This PR updates the `billing_subscriptions` table with some new columns
- `kind` - The kind of the description (used to denote Zed Pro vs
existing)
- `stripe_current_period_start` - The Stripe timestamp of when the
subscriptions current period starts
- `stripe_current_period_end` - The Stripe timestamp of when the
subscriptions current period ends
Release Notes:
- N/A
Co-authored-by: Mikayla <mikayla@zed.dev>
The `always_allow_tool_actions` setting would get overridden with the
default when we loaded each example project, leading to examples
stalling when they run a tool that needed confirmation. There's now a
separate `runner_settings.json` file where we can configure the
environment for the eval.
Release Notes:
- N/A
---------
Co-authored-by: Oleksiy <oleksiy@zed.dev>
This PR adds a new `ManageSubscriptionIntent` that allows uses to launch
a general-purpose billing portal session to manage their subscription.
Release Notes:
- N/A
Closes #ISSUE
Release Notes:
- Fixed a crash when screensharing on MacOS
Co-authored-by: Conrad <conrad@zed.dev>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
If you wanted to interrupt the current LLM response that's generating to
send a follow up message, you'd need to stop it first, type your new
message, and then send it. Now, you can just type your new message while
there's a response generating and send it. This will interrupt the
previous response generation and kick off a new one.
Release Notes:
- agent: Allow to send a new message while a response is generating,
interrupting the LLM to focus instead on the most recent prompt.
Previously we'd crash when deserializing a breakpoint whose row number
was out of bounds (could happen if the file was externally modified).
This PR fixes that code to skip such breakpoints.
An alternative would be to clip the deserialized `PointUtf16`, but I
think that would mostly result in nonsensical breakpoints.
Release Notes:
- N/A
This PR changes the thread list dropdown menu in the debugger UI to
eagerly preview the state of a thread when selecting it, instead of
waiting until confirming the selection.
Release Notes:
- N/A
To make DAP work over SSH we want to create the binary
at the project level (so we can wrap it in an `ssh` invocation
transparently).
This means not pushing the adapter down into the session, and resolving
more information ahead-of-time.
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Piotr <piotr@zed.dev>
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Piotr <piotr@zed.dev>
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Anthony <anthony@zed.dev>
This is just a refactor which adds no functionality.
We now return a `ToolResult` from `Tool > run(...)`. For now this just
wraps the output task in a struct. We'll use this to implement custom
rendering of tools, see #28621.
Release Notes:
- N/A
This PR adds a new field in the `MarkdownStyle` struct,
`heading_level_styles`, allowing, via the newly added function
`apply_heading_style` and struct `HeadingLevelStyles` to customize each
individual heading level in Markdown rendering/styling function.
Things like this should now be possible:
```rust
MarkdownStyle {
heading_level_styles: Some(HeadingLevelStyles {
h1: Some(TextStyleRefinement {
font_size: Some(rems(1.15).into()),
..Default::default()
}),
}),
..Default::default()
}
```
Release Notes:
- N/A
Depending on `git::commit` or `git::amend` action triggered, commit
modal opens up in appropriate mode, handling edge cases like if you are
already in amend mode, etc.
Release Notes:
- N/A
When we do not have any tools, we want to set the `tools` field to
`None`
Release Notes:
- Fixed an issue where Gemini requests would sometimes return a Bad
Request ("Invalid argument...")
This PR makes a debugger's pane layout persistent across session's that
use the same debug adapter.
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Cole Miller <m@cole-miller.net>
This is a combination of the "read file" and "list directory contents"
tools as part of a push to reduce our quantity of builtin tools by
combining some of them.
The functionality is all there for this tool, although there's room for
improvement on the visuals side: it currently always shows the same icon
and always says "Read" - so you can't tell at a glance when it's reading
a directory vs an individual file. Changing this will require a change
to the `Tool` trait, which can be in a separate PR. (FYI @danilo-leal!)
<img width="606" alt="Screenshot 2025-04-14 at 11 56 27 PM"
src="https://github.com/user-attachments/assets/bded72af-6476-4469-97c6-2f344629b0e4"
/>
Release Notes:
- Added `contents` tool
Follow-up to #28671
This primarily follows two ideas:
1. We currently take the element with the highest score which appears
last in the iterator (see
[`last_by_key`](https://doc.rust-lang.org/std/iter/trait.Iterator.html#method.max_by_key)),
so we can also just reverse the iterator and take the first highest
match instead.
2. Once we have a match with a given precedence, we are not interested
in any matches with a lower or even the same priority, given what was
established in 1. Thus, we also only have to check whether any language
checked afterwards has a higher priority match.
Furthermore, once we have a match with the highest possible precedence,
there is no need to look for any more possible matches. Thus, this PR
also adds short-circuiting for that scenario.
Lastly, I also cleaned-up the custom suffix match (an empty glob-set
will never match so no need to iterate there) as well reorder the
zip-call in the content matches, as we never need the content if there
is no first line pattern present for the checked languages.
Release Notes:
- N/A
Release Notes:
- Add support for OpenAI GPT-4.1 via Copilot Chat and OpenAI API
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
Release Notes:
- Fixed completions with multiple cursors leaving duplicated prefixes.
- Fixed crash when accepting a completion in a multibuffer with multiple
cursors.
- Vim: improved `single-repeat` after accepting a completion, now
pressing `.` to replay the completion will re-insert the completion text
at the cursor position.
This ensures that we respect the `LanguageModelToolSchemaFormat` value
when we call `tool.input_schema`. This prevents us from breaking Gemini
compatibility when adding/changing built-in tools. See #28634.
The test suite will now fail with an error message like this, when
providing an incompatible input_schema:
```
thread 'tests::test_tool_schema_compatibility' panicked at crates/assistant_tools/src/assistant_tools.rs:108:17:
Tool schema for `code_actions` is not compatible with `language_model::LanguageModelToolSchemaFormat::JsonSchemaSubset` (Gemini Models).
Are you using `schema::json_schema_for<T>(format)` to generate the schema?
```
Release Notes:
- N/A
Ended up not making this one visible only upon hover or something
because the layout alignment would be weird given the list item spans
the full width. So, experimenting with this design here:
<img
src="https://github.com/user-attachments/assets/62bf661e-1aae-4644-8a89-49cefb3e8130"
width="700" />
Release Notes:
- agent: Add scrollbar to the history view.
Closes#28475
Updates `rename` and `code_action` `input_schema` methods to use
`json_schema_for<T>()` which transforms standard JSONSchema into the
subset required by Gemini.
Also makes `input_schema` implementations consistent.
Tested tools against Gemini 2.5 Pro Preview, Zed Claude 3.7 Sonnet
Thinking, o3-mini
Release Notes:
- Agent Beta: Fixed error 400 `INVALID_ARGUMENT` when using Gemini with
`code_actions` or `rename` tools enabled.
When you hit the back button in the agent panel toolbar, we were
returning the focus to the buffer instead to the panel's message editor,
which is likely where you want to be after quickly checking history or
settings.
Release Notes:
- N/A
Allow expanding the message editor while the agent panel is not focused,
right now there is no effect when you use the button from another focus
Release Notes:
- N/A
While working on #28670 this function showed up in my profiles; this PR
makes it evaluate some of it's conditions lazily + prevent constant
rebuilding of globset::Candidates.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
This PR fixes a minor regression introduced in #27718, where snippets
stopped working when the language was set to plaintext because
`languages_at` doesn't include plaintext, while `language_at` does.
Release Notes:
- Fixed plaintext snippets not working
Closes#28638
This PR fixes markdown selection for the info and diagnostic popovers.
In the editor popover, after the changes in
https://github.com/zed-industries/zed/pull/28255, the markdown selection
state updates correctly, but it no longer triggers the editor element to
repaint like it used to. This is fixed by adding a subscription to
listen for markdown entity changes and triggering a repaint for the
editor.
I assume markdown selection works elsewhere because:
1. Either the `Markdown` entity is directly part of a struct that
implements the `Render` trait, causing it to repaint whenever the
markdown state changes. See
[here](d1ffda9bfe/crates/ui_prompt/src/ui_prompt.rs (L65)).
2. OR it's wrapped around component like Popover which implements
`RenderOnce` trait. See
[here](d1ffda9bfe/crates/editor/src/code_context_menus.rs (L645)).
Whereas info and diagnostic popovers does not do both. I do think we can
change it to use `Popover` component, but for now this works as quick
fix.
Extras:
- Remove unnecessary struct cloning.
- Refactor rendering logic to use `when_some`.
Release Notes:
- Fixed issue where selection wasn't working for info and diagnostic
popovers.
This fixes an issue where tasks in `.vscode/tasks.json` weren't being
loaded at startup of a project
Closes#28494
Release Notes:
- Tasks are now loaded from local `.vscode/tasks.json` files even if
they are `.gitignore`d
Avoids building a whole git2 repository object at the worktree layer
just to watch some additional paths.
- [x] Tidy up names of the various paths
- [x] Tests for worktrees and submodules
Release Notes:
- N/A
This PR splits up the rendering of the message editor into multiple
functions. Previously we had a single `h_flex()...` expression which
spanned across 550 lines, `cargo fmt` stopped working.
Release Notes:
- N/A
Release Notes:
- agent: Show recommended models in the agent model selector and display
the provider in the model selector's trigger.
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Co-authored-by: Danilo Leal <67129314+danilo-leal@users.noreply.github.com>
Closes#21541Closes#22726
This should fix snippets in languages, like PHP, that are based on the
HTML syntax layer. To be honest, I don't totally get where HTML comes
into it, but the issues outlined in #21541 and #22726 both boil down to
"Zed only shows me HTML snippets in PHP/ERB files; I expected to see
PHP/ERB snippets". This solution is based on the comments between
@mrnugget and @osiewicz in #22726: resolve/combine snippets for all
language layers at the given position, whereas current behavior is to
resolve snippets only for the `.last()` language layer at the given
position.
- add `Buffer:languages_at()` (note the plural)
- update `snippet_completions()` in `editor.rs` to loop over each
language, gathering snippets as it goes
- the primary logic for resolving snippets within a single language has
not changed
### Verifying this change
I couldn't find tests related to snippet and currently active languages
(CI may show them to me 😆 ) but I can add some if desired and w/ perhaps
a little coaching or prompting about another test to look to for
inspiration. I have confirmed that this works for PHP, but I have not
checked ERB because I'm not familiar with it or set up for it.
To check this manually:
1. install the PHP extension
2. install at least 1 snippet for each of html, php and phpdoc. If you
don't have any, these should work:
```sh
# BEWARE these will clobber existing snippets!
echo '{"dddd":{"body":"hello from phpdoc"}}' > ~/.config/zed/snippets/phpdoc.json
echo '{"pppp":{"body":"hello from PHP"}}' > ~/.config/zed/snippets/php.json
echo '{"hhhh":{"body":"hello from HTML"}}' > ~/.config/zed/snippets/html.json
```
3. open any PHP file. If you don't have one, here's one that should
work:
```php
<?php
/**
*
*/
function function_name()
{
}
```
4. Place your cursor in a PHPdoc comment (eg after the `/**` on line 3)
- you should be able to use the `dddd`, `pppp` and `hhhh` snippets; on
`main`, only the `dddd` snippet works here
5. Move your cursor to a non-comment PHP area (eg after the `{` on line
7)
- you should be able to use the `pppp` and `hhhh` snippets, but not
`dddd`; on `main`, only `hhhh` works here
### Performance
This adds 2 separate (not nested) loops to `snippet_completions()`, each
of which will iterate over the active language scopes at the given
location. I have not looked into the specifics of how many layers most
languages have, but I suspect that *most* users will see identical
performance as before because there will only be 1 scope active most of
the time.
In some cases, though (eg PHP, ERB, maybe template strings in JS), the
editor will be looping over more layers, possibly many in some deeply
injected/embedded cases (I'm thinking of a regex template string in a JS
heredoc string in a PHP script in an HTML file). I don't expect this to
be an issue – nor has it been in my usage and testing – but performance
of snippets could be affected in pathological cases.
### Alternate solutions
Instead of resolving snippets for *all* layers, we could just change how
we pick which language to resolve. Instead of always using `.last()`,
perhaps we could do something more clever. This feels like it could be
tricky and potentially error prone, though.
Release Notes:
- Snippets are now resolved for all languages active at the cursor
location.
- Fixed snippets in PHP, ERB and other languages whose syntax layers are
based on HTML
This PR updates the snake_case check for grammar names to use `heck`
instead of `convert_case`.
`heck` correctly handles values like `d2`.
Fixes https://github.com/zed-industries/zed/issues/28583.
Release Notes:
- Updated snake_case check for grammar names in extensions.
While working on implementing `add_recent_documents` for Windows, I
found that the process is significantly more complex compared to macOS.
On macOS, simply registering the `add_recent_documents` function is
enough, as the system handles everything automatically.
On Windows, however, there are two cases to consider:
- **Files opened by the app**: These appear in the "Recent" section (as
shown in the screenshot, "test.txt") and are managed automatically by
Windows (by setting windows registry), similar to macOS.
- **Folders opened by the app**: This is more complicated because
Windows does not handle it automatically, requiring the application to
track opened folders manually.
To address this, this PR introduces a `History Manager` along with
`HistoryManagerEvent::Update` and `HistoryManagerEvent::Delete` events
to simplify the process of managing recently opened folders.
https://github.com/user-attachments/assets/a2581c15-7653-4faf-96b0-7c48ab1dcc8d
Release Notes:
- N/A
---------
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
In https://github.com/zed-extensions/haskell/pull/2 the HLS settings
were updated to respect binary path/argument overrides. This PR just
updates the docs to demonstrate this.
Release Notes:
- N/A
---------
Co-authored-by: Peter Tripp <peter@zed.dev>
Improve the logic in around release artifact bundling.
- Suppress a harmless "error: no such command: `about`" from
script/generate-licenes output
- Remove checks for main branch (which will never be true)
- Only run `Upload Artifacts to release` when not using `run-bundling`.
Prevents the creation of draft releases with just linux remote server binaries)
Release Notes:
- N/A
Closes#27731
Uses similar logic as other popovers for layouting signature help
popover.
Release Notes:
- Fixed case where signature help popover goes off the screen.
This PR fixes a bug when deleting a breakpoint with a (log, conditional,
hit condition) message by removing the message. All breakpoints that
contain that type of message were also deleted.
Release Notes:
- N/A
Fixes a regression introduced in
https://github.com/zed-industries/zed/pull/28377 where the pending hunks
didn't get cleared properly when staging/unstaging hunks remotely. I
didn't add new tests, because the fix was to simplify some code.
Release Notes:
- N/A
Closes#7903
Release Notes:
- Add new actions `editor::FindNextMatch` and
`editor::FindPreviousMatch` that are similar to `editor::SelectNext` and
`editor::SelectPrevious` with `"replace_newest": true`, but jumps to the
first or last selection when there are multiple selections.
