Fixes case when `package.json` is not in root directory.
Usually in mono repository, where multiple `package.json` may be present
Release Notes:
- Fixed runnable for package.json in monorepos
On X11 I was unable to type ä ü and other umlauts in files with
autoclose enabled, because typing ä requires me to hit
- compose key
- `"`
- `a`
When the `"` was typed, Zed would insert a matching `"` because it had a
selection around the dead-key that was inserted by the compose key.
We ran into a similar issue in #7611, but in the case of the Brazilian
keyboard, the `"` is the compose key so we didn't trigger the matching
`"`, because we didn't have a selection yet.
What this does is it fixes the issue by making the
surround-selection-with-quotes-or-brackets also depend on the autoclose
settings, which is didn't do before. This is a breaking change for users
of a Brazilian keyboard layout in which `"` cannot be used to surround
an existing selection with quotes anymore.
That _might_ be a change that users notice, but I can't think of
scenario for that where the user wants, say, `"` to be NOT autoclosed,
but work with selections. (Example is Markdown, for which autoclose for
`"` is disabled. Do we want that but allow surrounding with quotes?)
So it fixes the issue and makes the behavior slightly more consistent,
in my eyes.
Release Notes:
- Changed the behavior of surrounding selections with brackets/quotes to
also depend on the auto-close settings of the language. This is a
breaking change for users of a Brazilian keyboard layout in which `"`
cannot be used to surround an existing selection with quotes anymore.
Before:
[Screencast from 2024-06-04
11-49-51.webm](https://github.com/zed-industries/zed/assets/1185253/6bf255b5-32e9-4ba7-8b46-1e49ace2ba7c)
After:
[Screencast from 2024-06-04
11-52-19.webm](https://github.com/zed-industries/zed/assets/1185253/3cd196fc-20ba-465f-bb54-e257f7f6d9f3)
`base_keymap` is a property of `settings.json`, not `keymap.json`. If
you run "toggle base keymap selector" and select a particular editor,
you will notice that it places the `base_keymap` property in
`settings.json`.
Release Notes:
- N/A
This PR adds the `editor: toggle tab bar` action that hides / shows the
tab bar and updates the `tab_bar.show` setting in `settings.json`
accordingly.
First mentioned in
https://github.com/zed-industries/zed/pull/7356#issuecomment-2118445379.
Release Notes:
- Added the `editor: toggle tab bar` action.
This PR fixes an issue where the prompt library did not properly have
the UI font or rem size set.
Since it is being opened in a new window, we need to re-initialize these
values the same way we do in the main window.
Release Notes:
- N/A
Release Notes:
- Improved UX for the inline assistant. It will now automatically wrap
when the text gets too long, and you can insert newlines using
`shift-enter`.
This reverts commit 1a0708f28c since after
that, default task-related keybindings (alt-t and alt-shift-t) started
to leave `†` and `ˇ` symbols in the text editors before triggering
actions.
Release Notes:
- N/A
Supersedes https://github.com/zed-industries/zed/pull/12659
Fixes https://github.com/zed-industries/zed/issues/12588
One of Zed's core features is our collaboration software. As such, it is
important that we notify the user when their RPC protocol is out of
date, and how to update it. This PR adds a mechanism to replace the
existing auto updater with a message explaining how to update Zed for
this environment.
Release Notes:
- N/A
This PR removes the unused `examples` from the `html_to_markdown` crate.
I was just using these to dogfood the parsing initially, but now that
it's wired up in the Assistant, the examples are no longer useful.
Release Notes:
- N/A
Fixes#12585
This changes the expectations for installed binaries on linux based on
work
that @jirutka has done for Alpine.
In particular, we now put the cli in place as `bin/zed` and the zed
binary as
`libexec/zed-editor`, and assume that packagers do the same.
cc @someone13574
Release notes:
- N/A
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
This PR overhauls the HTML to Markdown conversion functionality in order
to make it more pluggable. This will ultimately allow for supporting a
variety of different HTML input structures (both natively and via
extensions).
As part of this, the `rustdoc_to_markdown` crate has been renamed to
`html_to_markdown`.
The `MarkdownWriter` now accepts a list of trait objects that can be
used to drive the conversion of the HTML into Markdown. Right now we
have some generic handler implementations for going from plain HTML
elements to their Markdown equivalents, as well as some rustdoc-specific
ones.
Release Notes:
- N/A
fixes#11829
In https://github.com/zed-industries/zed/pull/7494, we introduced IME
event buffering, so that we could preempt the IME with a keystroke event
in some cases. However, this caused a desynchronization bug in long
multi-step IME composition, such as the pre-edit used in the Japanese
Romaji keyboard (and other languages). We found that this was due to the
IME issuing actions, and then immediately querying the editor's state
before we had applied those actions. Therefore, this PR removes IME
action buffering.
We have tested all of the cases in the `handle_key_event` documentation
and added a few of our own.
Release Notes:
- Fixed an issue where the IME pre-edit could desynchronize from the
editor on macOS
([#11829](https://github.com/zed-industries/zed/pull/12651))
---------
Co-authored-by: Jan Solanti <jhs@psonet.com>
This could still use some improvement UI-wise but the user experience
should be a lot better.
- [x] Show in "Window" application menu
- [x] Load prompt as it's selected in the picker
- [x] Refocus picker on `esc`
- [x] When creating a new prompt, if a new prompt already exists and is
unedited, activate it instead
- [x] Add `/default` command
- [x] Evaluate /commands on prompt insertion
- [x] Autocomplete /commands (but don't evaluate) during prompt editing
- [x] Show token count using the settings model, right-aligned in the
editor
- [x] Picker
- [x] Sorted alpha
- [x] 2 sublists
- Default
- Empty state: Star a prompt to add it to your default prompt
- Otherwise show prompts with star on hover
- All
- Move prompts with star on hover
Release Notes:
- N/A
This PR adds a new `/fetch` slash command to the Assistant for fetching
the content of an arbitrary URL as Markdown.
