It is now possible to configure logging level of CodeLLDB adapter via
envs specified in project settings like so:
```
{
"dap": {
"CodeLLDB": {
"envs": {
"RUST_LOG": "debug"
}
}
}
}
```
Release Notes:
- N/A
Fixes#40034
Release Notes:
- `ctrl-c` (when you have a selection) and `ctrl-v` are now bound to
copy and paste by default in the windows terminal.
Co-authored-by: John Tur <john-tur@outlook.com>
Hello,
Thanks for the great work.
I am adding some more bindings for the emacs keymap:
- `command_palette::Toggle` as replacement for the emacs command
dispatcher
- other default aliases for existing move / delete commands
- e.g. `alt-left` to move to previous word and `alt-del` to delete it
- some missing `SelectTo` equivalents for move commands on selection
mode
Release Notes:
- Added bindings for the Emacs keymap
Closes#40334
This reverts the change made in #39983, and includes a replacement
migration that will transform formatter settings values consisting of
only `code_action` format steps into the previously deprecated
`code_actions_on_format` in an attempt to restore the behavior to what
it was before the migration that deprecated `code_actions_on_format`.
This PR will result in a modified order in the `code_actions_on_format`
setting if it existed, however the decision was made to explicitly
ignore this for now, as this PR is primarily targeting users who have
already had the deprecation migration run, and no longer have the
`code_actions_on_format` key
Release Notes:
- Fixed an issue with a settings migration that deprecated the
`code_actions_on_format` setting. The `code_actions_on_format` setting
has been un-deprecated, and affected users will have the bad migration
rolled back with an updated migration
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
Co-authored-by: HactarCE <6060305+HactarCE@users.noreply.github.com>
`vim::Substitute` is a little different from the helix behavior, so this
PR adds helix versions. The most important difference (for my usage, at
least) is that if you're selecting whole lines then helix drops the `\n`
from the selection (much like vim's lines mode, except that helix bases
this behavior on the selection instead of having a different mode).
Release Notes:
- N/A
Closes#33637Closes#37332
and solves part of
https://github.com/zed-industries/zed/discussions/33580#discussioncomment-14195506
This improves the "C" and "alt-C" actions to work like helix.
It also adds "," which removes all but the newest cursors. In helix the
one that's left would be the primary selection, but I don't think that
has an equivalent yet, so this simulates what would be the primary
selection if it was never cycled with "(" ")".
Release Notes:
- Improved multicursor creation and deletion in helix mode
---------
Co-authored-by: Jakub Konka <kubkon@jakubkonka.com>
Update the keybindings used in the default keymaps to better align with
VSCode's defaults, with the following changes:
* Windows & Linux
* `ctrl-enter` has been replaced by `ctrl-i` for
`assistant::InlineAssist`
* `ctrl-shift-space` maps to `editor::ShowSignatureHelp` instead of
`editor::ShowWordCompletions`
* MacOS
* `ctrl-enter` has been replaced by `cmd-i` for
`assistant::InlineAssist`
* `cmd-i` has been replaced by `cmd-shift-space` for
`editor::ShowSignatureHelp`
Closes#39278
Release Notes:
- Changed the keybinding for `assistant: inline assist` from
`ctrl-enter` to `ctrl-i` for both Linux and Windows, and `cmd-i` for
MacOS. If you'd like to restore the old behavior, update your keymap
file with:
```
{
"context": "!ContextEditor > Editor && mode == full",
"bindings": {
"ctrl-enter": "assistant::InlineAssist"
}
}
```
- Changed the action dispatched by `ctrl-shift-space` from
`editor::ShowWordCompletions` to `editor::ShowSignatureHelp` on both
Linux and Windows. If you'd like to restore the old behavior, update
your keymap file with:
``` {
"context": "Editor",
"bindings": {
"ctrl-shift-space": "editor::ShowWordCompletions"
}
}
```
- Changed the keybinding for `editor: show signature help` on MacOS from
`cmd-i` to `cmd-shift-space`. If you'd like to restore the old behavior,
update your keymap file with:
``` {
"context": "Editor",
"bindings": {
"cmd-i": "editor::ShowSignatureHelp"
}
}
```
---------
Co-authored-by: Agus Zubiaga <agus@zed.dev>
- Add `skip_soft_wrap` field to both `AddSelectionAbove` and
`AddSelectionBelow` actions. When set to `true`, which is now
the default this will skip soft wrapped lines when extending the
selections.