This PR cleans up the thread auto-capturing added in #28271.
- Removed usage of `unsafe`
- Fixed feature flag check
- We were incorrectly not respecting the feature flag in release builds
- Made sure the telemetry event was being run on the background executor
Release Notes:
- N/A
Earlier, I merged #24723
Before merging it, I made a change that was incorrect and fast followed
with a fix: #28548
Following that fix, @bennetbo discovered that the modals where no longer
highlighting correctly, particularly the outline modal.
So I'm going to revert it all.
Release Notes:
- N/A
This PR allows expanding the message editor textarea to fit almost the
total height of the Agent Panel. Stylistically, I'm also changing the
font family we use in the textarea to use the buffer font; want to
experiment with this for a bit.
Release Notes:
- agent: The Agent Panel textarea can now be expanded to fill almost the
total height of the panel.
---------
Co-authored-by: Bennet Bo Fenner <bennet@zed.dev>
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
Release Notes:
- Fixed a regression that caused the agent to hang sometimes.
---------
Co-authored-by: Thomas Mickley-Doyle <tmickleydoyle@gmail.com>
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Michael Sloan <mgsloan@gmail.com>
This PR lightly refactors the `EditorMode::Full` exposing two new
methods: `is_full` and `set_mode`.
Motivation is to expose fields that modify the behavior when the editor
is in `Full` mode. By using is `mode.is_full()` instead of
`EditorMode::Full` we can introduce new fields without breaking other
places in the code.
Release Notes:
- N/A
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
Fixes https://github.com/zed-industries/zed/issues/26039
Release Notes:
- Fixed an issue where diffs stopped updating closing and reopening them
after staging hunks.
- Fixed a bug where staging a hunk while the cursor was in a deleted
line would move the cursor erroneously.
---------
Co-authored-by: Cole Miller <m@cole-miller.net>
Co-authored-by: João Marcos <marcospb19@hotmail.com>
Release Notes:
- N/A
---
Fix this long-standing issue so that we can support Link hover colors.
And renamed `text_layout` example to `text_style`.
---
I spent some time studying the process of this text style change and
found it a bit complicated.
At first, I thought there was a problem with refine and it was not
passed properly. After changing it, I found that it was not the problem.
Then I found that it was because `TextRun` had already stored the
`color`, `background`, `underline`, `strikethrough` in TextRun in the
`request_layout` stage. They area calculate at the `request_layout`
stage, but request_layout stage there was no `hitbox`, so the hover
state was not obtained.
```bash
cargo run -p gpui --example text_style
```
https://github.com/user-attachments/assets/24f88f73-775e-41d3-a502-75a7a39ac82b
---------
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
The debug console will now show an indicator when it's unopened and
there's unread messages.
`NewSessionModal` attempts to resolve debug configurations before using
the config to start debugging. This allows users to use zed's task
variables in the modal prompt.
I had to invert tasks_ui dependency on debugger_ui so `NewSessionModal`
could get the correct `TaskContexts` by calling tasks_ui functions. A
consequence of this workspace has a new event `ShowAttachModal` that I'm
not a big fan of. @osiewicz if you have time could you please take a
look to see if there's a way around adding the event. I'm open to pair
on it too.
Release Notes:
- N/A
Reimplemented logic from `env_logger` to parse log configuration from
environment variables.
Had to re-implement instead of using `env_filter` crate that
`env_logger` uses, as it does not export the information required to
integrate it.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Move the SetLayeredWindowAttributes call to immediately after window
construction, and initialize it with per-pixel transparency settings, no
color key and no global blending. The render pipeline will perform alpha
blending during compositing.
Cleaned up the DWM acrylic API calls some, to explicitly set to the
three appropriate modes depending on opaque, transparent or blurred
settings. The API internally hides versioning concerns from the caller.
Set the window class background color to black, this prevents a
flashbang on slow startup, e.g. debug builds on a heavily loaded system.
The outcome is that the window no longer receives paint demands for
underlying window updates, while also having per-pixel transparency -
opaque theme elements are now correctly opaque. The transparency
settings are now portable across windows and macOS having mostly similar
outcomes (modulo palette differences). Small fonts may still appear to
be alpha blended - this seems to be in the glyph atlas, their pixels are
not actually opaque. Larger fonts (or higher DPIs) don't suffer this and
are as opaque as expected. Layering the window atop one that is
rendering at 120fps, the editor window can drop to its 8fps idle state,
while still being composited with 120fps alpha blend in the background,
in both blur and transparent modes.
Updates #20400
Release Notes:
- Improved transparency on Windows to be more efficient, support fully
opaque elements and more closely match other platforms.
This PR introduces support for a `--user-data-dir` CLI flag to override
Zed's data directory and proposes renaming `support_dir` to `data_dir`
for better cross-platform clarity. It builds on the discussion in #25349
about custom data directories, aiming to provide a flexible
cross-platform solution.
### Changes
The PR is split into two commits:
1. **[feat(cli): add --user-data-dir to override data
directory](28e8889105)**
2. **[refactor(paths): rename support_dir to data_dir for cross-platform
clarity](affd2fc606)**
### Context
Inspired by the need for custom data directories discussed in #25349,
this PR provides an immediate implementation in the first commit, while
the second commit suggests a naming improvement for broader appeal.
@mikayla-maki, I’d appreciate your feedback, especially on the rename
proposal, given your involvement in the original discussion!
### Testing
- `cargo build `
- `./target/debug/zed --user-data-dir ~/custom-data-dir`
Release Notes:
- Added --user-data-dir CLI flag
---------
Signed-off-by: Marko Kungla <marko.kungla@gmail.com>
allow DisplayId to be compared to u32. This is handy since gpui doesn't
provide a method to detect current active display of the user. So when
using mouse location to get the active display we need to then compare
that display u32 to DisplayID
Release Notes:
- added From to allow u32 comparison
Optimize away a multiplication during in the `coalesce` function. Our
goal is to check whether the sign of two floats is the same.
Instead of multiplying each `.signum()` and checking that the result is
positive, we can simply check that the signum's are the same. This
removes a float multiplication.
```rust
a.signum() * b.signum() >= 0.0
```
turns into
```rust
a.signum() == b.signum()
```
Release Notes:
- Fix documentation for `Pixels::signum`
Closes#13344
This PR causes required features to be read from `cargo metadata` and
enabled when executing an example/bin in Rust.
Release Notes:
- Added enabling required features when executing a Rust example or bin
through a task
Closes#25586
It is caused due to assumption all character being typed are word
characters and linked edit ranges can be used even when first non-word
character is typed. Because next character passes all the criteria like
being word character, anchor matching the previous range before typing
started, wrong edit take place.
This PR fixes it by clearing linked edit ranges when non-word character
is typed.
Before:
`<div cx^></div>cx` when typing fast.
After:
`<div cx^></div>` always.
Release Notes:
- Fixed a case where extra characters were being written at the end of
an HTML tag.
Closes#22692
Makes it so when undoing a format operation, the selections are set to
where they were at the last edit.
Release Notes:
- Made it so the cursor position is reset to where it was after the last
edit when undoing a format operation. This will only result in different
behavior when you make an edit, scroll away, initiate formatting (either
by saving or manually) and then undo the format.
---------
Co-authored-by: Zed AI <ai@zed.dev>
This regressed in #27568, oops.
Release Notes:
- Fixed a bug causing conflicted files in the git panel to jump to the
"Tracked" section as soon as they were staged.
Release Notes:
- agent: Replace `bash` tool with `terminal` tool which uses the current
shell
---------
Co-authored-by: Bennet <bennet@zed.dev>
Co-authored-by: Antonio <antonio@zed.dev>
Also, we moved the logic for driving the agentic loop into `Thread` so
that we don't have to re-implement it.
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Closes#23449
Release Notes:
- Fixed a bug causing shift to get stuck down when the window focus
changes
---------
Co-authored-by: Dino <dinojoaocosta@gmail.com>
Update the `Vim::replace_command` method so as to reset the range in the
`BufferSearchBar` after running the replacement in order to fix the
issue where the number of matches in the search bar would be incorrect
after the replacement was done, as it would only take into consideration
the range in which the replacement happened, instead of the whole
buffer.
In order to get this working a new
`BufferSearchBar::clear_search_within_ranges` method is introduced in
these changes.
Release Notes:
- Fixed the number of matches displayed in the search bar after running
vim's substitute command.
Having a separate rename tool seems to make the agent more likely to use
it compared to having it be part of the code actions tool.
Release Notes:
- Added code action tool and rename tool.
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [indexmap](https://redirect.github.com/indexmap-rs/indexmap) |
workspace.dependencies | minor | `2.8.0` -> `2.9.0` |
---
### Release Notes
<details>
<summary>indexmap-rs/indexmap (indexmap)</summary>
###
[`v2.9.0`](https://redirect.github.com/indexmap-rs/indexmap/blob/HEAD/RELEASES.md#290-2025-04-04)
[Compare
Source](https://redirect.github.com/indexmap-rs/indexmap/compare/2.8.0...2.9.0)
- Added a `get_disjoint_mut` method to `IndexMap`, matching Rust 1.86's
`HashMap` method.
- Added a `get_disjoint_indices_mut` method to `IndexMap` and
`map::Slice`,
matching Rust 1.86's `get_disjoint_mut` method on slices.
- Deprecated the `borsh` feature in favor of their own `indexmap`
feature,
solving a cyclic dependency that occured via `borsh-derive`.
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMzguMCIsInVwZGF0ZWRJblZlciI6IjM5LjIzOC4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
## Description
In https://github.com/zed-industries/zed/pull/27213 the new feature for
setting env variables for LSPs was added but env vars passed from an
instance of `ExtensionLspAdapter` are lost now. This means if an
extension returns any env variable like this:
```rust
zed::Command {
command: some_command,
args: some_args,
env: vec![("A", "value_for_a")],
}
```
The env variable `A` will never be used by `LspStore`. This commit
preserves env variables passed from an instance of
`ExtensionLspAdapter`.
After this change overwriting of env variables
happens in the following order:
```plaintext
shell <- variables from an extension <- variables from settings
```
## How to reproduce
Allow any extension to return a `zed::Command` with environment
variables to Zed. You can use [this
branch](https://github.com/zed-extensions/ruby/pull/48) for the Ruby
extension:
1. Check out the branch and install the dev version of the Ruby
extension.
2. Ensure you have the `solargraph` LSP configured and enabled for the
Ruby extension. This LSP is enabled by default in Zed and in the Ruby
extension.
3. Make sure you don’t have `solargraph` installed in your user gemset.
4. Open any Ruby project, such as [this
one](https://github.com/vitallium/stimulus-lsp-error-zed).
5. Open a Ruby file and wait for the error message about failing to
start `solargraph`. It should look like this or something similar:
```
[2025-04-05T23:17:26+02:00 ERROR project::lsp_store] server stderr: "/Users/vslobodin/.local/share/mise/installs/ruby/3.4.1/lib/ruby/site_ruby/3.4.0/rubygems.rb:262:in 'Gem.find_spec_for_exe': can't find gem solargraph (>= 0.a) with executable solargraph (Gem::GemNotFoundException)\n\tfrom /Users/vslobodin/.local/share/mise/installs/ruby/3.4.1/lib/ruby/site_ruby/3.4.0/rubygems.rb:281:in 'Gem.activate_bin_path'\n"
```
This error occurs because the Ruby extension passes the `GEM_PATH`
environment variable to specify the location of Ruby gems. Without it,
Zed tries to spawn the `solargraph` gem in the user's gemset scope. Ruby
fails to start it because the `solargraph` gem is not installed in the
user gemset but in the extension directory. By setting the `GEM_PATH`
environment variable, Ruby searches additional locations to start the
`solargraph` LSP.
I hope I've described it correctly. Please let me know if you need more
information. Thanks!
Release Notes:
- Fixed the issue where environment variables from `ExtensionLspAdapter`
were lost
This Pull Request updates the default behavior of the substitute (`s`)
command in vim mode to only replace the next match by default, instead
of all, and replace all matches only when the `g` flag is provided,
making it more similar to NeoVim's behavior.
In order to achieve this, the following changes were introduced:
- Update `BufferSearchBar::replace_next` to be a public method, so it
can be called from `Vim::replace_command` .
- Update the `Replacement::parse` to set the `should_replace_all` field
to `false` by default, and only set it to `true` if the `'g'` flag is
present in the query.
- Add support for when the `Replacement.should_replace_all` is set to
`false` in `Vim::replace_command`, so as to have it only replace the
next occurrence instead of all occurrences in the line.
- Introduce `BufferSearchBar::select_first_match` so as to activate the
first match on the line under the cursor.
Closes#24450
Release Notes:
- Improved vim's substitute command so as to only replace the first
match by default, and replace all matches if the `'g'` flag is provided
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
I wrote the test wrongly in
https://github.com/zed-industries/zed/pull/28005:
It should be `$` instead of `shift-4`, so it was just yanking from the
middle of the line instead of the newline character. Fixed it and
regenerated it.
Release Notes:
- N/A
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
|
[actions/dependency-review-action](https://redirect.github.com/actions/dependency-review-action)
| action | digest | `3b139cf` -> `67d4f4b` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMzguMCIsInVwZGF0ZWRJblZlciI6IjM5LjIzOC4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [mimalloc](https://redirect.github.com/purpleprotocol/mimalloc_rust) |
dependencies | patch | `0.1.45` -> `0.1.46` |
---
### Release Notes
<details>
<summary>purpleprotocol/mimalloc_rust (mimalloc)</summary>
###
[`v0.1.46`](https://redirect.github.com/purpleprotocol/mimalloc_rust/releases/tag/v0.1.46):
Version 0.1.46
[Compare
Source](https://redirect.github.com/purpleprotocol/mimalloc_rust/compare/v0.1.45...v0.1.46)
##### Changes
- Fixed musl builds.
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMjcuMyIsInVwZGF0ZWRJblZlciI6IjM5LjIzOC4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
## Summary
### Actions
This PR implements actions that allow a user to "run to cursor" and
"evaluate selected text" while there's an active debug session and
exposes the functionality to the UI as well.
- Run to cursor: Can be accessed by right clicking on the gutter
- Evaluate selected text: Can be accessed by selecting text then right
clicking in the editor
### Bug fixes
I also fixed these bugs as well
- Panic when using debugger: Stop action
- Debugger actions command palette filter not working properly in all
cases
- We stopped displaying the correct label in the session's context menu
when a session was terminated
Release Notes:
- N/A
---------
Co-authored-by: Max Brunsfeld <max@zed.dev>
Co-authored-by: Remco Smits <djsmits12@gmail.com>
This PR updates an outdated keybind for opening the extensions page (the
shown keybind opens the project panel instead) on the `Configuring
Languages` page.
It also updates a nearby keybind to use the preprocessor syntax instead.
Release Notes:
- N/A
Release Notes:
- Added the user reaction (👍 or 👎) to each agent response.
