This PR introduces a new script for iterative development of prompt
overrides in Zed.
Just `script/prompts link` and your running Zed should start using
prompts from `zed/assets/prompts`. Use `script/prompts unlink` to undo.
You can also link with `script/prompts link --worktree` to store the
prompts to a `../zed_prompts` worktree that's a sibling of your repo, in
case you don't want to mess with your working copy. Just don't forget
about it!
Key changes:
- Add new `script/prompts` for managing prompt overrides
- Rename `prompt_templates_dir` to `prompt_overrides_dir` for clarity
- Update paths to use `~/.config/zed/prompt_overrides` instead of
`~/.config/zed/prompts/templates`
- Adjust `PromptBuilder` to use the new `prompt_overrides_dir` function
These changes simplify the process of customizing prompts and provide a
more intuitive naming convention for override-related functionality.
Release Notes:
- N/A
This PR makes it so staff members will be exempt from rate limiting by
the LLM service.
This is just a temporary measure until we can tweak the rate-limiting
heuristics.
Staff members are still subject to upstream LLM provider rate limits.
Release Notes:
- N/A
Copies rust files from extension_api/wit to the OUT_DIR to allow
including them from within the crate, which is supported by
rust-analyzer. This allows rust-analyzer to deal with the included
files. It doesn't currently support files outside the crate.
Release Notes:
- N/A
This makes sure that the `vertical_scroll_margin` doesn't leave the
cursor out of screen or somewhere it shouldn't go when it's higher than
the visible lines on screen.
So we cap it to `visible_line_count / 2`, similar to nvim:
5aa1a9532c/src/nvim/window.c (L6560)Fixes#15101
Release Notes:
- Fixed `ctrl-u`/`ctrl-d` in Vim mode not working correctly when
`vertical_scroll_margin` is set to a really high value.
Co-authored-by: Bennet <bennet@zed.dev>
When setting `"vertical_scroll_margin": 99` or other high values this
can lead to a panic that crashes Zed.
Release Notes:
- vim: Fixed a possible panic that could happen when using a very high
value for `vertical_scroll_margin` that exceeded the number of visible
lines on the screen.
Co-authored-by: Bennet <bennet@zed.dev>
This makes it at least scroll again, but it doesn't scroll down to the
last element yet. We haven't figured out why yet.
Release Notes:
- N/A
Co-authored-by: Bennet <bennet@zed.dev>
Co-authored-by: Antonio <antonio@zed.dev>
We had to resort to this "hack" to get it to work, since nothing else we
tried (changing the `Pane`, changing the `ConfigurationView`, changing
the `AssistantPanel`, ...) worked.
Release Notes:
- N/A
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Bennet <bennet@zed.dev>
When switching to function definitions in a new buffer the
`AutoscrollStrategy::Focused` being emitted to scroll to the found
location.
If a large value `vertical_scroll_margin` (e.g.: 99) is set, this leads
to an incorrectly calculated position and the new buffer opens in the
wrong place.
In `autoscroll_vertically()` there is a margin calculated to cap the
value of `vertical_scroll_margin` for certain AutoscrollStrategies. This
margin is being used in `AutoscrollStrategy::Fit` and
`AutoscrollStrategy::Newest` but was probably forgotten for
`AutoscrollStrategy::Focused`.
- Might fix [#15101](https://github.com/zed-industries/zed/issues/15101)
Release Notes:
- N/A
This implements #15412. Row-column parsing is changed into a regex to
support more complex patterns like the MSBuild diagnostics. Terminal
`word_regex` is also relaxed to match those suffixes.
Release Notes:
- N/A
This PR adds syntax highlighting support for `css`, `html`, `js`,
`json`, `sql`, `ts`, `yaml` and `yml` in `javascript`, `typescript` and
`tsx` languages where the contents of tagged template literals are now
highlighted.
This does not actually enable language features (like LSP support), it
only does syntax highlighting.
Before this change:
<img width="561" alt="image"
src="https://github.com/user-attachments/assets/74bace1b-5ce1-4b17-8a97-035bba152d9c">
After this change:
<img width="607" alt="image"
src="https://github.com/user-attachments/assets/f227145b-3f4a-4c27-b14f-7143bb19b4cf">
/cc @mrnugget
Release Notes:
- Added syntax highlighting for tagged template literals in
`javascript`, `typescript` and `tsx` languages for `css`, `html`, `js`,
`json`, `sql`, `ts`, `yaml` and `yml`.
([#15984](https://github.com/zed-industries/zed/issues/15984))
This PR changes how we ask users to draft up PRs and how release note
generation happens.
We no longer force the user to create the markdown URL link, but we do
ask them to use the `closes` [GitHub magic
word](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue)
to link the PR to an issue, so that the issue is closed automatically
when closing the PR.
As for the changelog release notes, we are no longer linking to the
issues, but the PR itself, which should contain the issue if a reader
wants to dive further back. This makes our output more consistent, as
every line will have a link, even if there is no issue associated, and
it removes the need for us to try to parse the issue url in the body to
try to correct mistakes in how they were forming Markdown urls - the PR
url is always returned in the request, which makes it easy. **Lastly,
it's just a lot less annoying to make the release notes.**
The new PR format will be:
```
Closes #ISSUE
Release Notes:
- Added/Fixed/Improved ...
```
The new script output format will be:
```
PR Title: theme: Use a non-transparent color for the fallback `title_bar.inactive_background`
Credit: ([#15709](https://github.com/zed-industries/zed/pull/15709); thanks [maxdeviant](https://github.com/maxdeviant))
Release Notes:
- linux: Changed the fallback color of `title_bar.inactive_background` to a non-transparent value.
--------------------------------------------------------------------------------
PR Title: Skip over folded regions when iterating over multibuffer chunks
Credit: ([#15646](https://github.com/zed-industries/zed/pull/15646); thanks [osiewicz](https://github.com/osiewicz))
Release Notes:
- Fixed poor performance when editing in the assistant panel after inserting large files using slash commands
--------------------------------------------------------------------------------
```
This still requires us to manually apply the credit line, but the line
is already fully formed, so this should still be faster than having to
manually create that line / fix any line where someone messed it up
(which was all the time). I would just automatically apply it to the
release notes, but sometimes we have multiple bullet points in a single
PR and no real structure is enforced, so I foresee doing anything
automatic breaking and needing manual adjustment.
Release Notes:
- N/A
[](https://renovatebot.com)
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [python](https://togithub.com/containerbase/python-prebuild) |
dependencies | patch | `3.12.4` -> `3.12.5` |
---
### Release Notes
<details>
<summary>containerbase/python-prebuild (python)</summary>
###
[`v3.12.5`](https://togithub.com/containerbase/python-prebuild/releases/tag/3.12.5)
[Compare
Source](https://togithub.com/containerbase/python-prebuild/compare/3.12.4...3.12.5)
##### Bug Fixes
- **deps:** update dependency python to v3.12.5
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOC4yMC4xIiwidXBkYXRlZEluVmVyIjoiMzguMjAuMSIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Version 0.5.7 doesn't have the `--database-url` command line flag, so
`script/bootstrap` didn't work.
Since we use `0.7` in collab (see
[here](73fb8277fc/crates/collab/Cargo.toml (L60)))
and sqlx 0.7.2 has the `--database-url` flag, we use that instead.
Release Notes:
- N/A
Co-authored-by: Bennet <bennet@zed.dev>
Fixes#15923
Release Notes:
- Assistant workflow steps can now be applied and reverted directly from
within the assistant panel.
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Antonio <antonio@zed.dev>
When Anthropic releases a new version of their models, Zed AI users
should always get access to the new version even when using an old
version of zed.
Co-Authored-By: Thorsten <thorsten@zed.dev>
Release Notes:
- N/A
Co-authored-by: Thorsten <thorsten@zed.dev>
This adds an error notification that pops up when the user has an
invalid keymap, similar to what we added for settings in #15905.
Release Notes:
- Added a popup that is displayed when the keymap is invalid
This PR polishes elements around setting up LLM providers on the
Assistant panel, including:
- [x] Adding banners for promoting Zed AI and to deal with the "No
provider set up" scenario
- [x] Tweaking the error popover whenever there's no API key added
- [ ] Making configuration panel scrollable
---
Release Notes:
- N/A
---------
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
Co-authored-by: Bennet Bo Fenner <53836821+bennetbo@users.noreply.github.com>
Co-authored-by: Marshall Bowers <1486634+maxdeviant@users.noreply.github.com>
This PR opens workflow step editors as preview tabs and closes them upon
exiting the step if they are still in preview mode and they weren't
already open before entering the step.
Making this work was tricky, because we often edit the buffer as part of
displaying the workflow step suggestions to create empty lines where we
can generate. We undo these edits if the transformation is not applied,
but they were causing the preview to be dismissed.
After trying a few approaches, I decided to give workspace `Item`s a
`preserve_preview` method that defaults to false. When the workspace
sees an edit event for the item, it checks if the item wants to preserve
its preview. For buffers, after editing, you can call `refresh_preview`,
which sets a preview version to the current version of the buffer. Any
edits after this version will cause preview to not be preserved.
One final issue is with async auto-indent. To ensure these async edits
don't dismiss the preview, I automatically refresh the preview version
if preview was preserved prior to performing the auto-indent. The
assumption is that these are edits created by other edits, and if we
didn't want to dismiss the preview with the originating edits, then the
auto-indent edits shouldn't dismiss it either.
Release Notes:
- N/A
---------
Co-authored-by: Jason <jason@zed.dev>
This fixes an issue on NixOS where Zed's proto crate fails to build.
Cargo expects to find protoc in the Cargo registry, but due to the
distro's non-standard filesystem this expectation is invalid.
Release Notes:
- N/A
[](https://renovatebot.com)
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
|
[actions/upload-artifact](https://togithub.com/actions/upload-artifact)
| action | digest | `0b2256b` -> `834a144` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOC4yMC4xIiwidXBkYXRlZEluVmVyIjoiMzguMjAuMSIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR adjusts how we display the "mode" collab is running in on the
root endpoint.
It's minor, but it does make things a bit cleaner.
Release Notes:
- N/A
This prevents users from accessing other models, such as OpenAI's GPT-4
or Google's Gemini-Pro.
Staff members can still access all models.
Co-authored-by: Thorsten <thorsten@zed.dev>
Release Notes:
- N/A
---------
Co-authored-by: Thorsten <thorsten@zed.dev>
Release Notes:
- Fixed a (potential) small error in erf estimation. Technically, the
error is negligible.
I am not sure where the current calculation for erf come from and if it
is intended or a simple mistake. However it looks slightly different
from the official calculation, notably
[this](https://en.wikipedia.org/wiki/Error_function#Approximation_with_elementary_functions)
from Wikipedia.
I will add a comment if it is intended.
This will help us as we hit issues with the /workflow and step
resolution. We can override the baked-in prompts and make tweaks, then
import our refinements back into the source tree when we're ready.
Release Notes:
- N/A
I need this to refine our prompts on the fly as I work.
Release Notes:
- Templates for prompts driving inline transformation in editors and the
terminal can now be overridden in the `~/.config/zed/prompts/templates`
directory. This is an advanced feature, and prevents you from getting
upstream changes. It's intended for use by Zed developers.
This PR removes the unused `ignore_checksum_mismatch` parameter to
`run_database_migrations`.
We were always passing `false`, which meant the behavior didn't need to
be parameterized.
Release Notes:
- N/A
This PR puts the initial infrastructure for the LLM service's database
in place.
The LLM service will be using a separate Postgres database, with its own
set of migrations.
Currently we only connect to the database in development, as we don't
yet have the database setup for the staging/production environments.
Release Notes:
- N/A
We achieved this by allowing block decorations to have a height of `0`
and superimposing the border on top of the line, as opposed to carving
out space below it.
Release Notes:
- N/A
---------
Co-authored-by: Jason <jason@zed.dev>
This PR updates the LLM service to authorize access to language model
providers based on the requester's country.
We detect the country using Cloudflare's
[`CF-IPCountry`](https://developers.cloudflare.com/fundamentals/reference/http-request-headers/#cf-ipcountry)
header.
The country code is then checked against the list of supported countries
for the given LLM provider. Countries that are not supported will
receive an `HTTP 451: Unavailable For Legal Reasons` response.
Release Notes:
- N/A
- [x] OpenAI
- [ ] ~Google~ Moved into a separate branch at:
https://github.com/zed-industries/zed/tree/tool-calls-in-google-ai I've
ran into issues with having the API digest our schema without tripping
over itself - the function call parameters are malformed and whatnot. We
can resume from that branch if needed.
- [x] Ollama
- [x] Cloud
- [ ] ~Copilot Chat (?)~
Release Notes:
- Added tool calling capabilities to OpenAI and Ollama models.
Release Notes:
- Improved streaming git diffs to be less jumpy during inline assistant
generation
---------
Co-authored-by: Antonio Scandurra <antonio@zed.dev>
This PR refactors the language server loading in the Ruff extension to
mirror our other extensions.
Also fixed an issue where the cached binary path was not being
respected.
Release Notes:
- N/A
Hello, this pull request adds support for specifying and using the
"binary" settings for Rubocop and Solargraph LSPs. AFAIK, Ruby LSP does
not require the bundler context but that could be added later easily.
In Ruby world, like in Node.js world, almost all
projects rely on project specific packages (gems) and their versions.
Solargraph and Rubocop gems are usually installed as project
dependencies. Attempting to use global installation of them fail in most
cases due to incompatible or missing dependencies (gems).
To avoid that, Ruby engineers have the `bundler`
gem that provides the `exec` command. This command executes the given
command in the context of the bundle.
This pull request adds support for pulling the `binary` settings to use
them in starting both LSPs. For instance, to start the Solargraph gem in
the context of the bundler, the end user must configure the binary
settings in the folder-specific settings file like so:
```json
{
"lsp": {
"solargraph": {
"binary": {
"path": "/Users/vslobodin/Development/festivatica/bin/rubocop"
}
}
}
}
```
The `path` key must be an absolute path to the `binstub` of the
`solargraph` gem. The same applies to the "rubocop" gem. Side note but
it would be awesome to use Zed specific environment variables to make
this a bit easier. For instance, we could use the `ZED_WORKTREE_ROOT`
environment variable:
```json
{
"lsp": {
"solargraph": {
"binary": {
"path": "${ZED_WORKTREE_ROOT}/bin/rubocop"
}
}
}
}
```
But this is out of the scope of this pull request. The code is a bit
messy and repeatable in some places, I am happy to improve it here or
later.
References:
- https://bundler.io/v2.4/man/bundle-exec.1.html
- https://solargraph.org/guides/troubleshooting
- https://bundler.io/v2.5/man/bundle-binstubs.1.html
This pull request is based on these two pull requests:
- https://github.com/zed-industries/zed/pull/14655
- https://github.com/zed-industries/zed/issues/15001
Closes https://github.com/zed-industries/zed/issues/5109.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Adds a "Use Supermaven" and "Use Copilot" menu item to the signed out
menus for each of the autocomplete providers to make it easier to switch
between them without having to update your local settings json.
<img width="222" alt="image"
src="https://github.com/user-attachments/assets/6f760f4e-5527-4971-bdaf-383bc99649bd">
Release Notes:
- Added menu items to quickly switch between Supermaven and Copilot
inline completions when the provider is not configured
We changed the following for the model selector:
- Fixed displaying checkmarks for selected models when using models with
the same name from different providers
- We now show the icon for the active model instead of displaying the
provider name in the trigger of the model selector
- Only display the footer when the language models feature flag is zed,
so that we don't release the hint for Zed Pro to preview tomorrow
<img width="253" alt="image"
src="https://github.com/user-attachments/assets/f95ccfb6-c0cf-43d4-9637-e2823100a427">
Release Notes:
- N/A
---------
Co-authored-by: Thorsten <thorsten@zed.dev>
Adds support for [Goto
Declaration](https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#textDocument_declaration)
LSP command.
I am particularly interested in [this for Rust
projects](https://rust-analyzer.github.io/manual.html#go-to-declaration),
to be able to navigate to the place where a trait method is declared,
coming from a trait method implementation.
I noticed this was something I could do in VSCode before, but was
somehow missing is Zed. Thanks to the already existing infrastructure
for Goto Definition, I just followed and copy-paste-adapted it for Goto
Declaration.