Currently it's just using the same HTML to Markdown conversion that
`/rustdoc` uses, but I'll be working to refine the output to be more
widely useful.
Release Notes:
- N/A
Previously, we were:
- cancelling previous requests only after the latest one has completed
- always running the debounced documentation resolution to completion,
even when we had no need for it.
In this commit, we drop the ongoing completion requests as soon as the
new one is fired.
Fixes#5166
Release Notes:
- Improved performance and reliability of completions in large
Typescript projects
Co-authored-by: Bennet Bo <bennet@zed.dev>
Fixes https://github.com/zed-industries/zed/issues/10890
* removes `unwrap()` that caused panics for text elements with no text,
remaining after edit state is cleared but project entries are not
updated, having the fake, "new entry"
* improves discoverability of the FS errors during file/directory
creation: now those are shown as workspace notifications
* stops printing anyhow backtraces in workspace notifications, printing
the more readable chain of contexts instead
* better indicates when new entries are created as excluded ones
Release Notes:
- Improve excluded entry creation workflow in the project panel
([10890](https://github.com/zed-industries/zed/issues/10890))
This PR updates the background task used to fetch extensions from the
blob store to account for the possibility that the result set will be
paginated.
Will now paginate through all of the results and collect them up before
proceeding to determining which extensions need to be synced.
Release Notes:
- N/A
This PR updates the `/rustdoc` slash command to use local docs built
with `cargo doc`.
If the docs for a particular crate/module are available locally, those
will be used. Otherwise, it will fall back to retrieving the docs from
`docs.rs`.
The placeholder output for the slash command will indicate which source
was used for the docs:
<img width="289" alt="Screenshot 2024-06-03 at 4 13 42 PM"
src="https://github.com/zed-industries/zed/assets/1486634/729112e4-80ca-4f08-bdb3-88fc950351c3">
Release Notes:
- N/A
This PR removes some default language settings that are now provided by
their respective extensions.
In #10296 we added the ability for the language configuration within
extensions to provide certain language settings (e.g., `tab_size`).
New versions of the extensions have been published that take advantage
of that and have been in circulation for over a month now. To that end,
we no longer need these settings provided as defaults.
Release Notes:
- N/A
This PR adds default settings to disable `vtsls` by default so that
there aren't multiple TypeScript language servers running.
I also renamed the language server from `vtsls-language-server` to just
`vtsls`, since the `-language-server` suffix was redundant.
Release Notes:
- N/A
`[NSString UTF8String]` sometimes returns null (it's documented as
such), and when it does, zed crashes in `window::insert_text`. I'm
running into this sometimes when using alt-d to delete forward. It
usually only happens with multiple cursors, but sometimes with a single
cursor. It *might* only happen when using the "Unicode Hex Input"
keyboard 'Input Source' (which I started using to avoid entering weird
characters in zed when using emacs meta keybindings that I haven't
defined in zed).
When using the US English input source, alt-d always results in a call
to `insert_text`. When using the Unicode Hex Input source it usually
doesn't, but when it does `text.UTF8String()` returns null. `text` isn't
null. `[text length]` returns 1. `[text characterAtIndex: 0]` seems to
always return `56797` (an undefined utf-16 codepoint).
Release Notes:
- Fixed crash on mac when deleting with alt-d
Fixes multiple issues that prevented window bounds restoration to not
work on Wayland.
Note: Since the display uuid depends on the `wl_output.name` field, this
only works properly on KDE 5.26+ or Gnome 44+ ([kwin
commit](330a02d862),
[mutter](7e838b1115)).
Release Notes:
- N/A
You can opt into using VTSLS instead of typescript-language-server by
pasting the following snippet into your settings:
```
"languages": {
"TSX": {
"language_servers": [
"!typescript-language-server",
"vtsls-language-server"
]
}
},
```
Related to: #5166
Release Notes:
- Added support for using [vtsls](https://github.com/yioneko/vtsls)
language server for Typescript/Javascript.
This fixes#11236 by ignoring the `bounds.origin` values when the window
is only being resized.
The cause for the issue was that the `ConfigureNotify` event would
contain "wrong" values when the window was being resized (by dragging a
corner).
In my case it would *always* contain x:14/y:49, which is I think might
map to the origin of the top bar in GNOME.
We would then persist these wrong values when serializing the workspace.
On restart, we'd use these values and end up with the window decorations
in the wrong place.
What I still don't know:
1. What exactly the 14/49 map to, because it's not the origin of the top
bar in GNOME. I also tried the X11 TranslateCoordinates call but
couldn't get meaningful results back (even taking scale factor into
account).
2. Why the window decorations end up looking wrong vs. the window being
in the first place. But if you look at my screenshot in #11236, it looks
like the decorations are off exactly by 14/49px.
That being said, I think the solution here is a good one for now: we
don't do an additional X11 call and when we're resizing, we're not
interested in the origin changing.
Release Notes:
- N/A
Proof:
[Screencast from 2024-06-03
15-08-36.webm](https://github.com/zed-industries/zed/assets/1185253/90efccfc-8ec6-42d2-8380-1625eff57805)
Using the file system as a database seems like it's easy, but it's
actually a real pain. I'd like to use LMDB to store the prompts locally
so we have more control. We can always add an export option, but I want
the source of truth to be somewhere other than the file system.
So far, I have a PromptStore which is global to the application and can
be initialized on startup. Then there's a `PromptLibrary` which is
intended to be the root of a new kind of Zed window. I haven't actually
seen pixels yet, but I've sketched out the basics needed to create a new
prompt, save, etc.
Still lots to figure out but the foundations of being backed by a DB and
rendering in an independent window are in place.
/cc @iamnbutler @as-cii
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Also fix click handler for "Rerun last task".
Fixes#12580
Release Notes:
- Fixed click handler for "rerun last task" in task modal not working.
