.dev>
This PR adds another example thread to showcase a response with long
lines of code.
This example will be helpful when working to make the code blocks scroll
horizontally instead of wrapping.
Release Notes:
- N/A
In `script/linux` file, in order to install build dependencies we check
ID and VERSION_ID fields of `/etc/os-release` file for installing
os-specific packages. The regex patterns for those fields are wrong
because there's no `"` character after `ID=` or `VERSION_ID=`. This
causes `grep` to fail.
So I extended the pattern by adding `"?` after each `"` character to
bypass the cause of failure.
Release Notes:
- N/A
Signed-off-by: thehxdev <hossein.khosravi.ce@gmail.com>
Set the git remote tracking branch when the new Preview branch is
created by `script/bump-zed-minor-versions`. This only impacts the local
git branch configuration of the user who runs this script.
Release Notes:
- N/A
Clicking buffer headers and line numbers would sometimes take you to a
disorienting scroll position. This PR improves that so the destination
line is roughly at the same Y position as it appeared in the
multibuffer.
https://github.com/user-attachments/assets/3ad71537-cf26-4136-948f-c5a96df57178
**Note**: The alignment won't always be perfect because the multibuffer
and target buffer might start at a different absolute Y position
(because of open search, breadcrumbs, etc). I wanted to compensate for
that, but that requires a fundamental change that I'd prefer to make
separately.
Release Notes:
- Fix vertical alignment when jumping from multibuffers
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [serde_json](https://redirect.github.com/serde-rs/json) | dependencies
| patch | `1.0.133` -> `1.0.134` |
| [serde_json](https://redirect.github.com/serde-rs/json) |
workspace.dependencies | patch | `1.0.133` -> `1.0.134` |
---
### Release Notes
<details>
<summary>serde-rs/json (serde_json)</summary>
###
[`v1.0.134`](https://redirect.github.com/serde-rs/json/releases/tag/v1.0.134)
[Compare
Source](https://redirect.github.com/serde-rs/json/compare/v1.0.133...v1.0.134)
- Add `RawValue` associated constants for literal `null`, `true`,
`false`
([#​1221](https://redirect.github.com/serde-rs/json/issues/1221),
thanks [@​bheylin](https://redirect.github.com/bheylin))
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about these
updates again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS44NS4wIiwidXBkYXRlZEluVmVyIjoiMzkuODUuMCIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR is a follow-up to #22200 that makes it so the chat panel icon is
visible when the chat panel is active, even if not in a call (when using
the `when_in_call` setting).
Release Notes:
- N/A
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [quote](https://redirect.github.com/dtolnay/quote) | dependencies |
patch | `1.0.37` -> `1.0.38` |
---
### Release Notes
<details>
<summary>dtolnay/quote (quote)</summary>
###
[`v1.0.38`](https://redirect.github.com/dtolnay/quote/releases/tag/1.0.38)
[Compare
Source](https://redirect.github.com/dtolnay/quote/compare/1.0.37...1.0.38)
- Support interpolating arrays inside of arrays using a repetition
([#​286](https://redirect.github.com/dtolnay/quote/issues/286))
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS44NS4wIiwidXBkYXRlZEluVmVyIjoiMzkuODUuMCIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Skip walking string for truncate when byte len is <= char limit
* Fix `truncate_and_remove_front` returning string that is `max_chars +
1` in length. Now more consistent with `truncate_and_trailoff` behavior.
* Fix `truncate_and_remove_front` adding ellipsis when max_chars == char
length
Release Notes:
- N/A
Closes#19974.
When a file is pasted in the project panel at a location where a file
with that name already exists, the new file's name is disambiguated by
appending " copy" at the end. This happens on the paste and the
duplicate actions, as well as when Alt-dragging files.
With this PR, this will now open the file rename editor with the
disambiguator pre-selected.
Open question:
With this PR's current implementation, this won't always work when
pasting multiple files at once. In this case, the file rename editor
only opens for the last pasted file, if that file was disambiguated. If
only other files were disambiguated instead, it won't open.
This roughly mimics the previous paste behaviour, namely that only the
last pasted file was selected.
I see two options here: If multiple files were pasted and some of them
were disambiguated, we could select and open the rename editor for the
last file that was actually disambiguated (easy), or we could open a
kind of multi-editor for all files (hard, but maybe a multi-rename
editor could actually be interesting in general...).
Release Notes:
- Open rename file editor if pasted file was disambiguated
This PR makes the docs-only check a no-op that defaults to `false` when
running in the merge queue.
I noticed that the current check did not work properly in the merge
queue, resulting in it always assuming a change was docs-only and not
running the requisite CI jobs.
Release Notes:
- N/A
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [swatinem/rust-cache](https://redirect.github.com/swatinem/rust-cache)
| action | digest | `82a92a6` -> `f0deed1` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS44NS4wIiwidXBkYXRlZEluVmVyIjoiMzkuODUuMCIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Closes#10325
Release Notes:
- Fixed an issue inside the integrated terminal where clicking on URLs
that started with `file://` would sometimes not work when the path
included a line number (e.g. `file:///Users/someuser/lorem.txt:221:22`)
This PR updates the scrollbar diagnostic setting to provide fine-grained
control over which indicators to show, based on severity level. This
allows the user to hide lower-severity diagnostics that can otherwise
clutter the scrollbar (for example, unused or disabled code).
The options are set such that the existing boolean setting has the same
effect: when `true` all diagnostics are shown, and when `false` no
diagnostics are shown.
Closes#22296.
Release Notes:
- Added fine-grained control of scrollbar diagnostic indicators.
This commit is all about strings, not about line layout at all. When
laying out text, we use a line layout cache to avoid roundtrips to
system layout engine where possible. This makes it so that we might end
up not needing an owned version of text to insert into the cache, as we
might get a cached version.
The API boundary of line layout accepted text to be laid out as &str. It
then performed cache lookup (which didn't require having an owned
version) and only resorted to making an owned version when needed. As it
turned out though, exact cache hits are quite rare and we end up needing
owned version more often than not. The callers of line layout either
dealt with SharedStrings or owned Strings. Due to coercing them into
&str, we were ~always copying text into a new string (unless there was a
same-frame-hit). This is a bit wasteful, thus this PR generifies the API
a bit to make it easier to reuse existing string allocations if there
are any.
Benchmark scenario: scrolling down page-by-page through editor_tests (I
ran the same scenario twice):
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/21657
Follow-up of https://github.com/zed-industries/zed/pull/22488
Previous PR broke git blame tooltips, which are expected to be open when
hovered, even if the mouse cursor is moved away from the actual blame
entry that caused the tooltip to appear.
Current version moves the invalidation logic into `prepaint_tooltip`,
where the new data about the tooltip origin is used to ensure we
invalidate only tooltips that have no mouse cursor in either origin
bounds or tooltip bounds (if it's hoverable).
Release Notes:
- Fixed tooltips getting stuck
- Little tweaks to wording and punctuation
- Remove redundancy on the Configuration and Key binding sections
- Ensure key bindings for the sections mentioned above appear
Release Notes:
- N/A
This reverts commit 344284e013.
That change broke git blame tooltips, as Zed should also show tooltips
which are hovered, even though the mouse had left the origin element's
bounds.
Release Notes:
- N/A
This pull request includes a small change to the
`crates/languages/src/markdown/config.toml` file. The change adds block
comment syntax for Markdown files.
*
[`crates/languages/src/markdown/config.toml`](diffhunk://#diff-4cf73d9af0f11f2ac8929bd8113ee76aa382dc96a731f18510c09fc3d0db1f9cR5):
Added block comment syntax `<!-- ` and ` -->` for Markdown files.
Closes https://github.com/zed-industries/zed/issues/19797
I have been testing it with the following:
1. create a simple markdown file containing following words
```markdown
good morning - English
Dzień dobry - polish
おはよう - japanese
صباح الخير - arabic
早安 - Chineses (Traditional)
```
2. comment using `cmd+/` and see if there are any errors
Release Notes:
- Added block comment syntax `<!-- ` and ` -->` for Markdown files.
Closes https://github.com/zed-industries/zed/issues/22469 — and, aside
from fixing that issue also took the opportunity to make the
`file_search` icon dimensions feel better in comparison the other icons
in the Project Search area.
