This PR removes usages of `use gpui::*;` in the codebase (excluding
examples).
We should only use glob imports for `gpui::prelude`, and then import
everything else individually.
Release Notes:
- N/A
This is quite experimental and untested in languages other than Rust.
It's written to attempt to do something sensible in many languages. Due
to its experimental nature, just releasing to staff, and so not
including it in release notes. Future release note might be "Improved
diagnostic excerpts by using syntactic info to determine the context
lines to show."
Release Notes:
- N/A
Closes#17870
Context:
On Linux, when creating a new window, bounds are either pulled from
existing workspace data (serialized in an SQLite DB) or fall back to
some default constants if no data exists.
These bounds include the full dimensions of the window (width and
height), which already account for insets. However, properties like
`inset` (Wayland) or `last_insets` (X11) exist only at the platform
level and are not part of the window bounds themselves.
During rendering, we call `set_client_inset`, which updates the inset
values and also adjusts the window bounds, increasing their dimensions.
In Zed's case, the inset is 10px, which adds 20px to both the width and
height (10px from each side).
Problem:
When quitting, the full window bounds (which already account for inset)
are saved to the DB. On reopening, these saved bounds are used to create
the window. `set_client_inset` runs again and inflates the dimensions
even more.
Solution:
Store window bounds *without* the inset-inflated dimensions. On the next
session, `set_client_inset` will take care of applying the inset,
resulting window dimensions matching the previous session. This fix is
in the PR.
Alternative Solution:
Another option is to save the inset explicitly in the DB and apply it
during window creation. But this means storing more data, and the inset
would need to be platform-agnostic, which adds complexity. Doesn’t seem
worth it for no real gain.
X11 Before:
```sh
saving window bounds with width: 1136, height: 784
tims@lemon ~/w/zed (fix-window-growing-larger)> cargo run
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.37s
Running `target/debug/zed`
saving window bounds with width: 1156, height: 804 <---- +20px
tims@lemon ~/w/zed (fix-window-growing-larger)> cargo run
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.35s
Running `target/debug/zed`
saving window bounds with width: 1176, height: 824 <---- +20px
tims@lemon ~/w/zed (fix-window-growing-larger)> cargo run
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.36s
Running `target/debug/zed`
saving window bounds with width: 1196, height: 844 <---- +20px
```
X11 After:
```sh
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.35s
Running `target/debug/zed`
saving window bounds with width: 1116, height: 764
tims@lemon ~/w/zed (fix-window-growing-larger)> cargo run
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.35s
Running `target/debug/zed`
saving window bounds with width: 1116, height: 764 <---- same
tims@lemon ~/w/zed (fix-window-growing-larger)> cargo run
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.35s
Running `target/debug/zed`
saving window bounds with width: 1116, height: 764 <---- same
```
On Wayland, saving occurs only when you actually resize the window (on
X11, saving happens both on init and while dragging the window). To
trigger saving, I manually resized the window by ~1px to make it print.
Wayland Before:
```sh
Finished `dev` profile [unoptimized + debuginfo] target(s) in 1m 36s
Running `target/debug/zed`
saving window bounds with width: 945, height: 577
tims@orange ~/zed (fix-window-growing-larger)> cargo run
Finished `dev` profile [unoptimized + debuginfo] target(s) in 1.77s
Running `target/debug/zed`
saving window bounds with width: 966, height: 597 <--- +20px on both (1px increase in width is me resizing)
tims@orange ~/zed (fix-window-growing-larger)> cargo run
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.87s
Running `target/debug/zed`
saving window bounds with width: 987, height: 618 <--- +20px on both (1px increase in width and height is me resizing)
tims@orange ~/zed (fix-window-growing-larger)> cargo run
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.89s
Running `target/debug/zed`
saving window bounds with width: 1006, height: 638 <--- +20px on both (1px decrease in width is me resizing)
```
Wayland After:
```sh
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.82s
Running `target/debug/zed`
saving window bounds with width: 925, height: 558
tims@orange ~/zed (fix-window-growing-larger)> cargo run
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.84s
Running `target/debug/zed`
saving window bounds with width: 925, height: 557 <--- same (1px decrease in height is me resizing)
saving window bounds with width: 925, height: 558
```
Release Notes:
- Fix non-maximized zed windows growing larger across sessions on Linux
---------
Co-authored-by: mgsloan@gmail.com <michael@zed.dev>
Leaving release notes as N/A because it had release notes in the past in
#21705
In #21286, documentation resolution was made more efficient by only
resolving the current completion. However, this meant that single line
documentation shown inline in the menu was missing until scrolled
to. This also meant that it would wait for navigation to resolve
completion docs, leading to lag for displaying documentation.