- Rebound "picker::UseSelectedQuery" from `opt-E` to `F2`.
@mrnugget spotted that tsconfig.json schema is getting applied on
current Nightly. I've tracked it down to a misconfiguration of JSON
language server. Mea culpa.
No release note as that change has not went out to the public yet.
Release Notes:
- N/A
This PR disables indent guides by default for single line editors. Right
now indent guides show up in the project search editor (which is only a
single line)
<img width="715" alt="image"
src="https://github.com/zed-industries/zed/assets/53836821/0b61da71-6f64-424d-9612-6a34eac4686a">
Release Notes:
- Fixed an issue where indent guides would show up in a single line
editor (e.g. project search, buffer search)
Indent guides can be configured per language, meaning that in a multi
buffer we can get excerpts where indent guides should be
disabled/enabled/styled differently than other excerpts.
Imagine the following scenario, i have indent guides disabled in my
settings, but want to enable them for JS and Python. I also want to use
a different line width for python files. Something like this is now
supported:
<img width="445" alt="image"
src="https://github.com/zed-industries/zed/assets/53836821/0c91411c-145c-4210-a883-4c469d5cb828">
And the relevant settings for the example above:
```json
"indent_guides": {
"enabled": false
},
"languages": {
"JavaScript": {
"indent_guides": {
"enabled": true
}
},
"Python": {
"indent_guides": {
"enabled": true,
"line_width": 5
}
}
}
```
Release Notes:
- Respect language specific settings when showing indent guides in a
multibuffer
- Fixes an issue where indent guide specific settings were not
recognized when specified in local settings
Add runnable tasks for Python, starting with `unittest` from the
standard library. Both `TestCase`s (classes meant to be a unit of
testing) and individual test functions in a `TestCase` will have
runnable icons. For completeness, I also included a task that will run
`unittest` on the current file.
The implementation follows the `unittest` CLI. The unittest module can
be used from the command line to run tests from modules, classes or even
individual test methods:
```
python -m unittest test_module.TestClass
python -m unittest test_module.TestClass.test_method
```
```python
import unittest
class TestStringMethods(unittest.TestCase):
def test_upper(self):
self.assertEqual('foo'.upper(), 'FOO')
def test_isupper(self):
self.assertTrue('FOO'.isupper())
self.assertFalse('Foo'.isupper())
def test_split(self):
s = 'hello world'
self.assertEqual(s.split(), ['hello', 'world'])
# check that s.split fails when the separator is not a string
with self.assertRaises(TypeError):
s.split(2)
if __name__ == '__main__':
unittest.main()
```
From the snippet provided by `unittest` docs, a user may want to run
test_split independently of the other test functions in the test case.
Hence, I decided to make each test function runnable despite `TestCase`s
being the unit of testing.
## Example of running a `TestCase`
<img width="600" alt="image"
src="https://github.com/zed-industries/zed/assets/16619392/7be38b71-9d51-4b44-9840-f819502d600a">
## Example of running a test function in a `TestCase`
<img width="600" alt="image"
src="https://github.com/zed-industries/zed/assets/16619392/f0b6274c-4fa7-424e-a0f5-1dc723842046">
`unittest` will also run the `setUp` and `tearDown` fixtures.
Eventually, I want to add the more commonly used `pytest` runnables
(perhaps as an extension instead).
Release Notes:
- Added runnable tasks for Python `unittest`.
([#12080](https://github.com/zed-industries/zed/issues/12080)).
This commit also removes a bunch of dead code.
Fixes#12544
Release Notes:
- Removed branch popover menu - clicking on the branch name in left-hand
corner now always opens a branch modal
# Summary
Hi. Current `heredoc` injection for Ruby language captures the
`heredoc_end` token. That's a bit incorrect because we want to capture
the content only. Suppose we have the following Ruby code:
```ruby
<<~JS
function myFunc() {
const myConstant = [];
}
let a = '1'
JS
```
And this is its syntax tree:
```
[program] [0, 0] - [7, 0]
[heredoc_beginning] [0, 0] - [0, 5]
[heredoc_body] [0, 5] - [6, 2]
[heredoc_content] [0, 5] - [6, 0]
[heredoc_end] [6, 0] - [6, 2]
```
Current injection capture all content of the `heredoc_body`:
But we want to capture the `heredoc_content` only and this PR resolves
that, additionally it downcases the language like Zed does in other
languages like Terraform.
Release Notes:
- N/A
This PR fixes the location of the `injections.scm` query within the Ruby
extension.
Same as #12532, but without the content changes to `injections.scm`.
Release Notes:
- N/A
$ZED_SYMBOL doesn't really work here once that will try to do something
like this:
mix test MyModule.MyModuleTest
instead of using the path of the file:
mix test test/my_module/my_module_test.exs
Release Notes:
- Fix mix test $ZED_SYMBOL to use ZED_RELATIVE_FILE instead
- Use ZED_RELATIVE_FILE instead of ZED_FILE to improve mix tasks results
on Elixir umbrella projects
Fixed bug introduced in:
https://github.com/zed-industries/zed/pull/12502
Filtering before `enumerate` call breaks project order and instead of
hiding current project it hides some other project.
Release Notes:
- N/A
When indent guides were still WIP, I thought it might be a good idea to
detect the tab size for every line individually, so we can handle files
with mixed indentations. However, while optimizing the performance of
indent guides I found that getting the language at a given anchor was
pretty expensive, therefore I only resolved the language for the first
visible row. However, this could lead to some weird flickering, where
the indent guides would use different tab sizes depending on the first
visible row (see #12492). This can be fixed by just using the primary
buffer language size.
So as of right now indent guides cannot handle files with mixed
indentations. Im not sure if anyone actually does/expects this, but one
use case I could imagine is something like this:
User x has a svelte file, where the tab size is set to `4`. However the
svelte code uses typescript inside a script tag, which User x wants to
use a tab size of `2`. The approach used here would not work for this,
but then again I think our formatter does not even support something
like this. Im probably overcomplicating things, so let's stick with the
simple solution for now.