Release Notes:
- N/A
For both the strings and paths multithreaded matching it would still
aggregate the response even though it is unneeded. It now checks cancel.
In the paths matcher, cancel is now checked within the loop, since it
was calling `match_candidates` even though no further results would be
computed.
Release Notes:
- N/A
* Removes `max_results` from the matcher interface as this is better
dealt with in consumers once all results are known. The current
implementation was quite inefficient as it was using binary search to
find insertion points and then doing an insert which copies the entire
suffix each time.
* There was a corner case where if the binary search found a match
candidate with the same score, it was dropped. Now fixed.
* Uses of `util::extend_sorted` when merging results from worker threads
also repeatedly uses binary search and insertion which copies the entire
suffix. A followup will remove that and its usage.
* Adds `util::truncate_to_bottom_n_sorted_by` which uses quickselect +
sort to efficiently get a sorted count limited result.
* Improves interface of Matcher::match_candidates by providing the match
positions to the build function. This allows for removal of the `Match`
trait. It also fixes a bug where the Match's own Ord wasn't being used,
which seems relevant to PathMatch for cases where scores are the same.
Release Notes:
- N/A
Part of https://github.com/zed-industries/zed/issues/22415
I've noticed that I cannot work with any Zig projects, as there were no
"go to definition", formatting and inlay hints.
After debugging, I've discovered that `typos` was registered as a first
language server, becoming the "primary" one for Zig.
That one does not have any proper capabilities, hence all corresponding
LSP requests were no-op.
While this solution is not ideal (I wonder, how many other set-ups are
broken due to the same thing?), we'd better fix things for now this way
at least.
Release Notes:
- Fixed `zls` not working properly when `typos` extension is installed
When switching from just running the editor directly to using the CLI I
missed the logs in the terminal and started using `--foreground`. I
realized this was because there was a tiny amount of effort involved in
finding out where logs were being written to. Having the cli output it
to stderr helps make this more visible.
Seems like such a minor thing not listing in release notes.
Release Notes:
- N/A
Hello,
This PR documents the `use_bundler` configuration option that was added
in https://github.com/zed-extensions/ruby/releases/tag/v0.3.3
**What it does?**
This option allows users to run `solargraph` and `rubocop` within the
context of Bundler, which is the most commonly used scenario in the Ruby
ecosystem. Ruby LSP is not configured to run in the context of Bundler
because it is recommended not to add it to the project dependencies
(https://shopify.github.io/ruby-lsp/composed-bundle.html). However, if
this is the case, the Ruby LSP can still be configured to run in the
context of Bundler via the same configuration option.
This configuration option has the following default values:
- `rubocop` - `use_bundler` is `true`.
- `solargraph` - `use_bundler` is `true`.
- `ruby-lsp` - `use_bundler` is `false`.
Release Notes:
- N/A
This means that `workspace::ToggleRightDock` will open the assistant if
no right-dock panel has been manually activated, instead of the chat as
before. Also cleans up the `active_panel_index` logic a bit.
cc @nathansobo
Release Notes:
- Make `workspace::ToggleRightDock` open the assistant panel if no
right-dock panel has yet been activated
Changes:
- [x] Increase expand affordance surface area
- [x] Ensure expand buttons have tooltips with keybindings
- [x] Make line numbers clickable to jump you to location (only in
multibuffers)
- [x] Hide the "Jump To File" element in not-focused excerpts
Before merging it:
- [x] Fix off-by-one header focus styles glitch
Improvements to consider for follow-up PRs:
1. Experiment with increasing the width of the clickable surface area
for line numbers
2. Don't show (or disable) the "expand excerpt" button when at the top
or bottom edge of the file
3. Once you jump to location, centralize the cursor scroll position
Release Notes:
- Improved multibuffer's "expand excerpt" affordance
- Fixed "jump to file/location" and "expand excerpt" keybinding display
- Made clicking on line numbers in multibuffers jump you to cursor
location in file
---------
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
Co-authored-by: Agus Zubiaga <hi@aguz.me>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Co-authored-by: Agus Zubiaga <agus@zed.dev>
This slashes our incremental dev times (touch editor) by 0.6s
(8.1->7.6s) due to unblocking terminal_view build sooner.
Closes #ISSUE
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/21657
In case of the task rerun button tooltip from
f6dabadaf7/crates/terminal_view/src/terminal_view.rs (L1051-L1070)
, the actual button element is not styled as invisible, only its parent.
Zed won't render such element since it's parent is hidden, but will
consider it "visible" all the time its `paint` is called, spawning a
task with the delay, that will create the tooltip:
f6dabadaf7/crates/gpui/src/elements/div.rs (L1949-L1959)
When the parent is hidden, the child won't be painted anymore, and no
mouse listeners will be able to detect this fact and hide the tooltip.
Hence, check such cases separately, during `prepaint`, and invalidate
the tooltips that are not valid anymore.
We cannot use `hitbox.is_hovered(cx)` as it's not really hovered during
prepaint, so a mouse position check is used instead.
Release Notes:
- Fixed tooltips getting stuck
* Remove unnecessary WindowContext and ViewContext '_ lifetimes
* Removed some cases where WindowContext has a different name than `cx`.
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/21906
* After https://github.com/zed-industries/zed/pull/21238,
`TerminalPanel` and `Project` strong references were moved into
`Pane`-related closures, creating a cycle, that did not allow
registering project release and shutting down corresponding language
servers
* After https://github.com/zed-industries/zed/pull/22329, a special
`Editor` was created with a strong reference to the `Project` which
seemed to do nothing bad in general, but when a working Zed was running
a Zed Dev build, had the same issue with preventing language servers
from shutting down.
The latter is very odd, and seems quite dangerous, as any arbitrary
`Editor` with `Project` in it may do the same, yet it seems that we did
not store them before the way git panel does.
I have tried creating a test, yet seems that we need to initialize a lot
of Zed for it which I failed — all my attempts resulted in a single
language server being present in the `Project`'s statuses.
Release Notes:
- Fixed language servers not being released between project reopens
Up until now, in the assistant 2, if you scrolled up either while a
message was being generated or after it's been generated, then submitted
a new message, you'd keep your scroll position. Now, with this PR, if
your scroll position is somewhere else that's not the bottom, as you
submit a new message, you'll be back at the bottom.
https://github.com/user-attachments/assets/8b111c10-27ff-4d7b-9b10-4c31093c6457
Release Notes:
- N/A
Co-authored-by: Agus Zubiaga <hi@aguz.me>
This PR makes it so we always show the "Add Context {keybinding}" text
when there's no context pills attached. Also, while we haven't fully
implemented the mention system (triggered by typing `@`), we removed the
instruction on the message editor placeholder. Once that's fully in
place, we should return with it!
<img width="800" alt="Screenshot 2024-12-27 at 1 35 56 PM"
src="https://github.com/user-attachments/assets/201cf784-e7ac-420a-adf2-51b6e075c2b6"
/>
Release Notes:
- N/A
---------
Co-authored-by: Agus Zubiaga <hi@aguz.me>
Closes https://github.com/zed-industries/zed/issues/19214
Closes https://github.com/zed-industries/zed/pull/22443
Adds `resolved` property into Zed completion item data, to ensure we
resolve every completion item exactly once.
There are 2 paths for singplayer Zed, and corresponding 2 analogues for
multi player code, where resolve may happen:
* completions menu display & selection, that ends up using
`resolve_completions` in `lsp_store.rs`
* applying a completion menu entry, that ends up using
`apply_additional_edits_for_completion` in `lsp_store.rs`
Now, all local counterparts check `enabled` field before resolving and
set it to true afterwards, and reuse the same `resolve_completion_local`
method for resolving the items.
A logic for re-generating docs and item labels was moved out from the
`resolve_completion_local` method into a separate method, as
`apply_additional_edits_for_completion` does not need that, but needs
the rest of the logic for resolving.
During the extraction, I've noted that multiplayer clients are not
getting the item labels, regenerated after the resolve — as the Zed
protocol-based flow is not the exact copy of the local resolving.
To improve that, `resolve_completion_remote` needs to be adjusted, but
this change is omitted to avoid bloating the PR.