- 👎 will trigger a comment box linked to the response
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Co-authored-by: Agus Zubiaga <hi@aguz.me>
`UnfoldAt` and `FoldAt` are used internally, and don't really work
when users try to trigger them, they do however appear in the command
palette and keybindings, misleading users to try using them.
Release Notes:
- Remove unused actions `UnfoldAt` and `FoldAt` (prefer `Fold` and
`Unfold`).
Motivation for this change is to use `ContextStore` in headless
assistant, which requires it to not depend on UI entities like
`Workspace`.
This reapplies a change that was revert was in #28428, and fixes the panic.
Release Notes:
- N/A
Closes#25941
Release Notes:
- Corrected SoftTab indentation handling for lines with mixed spaces and
tabs across .go files and other file types.
- Renamed the editor test `test_tab_with_mixed_whitespace` to
`test_tab_with_mixed_whitespace_rust` as it only tested this behavior
for Rust buffers, which have auto-indentation support. This change
clarifies that the test does not cover default files without
language-specific features.
- Added a new editor test `test_tab_with_mixed_whitespace_txt` to ensure
proper coverage for files with no associated language.
While investigating the issue — initially thought to be Go-related — I
discovered that the underlying problem was how soft tabs were calculated
in `Editor::tab`, given that the problem could also be observed on
`.txt` files
The correct soft tab indentation is now determined by treating all `\t`
characters before the cursor (on the same row) as new indentation
levels, resetting the remainder counter accordingly.
https://github.com/user-attachments/assets/78192e98-2b81-43cb-ae6f-7c48cd17d168
This reverts commit f12a554f86, which
introduced a panic in inline assistant (cc @mgsloan) - I'm not sure what
the motivation was for that change, but I figure we can revert to fix
the inline assistant now and deal with that later. 😄
Panic was:
> Thread "main" panicked with "cannot read workspace::Workspace while it
is already being updated" at
/Users/rtfeldman/code/zed/crates/gpui/src/app/entity_map.rs:139:32
Release Notes:
- N/A
Trying out sending the model a reminder message about code blocks in the
system prompt. If this seems to work well, we can include more specific
reminder messages, e.g. tool-specific ones.
Release Notes:
- N/A
A small addition for those coming from JetBrain's IDEs. A behavioral
detail: when any upper case character is detected, the command defaults
to toggling to lower case.
> Note that when you apply the toggle case action to the CamelCase name
format, IntelliJ IDEA converts the name to the lower case.
https://www.jetbrains.com/help/idea/working-with-source-code.html#edit_code_fragments
Release Notes:
- Added an `editor: toggle case` command. Use `cmd-shift-u` for macOS
and `ctrl-shift-u` for Linux, when using the `JetBrains` keymap.
Was chatting with @wilhelmklopp, he pointed out that our current
UI-accessible way to access the project search was pretty obscure.
<img width="393" alt="Screenshot 2025-04-08 at 6 57 51 PM"
src="https://github.com/user-attachments/assets/636053cd-5a88-4a5e-8155-6d41d189b7db"
/>
Release Notes:
- Added a button to open the project search to the status bar
Adds actions so you can have customized keybindings for `insert` and
`replace` modes.
And add `shift-enter` as a default for `replace`, this will override the
default setting
`completions.lsp_insert_mode` which is set to `replace_suffix`, which
tries to "smartly"
decide whether to replace or insert based on the surrounding text.
For those who come from VSCode, if you want to mimic their behavior, you
only have to
set `completions.lsp_insert_mode` to `insert`.
If you want `tab` and `enter` to do different things, you need to remap
them, here is
an example:
```jsonc
[
// ...
{
"context": "Editor && showing_completions",
"bindings": {
"enter": "editor::ConfirmCompletionInsert",
"tab": "editor::ConfirmCompletionReplace"
}
},
]
```
Closes#24577
- [x] Make LSP completion insertion mode decision in guest's machine
(host is currently deciding it and not allowing guests to have their own
setting for it)
- [x] Add shift-enter as a hotkey for `replace` by default.
- [x] Test actions.
- [x] Respect the setting being specified per language, instead of using
the "defaults".
- [x] Move `insert_range` of `Completion` to the Lsp variant of
`.source`.
- [x] Fix broken default, forgotten after
https://github.com/zed-industries/zed/pull/27453#pullrequestreview-2736906628,
should be `replace_suffix` and not `insert`.
Release Notes:
- LSP completions: added actions `ConfirmCompletionInsert` and
`ConfirmCompletionReplace` that control how completions are inserted,
these override `completions.lsp_insert_mode`, by default, `shift-enter`
triggers `ConfirmCompletionReplace` which replaces the whole word.
Closes #ISSUE
Release Notes:
- Fixed a panic that could occur when paths changed in the project diff.
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
(and any other LSP server in theory, if it exposes any LSP-ext endpoint
for the same)
Closes https://github.com/zed-industries/zed/issues/16160
* adds a way to disable tree-sitter tasks (the ones from the plugins,
enabled by default) with
```json5
"languages": {
"Rust": "tasks": {
"enabled": false
}
}
}
```
language settings
* adds a way to disable LSP tasks (the ones from the rust-analyzer
language server, enabled by default) with
```json5
"lsp": {
"rust-analyzer": {
"enable_lsp_tasks": false,
}
}
```
* adds rust-analyzer tasks into tasks modal and gutter:
<img width="1728" alt="modal"
src="https://github.com/user-attachments/assets/22b9cee1-4ffb-4c9e-b1f1-d01e80e72508"
/>
<img width="396" alt="gutter"
src="https://github.com/user-attachments/assets/bd818079-e247-4332-bdb5-1b7cb1cce768"
/>
Release Notes:
- Added tasks from rust-analyzer
Release Notes:
- Adjusted system prompt to direct it to never act on TODO-type comments
it encounters, unless the user directly asked it to do so or they relate
to the current task at hand.
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Piotr Osiewicz <piotr@zed.dev>
fixes issue where:
In a two line python file like so
```
Path()
```
If the user asks for code actions on `Path` and they select (`From
pathlib import path`)
the result they get is
```
Pathfrom pathlib import Path
Path()
```
Instead of
```
from pathlib import Path
Path()
```
This is due to a non-lsp-spec-compliant response from pyright below
```json
{"jsonrpc":"2.0","id":40,"result":[{"title":"from pathlib import Path","edit":{"changes":{"file:///Users/neb/Zed/example-project/pyright-project/main.py":[{"range":{"start":{"line":2,"character":0},"end":{"line":2,"character":4}},"newText":"Path"},{"range":{"start":{"line":2,"character":0},"end":{"line":2,"character":0}},"newText":"from pathlib import Path\n\n\n"}]}},"kind":"quickfix"}]}
```
Release Notes:
- Fixed an issue when using auto-import code actions provided by pyright
(or basedpyright) where the import would be jumbled with the scoped
import resulting in an invalid result
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
This also increases the threshold for when we return an outline during
`read_file`.
Release Notes:
- Fixed an issue that caused the agent to fail reading large files if
the LSP hadn't started yet.
Release Notes:
- Adjusted system prompt to direct it to never remove tests as a way to
have the test suite pass, unless the user directly asks for test
removal.
Make various improvements to our github issue templates.
- Adjust line lengths to not wrap in constrained new issue view (85
cols) not just full screen view (95 columns)
- Remove reference to drag/drop logs to upload (recently multiple issues
with dead upload links)
- Cleanup list view
Release Notes:
- N/A
The bash tool will now truncate its output to 8192 bytes (or the last
newline before that).
We also added a global limit for any tool that produces a clearly large
output that wouldn't fit the context window.
Release Notes:
- agent: Truncate bash tool output
---------
Co-authored-by: Michael Sloan <mgsloan@gmail.com>
This PR adds colors to debug panel's session menu that indicate the
state of each respective session. It also adds a close button to each
entry.
green - running
yellow - stopped
red - terminated/ended
Release Notes:
- N/A
If you attempt to load a git diff which includes a non utf-8 file,
previously
(1) the entire contents of the file was logged as ordinals and
(2) a second spurious error was logged
```
2025-04-07T16:21:28.392845-04:00 [ERROR] FromUtf8Error { bytes: [0, 1, 0, 0, 0, 19, 1, 0, 0, 4, 0, 48, 68, 83, 73, 71, 0, 0, 0, 1, 0, 2, 241, 204, 0, 0, 0, 8, 71, 68, 69, 70, 164, 172, 164, ...
[2025-04-07T17:12:16-04:00 ERROR git::repository] Error loading index text: invalid utf-8 sequence of 1 bytes from index 35
```
Having 1MB binary file in a commit would generate ~3MB-5MB of log
output.
Discovered while investigating
https://github.com/zed-industries/zed/issues/28241
Release Notes:
- git: Fixed an issue where non-UTF8 files in a git diff would generate
log spam.
We're seeing panics caused by a buggy implementation of AsyncWrite
that is being passed to rustls:
https://github.com/rustls/rustls/issues/2316#issuecomment-2662838186
One hypothesis was that we're using (comparatively) non-standard async
tools for connecting over websockets; so this attempts to make us be
(comparitvely) more standard.
Release Notes:
- N/A
Problem:
When yanking in visual line on the newline char, the next line gets
yanked as well:
https://github.com/user-attachments/assets/40f332dd-19f5-445f-a30f-39d50167c46f
Changes:
Similar to visual delete, exclude the newline char from the selection in
line mode.
Release Notes:
- vim: Fixed visual line yank while on the newline character yanking
following line
Taken from:
https://github.com/jeetsukumaran/vim-indentwise?tab=readme-ov-file#movements-by-relative-indent-depth
> [- : Move to previous line of lesser indent than the current line.
> [+ : Move to previous line of greater indent than the current line.
> [= : Move to previous line of same indent as the current line that is
separated from the current line by lines of different indents.
> ]- : Move to next line of lesser indent than the current line.
> ]+ : Move to next line of greater indent than the current line.
> ]= : Move to next line of same indent as the current line that is
separated from the current line by lines of different indents.
Release Notes:
- vim: Added indent-wise motions `] -/+/=`
We cannot compare versions and anchors between different `Buffer`s with
different `BufferId`s.
Release Notes:
- Fixed Zed panicking on editor reopen
Co-authored-by: Conrad Irwin <conrad@zed.dev>
Sometimes agents do this. I've had some success responding by telling it
not to do this, so trying out having it in the system prompt.
Release Notes:
- Adjusted the system prompt to avoid incomplete code generation.
Co-authored-by: João Marcos <marcospb19@hotmail.com>
Release Notes:
- Fixed a panic with completions around non-ASCII code
---------
Co-authored-by: João Marcos <marcospb19@hotmail.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [tokio](https://tokio.rs)
([source](https://redirect.github.com/tokio-rs/tokio)) | dependencies |
patch | `1.44.1` -> `1.44.2` |
| [tokio](https://tokio.rs)
([source](https://redirect.github.com/tokio-rs/tokio)) |
workspace.dependencies | patch | `1.44.1` -> `1.44.2` |
### GitHub Vulnerability Alerts
####
[GHSA-rr8g-9fpq-6wmg](https://redirect.github.com/tokio-rs/tokio/pull/7232)
The broadcast channel internally calls `clone` on the stored value when
receiving it, and only requires `T:Send`. This means that using the
broadcast channel with values that are `Send` but not `Sync` can trigger
unsoundness if the `clone` implementation makes use of the value being
`!Sync`.
Thank you to Austin Bonander for finding and reporting this issue.
---
### Release Notes
<details>
<summary>tokio-rs/tokio (tokio)</summary>
###
[`v1.44.2`](https://redirect.github.com/tokio-rs/tokio/releases/tag/tokio-1.44.2):
Tokio v1.44.2
[Compare
Source](https://redirect.github.com/tokio-rs/tokio/compare/tokio-1.44.1...tokio-1.44.2)
This release fixes a soundness issue in the broadcast channel. The
channel
accepts values that are `Send` but `!Sync`. Previously, the channel
called
`clone()` on these values without synchronizing. This release fixes the
channel
by synchronizing calls to `.clone()` (Thanks Austin Bonander for finding
and
reporting the issue).
##### Fixed
- sync: synchronize `clone()` call in broadcast channel ([#​7232])
[#​7232]: https://redirect.github.com/tokio-rs/tokio/pull/7232
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "" in timezone America/New_York,
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about these
updates again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMjcuMyIsInVwZGF0ZWRJblZlciI6IjM5LjIyNy4zIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This should make it possible to more reliably symbolicate crash reports
from nightly, and from users with pending auto-updates.
Release Notes:
- N/A
---------
Co-authored-by: Ben Kunkle <ben.kunkle@gmail.com>
There were two bugs that caused the gdb adapter not to work properly,
one on our end and one their end.
The bug on our end was sending `stopOnEntry: null` in our launch request
when stop on entry had no value. I fixed that bug across all dap
adapters
The other bug had to do with python's "great" type system and how we
serialized our unit structs to json; mainly,
`ConfigurationDoneArguments` and `ThreadsArguments`. Gdb seems to follow
a pattern for handling requests where they pass `**args` to a function,
this errors out when the equivalent json is `"arguments": null`.
```py
@capability("supportsConfigurationDoneRequest")
@request("configurationDone", on_dap_thread=True)
def config_done(**args): ### BUG!!
...
```
Release Notes:
- N/A
Release Notes:
- agent: The history view is now more easily accessible via the icon
button in the Agent Panel toolbar.
---------
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
This PR simplifies the button to send a new message as well as the
"generation" display design.
Release Notes:
- N/A
---------
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
This PR fixes an issue where mouse selection in the terminal would be
offset when the Terminal Inline Assistant was active. The problem was
caused by incorrect coordinate translation when handling mouse events
with an active inline assistant.
The fix adjusts mouse event coordinates by properly accounting for the
terminal view's `scroll_top` value when the inline assistant is present,
ensuring that text selection precisely follows the mouse cursor
position.
Closes#26111
Release Notes:
- Fixed text selection misalignment in terminal when the inline
assistant is active
Co-authored-by: Peter Tripp <peter@zed.dev>
Require a newer Node version to make Copilot work
Closes#27908
Release Notes:
- Breaking Change: If using system node Zed now requires Node >= v20.
Previously Node >= v18 was required. (Node v18 EOL date is 2025-04-30;
Node v19 EOL since 2023-06-01). Note: This does not change the Zed
bundled Node runtime version (still v23).
This PR removes the retained `MarkdownStyle` on the `Markdown` entity in
favor of using the `MarkdownElement` directly and passing the
`MarkdownStyle` to it.
This makes it so switching themes will be reflected live in the code
block styles.
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Agus Zubiaga <hi@aguz.me>
I wanted this for CONL (https://conl.dev )'s nascent langauge server,
and it seems like most of the support was already wired up on the LSP
side, so this surfaces it into the editor.
Release Notes:
- Added support for the `insert_text_mode` field of completions from the
language server protocol.