This change resolves this by attempting to fetch all the completions
that will be shown. It also mostly avoids re-resolving completions. It
intentionally re-resolves the current selection on navigation, as some
language servers will respond with more information later on.
Release Notes:
- N/A
No issue attached, as this is something trivial and should have been
part of my merged PR
[here](https://github.com/zed-industries/zed/pull/22073).
For context, in the above-mentioned PR, I removed the hover color from
selected/marked entries in the Project Panel. The reasoning behind this
change is already explained in that PR, but to reiterate:
> This change was inspired by the behavior in VSCode, the Firefox
sidebar, and Dolphin (KDE File Manager). When an item is selected, it
doesn’t display a separate hover state to avoid confusing users about
whether the item is selected or merely hovered over.
@nilskch mentioned in the comments of the above PR that I should have
also changed the background of the knockout icon, which appears on
entries, to match the entry background color on hover. This PR addresses
that.
Before:
After:
Release Notes:
- N/A
We've received a complaint on Discord about bad multicursor performance.
I too run 15k cursor simultaneously. The gist of the issue was in the
lsp_ext; whenever we gather up actions to be registered on a buffer, we
need to know whether a buffer has any of the languages for which we have
LSP extensions. The problem stemed from the fact that we did a two-phase
filtering. For each selection we'd first check whether this selection
lies in a part of a file that is part of a language for which we have
LSP extensions. Then, we'd check whether we're running a language server
of interest for this buffer.
This is not optimal, because it would often do the redundant work:
1. We resolve selections for buffer that are known to not contain a
given language server.
2. We look up language server in the LspStore once per each matching
selection.
In case where the file is not related at all, we end up resolving all of
the selections which is pretty bad. This PR makes us skip buffers which
are known to not match the criteria. It also caches the result of
language server lookup for the buffers.
Closes #ISSUE
Release Notes:
- Improved performance with large quantity of cursors
This message has confused me many times too: we printed the status as
"Downloading" when we were only checking whether we need to install a
given version of a language server.
This fixes the issue for Node-based language servers where we had the
same check in all implementations.
Closes #22241
Release Notes:
- Fixed some language servers reporting status as "Downloading..." when
only a version check was being done.
This PR removes the gate that limited Assistant2 to development builds,
so that we can start testing it out in Nightly.
Note that currently this still requires explicit opt-in to the
`assistant2` feature flag.
Release Notes:
- N/A
Expands #18715
Release Notes:
- Added arrow keys movement to the built-in terminal's [vi
mode](https://github.com/alacritty/alacritty/blob/master/docs/features.md#vi-mode)
(which is using Alacritty under the hood).
Details
--
A minuscule improvement on #18715 to allow user with alternative
keyboard layouts to use the terminal's vi mode with the arrow keys.
Fixes#22151.
Turns out Vim also has some weird behavior with sentence deletion in
case it's on the first character of a line.
Release Notes:
- vim: Fixed deleting sentence-wise (i.e. `d(` and `d)`), which would
previously delete the whole line instead of just a sentence.
This PR ensures that, for fixed-width fonts, the cursor width is the
same on blank lines as on non-blank lines, as well as at the end of a
line. It does so by using the em advance to define the cursor width
instead of the em width in these cases.