Release Notes:
- Fixed autocomplete inserting multiple imports
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [async-broadcast](https://redirect.github.com/smol-rs/async-broadcast)
| dependencies | patch | `0.7.1` -> `0.7.2` |
---
### Release Notes
<details>
<summary>smol-rs/async-broadcast (async-broadcast)</summary>
###
[`v0.7.2`](https://redirect.github.com/smol-rs/async-broadcast/blob/HEAD/CHANGELOG.md#Version-072)
[Compare
Source](https://redirect.github.com/smol-rs/async-broadcast/compare/0.7.1...0.7.2)
- Add `Sender::broadcast_blocking` and `Receiver::recv_blocking`.
[#​41](https://redirect.github.com/smol-rs/async-broadcast/issues/41)
- Use `Mutex` instead of `RwLock` for securing the inner data.
[#​42](https://redirect.github.com/smol-rs/async-broadcast/issues/42)
- Many non-user-facing internal improvements and fixes.
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS44MC4wIiwidXBkYXRlZEluVmVyIjoiMzkuODAuMCIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [env_logger](https://redirect.github.com/rust-cli/env_logger) |
workspace.dependencies | patch | `0.11.5` -> `0.11.6` |
---
### Release Notes
<details>
<summary>rust-cli/env_logger (env_logger)</summary>
###
[`v0.11.6`](https://redirect.github.com/rust-cli/env_logger/blob/HEAD/CHANGELOG.md#0116---2024-12-20)
[Compare
Source](https://redirect.github.com/rust-cli/env_logger/compare/v0.11.5...v0.11.6)
##### Features
- Opt-in file and line rendering
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS44MC4wIiwidXBkYXRlZEluVmVyIjoiMzkuODAuMCIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [libc](https://redirect.github.com/rust-lang/libc) |
workspace.dependencies | patch | `0.2.168` -> `0.2.169` |
---
### Release Notes
<details>
<summary>rust-lang/libc (libc)</summary>
###
[`v0.2.169`](https://redirect.github.com/rust-lang/libc/releases/tag/0.2.169)
[Compare
Source](https://redirect.github.com/rust-lang/libc/compare/0.2.168...0.2.169)
##### Added
- FreeBSD: add more socket TCP stack constants
[#​4193](https://redirect.github.com/rust-lang/libc/pull/4193)
- Fuchsia: add a `sockaddr_vm` definition
[#​4194](https://redirect.github.com/rust-lang/libc/pull/4194)
##### Fixed
**Breaking**:
[rust-lang/rust#132975](https://redirect.github.com/rust-lang/rust/pull/132975)
corrected the signedness of `core::ffi::c_char` on various Tier 2 and
Tier 3 platforms (mostly Arm and RISC-V) to match Clang. This release
contains the corresponding changes to `libc`, including the following
specific pull requests:
- ESP-IDF: Replace arch-conditional `c_char` with a reexport
[#​4195](https://redirect.github.com/rust-lang/libc/pull/4195)
- Fix `c_char` on various targets
[#​4199](https://redirect.github.com/rust-lang/libc/pull/4199)
- Mirror `c_char` configuration from `rust-lang/rust`
[#​4198](https://redirect.github.com/rust-lang/libc/pull/4198)
##### Cleanup
- Do not re-export `c_void` in target-specific code
[#​4200](https://redirect.github.com/rust-lang/libc/pull/4200)
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS44MC4wIiwidXBkYXRlZEluVmVyIjoiMzkuODAuMCIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Closes#22272
Release Notes:
- Added documentation for the new "bounded" mode in the soft_wrap
configuration
Co-authored-by: Kirill Bulatov <mail4score@gmail.com>
This PR adds a more comprehensive shadow example to gpui:
This is prep to work on the following issues:
- Shadows with a blur of 0 do not render. Expected: A shadow with sharp
edges (#22433)
- Spread does not correctly conform to the shape the shadow is cast from
Release Notes:
- N/A
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [actions/checkout](https://redirect.github.com/actions/checkout) |
action | pinDigest | -> `11bd719` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS44MC4wIiwidXBkYXRlZEluVmVyIjoiMzkuODAuMCIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [anyhow](https://redirect.github.com/dtolnay/anyhow) |
workspace.dependencies | patch | `1.0.94` -> `1.0.95` |
---
### Release Notes
<details>
<summary>dtolnay/anyhow (anyhow)</summary>
###
[`v1.0.95`](https://redirect.github.com/dtolnay/anyhow/releases/tag/1.0.95)
[Compare
Source](https://redirect.github.com/dtolnay/anyhow/compare/1.0.94...1.0.95)
- Add
[`Error::from_boxed`](https://docs.rs/anyhow/1/anyhow/struct.Error.html#method.from_boxed)
([#​401](https://redirect.github.com/dtolnay/anyhow/issues/401),
[#​402](https://redirect.github.com/dtolnay/anyhow/issues/402))
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS44MC4wIiwidXBkYXRlZEluVmVyIjoiMzkuODAuMCIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Closes#22366
This PR fixes the issue of crashing when minimizing a window on Windows
11. And this PR supersedes #22366.
The main change in this PR is to stop rendering the window when it is
minimized. Additionally, I’ve made some modifications to the code in
#21756 to improve clarity (I think...).
cc @mgsloan
Release Notes:
- N/A
This PR adds an icon field to the `ContextKind` enum, which means that
icons will now display on context pills, both on the message editor and
on the active thread.
<img width="800" alt="Screenshot 2024-12-24 at 12 23 17 AM"
src="https://github.com/user-attachments/assets/f00e540b-30fe-49ac-b3df-7c7a5dc86d65"
/>
Release Notes:
- N/A
Closes#21406
Context:
A few weeks ago on Linux, we resolved an
[issue](https://github.com/zed-industries/zed/issues/20070) where users
could not open more than one file from the file explorer. This was fixed
by replacing `zed-editor` (zed binary in the code) with `zed` (cli
binary in the code) in the `.desktop` file. The reason for this change
was that using the cli to open files is more convenient - it determines
weather to spawn a new Zed instance or use an existing one, if we use
main binary instead it would throw error `Zed is already running`.
You can read the complete PR here: [linux: Fix file not opening from
file explorer](https://github.com/zed-industries/zed/pull/21137).
While this fix resolved the original issue, it introduced a new one.
Problem:
When the cli binary is used, it assumes it is always being invoked from
a terminal and relies on `std::env::vars()` to retrieve the environment
variables needed to spawn Zed. These env vars are then passed to the
worktree, and eventually, languages use the `PATH` from this env to find
binaries. This leads to the "Failed to start language server" error when
the `.desktop` entry is used on Linux.
Solution:
When the `zed-editor` binary is used, it uses some clever Unix-specific
logic to retrieve the default shell (`load_shell_from_passwd`) and then
fetch the env vars from that shell (`load_login_shell_environment`).
This same logic should be used in the cli binary when it is invoked via
a `.desktop` entry rather than from a terminal.
Approach:
I moved these two functions mentioned above to a utils file and reused
them in cli binary to fetch env vars only on Linux when it is not run
from a terminal. This provides missing paths, and fix the issue.
It is also possible to handle this in the `zed-editor` binary by
modifying the logic in `handle_cli_connection`, where `CliRequest::Open`
is processed. There we can discard incoming env, and use our logic. But
discarding incoming envs felt weird, and I thought it's better to handle
this at source.
Release Notes:
- Fixed `Failed to start language server` errors when starting from
dekstop entry on Linux
- [x] Upload separate debug symbols for Linux binaries to DigitalOcean
- [x] Send raw offsets with panic report JSON on Linux
- [x] Update `symbolicate` script to handle Linux crashes
- [x] Demangle backtraces 🎉
- [x] Check that it works
- [x] Improve deduplication (?)
Release Notes:
- N/A
---------
Co-authored-by: Conrad <conrad@zed.dev>
* Now more often displayed to the right. Resizes docs width if more
space than min width is available.
* If constrained in horizontal space and so displayed above/below resize
docs height to fit.
* Makes space for scrollbar and gap.
Layout is imperfect for viewport sizes smaller than the context menu,
left TODOs in the code for handling this. Wanted to get this change out
for feedback first.