With #27295, the cursor would center upon running
`SelectLargerSyntaxNode`. This was done to provide more context when
making large selections, but when making small selections (such as a
single parameter in an argument list) it was confusing that the scroll
position jumped.
This change makes that behavior slightly more conservative: now when the
selection is small enough to fit on the screen scrolling will only occur
to keep the cursor position on the screen (including respecting
`vertical_scroll_margin`).
Release Notes:
- N/A
Co-authored-by: João Marcos <marcospb19@hotmail.com>
- Show yellow warning (instead or error) for leading/trailing
whitespace.
- Do not block user from creating it.
- If you rename existing file/dir which contains leading/trailing
whitespace, it will show error right away.
<img width="250" alt="image"
src="https://github.com/user-attachments/assets/562895ee-3a86-4ecd-bb38-703d1d8b8599"
/>
Release Notes:
- Added warning for leading or trailing whitespace while renaming or
creating new file or directory in Project Panel.
I found a few more cases where the UI wasn't updated immediately after
an interaction.
Release Notes:
- agent: Fixed delay after removing threads from "Past Interactions"
- agent: Fixed delay after adding/remove context via keyboard
Currently, it's pretty common that when the agent gets stuck, it deletes
whatever it's stuck on and replaces it with a TODO comment, then
cheerfully reports that it has "simpified" the implementation. This is
worse than leaving the broken code, because at least a human could take
over and try to get it across the finish line.
This system prompt adjustment attempts to make the agent do something
more useful when in this situation: report that it's stuck, explain why
it's stuck, and ask the user what to do.
Release Notes:
- N/A
<img width="622" alt="Screenshot 2025-04-05 at 5 48 14 PM"
src="https://github.com/user-attachments/assets/24b9c7d4-d3e2-4929-bca8-79db5b4e5748"
/>
Release Notes:
- The `read_files` tool now reads only the symbol outline files above a
certain size, to conserve context window space. Then it suggests that
the agent call `read_files` again with the relevant line ranges it saw
in the outline.
This PR reverts #27897, as it is causing a number of Helix-related tests
to fail:
```
Summary [ 84.324s] 1796 tests run: 1793 passed, 3 failed, 0 skipped
FAIL [ 0.434s] vim helix::test::test_delete
FAIL [ 0.562s] vim helix::test::test_delete_character_end_of_buffer
FAIL [ 0.537s] vim helix::test::test_delete_character_end_of_line
```
This reverts commit 9949512b64.
Release Notes:
- Community: Reverted https://github.com/zed-industries/zed/pull/27897.
This adds a `next_mode` parameter to the `vim::Paste` action. My main
use-case for this is for helix users, who will want to switch into
`HelixNormal` mode instead of `Normal` mode.
I'm not sure if this is the best approach -- another possibility would
be to have a global vim-vs-helix configuration, and then have every
invocation of "normal" mode choose vim or helix based on that global
configuration. But the approach in this PR is much less invasive.
Release Notes:
- vim: switch to the configured default mode after paste instead of
hard-coding Normal mode
This bumps `wasi-sdk` to version 25 and adds target architecture
conditionals.
Closes#18492
Release Notes:
- Fixed compiling dev extensions with Tree-sitter grammars on Linux
aarch64.
This PR fixes the `assistant: open prompt library` action in the command
palette not opening the prompt library when the Assistant Panel did not
have focus.
Fixes https://github.com/zed-industries/zed/issues/28058.
Release Notes:
- assistant: Fixed `assistant: open prompt library` not opening the
prompt library when the Assistant Panel was not focused.
This PR fixes an issue where opening the configuration view from the
model selector in the Agent (or inline assist) was not working properly.
Fixes https://github.com/zed-industries/zed/issues/28078.
Release Notes:
- Agent Beta: Fixed an issue where selecting "Configure" in the model
selector would not bring up the configuration view.
Closes#27223
Merges: #27996, #26734, #27949
Release Notes:
- AWS Bedrock: Added advanced authentication strategies with:
- Short lived credentials with Session Tokens
- AWS Named Profile
- EC2 Identity, Pod Identity, Web Identity
- AWS Bedrock: Added Claude 3.7 Thinking support.
- AWS Bedrock: Adding Cross Region Inference for all combinations of
regions and model availability.
- Agent Beta: Added support for AWS Bedrock.
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
A user reported this issue [on
Discord](https://discord.com/channels/869392257814519848/873292398204170290/1357879959422636185).
The issue here only arises for users which recently installed Zed or had
previously not dismissed the Git Onboarding component. It was introduced
by https://github.com/zed-industries/zed/pull/27412, which made the
banner component reusable.
For every banner, there is a value stored in the KVP store when it was
first dismissed. For the git onboarding banner, this was
`zed_git_banner_dismissed_at` initially, but this key would have been
changed by the linked PR. A change would have resulted in the banner
being shown again for users who already dismissed the panel, so for the
special case of `Git Onboarding`, a check was added which ensured this
would not happen.
However, this check was only added for reading from the key from the DB
but not on writing the git onboarding dismissal it to the DB. Thus, if a
user who had not previously dismissed the panel opened Zed, we would
check for the old key to be present in the DB. Since that would not be
the case, the banner would be shown. If the user dismissed the panel, it
would be stored in the database with the new key. Thus, on a reopen of
Zed, the banner would again be shown since for the old key there would
still be no value present and users are unable to dismiss the panel.
This PR fixes this behavior by moving the check into the method that
generates the key. With this, users which were unaffected by the bug
will still not see the panel again. Users who would install Zed with
this change present will be able to properly dismiss the panel aswell.
Users which were affected by the bug need to dismiss the banner one more
time. That happens because I did not want to modify the dismissal check
to check for two keys (the original one and the new one), as it would
clutter the logic even more for this special case. If this would be
preferred, feel free to let me know.
Release Notes:
- Fixed an issue where dismissing the git onboarding banner would not be
persisted across sessions.
This would cause the history view not to get refreshed immediately when
a thread was deleted
Release Notes:
- agent: Fixed a bug where the history view wouldn't refresh after
deleting a thread
#28102 introduced a bug where thread summaries wouldn't get generated
because they would get set to the default title instead of `None`.
Not adding a release note because the bug didn't make it to Preview.
Release Notes:
- N/A
Add the following actions for use while calling: `Mute`, `Deafen`,
`ShareProject`, `ScreenShare`, `LeaveCall`
We were also interested in adding push-to-talk functionality for mute,
but that will go in a followup PR
Release Notes:
- Call actions (mute/screenshare/etc.) can now be bound to keys and run from the command palette.
---------
Co-authored-by: Ben Kunkle <ben.kunkle@gmail.com>
Co-authored-by: Ben Kunkle <ben@zed.dev>
A "Near" block acts similarly to a "Below" block, but can (if it's
height is <= one line height) be shown on the end of the preceding line
instead of adding an entire blank line to the editor.
You can test it out by pasting this into `go_to_diagnostic_impl` and
then press `F8`
```
let buffer = self.buffer.read(cx).snapshot(cx);
let selection = self.selections.newest_anchor();
self.display_map.update(cx, |display_map, cx| {
display_map.insert_blocks(
[BlockProperties {
placement: BlockPlacement::Near(selection.start),
height: Some(1),
style: BlockStyle::Flex,
render: Arc::new(|_| {
div()
.w(px(100.))
.h(px(16.))
.bg(gpui::hsla(0., 0., 1., 0.5))
.into_any_element()
}),
priority: 0,
}],
cx,
)
});
return;
```
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
This PR renames the `AssistantEvent` type to `AssistantEventData`, as it
no longer represents the event itself, just the data needed to construct
it.
Pulling out of https://github.com/zed-industries/zed/pull/25179.
Release Notes:
- N/A
The one big protobuf file was getting a bit difficult to navigate. I
split it into separate topic-specific files that import each other.
Release Notes:
- N/A
PR #24388 changed the markdown parsing to copy parsed text in order to
handle markdown escaping, removing the optimization to instead reuse
text from the input.
Another issue with that change was that handling of finding links within
`Text` intermixed use of `text` and `parsed`, relying on the offsets
matching up (which I believe was true in practice).
The solution is to distinguish pulldown_cmark `Text` nodes that share
bytes with the input and those that do not.
Release Notes:
- N/A
This PR fixes a panic that could occur when opening the Agent diff from
the workspace (with the agent panel closed).
Release Notes:
- agent: Fixed a panic when running the `agent: open agent diff` command
with the Agent Panel closed.
This PR removes replaces the `.unwrap`s when accessing the debug panel
with `if let Some`s.
These `.unwrap`s are not locally verifiable, and thus are not safe.
Release Notes:
- N/A
Seems to be very similar to
https://github.com/zed-industries/zed/pull/28059
Edit: Updated the reproduction-steps as I missed something.
The method without a check currently causes my debug-builds to crash on
the regular if I:
- Run a debug build and open it fullscreen in a dedicated space on my
Mac.
- Work on any of the built-in languages (e.g. remove some content from
any `highlights.scm`)
- Reopen the workspace with the debug-build.
- Crash.
~~We might actually be able to revert the changes made in
https://github.com/zed-industries/zed/pull/21510 and just add the
null-check. Then again, I am not at all sure whether that would work.~~
See comment below.
Release Notes:
- N/A
Release Notes:
- agent: Tool call's input and output content are now rendered with
Markdown, which allows them to be selected and copied.
---------
Co-authored-by: Agus Zubiaga <hi@aguz.me>
Release Notes:
- agent: The scrollbar now automatically hides if there's no mouse
movement on the thread list.
---------
Co-authored-by: Agus Zubiaga <agus@zed.dev>
Co-authored-by: Agus Zubiaga <hi@aguz.me>
This PR adds tool calling support for GitHub Copilot Chat models.
Currently only supports the Claude family of models.
Release Notes:
- agent: Added tool calling support for Claude models in GitHub Copilot
Chat.
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Before this change, the editor completion menu and gutter menus reversed their order so that the initial selection is near the user's focus. This change instead displays these menus in a consistent top-to-bottom order because the following benefits outweigh that benefit:
* Matches behavior of some other editors (Neovim and VSCode).
* Looks better for lexicographic lists.
* Keeps the meaning of keyboard interaction consistent, if the user is anticipating the order of the menu's contents.
Could consider making this configurable in the future if desired.
Closes#25066.
Release Notes:
- N/A
This PR updates the `user rate limit` and `user usage` log lines to
include some more information that will be useful for graphing in Axiom.
Release Notes:
- N/A
This brings in a bunch of helix bindings (many of them from
infogulch/zed-helix-keymap) and implements helix-style delete.
Release Notes:
- vim: Expanded default helix-style keybindings in HelixNormal mode
This PR updates the usage measures used for rate limiting when using
Claude 3.7 Sonnet.
Instead of using the combined `tokens_per_minute` measure we now rate
limit individually on `input_tokens_per_minute` (which exclude cache
reads) and `output_tokens_per_minute`.
Release Notes:
- N/A
This PR adds tracking for input and output tokens per minute separately
from the current aggregate tokens per minute.
We are not yet rate-limiting based on these measures.
Release Notes:
- N/A
Closes: https://github.com/zed-industries/zed/issues/20582
Allows users to select a specific model for each AI-powered feature:
- Agent panel
- Inline assistant
- Thread summarization
- Commit message generation
If unspecified for a given feature, it will use the `default_model`
setting.
Release Notes:
- Added support for configuring a specific model for each AI-powered
feature
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
This PR adds new granular tokens per minute columns to the `models`
table in preparation for more fine-grained rate limits.
The following columns have been added:
- `max_input_tokens_per_minute`
- `max_output_tokens_per_minute`
These mirror the "Maximum input tokens per minute (ITPM)" and "Maximum
output tokens per minute (OTPM)" [rate limits from
Anthropic](https://docs.anthropic.com/en/api/rate-limits#rate-limits).
Release Notes:
- N/A
Use the `NSOperatingSystemVersion` struct provided by the cocoa crate
instead of our own. Additionally we can directly use
`isOperatingSystemAtLeastVersion` instead of manually implementing
version comparison logic.
The `isOperatingSystemAtLeastVersion` instance method has been available
since MacOS 10.10, which released a decade ago.
Documentation for `isOperatingSystemAtLeastVersion `:
https://developer.apple.com/documentation/foundation/nsprocessinfo/1414876-isoperatingsystematleastversion
Release Notes:
- N/A
Changes default keymaps to more closely match the behavior of VSCode.
New Zed behavior:
`cmd-k w` / `ctrl-k w` -- Closes all buffers in the current pane
`cmd-k cmd-w` / `ctrl-k ctrl-w` -- Closes all buffers in all panes
VScode:
`cmd-k cmd-w` is workbench.action.closeAllEditors (close all buffers in
all splits)
`cmd-k w` is workbench.action.closeEditorsInGroup (close all buffers in
current split)
Both leave pinned tabs untouched.
Release Notes:
- Improved keybindings for close all tabs to better match VSCode
behavior
This is a follow up to https://github.com/zed-industries/zed/pull/14821,
which escaped `$` but not `^`.
This is fine for `bash`, but causes issues with `zsh`. This change
escapes the `^`. I tested this against `bash`, `zsh` and `fish`
I suspect such escaping would probably need to be done at some
shell-specific layer of the code, but for now it seems like the tasks
provided by the `ContextProvider` are supposed to be shell agnostic.
To reproduce the original issue:
1. Create a Go test file in a module that just contains a single test
`TestABC`.
2. Run `zsh -i -c "go test -run ^TestABC\$"` which is what Zed tries to
run when the task for a specific Go test is executed.
3. An error that there are no tests to run will be produced even though
there is a test.
4. Run `zsh -i -c "go test -run \^TestABC\$"` (note the backslash before
^).
5. The test will run successfully.
Example:
``` go
package bar
import "testing"
func TestABC(t *testing.T) {}
```
Release Notes:
- fix: Escape the ^ in the Go test -run regex to improve shell
compatibility (notably with zsh).
Release Notes:
- Fixed an issue causing "robot voice" when enabling the microphone on
some bluetooth headphones (hopefully).