Release Notes:
- Fixed an issue where indent guides would use an incorrect tab size
([#12492](https://github.com/zed-industries/zed/issues/12492)).
This PR fixes a small issue in `rustdoc_to_markdown` where we could push
a blank space after a newline, leading to an unwanted leading space.
Release Notes:
- N/A
#### Lazily loading channels
I've added a new RPC message called `SubscribeToChannels` that the
client now sends when it first renders the channels panel. This causes
the server to load the channels for that client and send updates to that
client as channels are updated. Previously, the server did this upon
connection.
For backwards compatibility, the server will inspect clients' version,
and continue to do this work immediately for old clients.
#### Optimizations
Running collab locally, I realized that upon connecting, we were running
two concurrent transactions that *both* queried the `channel_members`
table: one for loading your channels, and one for loading your channel
invites. I've combined these into one query. In addition, we now use a
join to load channels + members, as opposed to two separate queries.
Even though `where id in` is efficient, it adds an extra round trip to
the database, keeping the transaction open for slightly longer.
Release Notes:
- N/A
This PR improves `rustdoc_to_markdown`'s paragraph handling to produce
better output.
Specifically, there should now be fewer instances where a space is
missing between words as the result of line breaks in the source HTML.
Release Notes:
- N/A
This PR adds some helper methods to `HtmlElement` to make it easier to
interact with the element's attributes.
This cleans up a bunch of the code by a fair amount.
Release Notes:
- N/A
Previously, each git `Repository` object was held inside of a mutex.
This was needed because libgit2's Repository object is (as one would
expect) not thread safe. But now, the two longest-running git operations
that Zed performs, (`status` and `blame`) do not use libgit2 - they
invoke the `git` executable. For these operations, it's not necessary to
hold a lock on the repository.
In this PR, I've moved our mutex usage so that it only wraps the libgit2
calls, not our `git` subprocess spawns. The main user-facing impact of
this is that the UI is much more responsive when initially opening a
project with a very large git repository (e.g. `chromium`, `webkit`,
`linux`).
Release Notes:
- Improved Zed's responsiveness when initially opening a project
containing a very large git repository.
This PR sorts the `file_types.json` file alphabetically.
This is the command I used to sort it:
```
pnpm --package=json-sort-cli dlx jsonsort assets/icons/file_icons/file_types.json
```
Release Notes:
- N/A
When running the tests for linux, I found a lot of benign errors getting
logged. This PR cuts down some of the noise from unnecessary workspace
serialization and SVG renders
Release Notes:
- N/A
This PR fixes an issue in `rustdoc_to_markdown` with code blocks being
trimmed incorrectly.
We were erroneously popping from the current element stack even if we
didn't push an element onto the stack.
Added test coverage for this case as well, so we don't regress.
Release Notes:
- N/A
This is still pretty raw, so I'd like to hold off on shipping it to all
users.
Release Notes:
- Hide the prompt library for non-staff until it is in a more complete
state.
This PR adds a `/rustdoc` slash command for retrieving and inserting
rustdoc docs into the Assistant.
Right now the command accepts the crate name as an argument and will
return the top-level docs from `docs.rs`.
Release Notes:
- N/A
I realized that somehow, the `git` executable is able to compute `git
status` much more quickly than libgit2, so I've switched our git status
logic to use `git`. Follow-up to
https://github.com/zed-industries/zed/pull/12266.
Release Notes:
- Improved the performance of git status updated when working in large
git repositories.
- Added support for xdg trash when deleting files on linux
- moved ashpd depency to toplevel to use it in both fs and gpui
If I need to add test, or change anything, please let me know. I tested
locally by creating and deleting a file and confirming it showed up in
my trashcan, but that probably a less than ideal method of confirming
correct behavior
Also, I could remove the delete directory function for linux, and change
the one configured for macos to compile for both macos and linux (they
are the same, the version of the function they are calling is
different).
Release Notes:
- N/A
This PR adds a new crate for converting rustdoc output to Markdown.
We're leveraging Servo's `html5ever` to parse the Markdown content, and
then walking the DOM nodes to convert it to a Markdown string.
The Markdown output will be continued to be refined, but it's in a place
where it should be reasonable.
Release Notes:
- N/A
Release Notes:
- Fixed an issue where expanded hunks could be rendered at the wrong
position when zooming
- Fixed an issue where expanded hunks could be rendered at the wrong
position when toggling git blame
([#11941](https://github.com/zed-industries/zed/issues/11941))
Partially fixes#5119
TODO:
- [ ] Change cursor style to Copy when dragging an entry with opt
pressed.
Release Notes:
- Drag-and-dropping a project panel entry with opt modifier pressed now
copies the entry instead of moving it.
This pull request fixes two issues in `RateLimiter` that caused
excessive rate-limiting to take place:
- c19083a35c fixes a mistake that caused
us to load buckets from the database incorrectly and set the
`refill_time_per_token` to equal the `refill_duration`. This was the
primary reason why rate limiting was acting oddly.
- 34b88d14f6 fixes another slight logic
error that caused tokens to be underprovisioned. This was minor compared
to the bug above.
Release Notes:
- N/A
We should reintroduce this as part of the prompt library.
Release Notes:
- Removed an over-eager system prompt from the assistant that was
causing misbehavior. Going forward, our intent is to always let you
observe and edit text before we send it.
---------
Co-authored-by: Marshall <marshall@zed.dev>
This PR changes the default value of the `calls.share_on_join` setting
from `true` to `false`.
Nathan mentioned that project sharing should be opt-in so that projects
aren't shared unless you intend for them to be.
Release Notes:
- Changed the default `calls.share_on_join` value to `false`.
Release Notes:
- Added support for `background_color` in `syntax` map in `theme.json`.