Release Notes:
- N/A
Makes a first pass over git panel UI, making it more interactive.
* every item can be selected, the selection is shown in the panel
* every item can be clicked, which changes the selection and
creates/focuses the editor with a project changes multi buffer
* the editor is scrolled so that the clicked item is in the center
* it's possible to nagivate up and down the panel, selecting
next/previous items in it, triggering the editor scroll
Known issues:
* entries are updated oddly sometimes (should become better after
DiffMap improvements land?)
* only unstaged diffs are shown currently (entry status storage should
help with this)
* no deleted files are displayed (the underlying work is done by others
now)
* added files have no diff hunks shown (DiffMap will have it?)
* performance story has not improved (again, DiffMap and status storage
should help with this)
Release Notes:
- N/A
@iamnbutler noticed slowness in assistant panel which I've pinned down
to the fact that we're calculating buffer diff on foreground thread.
This PR moves this computation into the background; I don't know much
about Zeta but it seems fine to do, as the call-site is asynchronous
anyways.
Closes #ISSUE
Release Notes:
- N/A
This PR removes usages of `use gpui::*;` in the codebase (excluding
examples).
We should only use glob imports for `gpui::prelude`, and then import
everything else individually.
Release Notes:
- N/A
This is quite experimental and untested in languages other than Rust.
It's written to attempt to do something sensible in many languages. Due
to its experimental nature, just releasing to staff, and so not
including it in release notes. Future release note might be "Improved
diagnostic excerpts by using syntactic info to determine the context
lines to show."
Release Notes:
- N/A
Closes#17870
Context:
On Linux, when creating a new window, bounds are either pulled from
existing workspace data (serialized in an SQLite DB) or fall back to
some default constants if no data exists.
These bounds include the full dimensions of the window (width and
height), which already account for insets. However, properties like
`inset` (Wayland) or `last_insets` (X11) exist only at the platform
level and are not part of the window bounds themselves.
During rendering, we call `set_client_inset`, which updates the inset
values and also adjusts the window bounds, increasing their dimensions.
In Zed's case, the inset is 10px, which adds 20px to both the width and
height (10px from each side).
Problem:
When quitting, the full window bounds (which already account for inset)
are saved to the DB. On reopening, these saved bounds are used to create
the window. `set_client_inset` runs again and inflates the dimensions
even more.
Solution:
Store window bounds *without* the inset-inflated dimensions. On the next
session, `set_client_inset` will take care of applying the inset,
resulting window dimensions matching the previous session. This fix is
in the PR.
Alternative Solution:
Another option is to save the inset explicitly in the DB and apply it
during window creation. But this means storing more data, and the inset
would need to be platform-agnostic, which adds complexity. Doesn’t seem
worth it for no real gain.
X11 Before:
```sh
saving window bounds with width: 1136, height: 784
tims@lemon ~/w/zed (fix-window-growing-larger)> cargo run
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.37s
Running `target/debug/zed`
saving window bounds with width: 1156, height: 804 <---- +20px
tims@lemon ~/w/zed (fix-window-growing-larger)> cargo run
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.35s
Running `target/debug/zed`
saving window bounds with width: 1176, height: 824 <---- +20px
tims@lemon ~/w/zed (fix-window-growing-larger)> cargo run
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.36s
Running `target/debug/zed`
saving window bounds with width: 1196, height: 844 <---- +20px
```
X11 After:
```sh
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.35s
Running `target/debug/zed`
saving window bounds with width: 1116, height: 764
tims@lemon ~/w/zed (fix-window-growing-larger)> cargo run
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.35s
Running `target/debug/zed`
saving window bounds with width: 1116, height: 764 <---- same
tims@lemon ~/w/zed (fix-window-growing-larger)> cargo run
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.35s
Running `target/debug/zed`
saving window bounds with width: 1116, height: 764 <---- same
```
On Wayland, saving occurs only when you actually resize the window (on
X11, saving happens both on init and while dragging the window). To
trigger saving, I manually resized the window by ~1px to make it print.
Wayland Before:
```sh
Finished `dev` profile [unoptimized + debuginfo] target(s) in 1m 36s
Running `target/debug/zed`
saving window bounds with width: 945, height: 577
tims@orange ~/zed (fix-window-growing-larger)> cargo run
Finished `dev` profile [unoptimized + debuginfo] target(s) in 1.77s
Running `target/debug/zed`
saving window bounds with width: 966, height: 597 <--- +20px on both (1px increase in width is me resizing)
tims@orange ~/zed (fix-window-growing-larger)> cargo run
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.87s
Running `target/debug/zed`
saving window bounds with width: 987, height: 618 <--- +20px on both (1px increase in width and height is me resizing)
tims@orange ~/zed (fix-window-growing-larger)> cargo run
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.89s
Running `target/debug/zed`
saving window bounds with width: 1006, height: 638 <--- +20px on both (1px decrease in width is me resizing)
```
Wayland After:
```sh
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.82s
Running `target/debug/zed`
saving window bounds with width: 925, height: 558
tims@orange ~/zed (fix-window-growing-larger)> cargo run
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.84s
Running `target/debug/zed`
saving window bounds with width: 925, height: 557 <--- same (1px decrease in height is me resizing)
saving window bounds with width: 925, height: 558
```
Release Notes:
- Fix non-maximized zed windows growing larger across sessions on Linux
---------
Co-authored-by: mgsloan@gmail.com <michael@zed.dev>
Leaving release notes as N/A because it had release notes in the past in
#21705
In #21286, documentation resolution was made more efficient by only
resolving the current completion. However, this meant that single line
documentation shown inline in the menu was missing until scrolled
to. This also meant that it would wait for navigation to resolve
completion docs, leading to lag for displaying documentation.
This change resolves this by attempting to fetch all the completions
that will be shown. It also mostly avoids re-resolving completions. It
intentionally re-resolves the current selection on navigation, as some
language servers will respond with more information later on.
Release Notes:
- N/A
No issue attached, as this is something trivial and should have been
part of my merged PR
[here](https://github.com/zed-industries/zed/pull/22073).
For context, in the above-mentioned PR, I removed the hover color from
selected/marked entries in the Project Panel. The reasoning behind this
change is already explained in that PR, but to reiterate:
> This change was inspired by the behavior in VSCode, the Firefox
sidebar, and Dolphin (KDE File Manager). When an item is selected, it
doesn’t display a separate hover state to avoid confusing users about
whether the item is selected or merely hovered over.
@nilskch mentioned in the comments of the above PR that I should have
also changed the background of the knockout icon, which appears on
entries, to match the entry background color on hover. This PR addresses
that.
Before:
After:
Release Notes:
- N/A
We've received a complaint on Discord about bad multicursor performance.
I too run 15k cursor simultaneously. The gist of the issue was in the
lsp_ext; whenever we gather up actions to be registered on a buffer, we
need to know whether a buffer has any of the languages for which we have
LSP extensions. The problem stemed from the fact that we did a two-phase
filtering. For each selection we'd first check whether this selection
lies in a part of a file that is part of a language for which we have
LSP extensions. Then, we'd check whether we're running a language server
of interest for this buffer.
This is not optimal, because it would often do the redundant work:
1. We resolve selections for buffer that are known to not contain a
given language server.
2. We look up language server in the LspStore once per each matching
selection.
In case where the file is not related at all, we end up resolving all of
the selections which is pretty bad. This PR makes us skip buffers which
are known to not match the criteria. It also caches the result of
language server lookup for the buffers.
Closes #ISSUE
Release Notes:
- Improved performance with large quantity of cursors
This message has confused me many times too: we printed the status as
"Downloading" when we were only checking whether we need to install a
given version of a language server.
This fixes the issue for Node-based language servers where we had the
same check in all implementations.
Closes #22241
Release Notes:
- Fixed some language servers reporting status as "Downloading..." when
only a version check was being done.
This PR removes the gate that limited Assistant2 to development builds,
so that we can start testing it out in Nightly.
Note that currently this still requires explicit opt-in to the
`assistant2` feature flag.
Release Notes:
- N/A
Expands #18715
Release Notes:
- Added arrow keys movement to the built-in terminal's [vi
mode](https://github.com/alacritty/alacritty/blob/master/docs/features.md#vi-mode)
(which is using Alacritty under the hood).