Note that this can look... bizarre on non-fixed-width fonts:
<img width="93" alt="Screenshot 2024-12-19 at 21 43 11"
src="https://github.com/user-attachments/assets/a4c9b26c-98ea-4a1d-947b-51f1acd3c2f8"
/>
However, this is arguably reasonably consistent with how (terminal) Vim
handles it:
<img width="45" alt="Screenshot 2024-12-19 at 21 46 42"
src="https://github.com/user-attachments/assets/ec3ff614-7a15-4cc3-8d14-3d15ce62f2b8"
/>
Closes#22260.
Release Notes:
- N/A
Closes#22264
On Linux, the arrow cursor style currently used by Zed is `arrow`.
However, this style might not be available in most themes, causing the
cursor to fall back to system default theme. Note cursor style are
platform (X11 and Wayland) agnostic.
Most themes use `left_ptr` as their arrow cursor style instead of
`arrow`. In some cases, `left_ptr` and `arrow` are symlinks pointing to
the `default` style, but the `default` style is not guaranteed to be
available across all themes.
After inspecting the available cursor themes on popular desktop
environments, changing the default from `arrow` to `left_ptr` seems to
be available in all of them. `left_ptr` as default cursor style is also
mentioned in [Arch Wiki: Cursor
themes](https://wiki.archlinux.org/title/Cursor_themes#Change_X_shaped_default_cursor).
KDE:
```sh
tims@lemon /u/s/icons> find . -name "arrow"
./Breeze_Snow/cursors/arrow
./breeze_cursors/cursors/arrow
./Adwaita/cursors/arrow
tims@lemon /u/s/icons> find . -name "default"
./default
./Breeze_Snow/cursors/default
./breeze_cursors/cursors/default
./Adwaita/cursors/default
tims@lemon /u/s/icons> find . -name "left_ptr"
./Oxygen_White/cursors/left_ptr
./KDE_Classic/cursors/left_ptr
./Oxygen_Yellow/cursors/left_ptr
./Oxygen_Blue/cursors/left_ptr
./Oxygen_Black/cursors/left_ptr
./Breeze_Snow/cursors/left_ptr
./breeze_cursors/cursors/left_ptr
./Adwaita/cursors/left_ptr
./Oxygen_Zion/cursors/left_ptr
```
Gnome:
```sh
tims@orange:/usr/share/icons$ find . -name "arrow"
./DMZ-Black/cursors/arrow
./Adwaita/cursors/arrow
./redglass/cursors/arrow
./whiteglass/cursors/arrow
./handhelds/cursors/arrow
./Yaru/cursors/arrow
./DMZ-White/cursors/arrow
tims@orange:/usr/share/icons$ find . -name "default"
./Adwaita/cursors/default
./default
./Yaru/cursors/default
tims@orange:/usr/share/icons$ find . -name "left_ptr"
./DMZ-Black/cursors/left_ptr
./Adwaita/cursors/left_ptr
./redglass/cursors/left_ptr
./whiteglass/cursors/left_ptr
./handhelds/cursors/left_ptr
./Yaru/cursors/left_ptr
./DMZ-White/cursors/left_ptr
```
My theme is set to Oxygen Yellow here.
Before:
<img
src="https://github.com/user-attachments/assets/7485f1e7-5936-45b4-96bd-399525bad95d"
alt="before" width="450px" />
After:
<img
src="https://github.com/user-attachments/assets/56090735-6a1f-4652-ad3e-075ff4c3f9ab"
alt="after" width="450px" />
Release Notes:
- Fixed wrong cursor theme for arrow cursor style on Linux.