This adds support for setting a `background_color` for styles inside the
`syntax` map for themes defined in `theme.json`. The field is optional
so there should be no backwards compatibility issues.
It is worth noting that the current behaviour for selecting text is that
the background colours will mix/blend (I'm not sure the correct term
here). Changing this behaviour, or making it configurable, looks to be a
far more complex issue and I'm not sure I know how to do it.
This PR updates the Elixir docs with a note on how to switch to using
other language server.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
This PR fixes a small issue in the Ruby docs, where we weren't properly
demonstrating that `solargraph` should be disabled when enabling
`ruby-lsp`.
Release Notes:
- N/A
* Start with a longer duration
* Widen the range used for randomizing the duration between retries
* Increase the maximum duration between retries
Release Notes:
- N/A
Release Notes:
- N/A
Picks up https://github.com/kvark/blade/pull/118Fixes#10351
Seeing that Zed loaded with Blade repository is consuming 260Mb of RAM.
We can tune this to be lower, but ultimately it doesn't matter: this
memory isn't wasted, it's just pools for memory and descriptors, which
may be used by bigger and more complex views of Zed.
ping #6687
This is the third iteration of this PR ([v2
here](https://github.com/zed-industries/zed/pull/11949)) and uses a
different approach to the first two (the process wrapper lib was a
maintainability nightmare). While the first two attempted to spawn the
necessary processes using flatpak-spawn and host-spawn from the app
inside the sandbox, this version first spawns the cli binary which then
restart's itself *outside* of the sandbox using flatpak-spawn. The
restarted cli process than can call the bundled app binary normally,
with no need for flatpak-spawn because it is already outside of the
sandbox. This is done instead of keeping the cli in the sandbox because
ipc becomes very difficult and broken when trying to do it across the
sandbox.
Gnome software (example using nightly channel and release notes
generated using the script):
<img
src="https://github.com/zed-industries/zed/assets/81528246/6391d217-0f44-4638-9569-88c46e5fc4ba"
width="600"/>
TODO in this PR:
- [x] Bundle libs.
- [x] Cleanup release note converter.
Future work:
- [ ] Auto-update dialog
- [ ] Flatpak auto-update (complete 'Auto-update dialog' first)
- [ ] Experimental
[bundle](https://docs.flatpak.org/en/latest/single-file-bundles.html)
releases for feedback (?).
*(?) = Maybe / Request for feedback*
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
- Confirming a completion now runs the command immediately
- Hitting `enter` on a line with a command now runs it
- The output of commands gets folded away and replaced with a custom
placeholder
- Eliminated ambient context
<img width="1588" alt="image"
src="https://github.com/zed-industries/zed/assets/482957/b1927a45-52d6-4634-acc9-2ee539c1d89a">
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Adds the following features to the prompt manager:
- New prompt – Create a new prompt from the UI. It will only persist if
it is saved.
- Save prompt – Save a prompt by clicking the save button in the UI. A
keybinding will be added for this in the future.
- Reveal prompt - Show the selected prompt on the file system. Only
available for saved prompts.
New prompts that are saved will use the
`{slugified_title}_{ver}_{id}.md` format which all imported prompts will
move to in the near future.
Also orders prompts in alphabetical order by default.
Release Notes:
- N/A
/cc @RemcoSmitsDev new task indicators weren't showing for me in JSON
files.
`tasks.json` of native grammars is not being read by anything by
default, so we tend to register tasks as Rust structs, foregoing the
deserialization step. This doesn't apply to tasks registered in
extensions, which have to have tasks.json.
Release Notes:
- N/A
Release Notes:
- N/A
Fixes#12198 and some minor fixes:
* IBus was intercepting normal keys like `a`, `k` which caused some
problems in vim mode.
* Wayland: Trying to commit the pre_edit on click wasn't working
properly, should be fixed now.
* X11: The pre_edit was supposed to be cleared when losing keyboard
focus.
* X11: We should commit the pre_edit on click.
---------
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
The method has been tested on:
- Gnome 46 (Working)
- Gnome 40 (Not supported)
Tasks
- [x] Implements a draft which get and provides the user theme to
components which needs it
- [x] Implements a way to call the callback function when the theme is
updated
- [X] Cleans the code
Release notes:
- N/A
There were two issues:
1. the `ModifiersChanged` event was never emitted on windows.
macOS, x11 and wayland have separate events for this, while on windows
they are sent via the usual `keyup` and `keydown` events, but
`parse_keydown_msg_keystroke` just ignored them.
2. the word segmenting regex didn't include '\' so paths weren't
correctly detected
fixes https://github.com/zed-industries/zed/issues/12321
Release Notes:
- N/A
Running the tests on windows currently fails for every gpui test using
the `TestPlatform` with
```rs
called `Result::unwrap()` on an `Err` value: CoInitialize has not been called. (0x800401F0)
```
trying to call `CoCreateInstance`in the `DirectWriteComponent`.
The `WindowsPlatform` calls
[`OleInitialize`](https://learn.microsoft.com/de-de/windows/win32/api/ole2/nf-ole2-oleinitialize)
which internally calls `CoInitializeEx` so I just copied that to the
`TestPlatform`.
Release Notes:
- N/A
At the current moment, the "Reveal in Finder" behavior on Windows
"opens" the file using direct execution. This causes files to be opened
with whatever software they are associated with (i.e. will open Sublime
Text instead of the file explorer).
Release Notes:
- Fixed "Reveal in Finder" on Windows to open with the File Explorer.
The new behavior always opens the file explorer with the target
folder/file pre-selected.
https://github.com/zed-industries/zed/assets/28355157/b8ba471d-2f5b-4529-90c3-4dc59f308b99
This (mostly) allows the CSD added in
https://github.com/zed-industries/zed/pull/11525 to work in X11. It's
still a bit buggy as it detects a second window drag right after the
first one finishes, but it's probably better to change the way window
drags are detected in the title bar itself (as that causes other
issues).