As a bonus, I added `ctrl-F12` and `alt-ctrl-F12` as default macOS
keybindings for `GoToDeclaration` and `GoToDeclarationSplit`,
respectively. They are not keybindings from another editor, but I
figured they made sense to be grouped along with the other *F12
commands.
### Release Notes:
- Added "Go to declaration" editor action.
- vim: Breaking change to keybindings after introduction of the `Go to
declaration` editor action. The new keybindings are the following (and
can be found [here](https://zed.dev/docs/vim), alongside the other key
bindings):
- `g d` - Go to definition
- `g D` - Go to declaration
- `g y` - Go to type definition
- `g I` - Go to implementation
https://github.com/user-attachments/assets/ee5c10a8-94f0-4e50-afbb-6f71db540c1b
---------
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
Hi, this pull request adds support for RBS files for the Ruby language.
[RBS](https://github.com/ruby/rbs) is a language to describe the
structure of Ruby programs.
This pull request:
- adds a new grammar to the Ruby extension for RBS
https://github.com/joker1007/tree-sitter-rbs
- configures the Ruby extension to use the added grammar.
Release Notes:
- N/A
This PR introduces a separate backend service for making LLM calls.
It exposes an HTTP interface that can be called by Zed clients. To call
these endpoints, the client must provide a `Bearer` token. These tokens
are issued/refreshed by the collab service over RPC.
We're adding this in a backwards-compatible way. Right now the access
tokens can only be minted for Zed staff, and calling this separate LLM
service is behind the `llm-service` feature flag (which is not
automatically enabled for Zed staff).
Release Notes:
- N/A
---------
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
This PR makes it so any Stripe events we receive that occurred over an
hour ago are marked as processed.
We don't want to process an old event long after it occurred and
potentially overwrite more recent updates.
This also makes running collab locally a bit nicer, as we won't be
getting errors for a bunch of older events that will never get processed
successfully.
The period after time after which we consider an event "stale" can be
modified, as needed.
Release Notes:
- N/A
This is just a refactor that we're landing ahead of any functional
changes to make sure we haven't broken anything.
Release Notes:
- N/A
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Jason <jason@zed.dev>
This PR changes how we report the `geoip_country_code` in the tracing
spans.
I wasn't seeing it come through in the logs, and I think it was because
we didn't declare the field on the initial span.
Release Notes:
- N/A
This adds two possible notices to the assistant panel:
- Shows notice if currently selected provider is not configured
- Shows notice if user is signed-out and (does not have provider OR
provider is zed.dev) and tells user to sign in
Design needs to be tweaked. cc @iamnbutler
Release Notes:
- N/A
Co-authored-by: Bennet <bennet@zed.dev>
Fixes a bug introduced in #15615, where prompts could not be edited in
the prompt library.
This PR fixes the behavior by only preventing users to edit built-in
prompts.
Release Notes:
- N/A
Release Notes:
- Added `ctrl-alt-enter` keybinding for `repl::RunInPlace`
(`ctrl-option-enter` on MacOS). Keeps your screen position and cursor in
place when running any block.
This PR changes the fallback color for the
`title_bar.inactive_background` theme property so that the title bar
doesn't just disappear when a theme doesn't have a value set.
You're welcome, @naomieow.
Release Notes:
- linux: Changed the fallback color of `title_bar.inactive_background`
to a non-transparent value.
This PR makes it so we normalize the line endings for prompts to LFs
(`\n`) when we load a prompt from the library.
In some cases, prompts could end up with CRLF (`\r\n`) line endings.
When these prompts were used with the `/prompt` slash command and
summarily run, the prompt text would be converted into a rope, causing
the line endings to be normalized to LFs.
However, this would happen _after_ the ranges for the
`SlashCommandOutputSection`s were computed based on the text that still
contained the CRLFs. This would then cause these ranges to be invalid
for the text with the normalized endings, resulting in a panic when
converting them to anchors.
Fixes https://github.com/zed-industries/zed/issues/15652.
Release Notes:
- N/A
Co-authored-by: Max <max@zed.dev>
This PR fixes the links to the "Backend dependencies" section from the
local collaboration docs.
We now provide links to the section in the platform-specific development
docs.
Release Notes:
- N/A
This PR removes some `unwrap`s while loading the built-in step
resolution prompt.
While these `unwrap`s are safe today, they are relying on some implicit
contracts that might change in the future. We're using this in a context
where it's easy to propagate an error upwards, so we may as well avoid
the `unwrap`s entirely and use a `Result`.
Release Notes:
- N/A
This PR moves the `copilot_chat_config_path` out of `paths` and into
`copilot` with the rest of the Copilot code.
Since this doesn't actually return a Zed path, it doesn't belong in
`paths`.
Release Notes:
- N/A
This commit weaves through new APIs for language::BufferChunks, multi_buffer::MultiBufferChunks and inlay_map::InlayChunks that allow seeking with an upper-bound. This allows us to omit doing syntax highligting and looking up diagnostics for folded ranges. This in turn directly improves performance of assistant panel with large contexts.
Release Notes:
- Fixed poor performance when editing in the assistant panel after
inserting large files using slash commands
---------
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
TODOs for follow-up:
- [ ] When opening panel: nudge user to sign in if they're not signed-in
and have no provider configured (or if they're not signed-in and have
Zed AI configured)
- [ ] Configuration page is not scrollable
- [ ] Design tweaks
Current status:
https://github.com/user-attachments/assets/d26d65ea-43e8-481b-81a3-b3cba01704a8
Release Notes:
- N/A
This is an intermediate fix for the focus problems in the assistant
panel. Intermediate because I'm going to shred the whole
ConfigurationView now and replace the tabs inside with a list.
Release Notes:
- N/A
This PR updates the `LanguageModel` trait with a new method for denoting
the availability of a model.
Right now we have two variants:
- `Public` for models that have no additional restrictions (other than
their respective setup/authentication requirements)
- `RequiresPlan` for models that require a specific Zed plan
Release Notes:
- N/A
This PR updates the extension API to make the `worktree` argument to
`run_slash_command` optional.
We may not always have a worktree, and not all slash commands need them,
so by making it optional we can allow individual slash commands to
decide what to do when there is no worktree.
Release Notes:
- N/A
This PR fixes an issue where slash commands were not able to run when
Zed did not have any worktrees opened.
This requirement was only necessary for slash commands originating from
extensions, and we can enforce the presence of a worktree just for
those:
<img width="378" alt="Screenshot 2024-08-01 at 5 01 58 PM"
src="https://github.com/user-attachments/assets/38bea947-e33b-4c64-853c-c1f36c63d779">
Release Notes:
- N/A
- The secrets portal is only used if the application is sandboxed
without access to the org.freedesktop.secrets on the host but as zed is
not really working correctly if sandboxed as is, it is better to
completely omit that part
- The org.freedestkop.secrets is not a portal but a spec file that is
implemented by both gnome in gnome-keyring, kde in kwallet but also by
other password managers like keepassxc and it is a requirement for a
"correctly" set up linux desktop so just remove that wrongly documented
bit
Release Notes:
- N/A
After the changes in #15536, block decorations need to be given an
explicit height if their content doesn't consume height on its own. We
missed that inline transformation deletion decorations didn't do this,
creating weird results. This fixes the issue and prevents block
decorations from ever having a zero height. That helps avoid major
weirdness, but this still a bit of a gotcha.
We need to back port this to Preview Channel (0.147.x)
Release Notes:
- N/A
---------
Co-authored-by: Antonio <antonio@zed.dev>
This PR fixes an issue where creating a new context as a guest would
insert multiple default prompts: one for the host and one for the guest.
When creating a new context as a guest while collaborating, we should
only use the host's default prompt.
Release Notes:
- N/A
This PR fixes the `.env.toml` paths, since we inadvertently broke them
in https://github.com/zed-industries/zed/pull/15557.
There's likely a better way we can do this, but I wanted to restore the
previous behavior, for now.
Release Notes:
- N/A
This PR renames the links to the `zed.dev/settings` page to the
`zed.dev/account`.
Some of these spots will likely link out to a marketing page later.
Release Notes:
- N/A
This PR removes the primary/secondary distinction for
`CachedLspAdapter`s.
After #15624 we weren't relying on the `is_primary` field anywhere, so
we can remove it.
Release Notes:
- N/A
This adds a button to the `Configuration` page for providers so it's
easy to start a new context _with the given provider_ selected.
Obviously not the most beautiful form this button can have, but works!
cc @iamnbutler
Release Notes:
- N/A
Co-authored-by: Bennet <bennet@zed.dev>
This PR updates how we determine the "primary" language server for a
buffer to make it respect the order specified by the `language_servers`
setting.
Previously we were relying on the language servers to be registered in
the right order in order to select the primary one effectively.
However, in my testing I observed some cases where a native language
server (e.g., `tailwindcss-language-server`) could end up first in the
list of language servers despite not being first in the
`language_servers` setting.
While this wasn't a problem for the Tailwind or ESLint language servers
on account of them being defined natively with the designation of
"secondary" language servers, this could cause problems with
extension-based language servers.
To remedy this, every time we start up language servers we reorder the
list of language servers for a given language to reflect the order in
the `language_servers` setting. This ordering then allows us to treat
the first language server in the list as the "primary" one.
Related issues:
- https://github.com/zed-industries/zed/issues/15023
- https://github.com/zed-industries/zed/issues/15279
Release Notes:
- The ordering of language servers will now respect the order in the
`language_servers` setting.
- The first language server in this list will be used as the primary
language server.
Small bug that snuck in with #15490. When closing the configuration tab
explicitly and then activating the assistant tab again, it wouldn't show
the configuration page.
Release Notes:
- N/A
Co-authored-by: Bennet <bennet@zed.dev>
We were reporting file count as worktree entry count, which led to us
missing some of the entries in /file command completion.
/cc @bennetbo
The other components that used `PathMatchCandidateSet` are
`/diagnostics` and file finder. File finder is unaffected, as it used
`Candidates::Files` - thus previously reported count was correct for it;
`/diagnostics` were using `::Entries` as well, so it could miss entries
just like `/files`.
Release Notes:
- Fixed /file and /diagnostics slash commands omitting entries in it's
completions menu.
Built-in prompts can still be removed from the default prompt, but they
can't be edited and are automatically updated with new Zed releases.
Release Notes:
- N/A
---------
Co-authored-by: Antonio <antonio@zed.dev>
- [x] bug: setting a key doesn't update anything
- [x] show high-level text on configuration page to explain what it is
- [x] show "everything okay!" status when credentials are set
- [x] maybe: add "verify" button to check credentials
- [x] open configuration page when opening panel for first time and
nothing is configured
- [x] BUG: need to fix empty assistant panel if provider is `zed.dev`
but not logged in
Co-Authored-By: Thorsten <thorsten@zed.dev>
Release Notes:
- N/A
---------
Co-authored-by: Thorsten <thorsten@zed.dev>
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
This commit gives tab button renderers control over the condition in
which they should be displayed. Previously we displayed tab buttons only
when the pane was focused. Now tab renderers can return an Option of
AnyElement, which in turn makes it possible for them to control when and
how they're rendered. Pane and Terminal handlers still check for self
focus condition and Assistant Panel does not.
Release Notes:
- N/A
This PR fixes Copilot chat authentication on Windows. GitHub Copilot
chat in assistant panel uses auth token file generated by [copilot
language server](https://github.com/zed-industries/copilot). The path to
authentication token file is platform dependent. On Windows, it happens
to be `~\AppData\Local\github-copilot\hosts.json`.
Release Notes:
- Fixed Copilot chat sign in issue on Windows ([#4673](https://github.com/zed-industries/zed/issues/4673))
[](https://renovatebot.com)
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [image](https://togithub.com/image-rs/image) | dependencies | patch |
`0.25.1` -> `0.25.2` |
| [image](https://togithub.com/image-rs/image) | workspace.dependencies
| patch | `0.25.1` -> `0.25.2` |
---
### Release Notes
<details>
<summary>image-rs/image (image)</summary>
###
[`v0.25.2`](https://togithub.com/image-rs/image/blob/HEAD/CHANGES.md#Version-0252)
[Compare
Source](https://togithub.com/image-rs/image/compare/v0.25.1...v0.25.2)
Features:
- Added the HDR encoder to supported formats in generic write methods
with the
`hdr` feature enabled. Supports 32-bit float RGB color only, for now.
- When cloning `ImageBuffer`, `DynamicImage` and `Frame` the existing
buffer
will now be reused if possible.
- Added `image::ImageReader` as an alias.
- Implement `ImageEncoder` for `HdrEncoder`.
Structural changes
- Switch from `byteorder` to `byteorder-lite`, consolidating some
casting
unsafety to `bytemuck`.
- Many methods on `DynamicImage` and buffers gained `#[must_use]`
indications.
Bug fixes:
- Removed test data included in the crate archive.
- The WebP animation decoder stops when reaching the indicate frame
count.
- Fixed bugs in the `bmp` decoder.
- Format support gated on the `exr` feature now compiles in isolation.
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about these
updates again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzNy40NDAuNyIsInVwZGF0ZWRJblZlciI6IjM3LjQ0MC43IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
[](https://renovatebot.com)
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [etagere](https://togithub.com/nical/etagere) | dependencies | patch |
`0.2.8` -> `0.2.13` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzNy40NDAuNyIsInVwZGF0ZWRJblZlciI6IjM3LjQ0MC43IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR increases the frequency at which we poll for Stripe events.
This decreases the amount of time we have to wait in order for changes
in Stripe to be reflected in our system.
We now poll for events every 5 seconds, down from every 5 minutes.
In order to avoid needlessly over-fetching data from Stripe, we put a
cap on the number of pages consisting entirely of already-processed
events that we can see before stopping. This is set to 4, so once we've
seen 4 pages of processed events (400 events in total), we'll stop
fetching subsequent pages.
Release Notes:
- N/A
This PR ensures that the toolbar within the editor and the assistant
panel have the same height. I also pushed in some other tiny design
(spacing, really) tweaks. There's still a mismatch between the editor
toolbar and the assistant panel's history tab, but I'll try to tackle
this separately.
---
Release Notes:
- N/A
[](https://renovatebot.com)
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [emojis](https://togithub.com/rossmacarthur/emojis) |
workspace.dependencies | patch | `0.6.1` -> `0.6.3` |
---
### Release Notes
<details>
<summary>rossmacarthur/emojis (emojis)</summary>
###
[`v0.6.3`](https://togithub.com/rossmacarthur/emojis/compare/0.6.2...0.6.3)
[Compare
Source](https://togithub.com/rossmacarthur/emojis/compare/0.6.2...0.6.3)
###
[`v0.6.2`](https://togithub.com/rossmacarthur/emojis/compare/0.6.1...0.6.2)
[Compare
Source](https://togithub.com/rossmacarthur/emojis/compare/0.6.1...0.6.2)
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzNy40NDAuNyIsInVwZGF0ZWRJblZlciI6IjM3LjQ0MC43IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
English is hard.
In US English the forms of "cancel" are as follows:
- `cancel`
- `cancels`
- `canceling`
- `canceled`
- `cancellation`
Note that `cancellation` _does_ use the double `l`, which all the rest
of the forms do not.
Release Notes:
- N/A
[](https://renovatebot.com)
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
|
[embed-resource](https://togithub.com/nabijaczleweli/rust-embed-resource)
| build-dependencies | patch | `2.4.2` -> `2.4.3` |
---
### Release Notes
<details>
<summary>nabijaczleweli/rust-embed-resource (embed-resource)</summary>
###
[`v2.4.3`](https://togithub.com/nabijaczleweli/rust-embed-resource/compare/v2.4.2...v2.4.3)
[Compare
Source](https://togithub.com/nabijaczleweli/rust-embed-resource/compare/v2.4.2...v2.4.3)
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzNy40NDAuNyIsInVwZGF0ZWRJblZlciI6IjM3LjQ0MC43IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
[](https://renovatebot.com)
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [core-graphics](https://togithub.com/servo/core-foundation-rs) |
dependencies | patch | `0.23.1` -> `0.23.2` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzNy40NDAuNyIsInVwZGF0ZWRJblZlciI6IjM3LjQ0MC43IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR updates collab to pick the `zed.dev` URL based on the current
environment rather than always using `https://zed.dev`.