Details
--
A minuscule improvement on #18715 to allow user with alternative
keyboard layouts to use the terminal's vi mode with the arrow keys.
Fixes#22151.
Turns out Vim also has some weird behavior with sentence deletion in
case it's on the first character of a line.
Release Notes:
- vim: Fixed deleting sentence-wise (i.e. `d(` and `d)`), which would
previously delete the whole line instead of just a sentence.
This PR ensures that, for fixed-width fonts, the cursor width is the
same on blank lines as on non-blank lines, as well as at the end of a
line. It does so by using the em advance to define the cursor width
instead of the em width in these cases.
Note that this can look... bizarre on non-fixed-width fonts:
<img width="93" alt="Screenshot 2024-12-19 at 21 43 11"
src="https://github.com/user-attachments/assets/a4c9b26c-98ea-4a1d-947b-51f1acd3c2f8"
/>
However, this is arguably reasonably consistent with how (terminal) Vim
handles it:
<img width="45" alt="Screenshot 2024-12-19 at 21 46 42"
src="https://github.com/user-attachments/assets/ec3ff614-7a15-4cc3-8d14-3d15ce62f2b8"
/>
Closes#22260.
Release Notes:
- N/A
Closes#22264
On Linux, the arrow cursor style currently used by Zed is `arrow`.
However, this style might not be available in most themes, causing the
cursor to fall back to system default theme. Note cursor style are
platform (X11 and Wayland) agnostic.
Most themes use `left_ptr` as their arrow cursor style instead of
`arrow`. In some cases, `left_ptr` and `arrow` are symlinks pointing to
the `default` style, but the `default` style is not guaranteed to be
available across all themes.
After inspecting the available cursor themes on popular desktop
environments, changing the default from `arrow` to `left_ptr` seems to
be available in all of them. `left_ptr` as default cursor style is also
mentioned in [Arch Wiki: Cursor
themes](https://wiki.archlinux.org/title/Cursor_themes#Change_X_shaped_default_cursor).
KDE:
```sh
tims@lemon /u/s/icons> find . -name "arrow"
./Breeze_Snow/cursors/arrow
./breeze_cursors/cursors/arrow
./Adwaita/cursors/arrow
tims@lemon /u/s/icons> find . -name "default"
./default
./Breeze_Snow/cursors/default
./breeze_cursors/cursors/default
./Adwaita/cursors/default
tims@lemon /u/s/icons> find . -name "left_ptr"
./Oxygen_White/cursors/left_ptr
./KDE_Classic/cursors/left_ptr
./Oxygen_Yellow/cursors/left_ptr
./Oxygen_Blue/cursors/left_ptr
./Oxygen_Black/cursors/left_ptr
./Breeze_Snow/cursors/left_ptr
./breeze_cursors/cursors/left_ptr
./Adwaita/cursors/left_ptr
./Oxygen_Zion/cursors/left_ptr
```
Gnome:
```sh
tims@orange:/usr/share/icons$ find . -name "arrow"
./DMZ-Black/cursors/arrow
./Adwaita/cursors/arrow
./redglass/cursors/arrow
./whiteglass/cursors/arrow
./handhelds/cursors/arrow
./Yaru/cursors/arrow
./DMZ-White/cursors/arrow
tims@orange:/usr/share/icons$ find . -name "default"
./Adwaita/cursors/default
./default
./Yaru/cursors/default
tims@orange:/usr/share/icons$ find . -name "left_ptr"
./DMZ-Black/cursors/left_ptr
./Adwaita/cursors/left_ptr
./redglass/cursors/left_ptr
./whiteglass/cursors/left_ptr
./handhelds/cursors/left_ptr
./Yaru/cursors/left_ptr
./DMZ-White/cursors/left_ptr
```
My theme is set to Oxygen Yellow here.
Before:
<img
src="https://github.com/user-attachments/assets/7485f1e7-5936-45b4-96bd-399525bad95d"
alt="before" width="450px" />
After:
<img
src="https://github.com/user-attachments/assets/56090735-6a1f-4652-ad3e-075ff4c3f9ab"
alt="after" width="450px" />
Release Notes:
- Fixed wrong cursor theme for arrow cursor style on Linux.
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [aws-config](https://redirect.github.com/smithy-lang/smithy-rs) |
dependencies | patch | `1.5.10` -> `1.5.11` |
| [aws-sdk-kinesis](https://redirect.github.com/awslabs/aws-sdk-rust) |
dependencies | minor | `1.52.0` -> `1.53.0` |
| [aws-sdk-s3](https://redirect.github.com/awslabs/aws-sdk-rust) |
dependencies | minor | `1.65.0` -> `1.66.0` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
👻 **Immortal**: This PR will be recreated if closed unmerged. Get
[config
help](https://redirect.github.com/renovatebot/renovate/discussions) if
that's undesired.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS43Mi41IiwidXBkYXRlZEluVmVyIjoiMzkuNzIuNSIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [hyper](https://hyper.rs)
([source](https://redirect.github.com/hyperium/hyper)) |
workspace.dependencies | patch | `0.14.31` -> `0.14.32` |
---
### Release Notes
<details>
<summary>hyperium/hyper (hyper)</summary>
###
[`v0.14.32`](https://redirect.github.com/hyperium/hyper/releases/tag/v0.14.32)
[Compare
Source](https://redirect.github.com/hyperium/hyper/compare/v0.14.31...v0.14.32)
#### Features
- **server:** add `Builder::max_pending_accept_reset_streams(num)`
option
([a24f0c0](a24f0c0af8))
#### Bug Fixes
- **http1:** fix intermittent panic parsing partial headers
([0f274ae](0f274ae653))
#### New Contributors
- [@​cratelyn](https://redirect.github.com/cratelyn) made their
first contribution in
[https://github.com/hyperium/hyper/pull/3796](https://redirect.github.com/hyperium/hyper/pull/3796)
**Full Changelog**:
https://github.com/hyperium/hyper/compare/v0.14.31...v0.14.32
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS43Mi41IiwidXBkYXRlZEluVmVyIjoiMzkuNzIuNSIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [semver](https://redirect.github.com/dtolnay/semver) |
workspace.dependencies | patch | `1.0.23` -> `1.0.24` |
---
### Release Notes
<details>
<summary>dtolnay/semver (semver)</summary>
###
[`v1.0.24`](https://redirect.github.com/dtolnay/semver/releases/tag/1.0.24)
[Compare
Source](https://redirect.github.com/dtolnay/semver/compare/1.0.23...1.0.24)
- Optimize Ord impls for semver::Prerelease and semver::BuildMetadata
([#​328](https://redirect.github.com/dtolnay/semver/issues/328),
thanks [@​Eh2406](https://redirect.github.com/Eh2406))
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS43Mi41IiwidXBkYXRlZEluVmVyIjoiMzkuNzIuNSIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [tree-sitter-c](https://redirect.github.com/tree-sitter/tree-sitter-c)
| workspace.dependencies | patch | `0.23.2` -> `0.23.4` |
---
### Release Notes
<details>
<summary>tree-sitter/tree-sitter-c (tree-sitter-c)</summary>
###
[`v0.23.4`](https://redirect.github.com/tree-sitter/tree-sitter-c/releases/tag/v0.23.4)
[Compare
Source](https://redirect.github.com/tree-sitter/tree-sitter-c/compare/v0.23.2...v0.23.4)
**NOTE:** Download `tree-sitter-c.tar.xz` for the *complete* source
code.
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS43Mi41IiwidXBkYXRlZEluVmVyIjoiMzkuNzIuNSIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Closes#13585
Currently, saving files with `root` ownership or `root` as the group
throws a `Permission denied (os error 13). Please try again.` error.
This PR fixes the issue on Linux by prompting the user for a password
and saving the file with elevated privileges.
It uses `pkexec` (Polkit), which is by default available on GNOME, KDE,
and most Linux systems. I haven't implemented this for macOS as I don't
have a device to test it on.
This implementation is similar to how Vscode handles it. Except, they
don't show custom message.
**Working**:
When file saving fails due to a `PermissionDenied` error, we create a
temporary file in the same directory as the target file and writes the
data to this temporary file. After, the contents of this file are copied
to the original file using the `tee` command instead of `cp` or `mv`.