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [aws-config](https://redirect.github.com/smithy-lang/smithy-rs) |
dependencies | patch | `1.5.10` -> `1.5.11` |
| [aws-sdk-kinesis](https://redirect.github.com/awslabs/aws-sdk-rust) |
dependencies | minor | `1.52.0` -> `1.53.0` |
| [aws-sdk-s3](https://redirect.github.com/awslabs/aws-sdk-rust) |
dependencies | minor | `1.65.0` -> `1.66.0` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
👻 **Immortal**: This PR will be recreated if closed unmerged. Get
[config
help](https://redirect.github.com/renovatebot/renovate/discussions) if
that's undesired.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS43Mi41IiwidXBkYXRlZEluVmVyIjoiMzkuNzIuNSIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [hyper](https://hyper.rs)
([source](https://redirect.github.com/hyperium/hyper)) |
workspace.dependencies | patch | `0.14.31` -> `0.14.32` |
---
### Release Notes
<details>
<summary>hyperium/hyper (hyper)</summary>
###
[`v0.14.32`](https://redirect.github.com/hyperium/hyper/releases/tag/v0.14.32)
[Compare
Source](https://redirect.github.com/hyperium/hyper/compare/v0.14.31...v0.14.32)
#### Features
- **server:** add `Builder::max_pending_accept_reset_streams(num)`
option
([a24f0c0](a24f0c0af8))
#### Bug Fixes
- **http1:** fix intermittent panic parsing partial headers
([0f274ae](0f274ae653))
#### New Contributors
- [@​cratelyn](https://redirect.github.com/cratelyn) made their
first contribution in
[https://github.com/hyperium/hyper/pull/3796](https://redirect.github.com/hyperium/hyper/pull/3796)
**Full Changelog**:
https://github.com/hyperium/hyper/compare/v0.14.31...v0.14.32
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS43Mi41IiwidXBkYXRlZEluVmVyIjoiMzkuNzIuNSIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [semver](https://redirect.github.com/dtolnay/semver) |
workspace.dependencies | patch | `1.0.23` -> `1.0.24` |
---
### Release Notes
<details>
<summary>dtolnay/semver (semver)</summary>
###
[`v1.0.24`](https://redirect.github.com/dtolnay/semver/releases/tag/1.0.24)
[Compare
Source](https://redirect.github.com/dtolnay/semver/compare/1.0.23...1.0.24)
- Optimize Ord impls for semver::Prerelease and semver::BuildMetadata
([#​328](https://redirect.github.com/dtolnay/semver/issues/328),
thanks [@​Eh2406](https://redirect.github.com/Eh2406))
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS43Mi41IiwidXBkYXRlZEluVmVyIjoiMzkuNzIuNSIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [tree-sitter-c](https://redirect.github.com/tree-sitter/tree-sitter-c)
| workspace.dependencies | patch | `0.23.2` -> `0.23.4` |
---
### Release Notes
<details>
<summary>tree-sitter/tree-sitter-c (tree-sitter-c)</summary>
###
[`v0.23.4`](https://redirect.github.com/tree-sitter/tree-sitter-c/releases/tag/v0.23.4)
[Compare
Source](https://redirect.github.com/tree-sitter/tree-sitter-c/compare/v0.23.2...v0.23.4)
**NOTE:** Download `tree-sitter-c.tar.xz` for the *complete* source
code.
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOS43Mi41IiwidXBkYXRlZEluVmVyIjoiMzkuNzIuNSIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Closes#13585
Currently, saving files with `root` ownership or `root` as the group
throws a `Permission denied (os error 13). Please try again.` error.
This PR fixes the issue on Linux by prompting the user for a password
and saving the file with elevated privileges.
It uses `pkexec` (Polkit), which is by default available on GNOME, KDE,
and most Linux systems. I haven't implemented this for macOS as I don't
have a device to test it on.
This implementation is similar to how Vscode handles it. Except, they
don't show custom message.
**Working**:
When file saving fails due to a `PermissionDenied` error, we create a
temporary file in the same directory as the target file and writes the
data to this temporary file. After, the contents of this file are copied
to the original file using the `tee` command instead of `cp` or `mv`.
This ensures that the ownership and permissions of the original file are
preserved. This command is executed using `pkexec` which will prompt
user for their password.