This means that when developing locally we'll use
`http://localhost:3000` to be taken to the locally-running version of
`zed.dev`.
Release Notes:
- N/A
[](https://renovatebot.com)
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [async-task](https://togithub.com/smol-rs/async-task) | dependencies |
patch | `4.7.0` -> `4.7.1` |
---
### Release Notes
<details>
<summary>smol-rs/async-task (async-task)</summary>
###
[`v4.7.1`](https://togithub.com/smol-rs/async-task/blob/HEAD/CHANGELOG.md#Version-471)
[Compare
Source](https://togithub.com/smol-rs/async-task/compare/v4.7.0...v4.7.1)
- Improve the panic message for when a task is polled after completion.
([#​73](https://togithub.com/smol-rs/async-task/issues/73))
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzNy40NDAuNyIsInVwZGF0ZWRJblZlciI6IjM3LjQ0MC43IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This UI change is behind a `ZedPro` feature flag so that it won't be
visible until we're ready to launch that service.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Marshall <marshall@zed.dev>
This PR updates the rate limits to adapt based on the user's current
plan.
For the free plan rate limits I just took one-tenth of the existing rate
limits (which are now the Pro limits). We can adjust, as needed.
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
This PR renames and added a new pane event to indicate the difference
between `removing` and `removed` event. This change is needed for the
debugger implementation, if you close a pane we have to send a
`terminateThread` request to the adapter because it's not supported to
reopen a pane. So when the pane is removing we have to know what thread
it is what is stored on the panel itself, so we have to be able to get
this information before the pane is actually removed.
So my idea how to fix this was by adding a new event called
`RemovedItem` which is a rename of `RemoveItem` which also makes a bit
more sense because the item is removed at that point. And seeing the
name `RemoveItem` does not really say that it's removed, more like we
are removing the item.
/cc @mikayla-maki
Release Notes:
- N/A
There was/is some race condition that gets triggered only with the
zed.dev provider when opening the provider that would cause a
double-borrow on workspace.
This PR fixes the issue by cloning the workspace weakly. Turns out we
can go very far with just the weak reference.
We're still a bit unsure why exactly the race condition happened, since
it's hard to reproduce, but we're working on configuration
view/management in #15490 anyway.
Release Notes:
- N/A
Co-authored-by: Bennet <bennet@zed.dev>
This is the revised version of #15527.
We also added new events to notify subscribers when new providers are
added or removed.
Co-Authored-by: Thorsten <thorsten@zed.dev>
Release Notes:
- N/A
---------
Co-authored-by: Thorsten <thorsten@zed.dev>
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
Something seems to have broke on `main` in last few days.
Bug was reproducible like this:
- Open assistant panel
- Choose provider that wasn't authenticated
- See auth prompt
- Close the tab (!) in the assistant panel
- Reactivate the assistant panel
- Bug: panel is blank!
This fixes the bug by consolidating the behavior of checking credentials
and showing auth prompt.
Release Notes:
- N/A
With zed.dev provider becoming more popular, it helps alleviate
confusion when showing not only the model name but also the provider
name.
Release Notes:
- N/A
This fixes an issue where the window's hovered state would be incorrect,
causing the cursor not to update because it would think the window
wasn't hovered ([relevant
check](a03beeeb5b/crates/gpui/src/window.rs (L3016-L3017))).
The code here doesn't really seem to make sense, since there's already
the `XinputEnter` and `XinputLeave` events that indicate mouse focus
state on the window. The properties change event wouldn't necessarily
indicate when mouse focus changes.
Thanks @Emc2356 for reporting this on the Discord and helping figure out
the issue!
Release Notes:
- Linux: Fixed the cursor sometimes not changing on X11
This PR adds a new `GET /billing/subscriptions` endpoint to collab for
retrieving the subscriptions to display on the account settings page.
Release Notes:
- N/A
This PR makes it so we always construct a real HTTP client in the
`ExtensionBuilder`.
This used to be the case, but was inadvertently changed in
https://github.com/zed-industries/zed/pull/15470.
Release Notes:
- N/A
This PR updates the user menu to show the user's current plan.
Also adds a new RPC message to send this information down to the client
when Zed starts.
This is behind a feature flag.
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
- Disable Terminal ctrl-a (conflicts with readline).
- Standardize modifier order to use ctrl-shift instead of shift-ctrl to match existing keys.
- Move ctrl-shift-c (collab) to \!Terminal context (fix flickering in terminal right click menu).
- Consolidate two Terminal blocks in linux keybind
This PR reworks how we process Stripe events for reconciliation
purposes.
The previous approach in #15480 turns out to not be workable, on account
of the Stripe event IDs not being strictly in order. This meant that we
couldn't reliably compare two arbitrary event IDs and determine which
one was more recent.
This new approach leans on the guidance that Stripe provides for
webhooks events:
> Webhook endpoints might occasionally receive the same event more than
once. You can guard against duplicated event receipts by logging the
[event IDs](https://docs.stripe.com/api/events/object#event_object-id)
you’ve processed, and then not processing already-logged events.
>
> https://docs.stripe.com/webhooks#handle-duplicate-events
We now record processed Stripe events in the `processed_stripe_events`
table and use this to filter out events that have already been
processed, so we do not process them again.
When retrieving events from the Stripe events API we now buffer the
unprocessed events so that we can sort them by their `created` timestamp
and process them in (roughly) the order they occurred.
Release Notes:
- N/A
Release Notes:
- N/A
Currently, the `img` element provided by GPUI only supports FilePath or
URL, but in actual applications we need to let `img` load an image
embedded in Assets.
The `svg` element can currently support this, but `img` cannot.
For example:
We have such an Assets directory:
```
assets
|- icons
|- images
|--- foo.png
```
```rs
// If give a path, considered an Asset
img("images/foo.png");
// If give a URI, considered a Remote image
img("https://foo.bar/images/foo.png");
// If give a PathBuf, considered a Local file
img(PathBuf::from("path/to/foo.png"));
```
## Example test
```
cargo run -p gpui --example image
```
<img width="827" alt="image"
src="https://github.com/user-attachments/assets/e45dcf7f-4626-4fb0-aca9-9b6e1045a952">
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
We also eliminate the `completion` crate and moved its logic into
`LanguageModelRegistry`.
Release Notes:
- N/A
---------
Co-authored-by: Nathan <nathan@zed.dev>
This PR improves our Stripe event handling by keeping track of the last
event we've seen for each record.
The `billing_customers` and `billing_subscriptions` tables both have a
new `last_stripe_event_id` column. When we apply an event to one of
these records, we store the event ID that was applied.
Then, when we are going through events we can ignore any event that has
an ID that came before the `last_stripe_event_id` (based on the
lexicographical ordering of the IDs).
Release Notes:
- N/A
This simplifies `PathWithPosition` by making the common use case
concrete and removing the manual, incomplete Windows path parsing.
Windows paths also don't get '/'s replaced by '\\'s anymore to limit the
responsibility of the code to just parsing out the suffix and creating
`PathBuf` from the rest. `Path::file_name()` is now used to extract the
filename and potential suffix instead of manual parsing from the full
input. This way e.g. Windows paths that begin with a drive letter are
handled correctly without platform-specific hacks.
Release Notes:
- N/A
Previously, the following lead to a bug:
1. Set OpenAI key
2. Switch to Anthropic
3. Restart Zed
4. Switch provider to OpenAI -> get prompted for authentication prompt
With this change, you won't get prompted for the OpenAI key again.
Release Notes:
- N/A
Co-authored-by: Bennet <bennet@zed.dev>
Additionally, I've generalized the implementation of tab switcher so
that - instead of explicitly listing panels it supports (at the time of
writing it was just the terminal panel and nothing else), it now relies
on Panel::pane trait method. As long as that's implemented, you get a
tab switcher support for free.
Release Notes:
- Added support for tab switcher in Assistant panel.
This adds the optional `PRESERVED_KEYS` constant to the `Settings`
trait,
which allows users of the trait to specify which keys should be written
to
the settings file, even if their current value matches the default
value.
That's useful for tagged settings that have, for example, a `"version"`
field
that should always be present in the user settings file, so we can then
reparse
the user settings based on the version.
Co-Authored-By: Thorsten <thorsten@zed.dev>
Release Notes:
- N/A
---------
Co-authored-by: Thorsten <thorsten@zed.dev>
# Summary
This commit implements Github Copilot Chat support within the existing
Assistant panel/framework. It required a little bit of trickery and
internal API modification, as Copilot doesn't use the same
authentication-style as all of the existing providers, opting to use
OAuth and a short lived API key instead of a straight API key. All
existing Assistant features should work.
Release Notes:
- Added Github Copilot Chat support
([#4673](https://github.com/zed-industries/zed/issues/4673)).
## Screenshots
<img width="1552" alt="A screenshot showing a conversation between a
user and Github Copilot Chat within the Zed editor."
src="https://github.com/user-attachments/assets/73eaf6a2-792b-4c40-a7fe-f763bd6417d7">
---------
Co-authored-by: Bennet Bo Fenner <bennet@zed.dev>
This PR lays the initial groundwork for using the Stripe events API to
reconcile the data in our system with what's in Stripe.
We're using the events API over webhooks so that we don't need to stand
up the associated infrastructure needed to handle webhooks effectively
(namely an asynchronous job queue).
Since we haven't configured the Stripe API keys yet, we won't actually
spawn the reconciliation background task yet, so this is currently a
no-op.
Release Notes:
- N/A
This PR adds a new `billing_customers` table to hold the billing
customers.
Previously we were storing both the `stripe_customer_id` and
`stripe_subscription_id` in the `billable_subscriptions` table. However,
this creates problems when we need to correlate subscription events back
to the subscription record, as we don't know the user that the Stripe
event corresponds to.
By moving the `stripe_customer_id` to a separate table we can create the
Stripe customer earlier in the flow—before we create the Stripe Checkout
session—and associate that customer with a user. This way when we
receive events down the line we can use the Stripe customer ID to
correlate it back to the user.
We're doing some destructive actions to the `billing_subscriptions`
table, but this is fine, as we haven't started using them yet.
Release Notes:
- N/A
This PR adds a new `POST /billing/subscriptions/manage` endpoint that
can be used to manage a billing subscription.
The endpoint accepts a `github_user_id` to identify the user, as well as
an optional `subscription_id` for managing a specific subscription. If
`subscription_id` is not provided, it try and use the active
subscription, if there is only one.
Right now the endpoint only supports cancelling an active subscription.
This is done by passing `"intent": "cancel"` in the request body.
The endpoint will return the URL to a Stripe customer portal session,
which the caller can redirect the user to.
Here's an example of how to call it:
```sh
curl -X POST "http://localhost:8080/billing/subscriptions/manage" \
-H "Authorization: <ADMIN_TOKEN>" \
-H "Content-Type: application/json" \
-d '{"github_user_id": 12345, "intent": "cancel"}'
```
Release Notes:
- N/A
This PR adds a new `POST /billing/subscriptions` endpoint that can be
used to initiate a billing subscription.
The endpoint will use the provided `github_user_id` to look up a user,
generate a Stripe Checkout session, and then return the URL.
The caller would then redirect the user to the URL to initiate the
checkout flow.
Here's an example of how to call it:
```sh
curl -X POST "http://localhost:8080/billing/subscriptions" \
-H "Authorization: <ADMIN_TOKEN>" \
-H "Content-Type: application/json" \
-d '{"github_user_id": 12345}'
```
Release Notes:
- N/A
This change fixes a bug when a block is focused but offscreen.
Previously, we used the last row, but this caused a spurious block to be
rendered when scrolled to the end of the file. With this change we
always render off-screen blocks below the editor's clipping box.
Release Notes:
- Fixed a bug that caused the inline assistant to be displayed twice in
certain circumstances.
Co-authored-by: Nathan <nathan@zed.dev>
This PR adds a new `billing_subscriptions` table to the database, as
well as some accompanying models/queries.
In this table we store a minimal amount of data from Stripe:
- The Stripe customer ID
- The Stripe subscription ID
- The status of the Stripe subscription
This should be enough for interactions with the Stripe API (e.g., to
[create a customer portal
session](https://docs.stripe.com/api/customer_portal/sessions/create)),
as well as determine whether a subscription is active (based on the
`status`).
Release Notes:
- N/A
Fixes#15426.
The `./` was implicitly assumed to be there by the prompt, so we'd end
up with `././foobar` when typing in an explicit `./`.
This fixes the issue by stripping `./` from the query, like we also
strip `/`.
Release Notes:
- Fixed paths starting with `./` breaking the new-path file picker when
the system prompts are disabled.
([#15426](https://github.com/zed-industries/zed/issues/15426)).
This PR removes the feature flag for the terminal inline assistant,
making it available to everyone.
Release Notes:
- Use Ctrl+Enter to summon the inline assistant in the terminal, which
let's you generate terminal commands based on your description
([demo](https://twitter.com/thorstenball/status/1814241447383605329))
This changes the workspace/session serialization to also persist the
order of windows across restarts.
Release Notes:
- Improved restoring of windows across restarts: the order of the
windows is now also restored. That means windows that were in the
foreground when Zed was quit will be in the foreground after restart.
(Right now only supported on Linux/X11, not on Linux/Wayland.)
Demo:
https://github.com/user-attachments/assets/0b8162f8-f06d-43df-88d3-c45d8460fb68
[](https://renovatebot.com)
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [base64](https://togithub.com/marshallpierce/rust-base64) |
workspace.dependencies | patch | `0.22.0` -> `0.22.1` |
---
### Release Notes
<details>
<summary>marshallpierce/rust-base64 (base64)</summary>
###
[`v0.22.1`](https://togithub.com/marshallpierce/rust-base64/blob/HEAD/RELEASE-NOTES.md#0221)
[Compare
Source](https://togithub.com/marshallpierce/rust-base64/compare/v0.22.0...v0.22.1)
- Correct the symbols used for the predefined `alphabet::BIN_HEX`.
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzNy40NDAuNyIsInVwZGF0ZWRJblZlciI6IjM3LjQ0MC43IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
[](https://renovatebot.com)
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [serde_json](https://togithub.com/serde-rs/json) | dependencies |
patch | `1.0.120` -> `1.0.121` |
| [serde_json](https://togithub.com/serde-rs/json) |
workspace.dependencies | patch | `1.0.120` -> `1.0.121` |
---
### Release Notes
<details>
<summary>serde-rs/json (serde_json)</summary>
###
[`v1.0.121`](https://togithub.com/serde-rs/json/releases/tag/v1.0.121)
[Compare
Source](https://togithub.com/serde-rs/json/compare/v1.0.120...v1.0.121)
- Optimize position search in error path
([#​1160](https://togithub.com/serde-rs/json/issues/1160), thanks
[@​purplesyringa](https://togithub.com/purplesyringa))
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about these
updates again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzNy40NDAuNyIsInVwZGF0ZWRJblZlciI6IjM3LjQ0MC43IiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR upgrades the `pnpm/action-setup` GitHub Action to v4.0.0.
Trying to see if I can fix the Renovate warning stemming from
https://github.com/pnpm/action-setup/issues/95.
Release Notes:
- N/A
This also rolls back the `TerminalWorkDir` abstraction I added for the
original remoting, and tidies up the terminal creation code to be clear
about whether we're creating a task *or* a terminal. The previous logic
was a little muddy because it assumed we could be doing both at the same
time (which was not true).
Release Notes:
- remoting alpha: Removed the ability to specify `gh cs ssh` or `gcloud
compute ssh` etc. See https://zed.dev/docs/remote-development for
alternatives.
- remoting alpha: Added support for terminal and tasks to new
experimental ssh remoting
Vim digraphs are a way to insert special characters using sequences of
two ASCII characters. I've implemented the feature using a new `Digraph`
operator, following the example of `AddSurrounds`. There are still a few
issues that I'm not sure what the best way to resolve them is.
- To insert `ş`, the user must pause between pressing `ctrl-k` and `s
,`, otherwise it triggers the binding for `ctrl-k s`. Is there a way to
disable `ctrl-k *` bindings while in insert, replace or waiting mode?