The CSD can be tested by changing the return value of
`should_render_window_controls` to true.
Also fixes F11 crashing.
Release Notes:
- N/A
Upper before this PR, lower after.
This PR manually applies a MSAA to the font atlas. Before this PR, the
font may seem aliased ( espeacially on low DPI monitors ), that's
because `DirectWrite` and `CoreText` ( on which currently `Zed` built
the whole text system ) uses different anti-aliasing strategy. The
different anti-aliasing approach used by `DirectWrite` and `CoreText`:
The upper is `VSCode` font rendering result, middle `macOS`, lower this
PR ( pic captured with same font face, same font size, same DPI, same
physical resolution, same editor theme, and same magnification rate ).
This PR brings a quality similiar to `CoreText`. What's more, from the
`VSCode` image, you can see how `DirectWrite` sub-pixel anti-aliasing is
performed on the edge of the glyph. Can we achieve the same rendering
quality? Currently, No. `Zed` use a grayscale image to render glyph, and
a sub-pixel anti-aliasing `DirectWrite` requires all RGB channels and
the foreground color of the rendering glyph, which `Zed` dose not
provide.
So, to achieve the quality of `VSCode` font rendering, the text system
of `Zed` needs much much more efforts to refactor the codes.
Release Notes:
- N/A
Release Notes:
- Improved expand excerpt indicators to allow unidirectional expansion.
Also added the `editor::ExpandExcerptsUp` and
`editor::ExpandExcerptsDown` actions, which can both take a `lines`
parameter. Also added a `expand_excerpt_lines` setting which controls
the default number of lines that the indicators and actions use.
---------
Co-authored-by: conrad <conrad@zed.dev>
Rust recently got the ability to check for typos or errors in `cfg`
attributes: https://blog.rust-lang.org/2024/05/06/check-cfg.html
This PR fixes the new warnings.
- gpui can be run with `RUSTFLAGS="--cfg gles"`, make this explicit in
`[workspace.lints.rust]`
- `cfg!(any(test, sqlite))` was just a bug, it should be
`feature(sqlite)`
- the `languages` crate had a `#[cfg(any(test, feature =
"test-support"))]` function without ever declaring the `test-support`
feature
- the `MarkdownTag` enum had a `cfg_attr` for serde without actually
having serde support
Now the only warnings when building are unused fields
`InlayHover.excerpt`, `SavedConversationMetadata.path` ,
`UserTestPlan.allow_client_reconnection` and `SyntaxMapCapture.depth`.
Release Notes:
- N/A
This PR replaces an `expect` with a precondition check to avoid a panic
if the `LspAdapterDelegate` isn't set when invoking a slash command.
Release Notes:
- N/A
Mostly tiny stuff. Quick run-down of the changes:
- Using `*Note*` instead of `NOTE` for the blockquote callouts
(piggybacking from https://github.com/zed-industries/zed/pull/11724)
- Use hyphens for bullet lists instead of asterisks
- Capitalize every (applicable) mention to Zed
- Capitalize mentions of other products (e.g., google cloud → Google
Cloud)
- Swap e.g. → for example — for clarity (latinisms may be unfamiliar for
some non-native English speakers, surprisingly!)
Release Notes:
N/A
Due to lifetime extension rules, we were holding onto the request
handler map mutex during parsing of the request itself. This had no
grand repercussions; it only prevented registering a handler for next
request until parsing of the previous one was done.
Release Notes:
- N/A
Follow-up of
https://github.com/zed-industries/zed/pull/12095#issuecomment-2123230762
reverting back part of https://github.com/zed-industries/zed/pull/11558
that was related to `language.toml` parsing.
Now all extensions that define `prettier_parser_name` in their language
configs, will enable formatting untitled buffers without any extra
language settings like
```json
{
"languages": {
"JSON": {
"prettier": {
"allowed": true,
"parser": "json"
}
}
}
}
```
Release Notes:
- Improved ergonomics of untitled buffer formatting with prettier, no
extra language settings are needed by default.
Fixes https://github.com/zed-industries/zed/issues/9575
Fixes https://github.com/zed-industries/zed/issues/4294
### Problem
When a large git repository's `.git` folder changes (due to a `git
commit`, `git reset` etc), Zed needs to recompute the git status for
every file in that git repository. Part of computing the git status is
the *unstaged* part - the comparison between the content of the file and
the version in the git index. In a large git repository like `chromium`
or `linux`, this is inherently pretty slow.
Previously, we performed this git status all at once, and held a lock on
our `BackgroundScanner`'s state for the entire time. On my laptop, in
the `linux` repo, this would often take around 13 seconds.
When opening a file, Zed always refreshes the metadata for that file in
its in-memory snapshot of worktree. This is normally very fast, but if
another task is holding a lock on the `BackgroundScanner`, it blocks.
### Solution
I've restructured how Zed handles Git statuses, so that when a git
repository is updated, we recompute files' git statuses in fixed-sized
batches. In between these batches, the `BackgroundScanner` is free to
perform other work, so that file operations coming from the main thread
will still be responsive.
Release Notes:
- Fixed a bug that caused long delays in opening files right after
performing a commit in very large git repositories.
Moved some things around so prompts now always have front-matter to
return, either by creating a prompt with default front-matter, or
bailing earlier on importing the prompt to the library.
In the future we'll improve visibility of malformed prompts in the
`prompts` folder in the prompt manager UI.
Fixes:
- Prompts inserted with the `/prompt` command now only include their
body, not the entire file including metadata.
- Prompts with an invalid title will now show "Untitled prompt" instead
of an empty line.
Release Notes:
- N/A
This PR adds initial support for defining slash commands for the
Assistant from extensions.