- Move the `start_of_relative_buffer_row` function from the
`vim::motion` module to the `editor::display_map::DisplaySnapshot`
implementation as a method.
- Update the default behavior for both `editor: add selection above` and
`editor: add selection below` commands in order to skip over soft
wrapped lines by default, mirroring VS Code's default behavior.
- Update existing keymaps to specify this `skip_soft_wrap` value for
both `AddSelectionAbove` and `AddSelectionBelow` actions.
Closes#16979
Release Notes:
- Updated both the `editor: add selection above` and `editor: add
selection below` commands to ignore soft wrapped lines. If you wish to
restore the old behavior, add the following to your keymap file:
```
{
"context": "Editor",
"bindings": {
"cmd-alt-up": ["editor::AddSelectionAbove", { "skip_soft_wrap": false
}],
"cmd-alt-down": ["editor::AddSelectionBelow", { "skip_soft_wrap": false
}]
}
}
```
---------
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
Closes#40234
Release Notes:
- Added `open_file_on_paste` setting to configure auto opening of file
on paste in the project panel.
---------
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
### What does this PR do?
- Adds default keybindings `gt` for navigating to the next tab and `gT`
for navigating to the previous tab in markdown viewer mode
### Why do we need this change?
- While previewing markdown files, the default vim bindings (`gt` and
`gT`) do not work for navigating between tabs. These bindings work
everywhere else, which provides a non-consistent experience for the
user.
### How do we do this change?
- Update the vim mode bindings to explicitly add handling for this mode
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Follow up for: #39983 and
https://github.com/zed-industries/zed/pull/40040#issuecomment-3393902691
Previously it was possible to have formatting done using prettier or
language server using `"formatter": "auto"` and specify code actions to
apply on format using the `"code_actions_on_format"` setting. However,
post #39983 this is no longer possible due to the removal of the
`"code_actions_on_format"` setting. To rectify this regression, this PR
makes it so that the `"auto"` and `"language_server"` strings that were
previously only allowed as top level values on the `"formatter"` key,
are now allowed as format steps like so:
```json
{
"formatter": ["auto", "language_server"]
}
```
Therefore to replicate the previous behavior using `"auto"` and
`"code_actions_on_format"` you can use the following configuration:
```json
{
"formatter": [{"code_action": ...}, "auto"]
}
```
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Release Notes:
- settings ui: Navigating the settings navbar with arrow keys up and
down now also activates the page, allowing users to more quickly see the
content for a given page before moving focus to the page itself.
Closes#5185
Release Notes:
- Added an option to hide hidden files in the project panel by setting
`hide_hidden` in the project panel settings.
---------
Co-authored-by: Gaauwe Rombouts <gromdroid@gmail.com>
Co-authored-by: Gaauwe Rombouts <mail@grombouts.nl>
Includes improvements in button padding, ways we space elements out,
more consistent use of some components, and cleaning up redundant
buttons styles. Pretty much nothing changes in the design, though.
Release Notes:
- N/A
Closes #ISSUE
Annotated our `default.json` with `$schema` to get diagnostics, then
fixed the non-language not installed warnings.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Closes #ISSUE
Release Notes:
- settings: Deprecated `code_actions_on_format` in favor of specifying
code actions to run on format inline in the `formatter` array.
Previously, you would configure code actions to run on format like this:
```json
{
"code_actions_on_format": {
"source.organizeImports": true,
"source.fixAll.eslint": true
}
}
```
This has been migrated to the new format:
```json
{
"formatter": [
{
"code_action": "source.organizeImports"
},
{
"code_action": "source.fixAll.eslint"
}
]
}
```
This change will be automatically migrated for you. If you had an
existing `formatter` setting, the code actions are prepended to your
formatter array (matching the existing behavior). This migration applies
to both global settings and language-specific settings
This PR renames the following actions to make it easier and prioritize
the UI version of interacting with them:
| Before | After |
|--------|--------|
| `OpenSettingsEditor` | `OpenSettings` |
| `OpenSettings` | `OpenSettingsFile` |
| `OpenKeymapEditor` | `OpenKeymap` |
| `OpenKeymap` | `OpenKeymapFile` |
Release Notes:
- Rename actions to open settings (UI/window and JSON file) as well as
to open the keymap (editor tab and JSON file).