- Is there a better way to insert a string at all of the cursors? At the
moment I'm constructing the edits manually.
- The table of default digraphs is a 1.4k line rust expression. Is this
okay as long as it's in its own module?
- I'd like a second opinion on how best to structure the settings.json
entry.
- I have omitted the "meta character" feature as I don't think it makes
sense when editing UTF-8 text.
Release Notes:
- Added support for Vim digraphs.
Resolves#11871
In this pull request, we change the zed.dev protocol so that we pass the
raw JSON for the specified provider directly to our server. This avoids
the need to define a protobuf message that's a superset of all these
formats.
@bennetbo: We also changed the settings for available_models under
zed.dev to be a flat format, because the nesting seemed too confusing.
Can you help us upgrade the local provider configuration to be
consistent with this? We do whatever we need to do when parsing the
settings to make this simple for users, even if it's a bit more complex
on our end. We want to use versioning to avoid breaking existing users,
but need to keep making progress.
```json
"zed.dev": {
"available_models": [
{
"provider": "anthropic",
"name": "some-newly-released-model-we-havent-added",
"max_tokens": 200000
}
]
}
```
Release Notes:
- N/A
---------
Co-authored-by: Nathan <nathan@zed.dev>
This PR changes the `SettingsContainer` component such that the
elevation styles are applied by the parent instead of
`SettingsContainer` itself.
This means that components using `SettingsContainer` can be embedded in
different contexts, like the settings UI or a popover containing the
settings.
Release Notes:
- N/A
This PR gives the `NumericStepper` component an ID.
This prevents the UI and buffer font size settings controls from having
their increment/decrement buttons visually change when the other one is
pressed.
Release Notes:
- N/A
This PR extends the fix from #15336 to more places that had the same
issue.
An `add_references_to_properties` helper function has been added to
handle these cases uniformly.
Release Notes:
- N/A
This PR fixes an issue where we would clobber the other JSON Schema
fields for any field that we attached a reference to.
This resulted in these fields (e.g., `buffer_font_family`,
`ui_font_family`) losing things like their descriptions.
The approach has been adjusted that references are now added in an
additive fashion, rather than overriding the entire schema object.
Release Notes:
- Fixed an issue where font-related settings in `settings.json` were
missing their descriptions.
This PR formats the CSS in the docs with Prettier.
The indentation of these CSS files kept changing based on who last
touched them, so I added settings to the Zed repo to try and keep the
formatting intact until we can enforce it in CI.
Release Notes:
- N/A
Close#13786. To make `eslint` running on Windows, I made the following
changes:
1. Ensure that `zed` downloads the `.zip` file.
2. Handle the `$shared` symbolic link by copying files to the link
location.
3. In #13891, I mentioned that the `npm` `post-install` script was
always failing. After debugging, I found it was due to missing
environment variables. This has been fixed, and I will submit a new PR
to address the changes in #13891.
With this PR, `eslint` can now successfully run on Windows. Video:
https://github.com/user-attachments/assets/e85451b8-0388-490a-8a75-01c12d744f7c
Release Notes:
- Fixed `eslint` not running on Windows
([#13786](https://github.com/zed-industries/zed/issues/13786)).
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
This PR replaces the `build_tarball_url` with `build_asset_url` that
accepts an `AssetKind` enum to support downloading different kinds of
assets from GitHub.
Right now the only asset kind we support is still `.tar.gz`, but the new
structure is more amenable to adding more asset kinds.
Release Notes:
- N/A
This PR fixes running clippy on Windows, as it broke in #13223.
We can't run shell scripts on Windows, so we need to use something else.
Release Notes:
- N/A
https://github.com/zed-industries/zed/pull/13126 added the
`window_min_size` property for window creation, but it was only
implemented for macOS. This PR implements the property on Linux as well.
Release Notes:
- N/A
Previously, we used messages greater than `WM_USER` to pass information
between `WindowsPlatform` and `WindowsWindow`. For example, to close a
window, we handled it as follows:
1. The window sends a message with `WM_USER + 2` to `WindowsPlatform`.
2. `WindowsPlatform`, upon receiving this message, casts the `lparam` to
`HWND` and closes the window.
According to Microsoft's documentation, it is safe to use values between
`WM_USER` and `0xBFFF` as messages. However, certain versions of
Microsoft's IME use `WM_USER + 2` for UNKNOWN purposes. This causes step
2 to be erroneously triggered. The IME window's `lparam` value could be
arbitrary, leading to an attempt to close an arbitrary `HWND` and
resulting in errors.
It is quite surprising that Microsoft indicates using `WM_USER + 2` is
safe, yet Microsoft itself breaks this convention. I mean, well done
Microsoft!
This PR addresses the issue by using the `wparam` with a specific random
value for validation purpose when sending the aforementioned message.
Before `WindowsPlatform` attempts to close the window, it will first
verify the `wparam` value.
Special thanks to @shenjackyuanjie for helping me on this.
Co-authored-by: shenjackyuanjie <3695888@qq.com>
Release Notes:
- Fixed weird panic when IME window is closing(#15185, #12563).
---------
Co-authored-by: shenjack <3695888@qq.com>
Supersedes https://github.com/zed-industries/zed/pull/12090fixes#5180fixes#5055
See original PR for an example of the feature at work.
This PR changes the settings interface to be backwards compatible, and
adds the `ui_font_fallbacks`, `buffer_font_fallbacks`, and
`terminal.font_fallbacks` settings.
Release Notes:
- Added support for font fallbacks via three new settings:
`ui_font_fallbacks`, `buffer_font_fallbacks`, and
`terminal.font_fallbacks`.(#5180, #5055).
---------
Co-authored-by: Junkui Zhang <364772080@qq.com>
Still TODO:
* [x] hide this UI unless you have some ssh projects in settings
* [x] add the "open folder" flow with the new open picker
* [ ] integrate with recent projects / workspace restoration
Release Notes:
- N/A
This PR replaces `live_kit_server`'s usage of `jwt` with `jsonwebtoken`.
`jwt` hasn't been updated in 2 years and seems unmaintained.
`jsonwebtoken` has significantly more downloads and appears to be a
healthier crate overall.
Release Notes:
- N/A
Hi. This is a small pull request that changes the "language" field to
the "languages" field
because the `language` field is deprecated.
Additionally, allow the Ruby LSP to run in `*.erb` files.
Release Notes:
- N/A
This PR adds some helper functions in the `ui` crate that can be used to
get textural representations of keystrokes or key bindings.
Release Notes:
- N/A
This fixes#12125 and addresses what's described in here:
-
https://github.com/zed-industries/zed/issues/4977#issuecomment-2162094388
Before the changes in this PR, when running tasks, they inherited the
Zed process environment, but that might not be the process environment
that you'd get if you `cd` into a project directory.
We already ran into that problem with language servers and we fixed it
by loading the shell environment in the context of a projects root
directory and then passing that to the language servers when starting
them (or when looking for their binaries).
What the change here does is to add the behavior for tasks too: we use
the project-environment as the base environment with which to spawn
tasks. Everything else still works the same, except that the base env is
different.
Release Notes:
- Improved the environment-variable detection when running tasks so that
tasks can now access environment variables as if the task had been
spawned in a terminal that `cd`ed into a project directory. That means
environment variables set by `direnv`/`asdf`/`mise` and other tools are
now picked up.
([#12125](https://github.com/zed-industries/zed/issues/12125)).
Demo:
https://github.com/user-attachments/assets/8bfcc98f-0f9b-4439-b0d9-298aef1a3efe
When pressing <kbd>control</kbd> + <kbd>enter</kbd>, the AI-powered
inline transformation input displays an icon button and a token count,
which should show roughly the same numbers you'd see on your assistant
panel. At a first glance, though, the token count not being zero can be
confusing, where you'd wonder where that's coming from. That's because
the inline input uses whatever piece of context and/or information of
the currently selected assistant tab to suggest more accurate edits.
So, this PR introduces an informative piece of text to the
`ModelSelector` menu, on the inline transformation input, which delivers
exactly this bit of info, aimed at clarifying the connection between
these two methods of interacting with LLMs.
I've also took the opportunity to change the icon button's icon to one
that's a bit easier to see, still representing the affordance of "click
to configure something".
Release Notes:
- Add note about how inline edits consume context from the assistant
panel to clarify interaction with LLMs.
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
[](https://renovatebot.com)
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [log](https://togithub.com/rust-lang/log) | workspace.dependencies |
patch | `0.4.21` -> `0.4.22` |
---
### Release Notes
<details>
<summary>rust-lang/log (log)</summary>
###
[`v0.4.22`](https://togithub.com/rust-lang/log/blob/HEAD/CHANGELOG.md#0422---2024-06-27)
[Compare
Source](https://togithub.com/rust-lang/log/compare/0.4.21...0.4.22)
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzNy40MzguMCIsInVwZGF0ZWRJblZlciI6IjM3LjQzOC4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
[](https://renovatebot.com)
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [oo7](https://togithub.com/bilelmoussaoui/oo7) | dependencies | patch
| `0.3.0` -> `0.3.3` |
---
### Release Notes
<details>
<summary>bilelmoussaoui/oo7 (oo7)</summary>
###
[`v0.3.3`](https://togithub.com/bilelmoussaoui/oo7/releases/tag/0.3.3)
[Compare
Source](https://togithub.com/bilelmoussaoui/oo7/compare/0.3.2...0.3.3)
Bilal Elmoussaoui:
- client/item: Force tuple usage when serializing
- client: Use async UnixStream
###
[`v0.3.2`](https://togithub.com/bilelmoussaoui/oo7/releases/tag/0.3.2)
[Compare
Source](https://togithub.com/bilelmoussaoui/oo7/compare/0.3.1...0.3.2)
Kévin Commaille:
- [client: Fix compile issue with tracing
feature](8720514d56)
- [client: Do not create features for optional deps already behind a
feature](c4cad3dbd4)
- Various clippy fixes
###
[`v0.3.1`](https://togithub.com/bilelmoussaoui/oo7/releases/tag/0.3.1)
[Compare
Source](https://togithub.com/bilelmoussaoui/oo7/compare/0.3.0...0.3.1)
Daiki Ueno:
- [portal: Support migration from legacy keyring
format](0e4d787372)
Dhanuka Warusadura:
- [portal: Add rekeying support for
oo7::portal::Keyring](96dd3c4292)
Felix Häcker:
- [service: Use correct signal name for
CollectionDeleted](19499a6499)
- [service: Add signals for collection
create/delete/change](c4e68b8e76)
- [collection: Add path to public
api](7effc007d4)
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzNy40MzguMCIsInVwZGF0ZWRJblZlciI6IjM3LjQzOC4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Follow-up of https://github.com/zed-industries/zed/pull/15256
Returns zero size for no items to render.
Incorrect worktree state made the uniform list to have 0 items to
render, so
```Rust
let mut items = (self.render_items)(item_ix..item_ix + 1, cx);
let mut item_to_measure = items.pop().unwrap();
```
panicked as the first line returned an empty array despite a
single-element range provided.
Release Notes:
- N/A
This PR adds the `renovate[bot]` user to the `GET /contributor` endpoint
so that it passes the CLA check.
I patched this temporarily by adding a case into the `zed.dev` endpoint
the fronts this one, but I think long-term it will be better for collab
to be the source of truth.
Release Notes:
- N/A
[](https://renovatebot.com)
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [ctor](https://togithub.com/mmastrac/rust-ctor) |
workspace.dependencies | patch | `0.2.6` -> `0.2.8` |
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzNy40MzguMCIsInVwZGF0ZWRJblZlciI6IjM3LjQzOC4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR makes custom rows in `ContextMenu`s use a regular cursor instead
of a pointer.
Even though custom rows were marked as not selectable, we would still
pass a click handler to them, causing the `ListItem` to show a pointer
cursor.
Release Notes:
- N/A
This PR adds the missing workspace lint configuration for the following
crates that were missing it:
- `google_ai`
- `open_ai`
- `tab_switcher`
Release Notes:
- N/A
This PR adds a new `xtask` command for checking that packages conform to
certain standards.
Still a work-in-progress, but right now it checks:
- If `[lints] workspace = true` is set
- If packages are using non-workspace dependencies
Release Notes:
- N/A
Follow-up of https://github.com/zed-industries/zed/pull/15178
* shows proper cursor on hovering a block that's over a git hunk
* show gutter buttons better when git hunks are on the same line
* show deleted hunks' gutter buttons better when git blame info is shown
in the gutter
Release Notes:
- N/A
[](https://renovatebot.com)
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [sha2](https://togithub.com/RustCrypto/hashes) |
workspace.dependencies | patch | `0.10.7` -> `0.10.8` |
---
### Release Notes
<details>
<summary>RustCrypto/hashes (sha2)</summary>
###
[`v0.10.8`](https://togithub.com/RustCrypto/hashes/compare/sha2-v0.10.7...sha2-v0.10.8)
[Compare
Source](https://togithub.com/RustCrypto/hashes/compare/sha2-v0.10.7...sha2-v0.10.8)
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzNy40MzguMCIsInVwZGF0ZWRJblZlciI6IjM3LjQzOC4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR upgrades `async-tungstenite` to v0.23.
This is so we can get the CVE fix in `tungstenite` v0.20.1.
Now that #15219 is done, upgrading to v0.23 no longer breaks
authentication with collab.
Release Notes:
- N/A
This PR upgrades `async-tungstenite` to v17.0.3.
We previously attempted upgrading `async-tungstenite` in #15039, but
broke authentication with collab in the process.
Upon further investigation, I determined that the root cause is due to
this change in `tungstenite` v0.17.0:
> Overhaul of the client's request generation process. Now the users are
able to pass the constructed `http::Request` "as is" to
`tungstenite-rs`, letting the library to check the correctness of the
request and specifying their own headers (including its own key if
necessary). No changes for those ones who used the client in a normal
way by connecting using a URL/URI (most common use-case).
We _were_ relying on passing an `http::Request` directly to
`tungstenite`, meaning we did not benefit from the changes to the common
path (of passing a URL/URI).
This meant that—due to changes in `tungstenite`—we were now missing the
`Sec-WebSocket-Key` header that `tungstenite` would otherwise set for
us.
Since we were only passing a custom `http::Request` to set headers, our
approach has been adjusted to construct the initial WebSocket request
using `tungstenite`'s `IntoClientRequest::into_client_request` and then
modifying the request to set our additional desired headers.
Release Notes:
- N/A
The names suggested by `buffer_font_family` are reported by
`all_font_names`. Therefore, `all_font_names` should report family names
rather than postscript names.
close#14854
Release Notes:
- N/A
This PR upgrades the version of `wasmtime` and `wasmtime-wasi` in use to
v21.0.1.
We have to skip v20 because Tree-sitter also skipped it.
Here are the changes that had to be made:
### v19 -> v20
After upgrading the `wasmtime` packages to v20, I also had to run `cargo
update -p mach2` to pull in
[v0.4.2](https://github.com/JohnTitor/mach2/releases/tag/0.4.2) to fix
some compile errors.
There were a few minor API changes in `wasmtime-wasi` from
https://github.com/bytecodealliance/wasmtime/pull/8228 that we needed to
account for.
### v20 -> v21
Since there isn't a Tree-sitter version that depends on `wasmtime@v20`,
we're jumping straight to v21.
The published version of Tree-sitter (v0.22.6) still depends on
`wasmtime@v19`, but there was a commit
(7f4a57817d)
later that month that upgrades the `wasmtime` dependency to v21.
We're patching Tree-sitter to that commit so we can get the new
`wasmtime` version.
The main change in v21 is that imports generated by `bindgen!` are no
longer automatically trapped
(https://github.com/bytecodealliance/wasmtime/pull/8310), so we need to
add `trappable_imports: true` to our `bindgen!` calls.
Release Notes:
- N/A
Since `WindowsDispatcher` requires a minimum Windows version of Windows
10 Fall Creators Update (10.0.16299), and the `alacritty_terminal`
dependency relies on conPTY, an API introduced in the same version,
additionally, `DirectWriteTextSystem` also relies on Windows 10 Fall
Creators Update (10.0.16299), so it seems reasonable to make
`CosmicTextSystem` Linux-only. And we can use `DirectWriteTextSystem` on
the Windows platform exclusively. I hope this approach makes sense.