This ensures that the ownership and permissions of the original file are
preserved. This command is executed using `pkexec` which will prompt
user for their password.
**Custom Message**:
The message displayed to the user in the prompt is automatically
retrieved from the `org.zed.app.policy` file, which is located at
`/usr/share/polkit-1/actions/`. This file should be installed during the
setup process. While the policy file is optional, omitting it will cause
the user to see the underlying command being executed rather than a
user-friendly message. Currently, VSCode does not display the
user-friendly message.
The policy file must specify a unique binary, ensuring that only that
binary can use the policy file. It cannot be as generic as a
`/bin/bash`, as any software using bash to prompt will end up showing
Zed’s custom message. To address this, we will create a custom bash
script, as simple as the following, placed in `/usr/bin/zed/elevate.sh`.
The script should have root ownership and should not reside in the home
directory, since the policy file cannot resolve `$HOME`.
```sh
#!/bin/bash
eval "$@"
```
*IMPORTANT NOTE*
Since copying the policy file and our script requires sudo privileges,
the installation script will now prompt for the password at very end.
Only on Linux, if `pexec` is installed.
Screenshots:
KDE with policy file:
Gnome with policy file:
Gnome without policy file:
VSCode:
User declines the permission request:
Release Notes:
- Fixed file saving with root ownership on Linux.
This PR is a follow up to #22254 with a different approach.
We need to put the conditional on each step in order to skip them, as I
couldn't see any other way of bailing out of the pipeline early based on
a condition.
Release Notes:
- N/A
Closes#21505. This should work if the git dir is an ancestor of the
worktree dir or vice versa.
Release Notes:
- Fixed GitHub permalink-to-line actions when worktree dir and Git dir
aren't the same
Update macOS system requirements to include Sequoia (15.x), the latest
major version.
Release Notes:
- N/A
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
The command used to activate the venv can still be accessed/scrolled to
if needed.
Release Notes:
- The Python virtual environment activation command is no longer shown
in the terminal output by default.
Co-authored-by: Peter Tripp <peter@zed.dev>
This doesn't include the outline in the prompt yet, but it does send it
up via telemetry so we can use it to see whether it would have improved
generated output.
Release Notes:
- N/A
Co-authored-by: Agus <agus@zed.dev>
I noticed a problem with the addition of required status checks where
PRs that only touched the docs wouldn't pass the status checks due to
all of the checks being skipped via `paths-ignore`:
<img width="950" alt="Screenshot 2024-12-19 at 11 16 38 AM"
src="https://github.com/user-attachments/assets/a6fa43ee-de63-40a6-a15a-f2f3519e9db8"
/>
This PR aims to address this by making it so required status checks run
for docs-only PRs, but exit early (before doing all of the work).
Release Notes:
- N/A
Fixes https://github.com/zed-industries/zed/issues/21972
This fixes two bugs:
**Bug 1**: this bug caused us to only ever load a single environment in
a multi-worktree project, thanks to this line:
```rust
if let Some(task) = self.get_environment_task.as_ref()
```
We'd only ever run a single task per project, which is wrong.
What does code does is to cache the tasks per `worktree_id`, which means
we don't even need to cache the environments again, since we can just
cache the `Shared<Task<...>>`.
**Bug 2**: we assumed that every `worktree_abs_path` is a directory,
which lead to `Failed to run direnv` log messages when opening a project
that had a worktree with a single file open (easy to reproduce: open a
normal project, open your settings, close Zed, reopen it — the settings
faile caused environments to not load)
It's fixed by checking whether the `worktree_abs_path` is an absolute
directory. Since this is always running locally, it's fine to use
`smol::fs` here instead of using our `Fs`.
Release Notes:
- Fixed shell environments not being loaded properly to be used by
language servers and terminals in case a project had multiple worktrees.
- Fixed `Failed to run direnv` messages showing up in case Zed restored
a window that contained a worktree with a single file.
https://github.com/zed-industries/zed/issues/21972
For example, `editor::TabPrev` matches "editor: tab prev".
Release Notes:
- Added support for searching command palette using keymap-style action
names.
---------
Co-authored-by: Peter Tripp <peter@zed.dev>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
|
[async-tungstenite](https://redirect.github.com/sdroege/async-tungstenite)
| workspace.dependencies | patch | `0.28.1` -> `0.28.2` |
---
### Release Notes
<details>
<summary>sdroege/async-tungstenite (async-tungstenite)</summary>
###
[`v0.28.2`](https://redirect.github.com/sdroege/async-tungstenite/blob/HEAD/CHANGELOG.md#0282---2024-12-15)
[Compare
Source](https://redirect.github.com/sdroege/async-tungstenite/compare/0.28.1...0.28.2)
##### Fixed
- Add `alloc` feature to `futures_task` dependency to make sure
`futures-task::ArcWake` is available.
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS43Mi41IiwidXBkYXRlZEluVmVyIjoiMzkuNzIuNSIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Closes#16033
Addresses one part of #4475
Release Notes:
- Added support for find and replace in diagnostics. Also causes
keybindings that use search to now work (such as `*` and `#` vim
bindings).
Closes#19837
This PR implements menus for Linux and Windows, inspired by JetBrains
IDEs. Thanks to @notpeter for the inspiration.
https://github.com/user-attachments/assets/7267fcdf-fec5-442e-a53b-281f89471095
I plan to complete this in multiple parts. While this PR delivers a
fully functional menus, there are many UX improvements that can be done.
So, this is part 1 of 3.
**This PR**:
- [x] Clicking the application menu opens the first menu popup. This
also shows other available menus.
- [x] While a menu is open, hovering over other menus opens them without
needing a click.
- [x] Up/down arrow keys works out of the box. Thanks GPUI.
**Future - Part 2**:
- Add keybinding support to open specific menus using `Option + first
character of menu item`.
- Add support for left/right arrow keys to move between menus.
**Future - Part 3**:
- Implement nested context menus in GPUI for submenus. (I haven't
checked if this already exists).
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
Closes#17005
Release Notes:
- Improved GPU context management: share a single context with multiple
surfaces.
### High Level
Blade got a proper support for Surface objects in
https://github.com/kvark/blade/pull/203.
That was mainly motivated by Zed needing to draw multiple windows. With
the Surface API, Zed is now able to have the GPU context tied to the
"Platform" instead of "Window". Practically speaking, this means:
- architecture more sound
- faster to open/close windows
- less surprises, more robust
### Concerns
1. Zed has been using a temporary workaround for the platform bug on
some Intel+Nvidia machines that makes us unable to present -
https://github.com/kvark/blade/pull/144 . This workaround is no longer
available with the new architecture. I'm looking for ideas on how to
approach this better.
- we are now picking up the change in
https://github.com/kvark/blade/pull/210, which allows forcing a specific
Device ID. This should allow Zed users to work around the issue. We
could help them to automate it, too.
2. ~~Metal-rs dependency is switched to
https://github.com/kvark/metal-rs/tree/blade, since upstream isn't
responsive in merging changes that are required for Blade. Hopefully,
temporary.~~
- ~~we can also hack around it by just transmuting the texture
references, since we know those are unchanged in the branch. That would
allow Blade to use it's own version of Metal, temporarily, if switching
metal-rs in the workspace is a concern.~~
- merged my metal-rs changes and updated Zed to use the upstream github
reference
---------
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Builds on https://github.com/zed-industries/zed/pull/22160 and extracts
the rest of `PromptEditor` so it can be shared across terminal and
inline assistants. This will help avoid the UI drifting as we have
already observed.
Note: This is mostly a mechanical refactor. I imagine some things could
be factored in a better way by someone with more context, but I think
this is a good start.
Release Notes:
- N/A
---------
Co-authored-by: Richard Feldman <oss@rtfeldman.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
|
[actions/upload-artifact](https://redirect.github.com/actions/upload-artifact)
| action | digest | `b4b15b8` -> `6f51ac0` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS43Mi41IiwidXBkYXRlZEluVmVyIjoiMzkuNzIuNSIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [heed](https://redirect.github.com/Kerollmops/heed) |
workspace.dependencies | minor | `0.20.1` -> `0.21.0` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS41OC4xIiwidXBkYXRlZEluVmVyIjoiMzkuNTguMSIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [cargo_toml](https://lib.rs/cargo_toml)
([source](https://gitlab.com/lib.rs/cargo_toml)) |
workspace.dependencies | minor | `0.20` -> `0.21` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS41OC4xIiwidXBkYXRlZEluVmVyIjoiMzkuNTguMSIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR adds an initial version of using `@` in the message editor to
add context to the thread.