- Update `AcpThreadView.insert_selections` to take into account whether
the user is currently editing an existing message and, if it is, insert
the selection into that message instead of the thread's message editor
- Update Window's default keymap to use the `agent::QuoteSelection`
action instead of the deprecated `assistant::QuoteSelection` action
- Introduce `AcpThreadView.active_editor` to allow callers to retrieve
either the thread view's message editor or the editor for the message
being edited, in case `AcpThreadView.editing_message` is not `None`
- Improve `AcpThreadView.focus_handle` to focus on the message being
currently edited in case the user navigates back to the editor and then
to the thread view again, all while editing a message
- Add tests for `AcpThreadView.insert_selections`, ensuring that the
selection is inserted in the message being currently edited, if a
message is being edited, or the thread view's message editor if no
message is being edited
Closes#39693
Release Notes:
- Improved `agent: quote selection` to also work for a message that was
already sent but is being edited
---------
Co-authored-by: Ben Brandt <benjamin.j.brandt@gmail.com>
These changes refactor the whitespace handling logic for Vim's change
surrounds command (`cs`), making its behavior closely match
[tpope/vim-surround](https://github.com/tpope/vim-surround), following
[this
discussion](https://github.com/zed-industries/zed/issues/38169#issuecomment-3304129461).
Zed's current implementation has two main differences when compared to
[tpope/vim-surround](https://github.com/tpope/vim-surround):
- It only considers whether a single space should be added or removed,
instead of all the space that is between the surrounding character and
the content
- It only takes into consideration the new surrounding characters in
order to determine whether to add or remove that space
A review of
[tpope/vim-surround](https://github.com/tpope/vim-surround)'s behavior
reveals these rules for whitespace:
* Quote to Quote
* Whitespace is never changed
* Quote to Bracket
* If opening bracket, add one space
* If closing bracket, do not add space
* Bracket to Bracket
* If opening to opening, keep only one space
* If opening to closing, remove all space
* If closing to opening, add one space
* If closing to closing, do not change space
* Bracket to Quote
* If opening, remove all space
* If closing, preserve all space
Below is a table with examples for each scenario. A new test has also
been added to specifically check the scenarios outlined above,
`vim::surrounds::test::test_change_surrounds_vim`.
| Type | Before | Command | After |
|-------------------|-------------|---------|---------------|
| Quote → Quote | `' a '` | `cs'"` | `" a "` |
| Quote → Quote | `" a "` | `cs"'` | `' a '` |
| Quote → Bracket | `' a '` | `cs'{` | `{ a }` |
| Quote → Bracket | `' a '` | `cs'}` | `{ a }` |
| Bracket → Bracket | `[ a ]` | `cs[{` | `{ a }` |
| Bracket → Bracket | `[ a ]` | `cs[}` | `{a}` |
| Bracket → Bracket | `[ a ]` | `cs]{` | `{ a }` |
| Bracket → Bracket | `[ a ]` | `cs]}` | `{ a }` |
| Bracket → Quote | `[ a ]` | `cs['` | `'a'` |
| Bracket → Quote | `[ a ]` | `cs]'` | `' a '` |
These changes diverge from
[tpope/vim-surround](https://github.com/tpope/vim-surround) when
handling newlines. For example, with the following snippet:
```rust
fn test_surround() {
if 2 > 1 {
println!("place cursor here");
}
};
```
Placing the cursor inside the string and running any combination of
`cs{[`, `cs{]`, `cs}[`, or `cs}]` would previously remove newline
characters. With these changes, using commands like `cs}]` will now
preserve newlines.