Release Notes:
- N/A
Now it is possible to change keyboard layouts with `setxkbmap` without
having to restart zed.
Release Notes:
- x11: Support for keyboard layout hot plugging.
Previously, we've only marked restored buffers as dirty. This PR changes
that behavior in case the buffer has been associated with a file and
that file has changed on disk since the last time Zed stored its
contents.
Example timeline:
1. User edits file in Zed, buffer is dirty
2. User quites Zed with `cmd-q`
3. User changes file on disk: `echo foobar >> file.txt` or `git checkout
file.txt`
4. User starts Zed
5. File/buffer are now marked as having a conflict (yellow icon)
Release Notes:
- Unsaved files that are restored when Zed starts are now marked as
having a conflict if they have been changed on disk since the last time
they were stored.
Demo:
https://github.com/user-attachments/assets/6098b485-b325-49b7-b694-fd2fc60cce64
Release Notes:
- N/A
Currently Windows environments do not have a `shell_env`. This causes
the Zig extension to error when trying to call `worktree.shell_env()`
since extensions api isn't yet on `0.0.7` and thus not using wasm-host
`0.0.7` we need to only call for the shell env only on non-windows
systems. 0.0.7 and onward at the moment return a Result from
`shell_env()`. The binary path is also slightly different on windows.
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
[](https://renovatebot.com)
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [any_vec](https://togithub.com/tower120/any_vec) |
workspace.dependencies | minor | `0.13` -> `0.14` |
---
### Release Notes
<details>
<summary>tower120/any_vec (any_vec)</summary>
###
[`v0.14.0`](https://togithub.com/tower120/any_vec/blob/HEAD/CHANGELOG.md#0140)
[Compare
Source](https://togithub.com/tower120/any_vec/compare/v0.13.0...v0.14.0)
##### Added
- Now library `no_std` friendly.
##### Removed
- Helpers `any_value::move_out`, `any_value::move_out_w_size` removed as
redundant.
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzNy40MzguMCIsInVwZGF0ZWRJblZlciI6IjM3LjQzOC4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR updates the Renovate config to split major versions changes into
multiple PRs.
This way we only have to deal with one set of breaking changes at a time
instead of jumping across multiple major versions.
Release Notes:
- N/A
[](https://renovatebot.com)
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [async-broadcast](https://togithub.com/smol-rs/async-broadcast) |
dependencies | patch | `0.7.0` -> `0.7.1` |
---
### Release Notes
<details>
<summary>smol-rs/async-broadcast (async-broadcast)</summary>
###
[`v0.7.1`](https://togithub.com/smol-rs/async-broadcast/blob/HEAD/CHANGELOG.md#Version-071)
[Compare
Source](https://togithub.com/smol-rs/async-broadcast/compare/0.7.0...v0.7.1)
- Add a `poll_recv()` method to the `Receiver` type. This allows for
`Receiver`
to be used in `poll`-based contexts.
([#​56](https://togithub.com/smol-rs/async-broadcast/issues/56))
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzNy40MzguMCIsInVwZGF0ZWRJblZlciI6IjM3LjQzOC4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
[](https://renovatebot.com)
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [derive_more](https://togithub.com/JelteF/derive_more) |
workspace.dependencies | patch | `0.99.17` -> `0.99.18` |
---
### Release Notes
<details>
<summary>JelteF/derive_more (derive_more)</summary>
###
[`v0.99.18`](https://togithub.com/JelteF/derive_more/compare/v0.99.17...v0.99.18)
[Compare
Source](https://togithub.com/JelteF/derive_more/compare/v0.99.17...v0.99.18)
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzNy40MzguMCIsInVwZGF0ZWRJblZlciI6IjM3LjQzOC4wIiwidGFyZ2V0QnJhbmNoIjoibWFpbiIsImxhYmVscyI6W119-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
This PR updates the Renovate config to place the "Release Notes" section
in the PR body footer.
Also removed the `cla-signed` label, because the CLA bot just removes
it.
Release Notes:
- N/A
This PR applies some further updates to the Renovate config.
We add the https://github.com/zed-industries/zed/labels/cla-signed label
to the PRs so that check passes.
Also seeing if we can add a "Release Notes" sections to Renovate PRs.
Release Notes:
- N/A
This PR makes it so we pin a specific version of `typos` in CI, rather
than just relying on whatever is already installed or what the latest
version is.
Release Notes:
- N/A
This also refactors the BufferStore + WorktreeStore interfaces to make
them cleaner, more fully encapsulating the RPC aspects of their
functionality.
Release Notes:
- N/A
* Added some missing operators, delimeters and keywords
* Highlight destructor, and operator overload as `@function`
* Moved `(field_identifier)` to the top, as it was highlighting methods
as `@property`
There are still some problems with something like `n1::n2::foo(...)`,
`foo` is not properly highlighted as a function
Release Notes:
- Improved C++ syntax highlighting
This PR updates instances where we were using `.when_else` and
`.when_else_some` to use `.map` with a conditional inside.
This allows us to avoid reinventing Rust's syntax for conditionals and
(IMO) makes the code easier to read.
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/4565
To fix issues with code blocks' parsing in Markdown, a
tree-sitter-markdown library update is needed.
But `tree_sitter::language` is used in many places within core Zed,
which forced more library updates.
Release Notes:
- Updated tree-sitter parsers for core languages
---------
Co-authored-by: Max Brunsfeld <max@zed.dev>
Co-authored-by: Piotr Osiewicz <piotr@zed.dev>
This is related to #15023 where we have the running Rubocop LSP that
provides diagnostics and formatting capabilities. Rubocop LSP sends its
capabilities
back to Zed without support for "textDocument/definition" request, Zed
actually does not check that and sends a request to Rubocop that results
in the server error "Unsupported method: textDocument/definition".
The fix here is related to
https://github.com/zed-industries/zed/pull/14666
Release Notes:
- N/A
As the title says! Also decreased a bit the gap between them so that's
consistent with other similar icon button stacks. I wish they could be
bigger buttons but the icons would need to be refined further for that,
as each has been drawn with a different dimension/bounding-box. Maybe in
the near future :)
---
Release Notes:
- N/A
This PR adds settings controls for the UI and buffer font weight
settings.
It also does some work around grouping the settings into related
sections.
Release Notes:
- N/A
Minor bug where the command count overflows when enough digits are
entered. This swaps out simple multiplication/addition for their checked
counter parts, falling back to the previous value in case of overflow.
Release Notes:
- N/A
This PR adds support for defining feature flags that aren't auto-enabled
for Zed staff.
This will be useful in situations where we want to land a feature behind
a feature flag, but only want to ship it to certain staff members (e.g.,
the members currently working on it) initially.
Release Notes:
- N/A
Improved SublimeText keymap (Mac & Linux).
- Add bind for MoveLineUp/Down (`ctrl-shift-up` on linux and `cmd-ctrl-up` on MacOS).
Co-authored-by: unixtensor <brandon@rhpidfyre.io>
Follow-up of https://github.com/zed-industries/zed/pull/14886
We do not require the branch to be up-to-date with `main` before
merging, and in 4 days some related test code got reworked so that there
were no conflicts and it slipped.
Release Notes:
- N/A
This PR increases the size of the the icon buttons within the inline
editors, both within the buffer and on the terminal. I also added
properties to make sure they always render as a square, as well as
tweaking the stop icon SVG, adding an alternative sparkle icon that fit
the same grid as the close (14x14) icon, and adding a bit more right
padding on the buffer's case so it doesn't collide with the scrollbar.
End result is that they have a bit of an easier target space area and
normalized sizes.
---
Release Notes:
- N/A
When using the inline assistant with a language such as Go that uses
tabs, if the user selects a block of text that is correctly formatted
and where the first line has no indentation, the `suggested_line_indent`
variable ends up with `IndentSize { len: 0, kind: Space }`. That's
because `suggested_line_indent` current relies on
`BufferSnapshot::suggested_indents` suggestion for the first line on the
selection, but since it is already correctly indented, there are no
suggestions and `MultiBufferSnapshot::indent_size_for_line` is used
instead.
2d96bba61f/crates/assistant/src/inline_assistant.rs (L2124-L2128)
In this patch, we also take a look at the rest of the selection and
detect tabs. If one is encountered, we assume that tabs should always be
used. I suppose this isn't perfect, especially if the original file had
a mix of spaces and tabs, however it seems better than the status quo.
I considered using `BufferSnapshot::language_indent_size_at`, but I
imagine tabs should be preserved even when a specific language isn't
being used.
See screenshot below of the original prompt with this patch.
Tests:
* New unit test
* I've also manually tested with a few other cases: selection where all
lines are indented and file that only use spaces.
Release Notes:
- Fixed 'inline_assistant: tabs are overwritten with space characters
when first line in selection has no indentation'
([#14885](https://github.com/zed-industries/zed/issues/14885)).
<img width="942" alt="image"
src="https://github.com/user-attachments/assets/f2c5d7e9-e8bc-400b-bd6f-09e4a89d22c1">
Improved Project Panel Settings Documentation: The documentation for the
project panel settings has been enhanced for clarity and
comprehensiveness, providing better guidance and examples for users.
Default values have been aligned with project_panel_settings.rs.
Release Notes:
- N/A
This PR mostly refines the model selector popover design by formatting
the models names' and adjusting spacing/alignment in the list-related
items. The list component changes could've been made in a separate PR
but it was also very practical to do it here as I was already
in-context. Either way, I'm happy to separate if that's better!
One thing I couldn't necessarily figure out, though, is why the order
changed (e.g., Anthropic at last ). I wonder if that was because of the
separator logic somehow? I'd love guidance here—new to Rust!
| Before | After |
|--------|--------|
| <img width="228" alt="Screenshot 2024-07-23 at 21 02 33"
src="https://github.com/user-attachments/assets/3372c6c9-08dc-4d71-9265-26f015e2dbc2">
| <img width="228" alt="Screenshot 2024-07-23 at 21 01 45"
src="https://github.com/user-attachments/assets/624cc7db-a3d9-48e3-99d7-c29829501130">
|
---
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Bennet Bo Fenner <bennet@zed.dev>
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
This adds support for detecting line comments in the
[Jupytext](https://jupytext.readthedocs.io/) format. When line comments
such as `# %%` is present, invoking `repl: run` will evaluate the code
between these line comments as a unit.
/cc @rgbkrk
```py
# %%
# This is my first block
print(1)
print(2)
# %%
# This is my second block
print(3)
```
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Thorsten <thorsten@zed.dev>
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
This PR adds support for a new encryption format for exchanging access
tokens during the authentication flow.
The new format uses Optimal Asymmetric Encryption Padding (OAEP) instead
of PKCS#1 v1.5, which is known to be vulnerable to side-channel attacks.
**Note: We are not yet encrypting access tokens using the new format, as
this is a breaking change between the client and the server. This PR
only adds support for it, and makes it so the client and server can
decrypt either format moving forward.**
This required bumping the RSA key size from 1024 bits to 2048 bits. This
is necessary to be able to encode the access token into the ciphertext
when using OAEP.
This also follows OWASP recommendations:
> If ECC is not available and RSA must be used, then ensure that the key
is at least 2048 bits.
>
> —
[source](https://cheatsheetseries.owasp.org/cheatsheets/Cryptographic_Storage_Cheat_Sheet.html#algorithms)
Release Notes:
- N/A
This PR upgrades the `rsa` crate to v0.9.6.
The version we were using was rather old, and for something
security-sensitive we should be using a recent version.
No behavioral changes have been made, just updates to account for
changes in the crate's API.
Release Notes:
- N/A
This PR adds some tests to ensure we don't regress in our public key
encoding/decoding capabilities when making changes in this area.
Release Notes:
- N/A
This PR adds a global `Fs` instance to the app context.
This will make it easier to access the filesystem in some cases instead
of having to thread it around.
Release Notes:
- N/A
cbindgen pulled that in, but we don't really need it (Plus it pulls in a
dep with an advisory)
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
This pulls in https://github.com/kvark/blade#144 to see if it results in
fewer bad GPU configurations selected
Release Notes:
- linux: Improved graphics card detection
... on all platforms.
`ctrl-shift-enter` for the repl, `cmd-enter` for the assistant. People
can override this behavior as they desire in their own keymaps.
Release Notes:
- N/A
Fixes#4822
- [x] Release note
- [ ] Surface formatting errors via a toast
- [x] Doc updates
- [x] Have "language-server" accept an optional name of the server.
Release Notes:
- `format` and `format_on_save` now accept an array of formatting
actions to run.
- `language_server` formatter option now accepts the name of a language
server to use (e.g. `{"language_server": {"name: "ruff"}}`); when not
specified, a primary language server is used.
---------
Co-authored-by: Thorsten <thorsten@zed.dev>
Keeps the background the same as the output area background by making
the terminal background be `Hsla::transparent_black()`.
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
<img width="624" alt="image"
src="https://github.com/user-attachments/assets/f492b0bd-14c3-49e2-b2ff-dc78e52b0815">
- [x] Correctly set custom model token count
- [x] How to count tokens for Gemini models?
- [x] Feature flag zed.dev provider
- [x] Figure out how to configure custom models
- [ ] Update docs
Release Notes:
- Added support for quickly switching between multiple language model
providers in the assistant panel
---------
Co-authored-by: Antonio <antonio@zed.dev>
When the evaluation range ends at the start of a line, back it up to the
end of the previous line. This avoids inserting extra newlines below the
evaluation range when they already exist.
Release Notes:
- N/A
Co-authored-by: Nathan <nathan@zed.dev>
This PR adds a placeholder view for the settings UI. It does not contain
any functionality, as of yet.
This view is staff-shipped behind a feature flag.
Release Notes:
- N/A
Release Notes:
- linux: Added GPU information to `editor: Copy System Specs to
Clipboard`
- linux: Show a prominant warning before running under llvmpipe and
similar.
The current Astro Extension fails to load properly if it can't find a
`tsserver.js` file in the current workspaces' `node_modules` folder.
This happens pretty frequently, either if `typescript` is not installed
in the project (which it isn't by default), or if `node_modules` is not
in the workspace root.
This PR adds a fallback method of installing `typescript` alongside the
extensions' language server if it is not found in the workspaces'
`node_modules`, as well as correctly setting the `tsdk` path in the
initialization options.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
### Summary
This PR adds support for count and object motions to the toggle comments
action in Vim mode. The relevant issue is
[#14337](https://github.com/zed-industries/zed/issues/14337).
For example, `2 g c j` will toggle comments three lines downward. `g c g
g` will toggle comments from the current cursor position up to the start
of the file.
Notably missing from this PR are `g c b` (toggle comments for the
current block) as well as `g c p` (toggle comments for the current
paragraph). These seem to be non-standard.
The new module `normal/toggle_comments.rs` has been copied almost
verbatim from `normal/indent.rs`. Maybe that ought to be abstracted over
but I feel I lack the overview.
Release Notes:
- vim: Added support for count and object motion to the toggle comments
action ([#14337](https://github.com/zed-industries/zed/issues/14337)).
Enables the jupyter feature by default, which is shown only when we have
a kernelspec or know that we (can) support it well (Python,
Deno/TypeScript).
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
This PR adds a new menu entry in the REPL item in the quick action bar
to open up the REPL sessions view:
<img width="232" alt="Screenshot 2024-07-22 at 4 54 36 PM"
src="https://github.com/user-attachments/assets/acc60a25-7722-4331-9b80-fab9cca65842">
This makes this more discoverable than having to know that the command
exists.
Release Notes:
- N/A
This PR removes the REPL panel and replaces it with a new sessions view
that gets displayed in its own pane.
The sessions view can be opened with the `repl: sessions` command (we
can adjust the name, as needed).
There was a rather in-depth refactoring needed to extricate the various
REPL functionality on the editor from the `RuntimePanel`.
<img width="1136" alt="Screenshot 2024-07-22 at 4 12 12 PM"
src="https://github.com/user-attachments/assets/ac0da351-778e-4200-b08c-39f9e77d78bf">
<img width="1136" alt="Screenshot 2024-07-22 at 4 12 17 PM"
src="https://github.com/user-attachments/assets/6ca53476-6ac4-4f8b-afc8-f7863f7065c7">
Release Notes:
- N/A
given zaucy/zed-starlark#4 was merged, zed-starlark now has multiple
LSPs and requires additional configuration which isn't available
directly for extensions.
cc @zaucy
Release Notes:
- N/A
This PR factors a `ReplStore` out of the `RuntimePanel`.