We don't yet insert any sort of reference to it in the message body
itself.
Release Notes:
- N/A
Motivation for this is to allow the `main` branch to be protected. This will enable use of auto-merge and merge queue.
Co-authored-by: Peter Tripp <peter@zed.dev>
This PR fixes an issue where disabled extension cards would block scroll
events when the mouse was over them.
Instead of using `.occlude`—which captures _all_ mouse events—we use
`.block_mouse_down` to just block mouse down events (to prevent clicking
the buttons on the disabled card). We also set the cursor style to the
default, as it was still switching to the pointer when hovered over top
of one of the buttons.
Release Notes:
- Fixed disabled extensions blocking scroll events in the extensions
list.
Closes #ISSUE
Still TODO to make this feature good is better command history
Release Notes:
- vim: Add support for `:g/<pattern>/<cmd>` and `:v/<pattern>/<cmd>`
If an inline completion isn't shown in a menu, we highlight text in the
editor as deleted.
But if it's shown in the menu, we didn't even show deleted text, which
makes it hard to understand what's going on.
This fixes it.
Release Notes:
- N/A
Also makes the inline assistant and inline terminal assistant share a
bunch more code.
Release Notes:
- N/A
---------
Co-authored-by: Agus <agus@zed.dev>
Co-authored-by: Agus Zubiaga <hi@aguz.me>
This changes #22093 by making the change only have an effect for the
supported provider: Zeta.
Made the change because the UX is still experimental and I don't want to
break existing workflows for Copilot/Supermaven users.
Even Zeta users can opt-out of it by setting
`"show_inline_completions_in_menu": false` in their settings, in case
they want the old show-inline-completion-or-show-lsp-completion behavior
back.
Release Notes:
- N/A
Possible panic here in case we can't find the excerpt in the
multibuffer.
I thought this could happen when the inline completion references an
excerpt that disappeared from the multibuffer, but looking at the code
I'm not sure anymore - we use the same multibuffer snapshot in this
whole function and the `anchor_in_excerpt` method clips the anchors.
Still, let's be safe here.
Release Notes:
- N/A
We were committing the cardinal sin of subtracting one from a column
without clipping
Closes #ISSUE
Release Notes:
- Fixed a panic in linked editing ranges
When running the collab server locally on a new machine, I found there
were some instructions missing for setting up the Postgres database.
Namely, the user mentioned on the `.env.toml` is not created by default.
Ref: https://github.com/zed-industries/zed/issues/8260
Release Notes:
- N/A
* Presence of the aside no longer affects position or size of the
context menu.
* Prefers to fit to the right, then on same side of line, then other
side of line, within the following preference order:
- Max possible size within text area.
- Max possible size within window.
- Actual size within window. This is the only case that could cause it
to jump around with less stability.
A further enhancement atop this might be to dynamically resize aside
height to fit.
Release notes are N/A as they are covered by the notes for #22102.
Closes#8523
Release Notes:
* N/A
This PR fixes some focus issues with opening the thread history, which
required that the Assistant2 panel be focused in order for the history
to open.
Release Notes:
- N/A
This PR fixes an issue with the Assistant2 file context picker where
files weren't being attached properly.
We needed to retrieve the files from the worktree without the worktree
root name in the file path.
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
Previously, each window stored its own collection of focus handles. This
meant that to create a focus handle, you needed to have access to a
Window. I'm working on a simplification to gpui's context types that
removes `WindowContext` and `ViewContext` in favor of passing a window
reference explicitly when rendering or handling events. You'll still
need a window to manipulate focus, but it will be helpful to be able to
create focus handles without a window.
cc @mgsloan
Release Notes:
- N/A
This PR fixes some formatting issues in the workspace initialization
code that stemmed from certain constructs causing `rustfmt` to bail out
of the formatting.
The bulk of the content of `initialize_workspace` has been factored out
into functions, as having nested closures within closures seems to be
the primary cause of `rustfmt` being unhappy.
Release Notes:
- N/A
This PR makes it so both Assistant panels are visible when in the
`assistant2` feature flag.
This way folks can continue using Assistant1 if Assistant2 isn't meeting
their needs.
Right now they are shown as two different panels shown in the status bar
(although using the same icon), but this is just a temporary state until
we can surface the Assistant1 functionality in Assistant2 somehow.
Note that the inline assist will always use the Assistant2 panel.
Release Notes:
- N/A
This PR sketches in the structure for the directory context picker.
Waiting on implementing the actual behavior until we fix the issues with
the file context picker.
Release Notes:
- N/A
Closes#4427
Release Notes:
- Added a horizontal scrollbar to the editor panel
- Added `axis` option to `scrollbar` in the Zed configuration, which can
forcefully disable either the horizontal or vertical scrollbar
- Added `horizontal_scroll_margin` equivalent to
`vertical_scroll_margin` in the Zed configuration
Rough Edges:
This feature seems mostly stable from my testing. I've been using a
development build for about a week with no issues. Any feedback would be
appreciated. There are a few things to note as well:
1. Scrolling to the lower right occasionally causes scrollbar clipping
on my end, but it isn't consistent and it isn't major. Some more testing
would definitely be a good idea. [FIXED]
2. Documentation may need to be modified
3. I added an `AxisPair` type to the `editor` crate to manage values
that have a horizontal and vertical variant. I'm not sure if that's the
optimal way to do it, but I didn't see a good alternative. The `Point`
type would technically work, but it may cause confusion.
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
This makes inline completions show up in the completion menu even if the
user has set `"show_completion_documentation": false` in their settings,
because there is no other way to show the Zeta completion.
Follow-up to #22093
Release Notes:
- N/A
Co-authored-by: Danilo <danilo@zed.dev>
In different parts of the app, but all of them can be seen in the
screenshot below:
<img width="800" alt="Screenshot 2024-12-16 at 21 31 51"
src="https://github.com/user-attachments/assets/79c0ad5e-4e4c-469d-93a1-fd4e707d4aaa"
/>
Release Notes:
- N/A *or* Added/Fixed/Improved ...
* Now decides whether the menu is above or below the target position
before rendering it. This causes its position to no longer vary
depending on the length of completions
* When the text area is height constrained (< 12) lines, now chooses the
side which has the most space. Before it would always display above if
height constrained below.
* Misc code cleanups
Release Notes:
- Improved completions menu layout to be more stable and use available
space better.
This PR makes it so `assistant` and `assistant2` both use the same
action for inline assist (`zed_actions::InlineAssist`).
This makes it so the keybindings to deploy the inline assist seamlessly
swap based on the feature flag without needing to rebind them.
One minor caveat: if you're using `assistant2` the action name in the
command palette will be `assistant: inline assist`.
Release Notes:
- N/A
This PR adds an action and associated keybinding
(<kbd>Cmd+Shift+A</kbd>) to toggle the context picker.
This allows for adding context via the keyboard.
Release Notes:
- N/A
This PR makes `ListItem`s with `outlined` set use the same rounding for
their hover state to ensure that the hover background doesn't bleed
outside of the outline.
Release Notes:
- N/A
This PR adds a `text_ellipsis` method to `Label`s.
This can be used to truncate the text with an ellipsis without needing
to wrap the `Label` in another element.
Release Notes:
- N/A
This suggest the [Cython
extension](https://github.com/lgeiger/zed-cython) for syntax
highlighting of Cython files.
Release Notes:
- Suggest Cython extension for syntax highlighting of `.pyx`, `.pxd` and
`.pxi` files
This PR updates up the context picker for the terminal's inline assist.
Release Notes:
- N/A
Co-authored-by: Richard <richard@zed.dev>
Co-authored-by: Agus <agus@zed.dev>
This PR wire up the context picker with the inline assist.
UI is not finalized.