Related to #38169Closes#39334
Release Notes:
- Improved Vim’s change surround command to closely match
[tpope/vim-surround](https://github.com/tpope/vim-surround) behavior.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes #ISSUE
From notes:
```markdown
- [x] Clicking on the disclsoure icon button in the root-level tree view item should steal focus and move it to the root item (not the icon button)
- [x] [@ben] Allow left/right arrow keys to expand/collapse root tree view items in the nav
- [x] With this, make enter/space work the same as clicking (activate page, don't expand root items, focus moves to the content and leaves nav — becomes consistent with mouse interaction)
- [x] Smart cmd-shift-e: toggling focus should take you to the selected item
- [x] [@ben] pageup + pagedown in nav -> jump between root items
- [x] [@ben] home + end buttons should work
- in nav:
- home always goes to first section header
- end always goes to last _visible_ item (does not expand)
```
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Release Notes:
- Added Codestral edit predictions provider which can be enabled by adding an API key in the Mistral section of agent settings.
## Config
Get API key from https://console.mistral.ai/codestral and add it in the Mistral section of the agent settings.
```
"features": {
"edit_prediction_provider": "codestral"
},
"edit_predictions": {
"codestral": {
"model": "codestral-latest",
"max_tokens": 150
}
},
```
---------
Co-authored-by: Michael Sloan <michael@zed.dev>
## Description
Fixes#39376
Add individual FoldAtLevel1-9 actions so users can find fold commands in
the command palette while keeping existing keybindings.
Migrating user keymaps is necessary to have the keybinds show in the command palette.
Closes#39376
### Changes
- `crates/editor/src/actions.rs` - Added FoldAtLevel1-9 action structs
- `crates/editor/src/editor.rs` - Implemented fold_at_level_1-9 handler
methods
- `crates/editor/src/element.rs` - Registered new actions
- `assets/keymaps/*.json` - Updated keybindings to use new individual
actions
### Other Approaches considered
- Adding #[serde(default)] to existing FoldAtLevel(u32) - wouldn't make
it discoverable
- Creating a single action with enumerated variants - idk about this
that well.
### Release Notes
Release Notes:
- Added Fold At Level 1-9 actions to the command palette
---------
Co-authored-by: HactarCE <6060305+HactarCE@users.noreply.github.com>
Follow up to https://github.com/zed-industries/zed/pull/39468.
Unlike `agent_ui_font_size`, the `agent_buffer_font_size` setting does
have a default value, which means it does not fall back to the regular
UI font size, but rather to its default value.
Release Notes:
- N/A
This PR adds the numeric stepper component to the settings ui and
implements some settings that rely on this component as well.
I also switched {buffer/ui}_font_weight to the `gpui::FontWeight` type
and added a manual implementation of the Schemars trait. This allows Zed
to send min, max, and default information to the JSON LSP when a user is
manually editing the settings file.
The numeric stepper elements added to the settings ui are below:
- ui font size
- ui font weight
- Buffer font size
- Buffer font weight
- Scroll sensitivity
- Fast scroll sensitivity
- Vertical scroll margin
- Horizontal scroll margin
- Inline blame padding
- Inline blame delay
- Inline blame min column
- Unnecessary code fade
- Tab Size
- Hover popover delay
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/39406
Follow up to https://github.com/zed-industries/zed/pull/38726
This PR introduces the `agent_buffer_font_size` setting and renames
`agent_font_size` to `agent_ui_font_size`. This allows whoever wants
`buffer_font_size` and `agent_buffer_font_size` to match, as well as
folks who want a slightly smaller size only in the agent panel (which...
also looks just better by default!).
Release Notes:
- agent: Introduced the `agent_buffer_font_size` setting and renamed
`agent_font_size` to `agent_ui_font_size`, allowing for granular buffer
font size control in the agent panel vs. regular editors.
This PR adds the ability to control the capabilities granted to
extensions by the extension host via the new
`granted_extension_capabilities` setting.
This setting is a list of the capabilities granted to any extension
running in Zed.