Since we're planning to remove the `RuntimePanel` and replace it with an
ephemeral tab that can be opened, we need the kernel specifications and
sessions to have somewhere long-lived that they can reside in.
Release Notes:
- N/A
Simplify key dispatch code.
Previously we would maintain a cache of key matchers for each context
that
would store the pending input. For the last while we've also stored the
typed prefix on the window. This is redundant, we only need one copy, so
now
it's just stored on the window, which lets us avoid the boilerplate of
keeping
all the matchers in sync.
This stops us from losing multikey bindings when the context on a node
changes
(#11009) (though we still interrupt multikey bindings if the focus
changes).
While in the code, I fixed up a few other things with multi-key bindings
that
were causing problems:
Previously we assumed that all multi-key bindings took precedence over
any
single-key binding, now this is done such that if a user binds a
single-key
binding, it will take precedence over all system-defined multi-key
bindings
(irrespective of the depth in the context tree). This was a common cause
of
confusion for new users trying to bind to `cmd-k` or `ctrl-w` in vim
mode
(#13543).
Previously after a pending multi-key keystroke failed to match, we would
drop
the prefix if it was an input event. Now we correctly replay it
(#14725).
Release Notes:
- Fixed multi-key shortcuts not working across completion menu changes
([#11009](https://github.com/zed-industries/zed/issues/11009))
- Fixed multi-key shortcuts discarding earlier input
([#14445](https://github.com/zed-industries/zed/pull/14445))
- vim: Fixed `jk` binding preventing you from repeating `j`
([#14725](https://github.com/zed-industries/zed/issues/14725))
- vim: Fixed `escape` in normal mode to also clear the selected
register.
- Fixed key maps so user-defined mappings take precedence over builtin
multi-key mappings
([#13543](https://github.com/zed-industries/zed/issues/13543))
- Fixed a bug where overridden shortcuts would still show in the Command
Palette
Per the LSP spec, we should pass .data field of diagnostics into code
action request:
```
/**
* A data entry field that is preserved between a
* `textDocument/publishDiagnostics` notification and
* `textDocument/codeAction` request. *
* @since 3.16.0 */ data?: LSPAny;
```
Release Notes:
- Fixed rare cases where a code action triggered by diagnostic may not
be available for use.
Added documentation for #14198
I also suggest replacing format guides from `black` to `ruff` to unify
the tooling in the document.
Ruff is now widely used in the Python community, including
[fastapi](cd6e9db065/pyproject.toml (L213)).
It's compatible with black but a lot faster.
Release Notes:
- N/A
This PR updates the Erlang extension with support for installing the
[Erlang Language
Platform](https://github.com/WhatsApp/erlang-language-platform) (`elp`)
language server from the GitHub Release assets.
Release Notes:
- N/A
This PR updates the default settings to treat `tsconfig.json` files as
JSONC.
Resolves https://github.com/zed-industries/zed/issues/14906.
Release Notes:
- TypeScript's `tsconfig.json` files are now treated as JSONC.
The git blame dialog doesn't give the user a way to quickly copy the SHA
of the associated commit for a line. Adding an option for users to
quickly access this SHA is helpful for user's to do any more git-fu they
might need, such as viewing the full changes themselves within git,
checking the commit out, bisecting off the commit, etc.
This is also very handy for user's of self-hosted git providers.
Determining what provider a self-hosted repository is using could be
quite difficult and this presents an easy option to allow users to look
up more about a commit without having to memorize the short SHA.
Release Notes:
- Added a button to copy the SHA from a Git blame entry.
<img width="1552" alt="A screenshot showing the new copy SHA button
within the Zed editor's inline blame "
src="https://github.com/user-attachments/assets/9365950d-3a3f-4c11-b119-ab02654f5669">
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
This PR updates a number of spots where we were setting all of the
`TextStyle` fields even if we were not changing the values from the
defaults.
We now use `..Default::default()`.
Release Notes:
- N/A
This PR updates the `ImageCacheError::BadStatus` variant to include the
URI of the image that failed to load.
This helps contextualize the resulting error logs.
Release Notes:
- N/A
This removes mention of "copy bundle to `/Applications`" from the help
text for `bundle-mac` because, as far as I can tell, the `-l` flag only
controls the build, not the copy/install. (The copy/install is
controlled by using the `-i` flag in conjunction with `-l`.)
Release Notes:
- N/A
This PR bumps the hard-coded Node.js version from v18.x (Hydrogen), which was LTS until October 2023, to v22.x (Jod) which will be the next LTS release in October 2024.
Release Notes:
- Updated Zed's node version (v18.x -> v22.x)
* Fixed mis-named macOS remote server archives in actions and packaging
scripts
* Fixed an issue with the ask pass script on linux
* Download nightly versions of remote servers in dev mode (not stable)
Release Notes:
- N/A
This PR replaces the `Into<ElementId> for BlockId` implementation with
`From<BlockId> for ElementId`.
This keeps in line with Rust's guidance for preferring implementing
`From`, and gives us more flexibility when converting.
Release Notes:
- N/A
This PR reworks the `Tab` component to not use absolute positioning in
order to position the tab slots.
This should make any further adjustments we want to make to the spacing
easier to do.
Release Notes:
- N/A
This PR fixes an issue in the Lexical language server installation where
the `start_lexical.sh` script was not being made executable when
installed from GitHub.
Release Notes:
- N/A
We will soon need `semantic_index` to be able to use
`CompletionProvider`. This is currently impossible due to a cyclic crate
dependency, because `CompletionProvider` lives in the `assistant` crate,
which depends on `semantic_index`.
This PR breaks the dependency cycle by extracting two crates out of
`assistant`: `language_model` and `completion`.
Only one piece of logic changed: [this
code](922fcaf5a6 (diff-3857b3707687a4d585f1200eec4c34a7a079eae8d303b4ce5b4fce46234ace9fR61-R69)).
* As of https://github.com/zed-industries/zed/pull/13276, whenever we
ask a given completion provider for its available models, OpenAI
providers would go and ask the global assistant settings whether the
user had configured an `available_models` setting, and if so, return
that.
* This PR changes it so that instead of eagerly asking the assistant
settings for this info (the new crate must not depend on `assistant`, or
else the dependency cycle would be back), OpenAI completion providers
now store the user-configured settings as part of their struct, and
whenever the settings change, we update the provider.
In theory, this change should not change user-visible behavior...but
since it's the only change in this large PR that's more than just moving
code around, I'm mentioning it here in case there's an unexpected
regression in practice! (cc @amtoaer in case you'd like to try out this
branch and verify that the feature is still working the way you expect.)
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
This is a first step towards allowing you to edit remote projects
directly over SSH. We'll start with a pretty bare-bones feature set, and
incrementally add further features.
### Todo
Distribution
* [x] Build nightly releases of `zed-remote-server` binaries
* [x] linux (arm + x86)
* [x] mac (arm + x86)
* [x] Build stable + preview releases of `zed-remote-server`
* [x] download and cache remote server binaries as needed when opening
ssh project
* [x] ensure server has the latest version of the binary
Auth
* [x] allow specifying password at the command line
* [x] auth via ssh keys
* [x] UI password prompt
Features
* [x] upload remote server binary to server automatically
* [x] opening directories
* [x] tracking file system updates
* [x] opening, editing, saving buffers
* [ ] file operations (rename, delete, create)
* [ ] git diffs
* [ ] project search
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Ensures that the assistant keybinding for cmd-enter takes precedence
over `repl::Run`.
On Linux, `ctrl-enter` (the equivalent), issues `repl::Run` when in a
jupyter context.
Release Notes:
- N/A
This fixes#14818.
The change in #14055 broke the tasks in `zsh` (and I suspect in `bash`,
`sh` too), because what was executed was NOT
$ go test . -run '^TestThis$'
but instead this:
$ go test . -run \'^TestThis$\'
And in `zsh` this means that `'` is part of the argument passed to `go`,
which means the targeting string is wrong.
Since the problem in `fish` doesn't seem to be the `^` but the `$`, we
can only escape that, which makes the escaped string work in `zsh` and
`fish` and `bash` (in which I've tested this change here)
Release Notes:
- go: Fix running single tests by changing the quoted expression in the
`go test` command to work again in `bash`, `zsh`, etc.
([#14818](https://github.com/zed-industries/zed/issues/14818))
Cleans up action registration with the editors and also fixes a major
bug where only one workspace's panel was getting session info (due to my
not understanding that `cx.observe_new_views` is for the whole app).
Release Notes:
- N/A
Co-authored-by: Conrad <conrad@zed.dev>
Release Notes:
- Fixed a bug that caused focus to be lost when renames and inline
assists were scrolled offscreen.
---------
Co-authored-by: Nathan <nathan@zed.dev>
Adds a command to refresh kernelspecs. Also added the kernelspecs to the
runtime panel when none are running. That's just for now until we move
out of the panel completely.
Release Notes:
- N/A
This PR updates the PHP extension with support for reading LSP settings
when using Intelephense as the language server.
Addresses #4258.
Release Notes:
- N/A
Note that this shouldn't have any visible user-facing behavior yet. The
feature is incomplete but we wanna merge early to avoid a long-running
branch.
Release Notes:
- N/A
---------
Co-authored-by: Nathan <nathan@zed.dev>
In the case that a line ended with a 0-length run, we would get our
highlights offset by one position.
Release Notes:
- Fixed syntax highlights being offset from syntax in diagnostics
popovers.
This PR updates the `/docs` slash command with the ability to
just-in-time index a package when there are not yet any results in the
index.
When running a `/docs` slash command, we fist check to see if there are
any results in the index that would match the search.
If there are, we go ahead and return them, as we do today.
However, if there are not yet any results we kick off an indexing task
as part of the command execution to fetch the results.
Release Notes:
- N/A
Sets the account status state to allow the Supermaven button to move out
of the "Supermaven is initializing..." state. We also need to add the
ability to sign out and change tiers but I will do that in a separate
PR.
Release Notes:
- Improved Supermaven status messages
([#12715](https://github.com/zed-industries/zed/issues/12715)).
Fix: #14242
At present, we don't trigger the method `start_recording(cx)` to start
recording when typing add_surround, so it can't be repeated well, delete
and change actually don't increase, but when entering `d` and `c`, it
happens that these two operations are recorded, I think maybe we also
need to call `start_recording(cx)` when calling delete_surround and
change_surround, otherwise when the user modifies their shortcuts, these
two functions may not be supported by repeat
Release Notes:
- N/A
At present, when calculating some ranges, we take the `tuple_windows` to
iterate forward, which will cause some problems when the cursor is being
front, because `tuple_windows` iteration cannot iterate to the very
beginning, so there will be some cases that cannot be calculated, adjust
this method, and now it can calculate more perfectly, and the execution
speed is about the same
Release Notes:
- N/A
This PR updates the Vue extension with support for installing and using
its own copy of TypeScript if it can't find one in the project.
The way we resolve `typescript` is as follows:
- We check the project's `package.json` for `typescript` in either the
`devDependencies` or `dependencies`
- If found, we set the `typescript.tsdk` to
`node_modules/typescript/lib` to use the project's copy of TypeScript
- If not found, we install the latest version of `typescript` (if not
already downloaded) to the extension's `package.json` and use that
version for `typescript.tsdk`
This should resolve instances where Vue projects that do not have an
explicit `typescript` dependency—such as those using Vue with plain
JavaScript—fail to load the language server due to TypeScript not being
found.
Release Notes:
- N/A
For context, see:
-
https://github.com/zed-industries/zed/issues/5124#issuecomment-2227743811
-
https://github.com/zed-industries/zed/pull/14738#issuecomment-2236613976
Short version: on Intel MacBooks it's better to prefer integrated
(`is_low_poer()`) GPUs, except when a user has an eGPU plugged-in, in
which case they very likely want to prefer that.
Before this change, we'd always prefer the integrated GPU, even if an
eGPU was available.
Now, with this change, if a user has
- eGPU
- integrated GPU
- discrete GPU
We'd first prefer eGPU, then integrated, then discrete.
Release Notes:
- Changed preference for GPUs on macOS so that eGPUs are now preferred
over integrated ones (and both of which are preferred over discrete
GPUs) on Intel Macs.
Follow-up of https://github.com/zed-industries/zed/pull/14515
Fixed certain visual artifacts, related to multi line diagnostics and
block toggle rendering.
Also enabled diagnostics toolbar controls for the experimental view too.
Release Notes:
- N/A
This PR adds a `text_color` method to `TabContentParams` to more easily
compute the text color to be used for tab contents.
This consolidates a number of conditionals that were scattered all over
the place to give us a singular source of truth for these colors.
Release Notes:
- N/A
This PR refines the appearance of the channel tabs.
We now display the channel icon in the tab's icon slot. We also now
adjust the icon based on whether the channel is public or members-only
(the same we do in the channel list):
<img width="214" alt="Screenshot 2024-07-18 at 9 02 00 AM"
src="https://github.com/user-attachments/assets/973d83c5-f045-4282-a43a-18e12ce93f78">
The `read-only` and `disconnected` states are now also shown in a
visually different style than the channel name:
<img width="247" alt="Screenshot 2024-07-18 at 9 01 13 AM"
src="https://github.com/user-attachments/assets/359f61cf-3b80-4a3f-8948-d705f6c24695">
Release Notes:
- Refined the appearance of channel tabs.
This is a follow-up to #14666 in which I noticed that we don't need that
additional check, since each request will check whether it's supported
via the call to `check_capabilities` before sending the request.
Release Notes:
- N/A
Can't get to many of the settings on linux without opening it, and can't
know the default keystroke to get to it without knowing where to look
first, so its a chicken-n-egg problem of needing to use a
default-keystroke to set the key bindings, esp on linux.
Release Notes:
- N/A
---------
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
I decided to remove the GPUI APIs since `chrono` already provides this
functionality, and is already been used for this purpose in other parts
of the code (e.g.
[here](80402a6840/crates/zed/src/main.rs (L756))
or
[here](80402a6840/crates/ui/src/utils/format_distance.rs (L258)))
These usages end up calling the `time_format` crate, which takes in a
`UtcOffset`. It's probably cleaner to rewrite the crate to take in
`chrono` types, but that would require rewriting most of the code there.
Release Notes:
- linux: Use local time zone in chat and Git blame
This fixes https://github.com/zed-industries/zed/issues/13633 by not
sending `source.organizeImports` to the ESLint language server anymore.
Turns out that ESLint tells us through its capabilities that it doesn't
support that code action kind, but we ignored that.
What this code does is to check whether a given server supports specific
code action kinds.
It does this in two places:
1. When constructing the request: we now filter down the list of
requested `kinds`, in case we can do so. If we can't filter down the
list, we keep the previous behavior of sending the
`language_server.code_action_kinds()`
2. Before sending the request: we now check whether the server even
supports sending the request.
This fixes the issue by only sending actions to servers that support it.
I tested this with various language servers and setups and everything
still works (or works better). But of course there are a ton of
different combinations of language servers and code actions and file
types, so I couldn't test them all.
Release Notes:
- Fix ESLint language server adding comments on save if the
`source.organizeImports` code action was used on save. Zed now filters
out code actions sent to the language servers by checking whether they
are supported first.
([#13633](https://github.com/zed-industries/zed/issues/13633)).
Previously, when using Vim mode and doing a line-wise visual selection,
the `assistant: quote selection` action would not work correctly, since
it would ignore that these were line-wise selections.
With this change, one can now select lines using visual line mode and
"quote selection works"
Release Notes:
- Fixes `assistant: quote selection` not working correctly when making
visual-line-mode selections in Vim mode.
Fixes an issue in the serialization of workspaces that lead to incorrect
ordering of worktrees and refactors some other parts of the code to use
the new method.
Release Notes:
- N/A
This PR adds a streamlined way to consistently construct tab content for
items that only have textual content in the tabs.
The `Item` trait now has a new `tab_content_text` method that can be
used to return the textual content for the tab.