Release Notes:
- N/A
---------
Co-authored-by: Richard <richard@zed.dev>
Co-authored-by: Agus <agus@zed.dev>
# This config is different from config.toml in this directory, as the latter is recognized by Cargo.
# This file is placed in ./../.cargo/config.toml on CI runs. Cargo then merges Zeds .cargo/config.toml with ./../.cargo/config.toml
# with preference for settings from Zeds config.toml.
# TL;DR: If a value is set in both ci-config.toml and config.toml, config.toml value takes precedence.
# Arrays are merged together though. See: https://doc.rust-lang.org/cargo/reference/config.html#hierarchical-structure
# The intent for this file is to configure CI build process with a divergance from Zed developers experience; for example, in this config file
# we use `-D warnings` for rustflags (which makes compilation fail in presence of warnings during build process). Placing that in developers `config.toml`
# would be incovenient.
# The reason for not using the RUSTFLAGS environment variable is that doing so would override all the settings in the config.toml file, even if the contents of the latter are completely nonsensical. See: https://github.com/rust-lang/cargo/issues/5376
# Here, we opted to use `[target.'cfg(all())']` instead of `[build]` because `[target.'**']` is guaranteed to be cumulative.
description:"Tip: open this issue template from within Zed with the `request feature` command palette action"
labels:["admin read","triage","enhancement"]
body:
- type:checkboxes
attributes:
label:Check for existing issues
description:Check the backlog of issues to reduce the chances of creating duplicates; if an issue already exists, place a `+1` (👍) on it.
options:
- label:Completed
required:true
- type:textarea
attributes:
label:Describe the feature
description:A clear and concise description of what you want to happen.
validations:
required:true
- type:textarea
id:environment
attributes:
label:Environment
description:Run the `copy system specs into clipboard` command palette action and paste the output in the field below. If you are unable to run the command, please include your Zed version and release channel, operating system and version, RAM amount, and architecture.
validations:
required:true
- type:textarea
attributes:
label:|
If applicable, add mockups / screenshots to help present your vision of the feature
Use this template for **non-crash-related** bug reports.
Tip: open this issue template from within Zed with the `file bug report` command palette action.
labels:["admin read","triage","bug"]
Something is broken in Zed (exclude crashing).
type:"Bug"
body:
- type:checkboxes
attributes:
label:Check for existing issues
description:Check the backlog of issues to reduce the chances of creating duplicates; if an issue already exists, place a `+1` (👍) on it.
options:
- label:Completed
required:true
- type:textarea
attributes:
label:Describe the bug / provide steps to reproduce it
description:A clear and concise description of what the bug is.
label:Summary
description:Describe the bug with a one line summary, and provide detailed reproduction steps
value:|
<!-- Please insert a one line summary of the issue below -->
<!-- Include all steps necessary to reproduce from a clean Zed installation. Be verbose -->
Steps to trigger the problem:
1.
2.
3.
Actual Behavior:
Expected Behavior:
validations:
required:true
- type:textarea
id:environment
attributes:
label:Environment
description:Run the `copy system specs into clipboard` command palette action and paste the output in the field below. If you are unable to run the command, please include your Zed version and release channel, operating system and version, RAM amount, and architecture.
label:Zed Version and System Specs
description:'Open Zed, and in the command palette select "zed: Copy System Specs Into Clipboard"'
placeholder:|
Output of "zed: Copy System Specs Into Clipboard"
validations:
required:true
- type:textarea
attributes:
label:If applicable, add screenshots or screencasts of the incorrect state / behavior
description:Drag images / videos into the text input below
validations:
required:false
- type:textarea
attributes:
label:If applicable, attach your Zed.log file to this issue.
description:|
macOS: `~/Library/Logs/Zed/Zed.log`
Linux: `~/.local/share/zed/logs/Zed.log` or $XDG_DATA_HOME
If you only need the most recent lines, you can run the `zed: open log` command palette action to see the last 1000.
value:|
<details><summary>Zed.log</summary>
<!-- Click below this line and paste or drag-and-drop your log-->
```
```
<!-- Click above this line and paste or drag-and-drop your log--></details>
description:Check the backlog of issues to reduce the chances of creating duplicates; if an issue already exists, place a `+1` (👍) on it.
options:
- label:Completed
required:true
- type:textarea
attributes:
label:Describe the bug / provide steps to reproduce it
description:A clear and concise description of what the bug is.
label:Summary
description:Describe the bug with a one line summary, and provide detailed reproduction steps
value:|
<!-- Please insert a one line summary of the issue below -->
<!-- Include all steps necessary to reproduce from a clean Zed installation. Be verbose -->
Steps to trigger the problem:
1.
2.
3.
Actual Behavior:
Expected Behavior:
validations:
required:true
- type:textarea
id:environment
attributes:
label:Environment
description:Run the `copy system specs into clipboard` command palette action and paste the output in the field below. If you are unable to run the command, please include your Zed version and release channel, operating system and version, RAM amount, and architecture.
label:Zed Version and System Specs
description:'Open Zed, and in the command palette select "zed: Copy System Specs Into Clipboard"'
close-issue-message:"This issue was closed due to inactivity. If you're still experiencing this problem, please open a new issue with a link to this issue."
# We will increase `days-before-stale` to 365 on or after Jan 24th,
# 2024. This date marks one year since migrating issues from
# 'community' to 'zed' repository. The migration added activity to all
# issues, preventing 365 days from working until then.
@@ -37,6 +37,16 @@ We plan to set aside time each week to pair program with contributors on promisi
- Pair with us and watch us code to learn the codebase
- Low effort PRs, such as those that just re-arrange syntax, won't be merged without a compelling justification
## File icons
Zed's default icon theme consists of icons that are hand-designed to fit together in a cohesive manner.
We do not accept PRs for file icons that are just an off-the-shelf SVG taken from somewhere else.
### Adding new icons to the Zed icon theme
If you would like to add a new icon to the Zed icon theme, [open a Discussion](https://github.com/zed-industries/zed/discussions/new?category=ux-and-design) and we can work with you on getting an icon designed and added to Zed.
## Bird's-eye view of Zed
Zed is made up of several smaller crates - let's go over those you're most likely to interact with:
@@ -52,3 +62,9 @@ Zed is made up of several smaller crates - let's go over those you're most likel
- [`rpc`](/crates/rpc) defines messages to be exchanged with collaboration server.
- [`theme`](/crates/theme) defines the theme system and provides a default theme.
- [`ui`](/crates/ui) is a collection of UI components and common patterns used throughout Zed.
- [`cli`](/crates/cli) is the CLI crate which invokes the Zed binary.
- [`zed`](/crates/zed) is where all things come together, and the `main` entry point for Zed.
## Packaging Zed
Check our [notes for packaging Zed](https://zed.dev/docs/development/linux#notes-for-packaging-zed).
"ctrl-x ctrl-a":"assistant::InlineAssist",// zed specific
"ctrl-x ctrl-c":"editor::ShowInlineCompletion",// zed specific
"ctrl-x ctrl-c":"editor::ShowEditPrediction",// zed specific
"ctrl-x ctrl-l":"editor::ToggleCodeActions",// zed specific
"ctrl-x ctrl-z":"editor::Cancel",
"ctrl-w":"editor::DeleteToPreviousWordStart",
"ctrl-u":"editor::DeleteToBeginningOfLine",
"ctrl-t":"vim::Indent",
"ctrl-d":"vim::Outdent",
"ctrl-k":["vim::PushOperator",{"Digraph":{}}],
"ctrl-v":["vim::PushOperator",{"Literal":{}}],
"ctrl-k":["vim::PushDigraph",{}],
"ctrl-v":["vim::PushLiteral",{}],
"ctrl-shift-v":"editor::Paste",// note: this is *very* similar to ctrl-v in vim, but ctrl-shift-v on linux is the typical shortcut for paste when ctrl-v is already in use.
"ctrl-shift-v":"editor::Paste",// note: this is *very* similar to ctrl-v in vim, but ctrl-shift-v on linux is the typical shortcut for paste when ctrl-v is already in use.
// This crate was essentially pulled out verbatim from main `zed` crate to avoid having to run RustEmbed macro whenever zed has to be rebuilt. It saves a second or two on an incremental build.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