Slash commands are defined in an extension's `extension.toml`:
```toml
[slash_commands.gleam-project]
description = "Returns information about the current Gleam project."
requires_argument = false
```
and then executed via the `run_slash_command` method on the `Extension`
trait:
```rs
impl Extension for GleamExtension {
// ...
fn run_slash_command(
&self,
command: SlashCommand,
_argument: Option<String>,
worktree: &zed::Worktree,
) -> Result<Option<String>, String> {
match command.name.as_str() {
"gleam-project" => Ok(Some("Yayyy".to_string())),
command => Err(format!("unknown slash command: \"{command}\"")),
}
}
}
```
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/12234 by making both
default keymap and the menu `Delete` action declarations to have the
same `skip_prompt` value.
`Trash` action got more explicit `skip_prompt` declarations in this PR,
but those were the defaults already, so not changed.
Now, `Delete` action in the project panel will always show a prompt
before removing, both on the keystroke and menu item click.
To note, VSCode does skips prompt for the `Trash` action, so we might
want to change that too (later?), the PR does not alter it.
Release Notes:
- Shows Delete action binding keys in the project panel context menu
([12234](https://github.com/zed-industries/zed/issues/12234))
In #12003 we found ourselves in need for precise region tracking in
which a given runnable has an effect in order to grab variables from it.
This PR makes it so that in task modal all task variables from queries
overlapping current cursor position.
However, in the process of working on that I've found that we cannot
always use a top-level capture to represent the full match range of
runnable (which has been my assumption up to this point). Tree-sitter
captures cannot capture sibling groups; we did just that in Rust
queries.
Thankfully, none of the extensions are affected as in them, a capture is
always attached to single node. This PR adds annotations to them
nonetheless; we'll be able to get rid of top-level captures in extension
runnables.scm once this PR is in stable version of Zed.
Release Notes:
- N/A
This PR extracts the `SlashCommand` trait (along with the
`SlashCommandRegistry`) from the `assistant` crate.
This will allow us to register slash commands from extensions without
having to make `extension` depend on `assistant`.
Release Notes:
- N/A
Release Notes:
- Added ZED_RELATIVE_FILE (path to current file relative to worktree
root) and ZED_DIRNAME (path to the directory containing current file)
task variables.
The default keymap uses alt-enter for `SelectAllMatches` for `context:
BufferSearchBar`.
Jetbrains keymap uses alt-enter for `ToggleCodeActions` for `context:
Editor`.
When focusing on search bar, currently alt-enter does not perform
`SelectAllMatches`, whereas `ToggleCodeActions` is triggered instead,
because search bar's text input element has `context: Editor
mode=single_line`.
This PR restricts `ToggleCodeActions` to `Editor (full mode)` context to
allow `SelectAllMatches` to be triggered for alt-enter when the search
bar is active.
Release Notes:
- Fixed alt-enter with JetBrains keymap ignoring `search::SelectAllMatches` in certain contexts ([11840](https://github.com/zed-industries/zed/issues/11840))
Highlight files ending in `mdwn` as Markdown.
(Ikiwiki uses `mdwn` as the file extension for Markdown.)
This pull request was inspired by this one:
- #1209/
Release Notes:
- Added ".mdwn" as a Markdown file extension.
Release Notes:
- vim: Added `]d/[d` for go to prev/next diagnostic
- vim: Added `]c/[c` to go to prev/next git change (`:diff` and
`:revert` show the diff and revert it)
- vim: Added `g cmd-d` for go to implementation
This pull request replaces the static `⋯` character we used to insert
when folding a range with a custom render function that return an
`AnyElement`. We plan to use this in the assistant, but for now this
should be behavior-preserving.
Release Notes:
- N/A
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Conrad <conrad@zed.dev>
This PR updates the Gleam runnables to detect tests using the `describe`
API in Startest.
This isn't entirely functional yet, as it is still just uses the test
function name to run the tests (which Startest doesn't yet support).
Release Notes:
- N/A
This PR fixes some issues preventing `rustfmt` from running properly in
`dev_servers.rs`.
The culprit was some long strings being inlined.
Release Notes:
- N/A
Builds on top of existing work from #2249, but here's a showcase:
https://github.com/zed-industries/zed/assets/53836821/4b346965-6654-496c-b379-75425d9b493f
TODO:
- [x] handle line wrapping
- [x] implement handling in multibuffer (crashes currently)
- [x] add configuration option
- [x] new theme properties? What colors to use?
- [x] Possibly support indents with different colors or background
colors
- [x] investigate edge cases (e.g. indent guides and folds continue on
empty lines even if the next indent is different)
- [x] add more tests (also test `find_active_indent_index`)
- [x] docs (will do in a follow up PR)
- [x] benchmark performance impact
Release Notes:
- Added indent guides
([#5373](https://github.com/zed-industries/zed/issues/5373))
---------
Co-authored-by: Nate Butler <1714999+iamnbutler@users.noreply.github.com>
Co-authored-by: Remco <djsmits12@gmail.com>
This PR updates the Zig extension to pin ZLS to v0.11.0, as the more
recent releases of ZLS don't have `.tar.gz` assets available.
Note that this depends on the next version of the `zed_extension_api`,
which has yet to be released.
Release Notes:
- N/A
This PR adds a new `github_release_by_tag_name` method to the
`zed_extension_api` to allow for retrieving a GitHub release by its tag
name.
Release Notes:
- N/A
This PR restricts usage of v0.0.7 of the `zed_extension_api` to dev
builds, for now.
As we're still making changes to it, we don't want to ship a version of
Zed to Preview/Stable that claims to support a yet-unreleased version of
the extension API.
Release Notes:
- N/A
This PR forks a new version of the `zed_extension_api` in preparation
for some upcoming changes that require breaking changes to the WIT.
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
This PR replaces references to `language_overrides` in the docs with
just `languages`.
`language_overrides` is an alias for `languages`, and we want to move
towards just using `languages`.
Release Notes:
- N/A
Restructure prompts & the prompt library.