The `tab_content` method now has a default implementation that—unless
overridden—will construct a `Label` out of the text. This default
implementation also takes care of setting the label color based on the
active state of the tab, something that previously had to be repeated in
each `tab_content` implementation.
The majority of our tabs are now using `tab_content_text`.
Release Notes:
- N/A
This PR refactors the `set_active_pane_item` implementation for
`Breadcrumbs` to use an early return to avoid indenting the method body
more than necessary.
Release Notes:
- N/A
This PR improves the multibuffer hints added in #14668 to fix a few
issues.
The original implementation relied on bailing out early in `render` by
returning an `Empty` element. However, this had the unintended
side-effect that when initially opening a multibuffer (such as the
project search) there would be additional whitespace increasing the
height of the toolbar due to the empty element.
The reason we were doing this in the first place was because the hints
weren't updating when the item's breadcrumbs changed.
We're able to address this properly by using a subscription to the
item's events and recompute the visibility of the hint when the active
item's breadcrumbs change.
This also has the benefit of making the hints re-appear right away when
running the `welcome: reset hints` command with a multibuffer open.
Release Notes:
- N/A
Hi, this pull request adds support for `rubocop` language server. I
noticed that `ruby-lsp` LS is becoming more popular but it still lacks
diagnostics support in Zed. To cover that missing feature, it could be
good to use `rubocop` LS to show diagnostics alongside with the running
Ruby LSP.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
This PR updates the Danger rules to check for GitHub issue links that
aren't in the desired format:
<img width="916" alt="Screenshot 2024-07-17 at 5 11 48 PM"
src="https://github.com/user-attachments/assets/c77d3c28-3b09-44aa-a97f-03c2400df2e6">
We don't yet check that the links are exactly formatted as expected,
just that they aren't incorrectly formatted in the way that people
typically get it wrong.
Release Notes:
- N/A
This PR reworks the rendering for tab icons to allow us to render all of
the tab icons—not just file icons—in the tab's start slot.
The `Item` trait now has a separate `tab_icon` method that can be used
to indicate what icon should be shown for the tab.
Release Notes:
- N/A
This PR makes it so dev extensions that are installed are excluded when
checking for extension updates.
We don't want to accidentally clobber dev extensions if the upstream
extension is deemed more "up-to-date".
Release Notes:
- Changed dev extensions to be excluded from extension auto-updates.
This PR makes it so the icon of the shared screen tab is properly dimmed
when the tab is inactive.
Release Notes:
- Fixed an issue where the shared screen tab's icon would not render as
dimmed when the tab was inactive.
Co-Authored-By: Marshall <marshall@zed.dev>
Release Notes:
- Added a hint the first few times you open a multibuffer to explain
what is going on.
Co-authored-by: Marshall <marshall@zed.dev>
This adds the ability for Zed to restore unsaved buffers on restart. The
user is no longer prompted to save/discard/cancel when trying to close a
Zed window with dirty buffers in it. Instead those dirty buffers are
stored and restored on restart.
It does this by saving the contents of dirty buffers to the internal
SQLite database in which Zed stores other data too. On restart, if there
are dirty buffers in the database, they are restored.
On certain events (buffer changed, file saved, ...) Zed will serialize
these buffers, throttled to a 100ms, so that we don't overload the
machine by saving on every keystroke. When Zed quits, it waits until all
the buffers are serialized.
### Current limitations
- It does not persist undo-history (right now we don't persist/restore
undo-history regardless of dirty buffers or not)
- It does not restore buffers in windows without projects/worktrees.
Example: if you open a new window with `cmd-shift-n` and type something
in a buffer, this will _not_ be stored and you will be asked whether to
save/discard on quit. In the future, we want to fix this by also
restoring windows without projects/worktrees.
### Demo
https://github.com/user-attachments/assets/45c63237-8848-471f-8575-ac05496bba19
### Related tickets
I'm unsure about closing them, without also fixing the 2nd limitation:
restoring of worktree-less windows. So let's wait until that.
- https://github.com/zed-industries/zed/issues/4985
- https://github.com/zed-industries/zed/issues/4683
### Note on performance
- Serializing editing buffer (asynchronously on background thread) with
500k lines takes ~200ms on M3 Max. That's an extreme case and that
performance seems acceptable.
Release Notes:
- Added automatic restoring of unsaved buffers. Zed can now be closed
even if there are unsaved changes in buffers. One current limitation is
that this only works when having projects open, not single files or
empty windows with unsaved buffers. The feature can be turned off by
setting `{"session": {"restore_unsaved_buffers": false}}`.
---------
Co-authored-by: Bennet <bennet@zed.dev>
Co-authored-by: Antonio <antonio@zed.dev>
This PR reverts the changes to the Zig extension dependent on the new
`zed_extension_api` version so that we can publish the Zig extension.
Release Notes:
- N/A
This PR updates the PHP extension to use `intelephense` from the PATH,
if it exists.
Tested using the following Nix shell:
```sh
NIXPKGS_ALLOW_UNFREE=1 nix-shell -p php nodePackages_latest.intelephense
```
Resolves#11994.
Release Notes:
- N/A
This PR updates the `cli: install` message for Linux. It initially threw
me off thinking that because `path_for_auxiliary_executable` is not
implemented for Linux it's failing and I thought it's a bug. Turns out
the CLI gets installed by the package manager and it's just named
something else.
I ended up only updating the message so it's more clear. If you don't
like the message, let me know :)
The old message:
The new message:
@ConradIrwin thank you for taking the time and explaining it to me.
closes: #14118
Release Notes:
- N/A
Closes#14146. This is just for the time being before a networking
refactoring to split reads and writes on the ROUTER/DEALER ZeroMQ
sockets. Some kernels have not been responding with `kernel_info_reply`,
which ends up hanging our shell socket.
Release Notes:
- N/A
Release notes for the REPL feature will be part of its official launch.
This PR extends the PHP extension with
[Phpactor](https://github.com/phpactor/phpactor) support.
Phpactor seems to provide a better feature set out-of-the-box for free,
so it has been made the default PHP language server.
Thank you to @xtrasmal for informing us of Phpactor's existence!
Release Notes:
- N/A
Release Notes:
- N/A
---
I'd like to help improve Configuration documentation.
Currently I'm often confused by the configuration doc. It's incomplete:
not all settings are documented. It's disorganized: some options are
grouped together but overall there's not much structure or logic to it.
It's inconsistent: some examples show only key and value, some—just the
closes object, and others full nesting. It's confusing: individual keys
are listed but it's hard to understand where in the config structure
they belong.
I suggest the following changes:
- Always specify the full path of the setting
- Document all settings Zed recognises
- List settings in alphabetical order of their full path
- Always use full nesting in examples
This is an example, of what it might look like. It's first draft, too.
So I'm open to suggestions.
Please let me know if you're interested in this. The whole thing might
need a bit of effort so I'd like to know if this is something you might
want before doing all the work.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Allows Zed to open custom `zed://` links (redirects from
https://zed.dev/channels) on Linux used XDG MIME types.
This PR also allows the CLI to be able to open Zed (`zed://`) URIs
directly instead of executing the main executable in
`/usr/libexec/zed-editor`.
Release Notes:
- Linux: Allow `zed.dev/channel` (`zed://`) URIs to open on Linux
- CLI: Ability to open URIs from the command line
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Release Notes:
- Updated the Linux manual installation docs to fix windows not matching
with desktop icons
([#14435](https://github.com/zed-industries/zed/issues/14435)).
The automated `curl | bash` installation script already renames the
`zed.desktop` file to match the window, so most users will not be facing
this issue. This is only affecting users who have downloaded and
extracted the files following the manual instructions.
Since the app ID and the desktop file name are not the same, open
windows are not being matched with the desktop icons, therefore showing
a default one. This PR changes the documentation to tell users they
should rename the `.desktop` file to `dev.zed.Zed.desktop`, and
therefore match the automated install script.
Before:
After:
This PR fixes the exact extension filtering introduced in #14588.
As we traversed the extensions we were always updating `exact_match`,
regardless of whether it matched the extension ID from the filter.
Release Notes:
- N/A
Release Notes:
- remoting: An alpha version of remote development is now available to
everyone. For more information on how to use it, and limitations see
https://zed.dev/docs/remote-development.
This PR adds some telemetry when the "View docs" button is clicked on a
feature upsell.
The goal here is to get a sense for how effective these upsells are at
getting users to click through if they can't find what they're looking
for.
Release Notes:
- N/A
In #14567 I claimed that the underlying allocation is reused. And it
was. At the time I've submitted a PR I was using `.filter_map(|x| x)`,
which got flagged by clippy as something that could be simplified to
`.flatten()` - that however broke the allocation reuse promise.
Thus, this PR goes back to using `filter_map` and additionally in debug
builds it performs checks for allocation reuse. With .flatten in place,
a bunch of unit test fail on that branch, so the checks do work.
Release Notes:
- N/A
# Background
In https://github.com/zed-industries/zed/issues/14408 we received a
repro for "Replace all" being slow, even after the work I did
https://github.com/zed-industries/zed/pull/13654. Admittedly #13654 was
a pretty straightforward change.
Under the profiler it turned out that we're spending *10 seconds* in
`memmove` on main thread. Ugh. Not great. The direct ancestor of the
memmove call was
66f0c390a8/crates/editor/src/display_map/tab_map.rs (L108-L119)
What?
# Accidental O(n^2)
We have a bunch of `consolidate_*_edits` functions which take a list of
Fold/Tab/Inlay/Wrap edits and merge consecutive edits if their ranges
overlap/are next to one another. The loop usually goes as follows:
```
while ix < edits.len() {
let (prev_edits, next_edits) = edits.split_at_mut(ix);
let prev_edit = prev_edits.last_mut().unwrap();
let edit = &next_edits[0];
if PREV_EDIT_CAN_BE_MERGED_WITH_CURRENT_ONE {
MERGE_EDITS(prev_edit, edit);
edits.remove(ix); // !!
} else {
ix += 1;
}
}
```
The problem is the call to `.remove` - it has to shift all of the
consecutive elements in the `edits` vector! Thus, when processing the
edits from the original repro (where consolidation shrinks the edit list
from 210k entries to 30k), we mostly spend time moving entries in memory
around.
Thus, the original repro isn't really an issue with replace_all; it's
just that replace_all is one of the few tools available to the end user
that can apply large # of edits in a single transaction.
# Solution
In this PR I address the issue by rewriting the loop in a way that does
not throw items away via `.remove`. Instead, `Iterator::scan` is used,
which lets us achieve the same logic without having the pitfalls of
`.remove`s.
Crucially, **this code does not allocate a new backing buffer for
edits** (see [this article for
rationale](https://blog.polybdenum.com/2024/01/17/identifying-the-collect-vec-memory-leak-footgun.html));
with `vec.into_iter().scan().filter_map().collect()` we still use the
same underlying buffer as the one that's passed into `consolidate_*`
functions. In development I verified that by checking whether the
pointers to backing storage of a Vec are the same before and after the
consolidation.
# Results
### Before
Nightly 0.145.0
[66f0c390a8](66f0c390a8)
https://github.com/user-attachments/assets/8b0ad3bc-86d6-4f8a-850c-ebb86e8b3bfc
(~13s end-to-end)
### After
https://github.com/user-attachments/assets/366835db-1d84-4f95-8c74-b1506a9fabec
(~2s end-to-end)
The remaining lag is (I think) lies in `TextSummary` calculation and not
the consolidation itself. Thus, for the purposes of scoping this PR,
I'll tackle it separately.
Release Notes:
- Significantly improved performance of applying large quantities of
concurrent edits (e.g. when running "Replace all").
Turns out that the existing CI step for Nightly did create the licenses
and they have been baked into X86 builds ever since, because our
builders are stateful.
On ARM machines, the licenses wouldn't exist in the binary because we
called `script/generate-licenses` too late in `scripts/bundle-linux`,
after the binary had been created.
This removes the duplication and generates the licenses once, before the
binary is created.
Fixes#14302.
Release Notes:
- Fixed "View Dependency Licenses" (or `zed: open licenses`) crashing on
Linux ARM machines.
([#14302](https://github.com/zed-industries/zed/issues/14302)
Felt the link we were using for menu items that open a browser page was
not the best. That one is most typically used for attachments within
scope, as opposed to opening external links. Noticed that via the
"Copilot Settings" menu, which also felt like it could have a bit more
descriptive label. Also reduced the size of the rendered icon in this
component.
---
Release Notes:
- N/A
Release Notes:
- linux: Added a fallback Open picker for when XDG is not working
- Added a new setting `use_system_path_prompts` (default true) that can
be disabled to use Zed's builtin keyboard-driven prompts.
---------
Co-authored-by: Max <max@zed.dev>
This PR extends the extensions page with support for upselling built-in
Zed features when certain keywords are searched for.
This should help inform users about features that Zed has out-of-the-box
when they go looking for them as extensions.
For example, when someone searches "vim":
<img width="1341" alt="Screenshot 2024-07-15 at 4 58 44 PM"
src="https://github.com/user-attachments/assets/b256d07a-559a-43c2-b491-3eca5bff436e">
Here are more examples of what the upsells can look like:
<img width="1341" alt="Screenshot 2024-07-15 at 4 54 39 PM"
src="https://github.com/user-attachments/assets/1f453132-ac14-4884-afc4-7c12db47ad1d">
Release Notes:
- Added banners for built-in Zed features when corresponding keywords
are used in the extension search.
Provide a current, broken state as an experimental way to browse
diagnostics.
The diagnostics are grouped by lines and reduced into a block that, in
case of multiple diagnostics per line, could be toggled back and forth
to show more diagnostics on the line.
Use `grouped_diagnostics::Deploy` to show the panel.
Issues remaining:
* panic on warnings toggle due to incorrect excerpt manipulation
* badly styled blocks
* no key bindings to navigate between blocks and toggle them
* overall odd usability gains for certain groups of people
Due to all above, the thing is feature-gated and not exposed to regular
people.
Release Notes:
- N/A
TODO:
- [x] Actions run from menu not firing
- [x] Menu differentiates idle and busy for running kernel
Menu States:
- [x] No session && no support known
No session && no kernel installed for languages of known support
- (TODO after) Intro to REPL
- [x] Link to docs
No session but can start one
- [x] Start REPL
- (TODO after) More info -> Docs?
Yes Session
- [x] Info: Kernel name, language
example: chatlab-3.7-adsf87fsa (Python)
example: condapy-3.7 (Python)
- [x] Change Kernel -> https://zed.dev/docs/repl#change-kernel
- ---
- [x] Run
- [x] Interrupt
- [x] Clear Outputs
- ---
- [x] Shutdown
(Release notes left empty as the change will be documented in the REPL
release!)
Reserved for a follow on PR:
```
- [ ] Status should update when the menu is open (missing `cx.notify`?)
- [ ] Shutdown all kernels action
- [ ] Restart action
- [ ] [Default kernel changed - restart (this kernel) to apply] // todo!(kyle): need some kind of state thing that says if this has happened
```
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Kyle Kelley <rgbkrk@gmail.com>
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
- MacOS: Center the cursor in the visible area. `ctrl-l` (matches MacOS)
- Linux JetBrains: Scroll so cursor is at the Middle `ctrl-m`
- `editor::NextScreen` is not longer bound in any keymap by default (was
`ctrl-l` on MacOS)
Fixes#5247
Release Notes:
- Added support for following into the assistant panel.
---------
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Nathan <nathan@zed.dev>
Hello, I'm one of the maintainers of the Zed package on Terra. I made
the following changes:
- Mention the Terra stable package, instead of only preview and nightly.
- Link to sources for Terra packages instead of pkgs.org.
- Mention Ultramarine in addition to Fedora (one of Terra's targets).
Release Notes:
- N/A
Do not require the `prettier` dependency name to be in package.json's
[dev]Dependencies, instead just checking the `node_modules` contents.
Release Notes:
- Improved `prettier` detection to pick up its installation from
transitive dependencies
([12731](https://github.com/zed-industries/zed/issues/12731)
Currently deno lsp only works because deno have a workaround when it
detects deno.json it gets activated, but without a deno.json it won't
work
With this change now it works correctly regardless of a deno.json
presence, it only require enable:true:
```json
{
"lsp": {
"deno": {
"settings": {
"deno": {
"enable": true
}
}
}
}
}
```
Release Notes:
- Improved initial Deno set-up to enable it without explicit deno.json present in the file system
Follow-up of https://github.com/zed-industries/zed/pull/12909
* Fully preserve LSP data when sending it via collab, and only strip it
on the client.