Co-authored-by: Zed AI <ai+claude-3.7@zed.dev>
With the recent deprecation of `rustPlatform.fetchCargoTarball` +
migration to using `fetchCargoVendor` by default in `buildRustPackage`
(NixOS/nixpkgs#394012), the `cargo-bundle` override strategy used here,
as prescribed by the
[nixos asia wiki](https://nixos.asia/en/buildRustPackage) no longer
works:
c6e2d20a02/nix/build.nix (L100-L116)
[`fetchCargoTarball` produced a single derivation][tarball-drv] but
`fetchCargoVendor` [produces two][vendor-drvs]:
- `${name}-vendor-staging` (inner; FoD)
- `${name}-vendor` (outer)
[tarball-drv]:
36fd87baa9/pkgs/build-support/rust/fetch-cargo-tarball/default.nix (L79)
[vendor-drvs]:
10214747f5/pkgs/build-support/rust/fetch-cargo-vendor.nix (L52-L103)
`overrideAttrs` here is setting `outputHash` on the latter (which isn't
a fixed-output-derivation and does not have `outputHashMode` set which
implies `outputHashMode = "flat"`) instead of the inner; this results in
errors like this:
```console
❯ nix develop
error: output path '/nix/store/cb57w05zvsqxshqjl789kmsy9pbqjn06-cargo-bundle-0.6.1-zed-vendor.tar.gz' should be a non-executable regular file since recursive hashing is not enabled (outputHashMode=flat)
error: 1 dependencies of derivation '/nix/store/k3azmxljgjn26hqyhg9m1y3lhx32y939-cargo-bundle-0.6.1-zed.drv' failed to build
error: 1 dependencies of derivation '/nix/store/8ag4v0m90m4kcaq1ypp7f85pp8s6fxgc-nix-shell-env.drv' failed to build
```
> [!NOTE]
> you will need to remove
`/nix/store/cb57w05zvsqxshqjl789kmsy9pbqjn06-cargo-bundle-0.6.1-zed-vendor.tar.gz`
> from your nix store in order to be able to reproduce this
We want to be setting `outputHash` on the [first derivation][first-drv]
instead. This change has us just do the call to `fetchCargoTarball`
manually instead of using overrides.
[first-drv]:
10214747f5/pkgs/build-support/rust/fetch-cargo-vendor.nix (L85)
---
I suspect CI/other machines didn't catch this due to a store path
matching the name + `outputHash` already being present but I'm not
entirely sure how this happened...
`sha256-Q49FnXNHWhvbH1LtMUpXFcvGKu9VHwqOXXd+MjswO64=` is actually a
`fetchCargoTarball` hash, not a `fetchCargoVendor` hash (and upstream
`cargo-about`'s `cargoDeps` [has been using `cargoVendor`][ups] since
before the nixpkgs bump in 50ad71a630)
[ups]:
1d09c579c1/pkgs/by-name/ca/cargo-about/package.nix (L22)
---
> [!NOTE]
> eventually we'll be able to just have `.overrideAttrs (_: { cargoHash
= "..."; })` work as expected [^2]
---
Release Notes:
- N/A
[^2]:
[now that
`buildRustPackage`](https://github.com/NixOS/nixpkgs/pull/382550) uses
[`lib.extendMkDerivation`](bbdf8601bc/doc/build-helpers/fixed-point-arguments.chapter.md)
(NixOS/nixpkgs/#234651) the groundwork is in place; a follow PR [needs
to use `cargoHash` and friends from
`finalAttrs`](10214747f5/pkgs/build-support/rust/build-rust-package/default.nix (L104))
Previously, when comparing a block with an empty range to an empty query
range in non-inclusive mode, our binary search logic could end up
computing an inverted range, causing a panic.
This commit adds special casing when comparing empty blocks with empty
ranges.
cc @as-cii: I'm realizing that the approach to searching for the
intersecting replacement blocks makes some invalid assumptions about the
ordering of replace decorations. They aren't ordered at all by their end
range. @maxbrunsfeld and I are wondering if long term, we should remove
replace decorations and find another solution for folding buffers in
multi buffers.
Release Notes:
- Fixed an occasional panic that would occur when navigating to the next
change hunk with a pending inline transformation present.
Co-authored-by: Peter Tripp <petertripp@gmail.com>
This PR disables `parallel_tool_calls` for the models that support it,
as the Agent currently expects at most one tool use per turn.
It was a bit of trial and error to figure this out. OpenAI's API
annoyingly will return an error if passing `parallel_tool_calls` to a
model that doesn't support it.
Release Notes:
- N/A
This adds a nix CI job to build the flake in debug mode for
aarch64-darwin and x86-linux. For now this job will only run when the
`run-nix` label is added to a PR.
The CI job doesn't push to cachix for now, so every build is a clean
build.
I also added a condition to the garbage collection step so it only runs
when the nix store is >50GB.
Release Notes:
- N/A
This makes context essentially work the same way as `read-file`,
increasing the likelihood of cache hits.
Just like with `read-file`, we'll notify the model when the user makes
an edit to one of the tracked files. In the future, we want to send a
diff instead of just a list of files, but that's an orthogonal change.
Release Notes:
- agent: Improved caching of files in context
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Same as `editor::RestartLanguageServer`, now there's an
`editor::StopLanguageServer` action that stops all language servers,
related to the currently opened editor.
Opening another singleton editor with the same language or changing
selections in a multi buffer will bring the servers back up.
Release Notes:
- Added a way to temporarily stop LSP servers
---------
Co-authored-by: Michael Sloan <mgsloan@gmail.com>
This PR adds the token count to the active thread view. It doesn't
behaves quite like Assistant 1 where it updates as you type, though; it
updates after you submit the message.
<img
src="https://github.com/user-attachments/assets/82d2a180-554a-43ee-b776-3743359b609b"
width="700" />
---
Release Notes:
- agent: Add token count in the thread view
---------
Co-authored-by: Agus Zubiaga <hi@aguz.me>
Release Notes:
- Fixed a rendering bug that caused context in the agent to not wrap
properly.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Zed AI <ai+claude-3.7@zed.dev>
### Context
The Anthropic API fails if a request message contains a tool use and no
`Text` segments or it only contains empty `Text` segments. These are
cases that the model itself produces, but the API doesn't support
sending them back.
#27917 fixed this by appending "Using tool..." in the thread's message,
but this causes the actual conversation to include it, so it would
appear in the UI (we would actually display a gap because we never
rendered its markdown, but "Using tool..." would show up when the thread
was restored).
### Solution
We'll now only append this placeholder when we build the request, so the
API still sees it, but the UI/Thread doesn't.
Another issue we found is that the model starts mimicking these
placeholders in later tool uses which is undesirable. So unfortunately,
we had to add logic to filter them out.
Release Notes:
- agent: Improved rendering of tool uses without text
---------
Co-authored-by: Bennet <bennet@zed.dev>
Previously the "Thinking..." step would show up as pending, even though
the user cancelled the generation:
<img width="672" alt="image"
src="https://github.com/user-attachments/assets/c9cdce0a-d827-4e23-96f5-b150465911a7"
/>
Release Notes:
- Fixed an issue where the thinking step would show up as pending even
when the generation was cancelled
This happened because of two reasons:
- `Workspace::recent_navigation_history` didn't include the current file
- The context picker added the current file to a exclude list
The latter was actually intentional because we already show the file in
the suggested context, but now that we actually have mentions, it's just
inconvenient not to have it there.
Release Notes:
- N/A
This was accidentally getting added due to increased feature
unification. We've manually excluded reqwest to go back to the desired
behavior: remote_server, doesn't depend on openssl.
Release Notes:
- N/A
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
This PR adds the `Cargo.toml` for the `workspace-hack` crate to the
ignore list for Renovate, as it is opening a number of PRs against it
that will interfere with it.
Release Notes:
- N/A
This PR adds the ability to edit previous user messages in the thread.
Release Notes:
- Agent: Added the ability to edit previous user messages
(Preview-only).
Release Notes:
- Fixed a bug where Zed sometimes added multiple redundant FS watchers
when language servers requested to watch paths. This could cause saves
and git operations to fail if Zed exceeded the file descriptor limit.
---------
Co-authored-by: Piotr <piotr@zed.dev>
Closes#27769
When adding snippet we were not respecting autoclose setting, before
creating AutocloseRegion. This leads to cursor to skip over instead of
typing that character. This PR fixes it.
Release Notes:
- Fixed certain case where typing closing bracket would skip it when
auto close setting is turned off.
This adds a "workspace-hack" crate, see
[mozilla's](https://hg.mozilla.org/mozilla-central/file/3a265fdc9f33e5946f0ca0a04af73acd7e6d1a39/build/workspace-hack/Cargo.toml#l7)
for a concise explanation of why this is useful. For us in practice this
means that if I were to run all the tests (`cargo nextest r
--workspace`) and then `cargo r`, all the deps from the previous cargo
command will be reused. Before this PR it would rebuild many deps due to
resolving different sets of features for them. For me this frequently
caused long rebuilds when things "should" already be cached.
To avoid manually maintaining our workspace-hack crate, we will use
[cargo hakari](https://docs.rs/cargo-hakari) to update the build files
when there's a necessary change. I've added a step to CI that checks
whether the workspace-hack crate is up to date, and instructs you to
re-run `script/update-workspace-hack` when it fails.
Finally, to make sure that people can still depend on crates in our
workspace without pulling in all the workspace deps, we use a `[patch]`
section following [hakari's
instructions](https://docs.rs/cargo-hakari/0.9.36/cargo_hakari/patch_directive/index.html)
One possible followup task would be making guppy use our
`rust-toolchain.toml` instead of having to duplicate that list in its
config, I opened an issue for that upstream: guppy-rs/guppy#481.
TODO:
- [x] Fix the extension test failure
- [x] Ensure the dev dependencies aren't being unified by Hakari into
the main dependencies
- [x] Ensure that the remote-server binary continues to not depend on
LibSSL
Release Notes:
- N/A
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
This PR adds `completions.lsp_insert_mode` and effectively changes the
default from `"replace"` to `"replace_suffix"`, which automatically
detects whether to use the LSP `replace` range instead of `insert`
range.
`"replace_suffix"` was chosen as a default because it's more
conservative than `"replace_subsequence"`, considering that deleting
text is usually faster and less disruptive than having to rewrite a long
replaced word.
Fixes#27197Fixes#23395 (again)
Fixes#4816 (again)
Release Notes:
- Added new setting `completions.lsp_insert_mode` that changes what will
be replaced when an LSP completion is accepted. The default is
`"replace_suffix"`, but it accepts 4 values: `"insert"` for replacing
only the text before the cursor, `"replace"` for replacing the whole
text, `"replace_suffix"` that acts like `"replace"` when the text after
the cursor is a suffix of the completion, and `"replace_subsequence"`
that acts like `"replace"` when the text around your cursor is a
subsequence of the completion (similiar to a fuzzy match). Check [the
documentation](https://zed.dev/docs/configuring-zed#LSP-Insert-Mode) for
more information.
---------
Co-authored-by: João Marcos <marcospb19@hotmail.com>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This PR adds passing in `stop_on_entry` to debug configs in debug.json
instead of going through initialization args.
This has two benefits:
1. It's more streamlined to a user since every internal adapter supports
`stop_on_entry` for launch requests and Go's adapter supports it for
attach requests too.
2. It will allow @osiewicz `NewSesssionModal` PR to use this field for
the stop on entry checkbox.
Release Notes:
- N/A
This fixes a bug in #27568 that caused flickering in the git panel's
checkbox state when staging and unstaging entire files. The problem is
that that stage/unstage action first saves the target path (if it's open
as a buffer), and we do a targeted git status scan in response to that
filesystem event, which makes its way to the git panel and causes it to
clear its pending state before the actual stage or unstage has gone
through.
The fix is to not clear the panel's pending state for git repository
events that originated from a targeted scan (i.e. one that was triggered
by FS events for repo paths, as opposed to events inside `.git` which
cause all statuses to be recomputed).
Release Notes:
- N/A
This PR makes the command permission prompt part of the tool card and
allow users to straight away change the `always_allow_tool_actions`
setting via the "Always Allow" button from that card. If that button is
clicked, that setting is turned on, and any command that requires
permission from that point on will auto-run.
Additionally, if a bash command spans multiple lines, we show the line
count at the end of the command string. (Note: this is not perfect yet
because it can likely be not visible by default, but we didn't think
this was a major blocker for now. We'll work on improving this next).
### Thread View
<img
src="https://github.com/user-attachments/assets/00f93c39-990f-4b79-84ec-0427b997167f"
width="500"/>
### Settings View
<img
src="https://github.com/user-attachments/assets/52d32435-7c8d-4ab4-a319-6cabc007267b"
width="500"/>
Release Notes:
- N/A
---------
Co-authored-by: Thomas Mickley-Doyle <tmickleydoyle@gmail.com>
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
This PR removes the `use_any_tool` method from the `LanguageModel`
trait.
It was not being used anywhere, and doesn't really fit in our new tool
use story.
Release Notes:
- N/A
We were including the context at the end which meant it never got
cached. We'll now include it with the first message that introduced it
so it's cached as long as it doesn't change.
This is an improvement, but we probably still need to think of ways to
optimize caching for cases where files in context change.
Release Notes:
- N/A
It's super easy to undo those changes. In a future PR, we should also
avoid requiring confirmation in the batch tool if all the underlying
tools don't require confirmation.
Release Notes:
- N/A
This PR removes an unneeded `else if` branch that was the same as the
previous branch in the conditional.
Doesn't seem necessary to run this twice.
Release Notes:
- N/A
This PR makes it so if we receive a tool use from the model without any
corresponding text, we'll insert some placeholder text to keep the
conversation in a well-structured format.
This aims to fix an error that Antonio was seeing:
Release Notes:
- N/A
This PR updates the tool names in the default profiles, as they were not
updated after the tool names were changed to snake_case in #27903.
Release Notes:
- N/A
This seems to improve the performance of `gemini-2.5-pro-exp-03-25`
significantly.
We know define a single `Tool` that has multiple `FunctionDeclaration`s,
instead of defining multiple `Tool`s with a single
`FunctionDeclaration`.
Oddly enough the `flash` models seemed to work perfectly fine with the
multiple `Tool { ... }` definitions
Release Notes:
- N/A
- bump our livekit version to include a fix for a crane bug (TODO: add
link when an issue is filed on crane)
- switch to a clang stdenv for both linux and macos
- manually unify versions of our notify crate
- remove old linker flags which were only needed for livekit
- fix an issue where RUSTFLAGS shadowed the rustflags from cargo configs
Release Notes:
- N/A
We'll now prompt the user to start a new thread when the active one gets
too long.
<img width=500
src="https://github.com/user-attachments/assets/91445bc0-3e81-422f-aa4a-b8f0741f9d9a"></img>
When they click "Start New Thread", will create a new one with the
previous one added as context.
<img width=500
src="https://github.com/user-attachments/assets/c3b4223f-5bdd-4ba4-956f-5a5880d5e2c3"></img>
Instead of including the full thread text, we'll now add summarized
versions of threads to the context, allowing you to continue the
conversation even if it was near the token limit.
- Thread summaries are cached and persisted.
- A cached summary is invalidated if the thread is continued.
- We start generating the thread summary as soon as it's selected from
the picker. Most times, the summary will be ready by the time the user
sends the message.
- If the summary isn't ready by the time a message is sent, the user
message will be displayed in the thread immediately, and a "Summarizing
context..." indicator will appear. After the summaries are ready, we'll
start generating the response and show the usual "Generating..."
indicator.
Release Notes:
- N/A
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Closes#20391
### Summary
This adds a persistence layer to the command palette so that usages can
persist after Zed is closed and re-opened.