The currently available capabilities are:
- `process:exec` - Grants extensions the ability to invoke commands
using
[`zed_extension_api::process::Command`](https://docs.rs/zed_extension_api/latest/zed_extension_api/process/struct.Command.html)
- `download_file` - Grants extensions the ability to download files
using
[`zed_extension_api::download_file`](https://docs.rs/zed_extension_api/latest/zed_extension_api/fn.download_file.html)
- `npm:install` - Grants extensions the ability to install npm packages
using
[`zed_extension_api::npm_install_package`](https://docs.rs/zed_extension_api/latest/zed_extension_api/fn.npm_install_package.html)
Each of these capabilities has parameters that can be used to customize
the permissions.
For instance, to only allow downloads from GitHub, the `download_file`
capability can specify an allowed `host`:
```json
[
{ "kind": "download_file", "host": "github.com", "path": ["**"] }
]
```
The same capability can also be granted multiple times with different
parameters to build up an allowlist:
```json
[
{ "kind": "download_file", "host": "github.com", "path": ["**"] },
{ "kind": "download_file", "host": "gitlab.com", "path": ["**"] }
]
```
When an extension is not granted a capability, the associated extension
APIs protected by that capability will fail.
For instance, trying to use `zed_extension_api::download_file` when the
`download_file` capability is not granted will result in an error that
will be surfaced by the extension:
```
Language server phpactor:
from extension "PHP" version 0.4.3: failed to download file: capability for download_file https://github.com/phpactor/phpactor/releases/download/2025.07.25.0/phpactor.phar is not granted by the extension host
```
Release Notes:
- Added a `granted_extension_capabilities` setting to control the
capabilities granted to extensions.
Closes#24412 and #19471
I tested both insertion and replacing with o3-mini and it failed with
the current prompt. With the updated prompt it does no longer return
`<document><rewrite_this>` or `{{REWRITTEN_CODE}}`
I have ensured the LLM Worker works with these prompt changes.
Release Notes:
- Improved prompting for the inline assistant
Closes #ISSUE
Adds a couple functions to the `SettingsStore`:
- `get_value_from_file`: Gets a value from a given settings file
(`Local`, `User`, etc) and if the value isn't found in the requested
file, walks the known settings files in the order in which they are
merged to find the settings value in lower precedence settings files
(i.e. if value not set anywhere will always return default value)
- `get_overrides_for_field`: Returns a list of settings files where a
given setting is set that have higher precedence than the passed in
file. e.g. passing in user will result in project settings files where
the value is set being returned.
Additionally changes the default for the `project_name` setting to
uphold the rules we are attempting to enforce on the settings, namely:
- All settings fields should be of the form `Option<T>`
- `None` (or `null` in JSON) should never be a meaningful value
Follow up PRs will handle implementing a function to write to an
arbitrary settings file, and passing through metadata to the above
functions to control how overrides are determined for more complicated
cases like `SaturatingBool` (`disable_ai`) and `ExtendingVec`
Release Notes:
- N/A *or* Added/Fixed/Improved ...
---------
Co-authored-by: Ben Kunkle <ben@zed.dev>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Co-authored-by: Anthony <anthony@zed.dev>
Closes https://github.com/zed-industries/zed/issues/39183
This PR adds UI improvements to clarify the concept of "default rules"
and how they separate from regular rules. This is mostly motivated by
the issue linked above, where it clarified that the star icon was
communicating a "favoriting" affordance, which is not correct with how
rules work in Zed. When you tag/attach a rule as default, it will always
be included in every prompt, together with the agent's system prompt and
project rules (if they exist).
Hopefully, this will make understanding better. Here's how it looks like
now?
https://github.com/user-attachments/assets/435d3af7-e8a6-4646-8f00-94a409bd5f42
Release Notes:
- Improve rules library UI to better communicate the concept of default
rules vs. regular rules.
Despite how great `cmd-d` as a keybinding is, that was not working as it
was conflicting with an editor keybinding:
https://github.com/user-attachments/assets/2ea8665b-7008-4f0a-9426-8d31d379ee1c
This PR changes it to `cmd-alt-z`, which is the best "remove/fix"-type
of keybinding I could find that doesn't conflict with anything else.
Ideally, we'd use either the D, N, or R letters for "deny", "no", and
"reject", but unfortunately, none of them are nicely available in this
context...
Release Notes:
- agent: Fix keybinding to deny running a command