* Avoid extra custom request handlers, and extend multi LSP server query
protocol instead.
Release Notes:
- N/A
Otherwise, ctrl-c makes them stuck being held from time to time
Follow-up of https://github.com/zed-industries/zed/pull/13898 that
reverts the macOS-related part of the PR.
Release Notes:
- N/A
This is a ~small~ pure refactor that's a step toward SSH remoting. I've
extracted the Project's buffer state management into a smaller, separate
struct called `BufferStore`, currently in the same crate. I did this as
a separate PR to reduce conflicts between main and `remoting-over-ssh`.
The idea is to make use of this struct (and other smaller structs that
make up `Project`) in a dedicated, simpler `HeadlessProject` type that
we will use in the SSH server to model the remote end of a project. With
this approach, as we develop the headless project, we can avoid adding
more conditional logic to `Project` itself (which is already very
complex), and actually make `Project` a bit smaller by extracting out
helper objects.
Release Notes:
- N/A
This PR updates the `/docs` slash command with basic globbing support
for expanding docs.
A `*` can be added to the item path to signify the end of a prefix
match.
For example:
```
# This will match any documentation items starting with `auk::`.
# In this case, it will pull in the docs for each item in the crate.
/docs docs-rs auk::*
# This will match any documentation items starting with `auk::visitor::`,
# which will pull in docs for the `visitor` module.
/docs docs-rs auk::visitor::*
```
https://github.com/user-attachments/assets/5e1e21f1-241b-483f-9cd1-facc3aa76365
Release Notes:
- N/A
This is a follow up of #14218 , since we open the window based on the
size of the client area, `window_bounds` should also return the size of
the client area to maintain consistency.
Release Notes:
- N/A
This PR improves the error message shown by the `/docs` slash command
when indexing fails due to the absence of `target/doc`.
We now distinguish between the overall `target/doc` directory missing
and an individual crate directory missing beneath it.
Release Notes:
- N/A
I don't intend fully on getting this merged, this is just an experiment
on using `direnv` directly without relying on shell-specific behaviours.
It works though, so this finally closes#8633
Release Notes:
- Fixed nushell not picking up `direnv` environments by directly
interfacing with it using `direnv export`
---------
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
With this setting, markdown files are one of the few that get a line
wrap indicator, a vertical line on the right, which confuses people.
Release Notes:
- N/A
This change pulls in https://github.com/kvark/blade/pull/135 and updates
the simplelog dependency for compatibility with that.
Release Notes:
- linux: Show link to troubleshooting docs when we can't open a window
This PR updates the `/docs` slash command to show a warning to the user
if a crate's docs cannot be indexed due to the target directory not
containing docs:
<img width="782" alt="Screenshot 2024-07-11 at 5 11 46 PM"
src="https://github.com/user-attachments/assets/2f54f7a1-97f4-4d2d-b51f-57ba31e50a2f">
Release Notes:
- N/A
This PR updates the `/docs` slash command to use a more generic icon to
convey docs.
It was still using the Rust icon, a relic of when it was still
`/rustdoc`.
Release Notes:
- N/A
Release Notes:
- vim: (BREAKING) Improved vim keymap contexts.
Previously `vim_mode == normal` was true even when operators were
pending, which led to bugs like #13789 and a requirement for custom
keymaps to exclude various conditions like (`!VimObject` and
`!VimWaiting`) to avoid bugs.
Now `vim_mode` will be set to `operator` or `waiting` in these cases as
described in [the docs](https://zed.dev/docs/vim#keybindings). For most
custom keymaps this change will be a no-op or an improvement, but if you
were deliberately relying on the old behaviour (if you were relying on
`VimObject` or `VimWaiting` becoming true) you will need to update your
keymap.
---------
Co-authored-by: Thorsten <thorsten@zed.dev>
# Issue
When a user does something that changes the cursor shape, such as when
switching between vim modes, there may be an up to 500ms (cursor blink
interval) delay until the user receives feedback for their action. This
happens when the shape change happens during the invisible phase of a
blink - the user will not see the cursor shape change until the next
phase, which could be 500ms away.
# Solution
Cursor shape changes should disrupt blinking by forcing the cursor to be
shown, this results in immediate feedback for shape changes. This is in
line with the behavior of other editors I've tried.
Release Notes:
- Improved visual feedback when changing cursor shape
When I implemented #13701, I kinda messed up with the reversed
selections, thinking that their anchors are flipped, so I flipped them
again. This caused the reverse selections to always be cleared
Release Notes:
- Fix reverse selections always being cleared, even if the right click
was performed inside
- Mostly just tweaking some design (colors & spacing) stuff
- Some small accessibility things—e.g., underline decoration for links
and one h1 only per page
- Most of the other captured changes are really just Prettier indenting
stuff
Release Notes:
- N/A
The underlying container had width of 0.75 rem, which was equal to 12px
at default ui_font_size. However, with larger values of ui_font_size the
scrollbar would drift towards the center of a project panel, as the
scrollbar itself has a fixed width of 12 pixels. This commit moves
towards using a fixed width of 12px for scrollbar container. The
alternative was to make the scrollbar scale with ui_font_size, but that
isn't what the Editor scrollbar does, so I decided against it.
Release Notes:
- Fixed position of scrollbar in project panel with non-default
`ui_font_size` values.
On macOS, when `terminal.option_as_meta` is enabled, pressing key
combinations like `option+b` and `option+f` would lead to both an escape
sequence being sent to the terminal (the expected behavior with
`option_as_meta == true`) AND a character being inserted (the behavior
when `option_as_meta == false`). Prevent the latter by stopping
propagation of the key-down event if it corresponds to a terminal escape
sequence and `option_as_meta` is enabled.
Fixes#7728
Release Notes:
- Fixed insertion of extra characters for some keystrokes if
`terminal.option_as_meta` is enabled
([#7728](https://github.com/zed-industries/zed/issues/7728)).
This let's GitHub and the Git cli optionally "skip" certain revs when
generating `git blame`.
Co-authored-by: Gilles Peiffer <gilles.peiffer.yt@gmail.com>
For: #13417
This is a simple version, I'm not sure if we just need to limit this
feature to vim mode, or maybe in normal editor mode, which involves
other logic like the location of the setting
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Release Notes:
- Fixed default font_family crash on Windows, use `Segoe UI`.
## Crash error message
```
thread 'main' panicked at crates\gpui\src\text_system.rs:150:9:
failed to resolve font 'Helvetica' or any of the fallbacks:
Zed Plex Mono, Helvetica, Cantarell, Ubuntu, Noto Sans, DejaVu Sans
```
Release Notes:
- N/A
----
Continue #14044 for Windows
## The problem
The `cx.open_window` method has provided us a `window_kind` option to
allows creating a Popup kind. This behavior can work on macOS, the popup
kind window have no-border, no-shadow, no-resize, and followed the
`is_movable` if present true it can't move.
This PR to fix those supports on Windows.
The border and shadow still exist, I have tried to use WS_POPUP
window_style, but it will crash:
> This is looks like complex, it is out of my known.
```
Blocking waiting for file lock on build directory
Compiling gpui v0.1.0 (F:\work\zed\crates\gpui)
Finished `dev` profile [unoptimized + debuginfo] target(s) in 13.96s
Running `target\debug\examples\window_positioning.exe`
thread 'main' panicked at F:\Users\jason\.cargo\git\checkouts\blade-b2bcd1de1cf7ab6a\21a56f7\blade-graphics\src\vulkan\init.rs:864:18:
called `Result::unwrap()` on an `Err` value: ERROR_OUT_OF_DEVICE_MEMORY
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
error: process didn't exit successfully: `target\debug\examples\window_positioning.exe` (exit code: 0xc0000409, STATUS_STACK_BUFFER_OVERRUN)
```
So I just make a simple change, to use `WS_EX_TOOLWINDOW` this can
disable resize, and connect `is_movable` to `handle_hit_test_msg` to
disable move, and also no Status Bar icon.
## Before
https://github.com/zed-industries/zed/assets/5518/76740a71-e0ba-401f-958d-f4afdeb417c6
## After
https://github.com/zed-industries/zed/assets/5518/dca49f13-914c-425a-b8b6-b9fc15f8d208
Here's a file of {{language_name}} that I'm going to ask you to make an edit to.
{{else}}
Here's a file of text that I'm going to ask you to make an edit to.
{{/if}}
{{#ifis_insert}}
The point you'll need to insert at is marked with <insert_here></insert_here>.
{{else}}
The section you'll need to rewrite is marked with <rewrite_this></rewrite_this> tags.
{{/if}}
<document>
{{{document_content}}}
</document>
{{#ifis_truncated}}
The context around the relevant section has been truncated (possibly in the middle of a line) for brevity.
{{/if}}
{{#ifis_insert}}
You can't replace {{content_type}}, your answer will be inserted in place of the `<insert_here></insert_here>` tags. Don't include the insert_here tags in your output.
Generate {{content_type}} based on the following prompt:
<prompt>
{{{user_prompt}}}
</prompt>
Match the indentation in the original file in the inserted {{content_type}}, don't include any indentation on blank lines.
Immediately start with the following format with no remarks:
```
{{INSERTED_CODE}}
```
{{else}}
Edit the section of {{content_type}} in <rewrite_this></rewrite_this> tags based on the following prompt:
<prompt>
{{{user_prompt}}}
</prompt>
{{#ifrewrite_section}}
And here's the section to rewrite based on that prompt again for reference:
<rewrite_this>
{{{rewrite_section}}}
</rewrite_this>
{{/if}}
Only make changes that are necessary to fulfill the prompt, leave everything else as-is. All surrounding {{content_type}} will be preserved.
Start at the indentation level in the original file in the rewritten {{content_type}}. Don't stop until you've rewritten the entire section, even if you have no more changes to make, always write out the whole section with no unnecessary elisions.
Immediately start with the following format with no remarks:
Your task is to map a step from the conversation above to suggestions on symbols inside the provided source files.
Guidelines:
- There's no need to describe *what* to do, just *where* to do it.
- If creating a file, assume any subsequent updates are included at the time of creation.
- Don't create and then update a file.
- We'll create it in one shot.
- Prefer updating symbols lower in the syntax tree if possible.
- Never include suggestions on a parent symbol and one of its children in the same suggestions block.
- Never nest an operation with another operation or include CDATA or other content. All suggestions are leaf nodes.
- Include a description attribute for each operation with a brief, one-line description of the change to perform.
- Descriptions are required for all suggestions except delete.
- When generating multiple suggestions, ensure the descriptions are specific to each individual operation.
- Avoid referring to the location in the description. Focus on the change to be made, not the location where it's made. That's implicit with the symbol you provide.
- Don't generate multiple suggestions at the same location. Instead, combine them together in a single operation with a succinct combined description.
Example 1:
User:
```rs src/rectangle.rs
struct Rectangle {
width: f64,
height: f64,
}
impl Rectangle {
fn new(width: f64, height: f64) -> Self {
Rectangle { width, height }
}
}
```
<step>Add new methods 'calculate_area' and 'calculate_perimeter' to the Rectangle struct</step>
<step>Implement the 'Display' trait for the Rectangle struct</step>
What are the suggestions for the step: <step>Add a new method 'calculate_area' to the Rectangle struct</step>
A (wrong):
{
"title": "Add Rectangle methods",
"suggestions": [
{
"kind": "AppendChild",
"path": "src/shapes.rs",
"symbol": "impl Rectangle",
"description": "Add calculate_area method"
},
{
"kind": "AppendChild",
"path": "src/shapes.rs",
"symbol": "impl Rectangle",
"description": "Add calculate_perimeter method"
}
]
}
This demonstrates what NOT to do. NEVER append multiple children at the same location.
A (corrected):
{
"title": "Add Rectangle methods",
"suggestions": [
{
"kind": "AppendChild",
"path": "src/shapes.rs",
"symbol": "impl Rectangle",
"description": "Add calculate area and perimeter methods"
}
]
}
User:
What are the suggestions for the step: <step>Implement the 'Display' trait for the Rectangle struct</step>
A:
{
"title": "Implement Display for Rectangle",
"suggestions": [
{
"kind": "InsertSiblingAfter",
"path": "src/shapes.rs",
"symbol": "impl Rectangle",
"description": "Implement Display trait for Rectangle"
You will be given a description of a command and you need to respond with a command that matches the description.
Do not include markdown blocks or any other text formatting in your response, always respond with a single command that can be executed in the given shell.
Current OS name is '{{os}}', architecture is '{{arch}}'.
{{#ifshell}}
Current shell is '{{shell}}'.
{{/if}}
{{#ifworking_directory}}
Current working directory is '{{working_directory}}'.
@@ -38,7 +38,7 @@ Considering these aspects will ensure our conversation view design is optimized
@nate> 2 feels like it isn't important at the moment, we can explore that later. Let's start with 4, which I think will lead us to discussion 3 and 5.
#zed share your thoughts on the points we need to consider to design a layout and visualization for a conversation view between you (#zed) and multuple peoople, or between multiple people and multiple bots (you and other bots).
#zed share your thoughts on the points we need to consider to design a layout and visualization for a conversation view between you (#zed) and multiple people, or between multiple people and multiple bots (you and other bots).
@nathan> Agreed. I'm interested in threading I think more than anything. Or 4 yeah. I think we need to scope the threading conversation. Also, asking #zed to propose the solution... not sure it will be that effective but it's worth a try...
.child(Label::new("To use Ollama models via the assistant, Ollama must be running on your machine with at least one model downloaded.").size(LabelSize::Large))
writeln!(prompt,"The context around the relevant section has been truncated (possibly in the middle of a line) for brevity.\n")?;
}
ifrange.is_empty(){
writeln!(
prompt,
"You can't replace {content_type}, your answer will be inserted in place of the `<insert_here></insert_here>` tags. Don't include the insert_here tags in your output.",
)
.unwrap();
writeln!(
prompt,
"Generate {content_type} based on the following prompt:\n\n<prompt>\n{user_prompt}\n</prompt>",
)
.unwrap();
writeln!(prompt,"Match the indentation in the original file in the inserted {content_type}, don't include any indentation on blank lines.\n").unwrap();
prompt.push_str("Immediately start with the following format with no remarks:\n\n```\n{{INSERTED_CODE}}\n```");
}else{
writeln!(prompt,"Edit the section of {content_type} in <rewrite_this></rewrite_this> tags based on the following prompt:'").unwrap();
writeln!(prompt,"Only make changes that are necessary to fulfill the prompt, leave everything else as-is. All surrounding {content_type} will be preserved.\n").unwrap();
write!(
prompt,
"Start at the indentation level in the original file in the rewritten {content_type}. "
)
.unwrap();
prompt.push_str("Don't stop until you've rewritten the entire section, even if you have no more changes to make, always write out the whole section with no unnecessary elisions.");
prompt.push_str("\n\nImmediately start with the following format with no remarks:\n\n```\n{{REWRITTEN_CODE}}\n```");
writeln!(&mutprompt,"You are an expert terminal user.").unwrap();
writeln!(&mutprompt,"You will be given a description of a command and you need to respond with a command that matches the description.").unwrap();
writeln!(&mutprompt,"Do not include markdown blocks or any other text formatting in your response, always respond with a single command that can be executed in the given shell.").unwrap();
ifletSome(shell)=shell{
writeln!(&mutprompt,"Current shell is '{shell}'.").unwrap();
self.handlebars
.lock()
.render("terminal_assistant_prompt",&context)
}
ifletSome(working_directory)=working_directory{
writeln!(
&mutprompt,
"Current working directory is '{working_directory}'."
@@ -55,7 +55,7 @@ impl SlashCommand for PromptSlashCommand {
self: Arc<Self>,
title: Option<&str>,
_workspace: WeakView<Workspace>,
_delegate: Arc<dynLspAdapterDelegate>,
_delegate: Option<Arc<dynLspAdapterDelegate>>,
cx: &mutWindowContext,
)-> Task<Result<SlashCommandOutput>>{
letSome(title)=titleelse{
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