The current "usage" algorithm is unchanged, e.g.:
- Sorts by number of usages descending (no recency preference)
- Once a user's query is active, removes these suggestions in favor of
fuzzy matching
There are some additional considerations in order to keep the DB from
growing uncontrollably (and to make long-term use ergonomic):
- The "invocations" count handles max values (though at u16, it seems
unlikely a user will deal with this)
- If a command is un-invoked for more than a month, it stops being
considered a recent usage, and its next update will update its usages
back to 1
### Future Considerations
- Could make the "command expiry" configurable in settings, so the user
can decide how long to hold onto recent usages
- Could make a more sophisticated algorithm which balances recency and
total invocations - e.g. if I've used COMMAND_A 100 times in the last
month, but COMMAND_B 10 times today, should COMMAND_B actually be
preferred?
- Could do preferential fuzzy-matching against these matches once the
user starts a query.
Release Notes:
- Added persistent history of command palette usages.
---------
Co-authored-by: Peter Finn <mastion11@gmail.com>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This PR completes the process of moving git repository state storage and
scanning logic from the worktree crate to `project::git_store`.
Release Notes:
- N/A
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Conrad <conrad@zed.dev>
This PR renames the `assistant2` actions to `agent`.
Note that any `assistant` actions have been left as-is for now so that
there aren't any changes to users not in the feature flag.
Release Notes:
- N/A
This PR adds some affordances for when the currently-selected model does
not support tools.
We disable the profile selector and put it into a "No Tools" state:
<img width="1394" alt="Screenshot 2025-04-01 at 3 58 00 PM"
src="https://github.com/user-attachments/assets/de6ecb0f-7657-4e16-9d5d-7bbfbc2b0a5c"
/>
We will also only attach tools to the request to the model if the model
supports it.
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/27619
Fixes issue with right wrapped movement when a multi-byte character is
at the end of the line. This is done by grabbing the last character on
the current row and using that characters size to calculate the
`max_column` variable, which is used to decide if the next right
movement should move down the line or not.
We did notice a bit of code that could be an issue that we wanted to
call out.
[Here](https://github.com/zed-industries/zed/blob/main/crates/editor/src/display_map.rs#L1070)
inside of `clip_at_line_end` it also does a saturating_sub(1), assuming
a single byte character. We didn't run into any issues due to this line
but felt like a similar bug. We can apply a similar fix if wanted to
pose the question first.
Test case: Moving to next line when eol is a multi-byte character
https://github.com/user-attachments/assets/1021ab1f-f49d-4986-8f9a-8cfc7e5c91bc
Release Notes:
- Fixed issue in vim forward spacing when a multi-byte character is at
the eol
---------
Co-authored-by: KyleBarton <kjbarton4@gmail.com>
Python envs created with virtualenvwrapper have the ability to link to
the project directory (via the `.project` file in the virtualenv).
`python-environment-tools` supports this and reports the project path.
Additionally, some tools (e.g virtualfish) recognize special
"environment activation" files in project directories (`.venv` by
default)
[1].
Use the above information to sort reported Python toolchains so that the
correct env for a given worktree is at the top.
[1]
https://virtualfish.readthedocs.io/en/latest/plugins.html#auto-activation-auto-activation
Release Notes:
- python: Improved detection of virtualenvwrapper environments in work
trees
This PR updates the Agent Panel tooltip in the status to use "Agent
Panel" instead of "Assistant Panel".
Also changes the name we use in workspace serialization.
Release Notes:
- N/A
This PR makes it so we include the `default_profile` and `profiles`
settings in the JSON schema.
This provides completions when editing the `settings.json`.
Release Notes:
- N/A
This unblocks work on new debugger UI, where we don't want the
set_active function to be called unconditionally.
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
This PR adds a new `enable_all_context_servers` field to agent profiles
to allow them to enable all context servers without having to opt into
them individually.
The "Write" profile will now have all context servers enabled out of the
box.
Release Notes:
- N/A
Eager and Subtle modes are only supported for Zed as an edit prediction
provider and they were visible if your provider is Copilot, which is
misleading.
Release Notes:
- N/A
Closes#26902
- We used to serialize SSH remote only when opened via recent entries,
and not on first time. This broke restore, when opening same folder for
second time from recent entries. Once opened for second time, restoring
used to. work correctly. This PR fixes this by serializing when opened
for first time.
- We didn't handle window replace post worktree creation in first time
flow, this resulted in project panel not opening automatically like it
does with recent entries, or local projects. This PR fixes it by
following same flow as recent entries.
Release Notes:
- Fixed SSH remote not restoring when opening for second time.
- Fixed project panel not opening when opening new SSH remote folder.
This PR fixes two bugs that cause unexpected behavior with breakpoints.
The first bug made it impossible to delete the last breakpoint in a file
in the workspace's database. This caused deleted breakpoints to remain
in the database and added to new projects.
The second bug was an edge case in the breakpoint context menu where
disabling/enabling a breakpoint would sometimes set a new breakpoint on
top of the old breakpoint.
Release Notes:
- N/A
Motivation for this is to simplify the context types and make it cleaner
to add image context.
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Closes#27728
This stops code actions tooltip from being added when there's a visible
Editor::context_menu
Release Notes:
- Fix code actions tooltip opening on top of code actions menu
This PR adds functionality for loading the diff for an arbitrary git
commit, and displaying it in a tab. To retrieve the diff for the commit,
I'm using a single `git cat-file --batch` invocation to efficiently load
both the old and new versions of each file that was changed in the
commit.
Todo
* Features
* [x] Open the commit view when clicking the most recent commit message
in the commit panel
* [x] Open the commit view when clicking a SHA in a git blame column
* [x] Open the commit view when clicking a SHA in a commit tooltip
* [x] Make it work over RPC
* [x] Allow buffer search in commit view
* [x] Command palette action to open the commit for the current blame
line
* Styling
* [x] Add a header that shows the author, timestamp, and the full commit
message
* [x] Remove stage/unstage buttons in commit view
* [x] Truncate the commit message in the tab
* Bugs
* [x] Dedup commit tabs within a pane
* [x] Add a tooltip to the tab
Release Notes:
- Added the ability to show past commits in Zed. You can view the most
recent commit by clicking its message in the commit panel. And when
viewing a git blame, you can show any commit by clicking its sha.
Reverts the error behavior introduced in #27558. Upper-case keys in
keybindings no longer generate errors, instead they are transformed into
`shift-{KEY}`
e.g. `ctrl-N` becomes `ctrl-shift-n`
The behavior introduced in #27558 where "special" keys such as function
keys, `control`, `shift`, etc. Are parsed case-insensitively is
preserved.
Release Notes:
- Improved how upper-case characters are handled in keybinds. "special"
keys such as the function keys, `control`, `shift`, etc. are now parsed
case-insensitively, so for example `F8`, `CTRL`, `SHIFT` are now
acceptable alternatives to `f8`, `ctrl`, and `shift` when declaring
keybindings. Additionally, upper-case (ascii) characters will now be
converted explicitly to `shift` + the lowercase version of the
character, to match the Vim behavior.
NOTE: Release notes above should replace the release notes from #27558
Now that #27126 has landed, we can drop this from the nix shell which
has the side benefit that nix users don't actually need xcode installed
to develop zed anymore.
Release Notes:
- N/A
We updated our cargo-bundle fork, and this adds to our override to make
sure we have the latest version.
cargo-about also released a new version upstream which was picked up in
nixpkgs, so I've `nix flake update`'d and changed that version as well.
Thanks to @niklaskorz for [pinging
me](https://github.com/NixOS/nixpkgs/pull/392319#issuecomment-2746122094)
about this. You should be able to drop the patch next time you update.
Release Notes:
- N/A
This PR disables the "Suggest Edits" feature when in the `assistant2`
feature flag.
This functionality has been superseded by the new Agent Panel.
We can remove the feature outright once the Agent Panel is generally
available.
Release Notes:
- N/A
To make it easier to design UIs for some of these scenarios. This PR
adds specifically two variables:
- `ZED_SIMULATE_NO_THREAD_HISTORY`
- `ZED_SIMULATE_NO_LLM_PROVIDER`
Release Notes:
- N/A
---------
Co-authored-by: Agus Zubiaga <hi@aguz.me>
Before this change we didn't explicitly handle vim's exclusive-linewise
edgecase
(https://neovim.io/doc/user/motion.html#exclusive).
Instead we had hard-coded workarounds in a few places to make our tests
pass.
The most pernicious of these workarounds was that we represented a
visual line
selection as including the trailing newline (or leading newline for
files that
end with no newline), which other code had to undo to get back to what
the user
indended.
Closes#21440
Updates #6900
Release Notes:
- vim: Fixed `d]}` to not delete the closing brace
- vim: Fixed `d}` from the start of the line to not delete the paragraph
separator
- vim: Fixed `d}` from the middle of the line to not delete the final
newline
Models seem to do this ever so often and get very confused. Failing here
helps them recover.
Release Notes:
- N/A
Co-authored-by: Richard Feldman <richard@zed.dev>
Adds some guidance for the assistant on how to respond to tool results
and other interactions
Release Notes:
- N/A
Co-authored-by: Richard Feldman <richard@zed.dev>
Edit action markers look like git conflicts and can trip up tooling used
to resolve git conflicts. This PR creates them programmatically so that
they don't appear in source code.
Release Notes:
- N/A
Lets you get all the code symbols in the project (like the Code Symbols
panel) or in a particular file (like the Outline panel), optionally
paginated and filtering results by regex. The tool gives the files,
lines, and numbers of all of these, which means they can be used in
conjunction with the read file tool to read subsets of large files
without having to open the entire large file and poke around in it.
<img width="621" alt="Screenshot 2025-03-29 at 12 00 21 PM"
src="https://github.com/user-attachments/assets/d78259d7-2746-44c0-ac18-2e21f2505c0a"
/>
Release Notes:
- N/A
This PR includes design tweaks to elements involved on the "edit files"
flow: the bar that appears above the message editor, buttons on the
multibuffer hunks, adding keybindings to the "Review Changes" button,
etc.
<img
src="https://github.com/user-attachments/assets/4bff883a-c5c4-443e-8bf5-d98f535c83ce"
width="750" />
Release Notes:
- N/A
By default, agent notifications now display only on your primary screen.
You can optionally configure them to display on all screens (or not to
display at all).
Release Notes:
- N/A
Display of git statuses in the git panel, project panel, and tabs
regressed in #27391, causing us to frequently see stale statuses. This
turns out to be because we were not emitting the
`WorktreeUpdatedGitRepositories` event in cases where we should be,
which in turn is because of bumping the `LocalRepositoryEntry`'s
`status_scan_id` too early, so that a later comparison of two
`status_scan_id` values wasn't detecting a change that we're expecting
it to detect.
Release Notes:
- N/A (problematic behavior didn't make it into stable or preview)
This enables hiding mouse cursor even on cursor movements like up, down,
etc. or selections made using keyboard, etc.
Renamed existing boolean setting "hide_mouse_while_typing" to
"hide_mouse". It can have three values: `on_typing_and_movement`,
`on_typing`, `never`.
Release Notes:
- Now mouse cursor hides even when you navigate, or make selections
using keyboard in editor. This behavior can be changed by setting
`hide_mouse` to `on_typing_and_movement`, `on_typing` or `never`.
## Summary
This PR starts the process of adding debug task locators to Zed's
debugger system. A task locator is a secondary resolution phase that
allows a debug task to run a command before starting a debug session and
then uses the output of the run command to configure itself.
Locators are most applicable when debugging a compiled language but will
be helpful for any language as well.
## Architecture
At a high level, this works by adding a debug task queue to `Workspace`.
Which add's a debug configuration associated with a `TaskId` whenever a
resolved task with a debug config is added to `TaskInventory`'s queue.
Then, when the `SpawnInTerminal` task finishes running, it emits its
task_id and the result of the ran task.
When a ran task exits successfully, `Workspace` tells `Project` to start
a debug session using its stored debug config, then `DapStore` queries
the `LocatorStore` to configure the debug configuration if it has a
valid locator argument.
Release Notes:
- N/A
This reverts commit be657aefa3. (#27572)
Unfortunately this change broke other bindings in the terminal like
`cmd-left`
and `cmd-right`.
We do need to redo the terminal IME handling at some point, but we'll
need a
bit more thought to find an approach that works.
Release Notes:
- N/A
This is a slight refactor that flattens Breakpoint struct in
anticipation of condition/hit breakpoints. It also adds a slight delay
before breakpoints are shown on gutter hover to make breakpoints less
attention grabbing.
Release Notes:
- N/A
This PR makes the plus icon button not a dropdown anymore, freeing it up
to be always the new thread action. In consequence, I'm moving all of
the other items into another dropdown, which now houses "new prompt
editor", history, and settings, all of which there are keybindings for.
<img
src="https://github.com/user-attachments/assets/1d0d43da-9447-4218-8b9b-e692c0b74f61"
width="700"/>
Release Notes:
- N/A
This PR switches us back to the upstream `cargo_metadata`.
We had switched to a fork in #27126, but this shouldn't be necessary
after #27117.
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/11626
Part of https://github.com/zed-industries/zed/issues/12853
`"restore_on_file_reopen": true` in workspace settings can now be used
to enable and disable editor data between file reopens in the same pane:
https://github.com/user-attachments/assets/8d938ee1-d854-42a8-bbc3-2a4e4d7d5933
The settings are generic and panes' data store can be extended for
further entities, beyond editors.
---------------
Impl details:
Currently, the project entry IDs seem to be stable across file reopens,
unlike BufferIds, so those were used.
Originally, the DB data was considered over in-memory one as editors
serialize their state anyway, but managing and exposing PaneIds out of
the DB is quite tedious and joining the DB data otherwise is not
possible.
Release Notes:
- Started to restore editor state on reopen
While building my own application using GPUI, I found that the `key_up`
event doesn't fire on Windows or macOS, with each platform failing for
different reasons. These events aren't used anywhere in Zed yet, so it
makes sense that the issue hasn't already been caught.
I don't have a Linux machine set up right now, so I don't know if these
events fire correctly on Linux or not.
---
Without this fix, a simple layout like the following:
```rust
div()
.on_key_down(cx.listener(|_, event, _, _| println!("Key down: {:?}", event)))
.on_key_up(cx.listener(|_, event, _, _| println!("Key up: {:?}", event)));
```
...would result in the following logs if the 'a' key was pressed:
```text
Key down: KeyDownEvent { keystroke: Keystroke { modifiers: Modifiers { control: false, alt: false, shift: false, platform: false, function: false }, key: "a", key_char: Some("a") }, is_held: false }
<eof>
```
With this fix, the `key_up` event fires correctly, resulting in the
following logs:
```text
Key down: KeyDownEvent { keystroke: Keystroke { modifiers: Modifiers { control: false, alt: false, shift: false, platform: false, function: false }, key: "a", key_char: Some("a") }, is_held: false }
Key up: KeyUpEvent { keystroke: Keystroke { modifiers: Modifiers { control: false, alt: false, shift: false, platform: false, function: false }, key: "a", key_char: None } }
<eof>
```
---
I've made the assumption that the `key_char` field shouldn't be set on
the `key_up` event since, unlike the `key_down` event, it's not an event
that may produce a character.