**Custom Message**:
The message displayed to the user in the prompt is automatically
retrieved from the `org.zed.app.policy` file, which is located at
`/usr/share/polkit-1/actions/`. This file should be installed during the
setup process. While the policy file is optional, omitting it will cause
the user to see the underlying command being executed rather than a
user-friendly message. Currently, VSCode does not display the
user-friendly message.
The policy file must specify a unique binary, ensuring that only that
binary can use the policy file. It cannot be as generic as a
`/bin/bash`, as any software using bash to prompt will end up showing
Zed’s custom message. To address this, we will create a custom bash
script, as simple as the following, placed in `/usr/bin/zed/elevate.sh`.
The script should have root ownership and should not reside in the home
directory, since the policy file cannot resolve `$HOME`.
```sh
#!/bin/bash
eval "$@"
```
*IMPORTANT NOTE*
Since copying the policy file and our script requires sudo privileges,
the installation script will now prompt for the password at very end.
Only on Linux, if `pexec` is installed.
Screenshots:
KDE with policy file:
Gnome with policy file:
Gnome without policy file:
VSCode:
User declines the permission request:
Release Notes:
- Fixed file saving with root ownership on Linux.
This PR is a follow up to #22254 with a different approach.
We need to put the conditional on each step in order to skip them, as I
couldn't see any other way of bailing out of the pipeline early based on
a condition.
Release Notes:
- N/A
Closes#21505. This should work if the git dir is an ancestor of the
worktree dir or vice versa.
Release Notes:
- Fixed GitHub permalink-to-line actions when worktree dir and Git dir
aren't the same
Update macOS system requirements to include Sequoia (15.x), the latest
major version.
Release Notes:
- N/A
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
The command used to activate the venv can still be accessed/scrolled to
if needed.
Release Notes:
- The Python virtual environment activation command is no longer shown
in the terminal output by default.
Co-authored-by: Peter Tripp <peter@zed.dev>
This doesn't include the outline in the prompt yet, but it does send it
up via telemetry so we can use it to see whether it would have improved
generated output.
Release Notes:
- N/A
Co-authored-by: Agus <agus@zed.dev>
I noticed a problem with the addition of required status checks where
PRs that only touched the docs wouldn't pass the status checks due to
all of the checks being skipped via `paths-ignore`:
<img width="950" alt="Screenshot 2024-12-19 at 11 16 38 AM"
src="https://github.com/user-attachments/assets/a6fa43ee-de63-40a6-a15a-f2f3519e9db8"
/>
This PR aims to address this by making it so required status checks run
for docs-only PRs, but exit early (before doing all of the work).
Release Notes:
- N/A
Fixes https://github.com/zed-industries/zed/issues/21972
This fixes two bugs:
**Bug 1**: this bug caused us to only ever load a single environment in
a multi-worktree project, thanks to this line:
```rust
if let Some(task) = self.get_environment_task.as_ref()
```
We'd only ever run a single task per project, which is wrong.
What does code does is to cache the tasks per `worktree_id`, which means
we don't even need to cache the environments again, since we can just
cache the `Shared<Task<...>>`.
**Bug 2**: we assumed that every `worktree_abs_path` is a directory,
which lead to `Failed to run direnv` log messages when opening a project
that had a worktree with a single file open (easy to reproduce: open a
normal project, open your settings, close Zed, reopen it — the settings
faile caused environments to not load)
It's fixed by checking whether the `worktree_abs_path` is an absolute
directory. Since this is always running locally, it's fine to use
`smol::fs` here instead of using our `Fs`.
Release Notes:
- Fixed shell environments not being loaded properly to be used by
language servers and terminals in case a project had multiple worktrees.
- Fixed `Failed to run direnv` messages showing up in case Zed restored
a window that contained a worktree with a single file.
https://github.com/zed-industries/zed/issues/21972
For example, `editor::TabPrev` matches "editor: tab prev".
Release Notes:
- Added support for searching command palette using keymap-style action
names.
---------
Co-authored-by: Peter Tripp <peter@zed.dev>