Happy to make any changes to this PR as required. If it would be
preferable to test this on Linux as well before it's merged, let me know
and I'll sort something out.
Hopefully this makes the experience of building new applications on GPUI
smoother, and potentially saves the Zed team some time if this event is
ever used in the future.
Release Notes:
- N/A
Implement the From trait for some simple conversations between Clipboard
related structs.
This PR only adds the From trait implementations and doesn't touch any
code. In a future PR we can simplify usage throughout the codebase, such
as:
```rust
// impl ClipboardString
fn new(text: String) -> Self {
Self::from(text)
}
```
Release Notes:
- N/A *or* Added/Fixed/Improved ...
When a file is deleted outside of Zed, but it doesn't have any unsaved
changes, it shouldn't be considered "dirty" (prompting you before you
close it).
Release Notes:
- Fixed an bug where unchanged buffers were marked as conflicting if
their files were deleted outside of Zed.
---------
Co-authored-by: Antonio <antonio@zed.dev>
Closes#27385
Builds on #27604 so that `vim::OtherEnd` works in visual block mode.
This is accomplished by reversing the order of active selections in the
buffer when the user hit `o`, so that the cursor moves diagonally across
the selection. The current behavior is preserved for `shift-o`, which is
how the cursors behave in vim.
We'll close#27604 since this encapsulates that change, but if you'd
prefer to take only the visual block motion component, we'll keep the
branch for #27604 open.
Test case: growing a box down and to the right, other ending, followed
by growing and shrinking the box:
https://github.com/user-attachments/assets/1df544e1-efce-4354-b354-bbfec007a7df
Test case: growing a box up and to the left, other ending, followed by
growing and shrinking the box:
https://github.com/user-attachments/assets/2f6d7729-c63a-4486-960b-23474c2e507a
Release Notes:
- Improved visual block mode when cursor is at beginning of selection
- Improved visual block mode so that `o` and `shift-o` reach parity with
vim
---------
Co-authored-by: KyleBarton <kjbarton4@gmail.com>
Fixes running git push on a coder instance.
Closes #ISSUE
Release Notes:
- Zed will now use `GIT_ASKPASS` if you already have one set instead of
overriding with our own. Fixes `git push` in Coder.
This PR switches collab over to start minting access tokens using the
new OAEP-based encryption format.
This is a follow-up to #15058 where we added support for this new
encryption format.
Clients that are newer than 8 months ago should be able to decrypt the
new access tokens. It is only clients older than 8 months ago that will
no longer be supported.
Release Notes:
- N/A
This fixes trashing files from the git panel on SSH remotes that don't
run a Desktop environment.
Release Notes:
- Fix trash to work on remotes with no desktop environment configured
This PR does three things
- Right clicking within the gutter outside of the gutter fold area
bounds opens a breakpoint context menu
- Disabled breakpoints are now outline with the debugger accent color
instead of being fully colored at half opacity
- Clicking a breakpoint acts differently now
- Clicking a breakpoint while holding the platform modifier key will
disable/enable it
- Clicking a breakpoint hint while holding the platform modifier key
will set a disabled breakpoint
- Clicking a disabled breakpoint will enable it instead of deleting it
Release Notes:
- N/A
This PR removes an unneeded anonymous lifetime from the `cx` parameter
to `Render::render`.
This makes it so the anonymous lifetime doesn't show up when
implementing the `Render` trait via a code action:
#### Before
```rs
struct Foo;
impl Render for Foo {
fn render(&mut self, window: &mut Window, cx: &mut Context<'_, Self>) -> impl IntoElement {
todo!()
}
}
```
#### After
```rs
struct Foo;
impl Render for Foo {
fn render(&mut self, window: &mut Window, cx: &mut Context<Self>) -> impl IntoElement {
todo!()
}
}
```
Release Notes:
- N/A
Swift bindings BEGONE
Release Notes:
- Switched from using the Swift LiveKit bindings, to the Rust bindings,
fixing https://github.com/zed-industries/zed/issues/9396, a crash when
leaving a collaboration session, and making Zed easier to build.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Michael Sloan <michael@zed.dev>
This caused undesirable and unnecessary scrolling, in that if you scroll
up, then as new messages stream into the panel, they jump the scroll bar
back down.
@agu-z and I paired on this and we think this is unnecessary now that we
don't see the Edit button in the UI, but @bennetbo we still see code for
the button in there, so...maybe we do still want this? (If so, we can
revert the second commit and go back to a more conditional way of
scrolling. 😄)
Release Notes:
- N/A
---------
Co-authored-by: Agus <agus@zed.dev>
This is a fix for this error when trying to run `auto_height_editor`
story:
```sh
thread 'main' panicked at C:\Users\x\dev\zed\crates\settings\src\settings_store.rs:363:32:
unregistered setting type workspace::workspace_settings::WorkspaceSettings
```
Release Notes:
- N/A
This PR adds two more cases to existing LSP completion cases.
- When text_edit exists: (New test)
1. we use text_edit, over insert_text and label
- When edit range exists (and text_edit is None): (New test)
1. insert_text is used over label if exists
2. label is used otherwise
- When not edit range exists (and text_edit is None): (Existing test)
1. insert_text is used over label if exists
2. label is used otherwise
Release Notes:
- N/A
Closes#18153
When calling `uninstall_extension`, the `work_dir` associated with this
`extension` doesn't have its corresponding `FileHandle` properly closed,
preventing the deletion of the `work_dir`. As seen in the image below,
after installing the `toml` extension, `zed.exe` holds two `Handle`s for
the folder `C:\Users\36477\AppData\Local\Zed\extensions\work\toml`.
Therefore, after deleting `extension_dir` and then calling
`this.update(...)`, `zed.exe` releases these two `Handles`, and only
then can the folder
`C:\Users\36477\AppData\Local\Zed\extensions\work\toml` be deleted. See
the corresponding file handles are closed after calling
`this.update(...)`:
However, if there is a running server of the extension, the error will
persist. At this point, I haven’t found a direct way to terminate all
running servers of the extension. Since this feature might affect the
`LspStore` structure, I paused my work here.
See when `toml` extension is running, we can not delete
`C:\Users\36477\AppData\Local\Zed\extensions\work\toml` since
`C:\Users\36477\AppData\Local\Zed\extensions\work\toml\taplo.exe` is
still running:
cc @ConradIrwin You're the expert in this area—what are your thoughts?
Release Notes:
- N/A
This PR removes the `ZedAssistant2` icon.
I went to use it as a placeholder icon, but noticed that the icon wasn't
loaded properly due to a name mismatch.
However, since we aren't using it anywhere I'm opting to remove it.
Release Notes:
- N/A
This PR fixes an issue where we were looking for context server project
settings in _all_ worktrees, not just visible ones.
This meant that if you had a single file worktree open (e.g.,
`settings.json`) this could impact whether context servers defined in
project settings would load.
Release Notes:
- Fixed an issue where context servers defined in project settings would
not be respected in some scenarios.
Co-authored-by: Wilhelm Klopp <wil.klopp@gmail.com>
This is a clean-up PR in anticipation of introduction of Debugger
Registry. I wanna get rid of DebugAdapterKind (or rather, it being an
enum).
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
<img width="620" alt="Screenshot 2025-03-27 at 2 29 13 PM"
src="https://github.com/user-attachments/assets/dd023507-61bc-4722-a095-f65f4b6c746a"
/>
We'll iterate on the UI, but first the goal is to just get it to work at
all so we can see if it's useful in terms of getting correct output
faster.
Release Notes:
- N/A
---------
Co-authored-by: Agus Zubiaga <hi@aguz.me>
Now if you refocus Zed manually (e.g. cmd-tab), we hide the "View Panel"
notification automatically.
This also fixes a related subscription leak.
Release Notes:
- N/A
Longer write-up, sorry if this got a bit too long.
This PR removes a small gap between the editor gutter and the horizontal
scrollbar, if present, by stretching the scrollbar track the entire
witdth of the editor.
https://github.com/user-attachments/assets/d5c18b03-d1ff-4d48-a3da-5d0fb80ee967
This gap which can be seen in the bottom left of the video can cause
bugs when interacting with it using the cursor, as accidentally clicking
on it would trigger a vertical scroll instead of dragging the horizontal
scroll. Also for cases where themes provide a non-transparent scrollbar
track background, which can be seen in the video, the small gap is
visible whilst scrolling horizontally.
This gap is present because the horizontal editor scrollbar is layouted
based upon the `content_origin`, which offsets the whole layout by the
horizontal gutter margin to the right. However, the scrollbar should be
layouted based upon the editor text bounds to be properly painted over
the entire editor text hitbox.
Here are some comparison images with `scrollbar.track.background` and
`gutter.background` set to red for visibility.
| | Current `main` | With this change |
| - | - | - |
| Default position / Fully scrolled to the left | <img width="842"
alt="left_main"
src="https://github.com/user-attachments/assets/8b053fc8-5271-4b58-8404-dcabf49bf702"
/> | <img width="842" alt="left_fix"
src="https://github.com/user-attachments/assets/459df723-05d5-4813-a6a4-038f7d662495"
/> |
| Scrolled to the right | <img width="216" alt="scroll_main"
src="https://github.com/user-attachments/assets/9c1fcc0d-fbb4-49af-9645-f258f5a7217b"
/> | <img width="216" alt="scroll_fix"
src="https://github.com/user-attachments/assets/8dd2e585-7802-415b-a05a-fb40a882323e"
/> |
---
#### Small downsight of this approach
Currently, the scrollbar thumb aligns with the indent guides if the
editor is fully scrolled to the left and the track background is
transparent. This is because the indent guides are layouted according to
the content margin.
With this change, however, the scrollbar thumb will shift a few pixels
to the left and will overlap the indent guides if present.
| Current `main` | With this change |
| - | - |
| <img width="295" alt="cur_indent"
src="https://github.com/user-attachments/assets/92753951-6f35-4c39-94eb-21c445f8d2f5"
/> | <img width="381" alt="fix_indent"
src="https://github.com/user-attachments/assets/899d945c-49f8-4117-bc48-52501d55cc33"
/> |
To circumvent this, the scrollbar thumb could be layouted with a small
offset so that the thumb aligns properly with the indent guides whilst
the scrollbar track spans the whole editor width. This would lead to
some questions on how to account for the gap during layouting and
dragging of the thumb though, but might work for a gap that small. Happy
to implement this fix, should that be preferred 😄
(VSCode does not have the indent guide issue, as they do not layout the
text in the editor with any offset unlike Zed does)
Release Notes:
- Removed a small gap between the editor gutter and horizontal
scrollbar.
Closes#25761#21603
When `text_edit` is not available we directly fallback to to `label`.
That means, when we have range to replace, we never use `insertText` and
only use it when we haven't found any range.
This PR fixes, this and uses `insertText` as fallback first, and then
`label`.
Release Notes:
- Fixed an issue where accepting LSP snippet completion would insert the
label instead of expanding the snippet.
Part of #27171
Follows-up the change in
https://github.com/zed-industries/zed/pull/22346 to consider the case
where the assistant-panel is disabled via settings (as also noted in
[this
comment](https://github.com/zed-industries/zed/pull/22346#issuecomment-2558372412),
Notably, only the explicit case is considered here. Can extend this
change to also cover the implicit case where the button is disabled if
requested.).
Currently, if the user toggles the right dock, the assistant panel will
be shown even if it is disabled via settings, because it has the highest
priority (see
https://github.com/zed-industries/zed/pull/22346#issuecomment-2564890493).
With this change, the assistant panel is no longer activated when
disabled and the dock with the next highest activation order is
activated instead.
I did not opt in to make the priority configurabe, as I agree with
https://github.com/zed-industries/zed/pull/22346#issuecomment-2564890493
that this will most likely rarely be used (the active panel is only none
on the first toggle of the dock, afterwards it remains set for the
remainder of the session).
Release Notes:
- `workspace::ToggleRightDock` will no longer open the assistant panel
when it is disabled via settings.
This PR hardcodes the font size for the OS notification and adjusts the
copywriting on the `DoneStreaming` scenario.
1. Reason for the former change is because notifications always have a
fixed width and height, so any responsive design strategy here wouldn't
fully work.
2. Reason for the latter is because when the assistant response is done
streaming, that _can_ mean "changes have been applied" (previous label)
but it can also not mean that. So, I'm making it more generic now.
Release Notes:
- N/A
This PR removes the `predict-edits-non-eager-mode` feature flag.
The feature is shipped, and we aren't referencing the flag anywhere
anymore.
Release Notes:
- N/A
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [log](https://redirect.github.com/rust-lang/log) |
workspace.dependencies | patch | `0.4.26` -> `0.4.27` |
---
### Release Notes
<details>
<summary>rust-lang/log (log)</summary>
###
[`v0.4.27`](https://redirect.github.com/rust-lang/log/blob/HEAD/CHANGELOG.md#0427---2025-03-24)
[Compare
Source](https://redirect.github.com/rust-lang/log/compare/0.4.26...0.4.27)
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
---------
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [oo7](https://redirect.github.com/bilelmoussaoui/oo7) | dependencies |
patch | `0.4.1` -> `0.4.3` |
---
### Release Notes
<details>
<summary>bilelmoussaoui/oo7 (oo7)</summary>
###
[`v0.4.3`](https://redirect.github.com/bilelmoussaoui/oo7/releases/tag/0.4.3)
[Compare
Source](https://redirect.github.com/bilelmoussaoui/oo7/compare/0.4.2...0.4.3)
- [cli: Add custom keyring file
support](248d96f225)
- [dbus/secret: Workaround gnome-keyring being non-spec
compliant](cac94b502f)
- [client: Deprecate
Keyring::with_broken_item_cleanup](cce024ba64)
- [cli: Add a new argument for listing all
items](88f5604147)
###
[`v0.4.2`](https://redirect.github.com/bilelmoussaoui/oo7/releases/tag/0.4.2)
#### What's Changed
Relax the condition when validating the file backend keyring secret and
provide various APIs to allow the developer to recover the non-broken
items in a keyring or delete the broken ones.
The root cause of the issue has not been identified but at least apps
will continue to work as normal if the developer uses
`Keyring::with_broken_item_cleanup` instead of `Keyring::new`.
More details can be found in
[#​207](https://redirect.github.com/bilelmoussaoui/oo7/issues/207)
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
|
[async-compression](https://redirect.github.com/Nullus157/async-compression)
| workspace.dependencies | patch | `0.4.21` -> `0.4.22` |
---
### Release Notes
<details>
<summary>Nullus157/async-compression (async-compression)</summary>
###
[`v0.4.22`](https://redirect.github.com/Nullus157/async-compression/blob/HEAD/CHANGELOG.md#0422---2025-03-25)
[Compare
Source](https://redirect.github.com/Nullus157/async-compression/compare/v0.4.21...v0.4.22)
##### Other
- Add lz4 encoder/decoder
- Expose total_in/total_out in DeflateEncoder
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [time](https://time-rs.github.io)
([source](https://redirect.github.com/time-rs/time)) |
workspace.dependencies | patch | `0.3.40` -> `0.3.41` |
---
### Release Notes
<details>
<summary>time-rs/time (time)</summary>
###
[`v0.3.41`](https://redirect.github.com/time-rs/time/blob/HEAD/CHANGELOG.md#0341-2025-03-23)
[Compare
Source](https://redirect.github.com/time-rs/time/compare/v0.3.40...v0.3.41)
##### Fixed
- Compatibility with the latest release of `deranged`. This fix is
permanent and covers future
similar changes upstream.
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [clap](https://redirect.github.com/clap-rs/clap) |
workspace.dependencies | patch | `4.5.32` -> `4.5.34` |
---
### Release Notes
<details>
<summary>clap-rs/clap (clap)</summary>
###
[`v4.5.34`](https://redirect.github.com/clap-rs/clap/blob/HEAD/CHANGELOG.md#4534---2025-03-27)
[Compare
Source](https://redirect.github.com/clap-rs/clap/compare/v4.5.33...v4.5.34)
##### Fixes
- *(help)* Don't add extra blank lines with `flatten_help(true)` and
subcommands without arguments
###
[`v4.5.33`](https://redirect.github.com/clap-rs/clap/blob/HEAD/CHANGELOG.md#4533---2025-03-26)
[Compare
Source](https://redirect.github.com/clap-rs/clap/compare/v4.5.32...v4.5.33)
##### Fixes
- *(error)* When showing the usage of a suggestion for an unknown
argument, don't show the group
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [plist](https://redirect.github.com/ebarnard/rust-plist) |
dependencies | patch | `1.7.0` -> `1.7.1` |
---
### Release Notes
<details>
<summary>ebarnard/rust-plist (plist)</summary>
###
[`v1.7.1`](https://redirect.github.com/ebarnard/rust-plist/compare/v1.7.0...v1.7.1)
[Compare
Source](https://redirect.github.com/ebarnard/rust-plist/compare/v1.7.0...v1.7.1)
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS4yMDcuMSIsInVwZGF0ZWRJblZlciI6IjM5LjIwNy4xIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Release Notes:
- Git: Fix crash when staging a hunk that overlaps multiple unstaged
hunks.
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This is another in the series of PRs to make the GitStore own all
repository state and enable better concurrency control for git
repository scans.
After this PR, the `RepositoryEntry`s stored in worktree snapshots are
used only as a staging ground for local GitStores to pull from after
git-related events; non-local worktrees don't store them at all,
although this is not reflected in the types. GitTraversal and other
places that need information about repositories get it from the
GitStore. The GitStore also takes over handling of the new
UpdateRepository and RemoveRepository messages. However, repositories
are still discovered and scanned on a per-worktree basis, and we're
still identifying them by the (worktree-specific) project entry ID of
their working directory.
- [x] Remove WorkDirectory from RepositoryEntry
- [x] Remove worktree IDs from repository-related RPC messages
- [x] Handle UpdateRepository and RemoveRepository RPCs from the
GitStore
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This PR fixes a bug where breakpoints would be rendered on incorrect
lines when openings a git hunk that contained breakpoints. This also
disables breakpoints from being shown in deleted git hunks as well.
Note: There's some unexpected behavior when using an anchor to get a
display point that is in an open git hunk, where the
`anchor.to_point().col == 0`.
```rust
let position = multi_buffer_anchor
.to_point(&multi_buffer_snapshot)
.to_display_point(&snapshot);
```
The above code will return a display point that is one line below where
the anchor actually represents when it's in an opened hunk diff. Which
causes the bug shown below
https://github.com/user-attachments/assets/bd15d02a-3cdc-4c8e-841f-bef238583351
@ConradIrwin Is this expected behavior when calling
`.to_display_point(&snapshot)`?
Release Notes:
- N/A
This change makes the git panel and project panel behave the same, on
Linux and macOS, and adds prompts.
Release Notes:
- Changed the git panel to prompt before restoring a file.
This required adding scrollbar support to `list`. Since `list` is
virtualized, the scrollbar height will change as more items are
measured. When the user manually drags the scrollbar, we'll persist the
initial height and offset calculations accordingly to prevent the
scrollbar from moving away from the cursor as new items are measured.
We're not doing this yet, but in the future, it'd be nice to budget some
time each frame to layout unmeasured items so that the scrollbar height
is as accurate as possible.
Release Notes:
- N/A
A readonly buffer built from a static `&str` output does not need rich
project-based capabilities, and leaking projects in global git panel
might be dangerous.
Also adds readonly capability to the buffer, as
`editor.set_read_only(true);` API is a separate thing.
Release Notes:
- N/A
Workaround for users affected by #25899
Thanks to the work done by @kvark in
https://github.com/kvark/blade/pull/210, we have the ability to tell
Vulkan (through blade) a specific GPU to use.
This will hopefully allow some of the users affected by #25899 to use
Zed by allowing them to use a specific GPU, if the primary/default GPU
will not work
Release Notes:
- Added the ability to specify which GPU Zed uses on Linux by setting
the `ZED_DEVICE_ID` environment variable. You can obtain the device ID
of your GPU by running `lspci -nn | grep VGA` which will output each GPU
on one line like:
```
08:00.0 VGA compatible controller [0300]: NVIDIA Corporation GA104
[GeForce RTX 3070] [10de:2484] (rev a1)
````
where the device ID here is `2484`. This value is in hexadecimal, so to
force Zed to use this specific GPU you would set the environment
variable like so:
```
ZED_DEVICE_ID=0x2484
```
Make sure to export the variable if you choose to define it globally in
a `.bashrc` or similar
Closes#4461
Take 2 on https://github.com/zed-industries/zed/pull/25040.
Fixes panic caused due to using `setHiddenUntilMouseMoves` return type
to `set` cursor on macOS.
Release Notes:
- Now cursor hides when the user is typing in editor. It will stay
hidden until it is moved again. This behavior is `true` by default, and
can be configured with `hide_mouse_while_typing` in settings.
---------
Co-authored-by: Peter Tripp <peter@zed.dev>
Co-authored-by: Thomas Mickley-Doyle <thomas@zed.dev>
Co-authored-by: Agus <agus@zed.dev>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Co-authored-by: Agus Zubiaga <hi@aguz.me>
Co-authored-by: Angelk90 <angelo.k90@hotmail.it>
This PR reworks how we store enabled tools in the `ToolWorkingSet`.
We now track them based on which tools are explicitly enabled, rather
than by the tools that have been disabled.
Also fixed an issue where switching profiles wouldn't properly set the
right tools.
Release Notes:
- N/A
Added support for using `language_server` as HTML formatter.
Added support for finding `vscode-html-language-server` in user's path.
Release Notes:
- N/A
Right now the toolchain popup is a nondescript list of duplicate entries
like `Python 3.10.15 (VirtualEnvWrapper)` and one has to look at the
interpreter path to distinguish one virtualenv from another.
Fix this by including the env name as reported by pet, so the entries
looks like `Python 3.10.15 (myproject; VirtualEnvWrapper)`.
Release Notes:
- Python: Improved display of environments in toolchain selector
You are an AI assistant integrated into a text editor. Your goal is to do one of the following two things:
You are an AI assistant integrated into a code editor. You have the programming ability of an expert programmer who takes pride in writing high-quality code and is driven to the point of obsession about solving problems effectively. Your goal is to do one of the following two things:
1. Help users answer questions and perform tasks related to their codebase.
2. Answer general-purpose questions unrelated to their particular codebase.
It will be up to you to decide which of these you are doing based on what the user has told you. When unclear, ask clarifying questions to understand the user's intent before proceeding.
You should only perform actions that modify the user’s system if explicitly requested by the user:
- If the user asks a question about how to accomplish a task, provide guidance or information, and use read-only tools (e.g., search) to assist. You may suggest potential actions, but do not directly modify the user’s system without explicit instruction.
You should only perform actions that modify the user's system if explicitly requested by the user:
- If the user asks a question about how to accomplish a task, provide guidance or information, and use read-only tools (e.g., search) to assist. You may suggest potential actions, but do not directly modify the user's system without explicit instruction.
- If the user clearly requests that you perform an action, carry out the action directly without explaining why you are doing so.
- The editing actions you perform might produce errors or warnings. At the end of your changes, check whether you introduced any problems, and fix them before providing a summary of the changes you made.
- Do not fix errors unrelated to your changes unless the user explicitly asks you to do so.
Be concise and direct in your responses.
When answering questions, it's okay to give incomplete examples containing comments about what would go there in a real version. When being asked to directly perform tasks on the code base, you must ALWAYS make fully working code. You may never "simplify" the code by omitting or deleting functionality you know the user has requested, and you must NEVER write comments like "in a full version, this would..." - instead, you must actually implement the real version. Don't be lazy!
Note that project files are automatically backed up. The user can always get them back later if anything goes wrong, so there's
no need to create backup files (e.g. `.bak` files) because these files will just take up unnecessary space on the user's disk.
When attempting to resolve issues around failing tests, never simply remove the failing tests. Unless the user explicitly asks you to remove tests, ALWAYS attempt to fix the code causing the tests to fail.
Ignore "TODO"-type comments unless they're relevant to the user's explicit request or the user specifically asks you to address them. It is, however, okay to include them in codebase summaries.
<style>
Editing code:
- Make sure to take previous edits into account.
- The edits you perform might lead to errors or warnings. At the end of your changes, check whether you introduced any problems, and fix them before providing a summary of the changes you made.
- You may only attempt to fix these up to 3 times. If you have tried 3 times to fix them, and there are still problems remaining, you must not continue trying to fix them, and must instead tell the user that there are problems remaining - and ask if the user would like you to attempt to solve them further.
- Do not fix errors unrelated to your changes unless the user explicitly asks you to do so.
- Prefer to move files over recreating them. The move can be followed by minor edits if required.
- If you seem to be stuck, never go back and "simplify the implementation" by deleting the parts of the implementation you're stuck on and replacing them with comments. If you ever feel the urge to do this, instead immediately stop whatever you're doing (even if the code is in a broken state), report that you are stuck, explain what you're stuck on, and ask the user how to proceed.
Tool use:
- Make sure to adhere to the tools schema.
- Provide every required argument.
- DO NOT use tools to access items that are already available in the context section.
- Use only the tools that are currently available.
- DO NOT use a tool that is not available just because it appears in the conversation. This means the user turned it off.
Responding:
- Be concise and direct in your responses.
- Never apologize or thank the user.
- Don't comment that you have just realized or understood something.
- When you are going to make a tool call, tersely explain your reasoning for choosing to use that tool, with no flourishes or commentary beyond that information.
For example, rather than saying "You're absolutely right! Thank you for providing that context. Now I understand that we're missing a dependency, and I need to add it:" say "I'll add that missing dependency:" instead.
- Also, don't restate what a tool call is about to do (or just did).
For example, don't say "Now I'm going to check diagnostics to see if there are any warnings or errors," followed by running a tool which checks diagnostics and reports warnings or errors; instead, just request the tool call without saying anything.
- All tool results are provided to you automatically, so DO NOT thank the user when this happens.
Whenever you mention a code block, you MUST use ONLY the following format:
```language path/to/Something.blah#L123-456
(code goes here)
```
The `#L123-456` means the line number range 123 through 456, and the path/to/Something.blah
is a path in the project. (If there is no valid path in the project, then you can use
/dev/null/path.extension for its path.) This is the ONLY valid way to format code blocks, because the Markdown parser
does not understand the more common ```language syntax, or bare ``` blocks. It only
understands this path-based syntax, and if the path is missing, then it will error and you will have to do it over again.
Just to be really clear about this, if you ever find yourself writing three backticks followed by a language name, STOP!
You have made a mistake. You can only ever put paths after triple backticks!
<example>
Based on all the information I've gathered, here's a summary of how this system works:
1. The README file is loaded into the system.
2. The system finds the first two headers, including everything in between. In this case, that would be:
```path/to/README.md#L8-12
# First Header
This is the info under the first header.
## Sub-header
```
3. Then the system finds the last header in the README:
```path/to/README.md#L27-29
## Last Header
This is the last header in the README.
```
4. Finally, it passes this information on to the next process.
</example>
<example>
In Markdown, hash marks signify headings. For example:
```/dev/null/example.md#L1-3
# Level 1 heading
## Level 2 heading
### Level 3 heading
```
</example>
Here are examples of ways you must never render code blocks:
<bad_example_do_not_do_this>
In Markdown, hash marks signify headings. For example:
```
# Level 1 heading
## Level 2 heading
### Level 3 heading
```
</bad_example_do_not_do_this>
This example is unacceptable because it does not include the path.
<bad_example_do_not_do_this>
In Markdown, hash marks signify headings. For example:
```markdown
# Level 1 heading
## Level 2 heading
### Level 3 heading
```
</bad_example_do_not_do_this>
This example is unacceptable because it has the language instead of the path.
<bad_example_do_not_do_this>
In Markdown, hash marks signify headings. For example:
# Level 1 heading
## Level 2 heading
### Level 3 heading
</bad_example_do_not_do_this>
This example is unacceptable because it uses indentation to mark the code block
instead of backticks with a path.
<bad_example_do_not_do_this>
In Markdown, hash marks signify headings. For example:
```markdown
/dev/null/example.md#L1-3
# Level 1 heading
## Level 2 heading
### Level 3 heading
```
</bad_example_do_not_do_this>
This example is unacceptable because the path is in the wrong place. The path must be directly after the opening backticks.
</style>
The user has opened a project that contains the following root directories/files. Whenever you specify a path in the project, it must be a relative path which begins with one of these root directories/files:
@@ -24,7 +155,7 @@ There are rules that apply to these root directories:
{{#eachworktrees}}
{{#ifrules_file}}
`{{root_name}}/{{rules_file.rel_path}}`:
`{{root_name}}/{{rules_file.path_in_worktree}}`:
``````
{{{rules_file.text}}}
@@ -32,3 +163,8 @@ There are rules that apply to these root directories:
A software developer is asking a question about their project. The source files in their project have been indexed into a database of semantic text embeddings.
Your task is to generate a list of 4 diverse search queries that can be run on this embedding database, in order to retrieve a list of code snippets
that are relevant to the developer's question. Redundant search queries will be heavily penalized, so only include another query if it's sufficiently
distinct from previous ones.
Here is the question that's been asked, together with context that the developer has added manually:
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