- Prompts are now written in markdown
- The prompt manager has a picker and editable prompts
- Saving isn't wired up yet
- This also removes the "Insert active prompt" button as this concept doesn't exist anymore, and will be replaced with slash commands.
I didn't staff flag this, but if you do play around with it expect it to still be pretty rough.
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <1789+nathansobo@users.noreply.github.com>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Tasks
* [x] remove old flaps and output when editing a slash command
* [x] the completing a command name that takes args, insert a space to
prepare for typing an arg
* [x] always trigger completions when typing in a slash command
* [x] don't show line numbers
* [x] implement `prompt` command
* [x] `current-file` command
* [x] state gets corrupted on `duplicate line up` on a slash command
* [x] exclude slash command source from completion request
Next steps:
* show output token count in flap trailer
* add `/project` command that matches project ambient context
* delete ambient context
Release Notes:
- N/A
---------
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
This PR changes the interface of ContextProvider, allowing it to inspect
*all* variables set so far during the process of building
`TaskVariables`. This makes it possible to capture e.g. an identifier in
tree-sitter query, process it and then export it as a task variable.
Notably, the list of variables includes captures prefixed with leading
underscore; they are removed after all calls to `build_context`, but it
makes it possible to capture something and then conditionally preserve
it (and perhaps modify it).
Release Notes:
- N/A
I don't know whether there are any hard UI guidelines that dictate
whether this should be allowed or not, but I think it's very handy and
missed it.
I also think it makes sense to have this in a directory-centric editor
in which opening a directory creates a new window.
Release Notes:
- Added ability to create directory in open-file dialog on macOS.
When you press `V` to go into visual-line mode in Vim,
`selections.line_mode` is true and the selection contains _lines_.
But `$ZED_SELECTED_TEXT` always contained just the cursor location or
any non-line-mode selection that was previously made.
Release Notes:
- Fixed `$ZED_SELECTED_TEXT` variable in Tasks ignoring whether
visual-line-mode in Vim was used.
### This pull request adds the following:
- Missing mapping for the `yield` keyword.
- Outline scheme for `describe`, `it` and `test`
function_call_expressions (to support Pest runnable)
- Pest runnable support
- PHPUnit runnable support
- Task for running selected PHP code.
## Queries explanations
#### Query 1 (PHPUnit: Run specific method test):
1. Class is not abstract (because you cannot run tests from an abstract
class)
2. Class has `Test` suffix
3. Method has public modifier(or no modifiers, default is public)
4. Method has `test` prefix
#### Query 2 (PHPUnit: Run specific method test with `@test`
annotation):
1. Class is not abstract (because you cannot run tests from an abstract
class)
2. Class has `Test` suffix
3. Method has public modifier(or no modifiers, default is public)
4. Method has `@test` annotation
#### Query 3 (PHPUnit: Run specific method test with `#[Test]`
attribute):
1. Class is not abstract (because you cannot run tests from an abstract
class)
2. Class has `Test` suffix
3. Method has public modifier(or no modifiers, default is public)
4. Method has `#[Test]` attribute
#### Query 4 (PHPUnit: Run all tests inside the class):
1. Class is not abstract (because you cannot run tests from an abstract
class)
2. Class has `Test` suffix
#### Query 5 (Pest: Run function test)
1. Function expression has one of the following names: `describe`, `it`
or `test`
2. Function expression first argument is a string
### **PHPUnit: Example for valid test class**
<img width="549" alt="Screenshot 2024-05-08 at 10 41 34"
src="https://github.com/zed-industries/zed/assets/62463826/e84269de-4f53-410b-b93b-713f9448dc79">
### **PHPUnit: Example for invalid test class**
All the methods should be ignored because you cannot run tests on an
abstract class.
<img width="608" alt="Screenshot 2024-05-07 at 22 28 57"
src="https://github.com/zed-industries/zed/assets/62463826/8c6b3921-5266-4d88-ada5-5cd827bcf242">
### **Pest: Example**
https://github.com/zed-industries/zed/assets/62463826/bce133eb-0a6f-4ca2-9739-12d9169bb9d6
You should now see all your **Pest** tests inside the buffer symbols
modal.
Release Notes:
- Added test runnable detection for PHP (PHPUnit & Pest).
- Added task for running selected PHP code.
- Added `describe`, `test` and `it` functions to buffer symbols, to
support Pest runnable.
- Added `yield` keyword to PHP keyword mapping.
This fixes#4529 by allowing unsaved buffers to be formatted with
prettier.
Steps to do that:
1. Create a new buffer
2. Set language for the buffer (e.g.: `language selector: toggle` and
JSON)
3. In settings, set prettier parser for language (can't be inferred,
since we don't have filename) and allow formatting with prettier:
```json
{
"languages": {
"JSON": {
"prettier": {
"allowed": true,
"parser": "json"
}
}
}
}
```
4. Use `editor: format`
Release Notes:
- Added ability to format unsaved buffers with Prettier. Requirement is
to set a Prettier parser in the user settings. Example for JSON: `{
"languages": { "JSON": { "prettier": { "allowed": true, "parser": "json"
} } } }` ([#4529](https://github.com/zed-industries/zed/issues/4529)).
Demo:
https://github.com/zed-industries/zed/assets/1185253/d24e490b-2e2c-4a5d-95a8-fc8675523780
If you have already installed `node` using `brew install node`, you are
fine. If you did not install `node` on you local machine, it fails.
The `node_binary` path is actually not included in environment variable.
When run `npm install`, some extensions like `eslint`, may run some
commands like `sh -c node .....`. Since `node_binary` path is not
included in `PATH` variable, `sh -c node ...` will fail complaining that
"command not found". If you have installed `node` before, `node` is
already included in `PATH`, so you are fine. If not, it fails.
Closes#11890
Release Notes:
- Fixed Zed's internal Node runtime not being put in `$PATH` correctly
when running language servers and other commands with `node`.
([#11890](https://github.com/zed-industries/zed/issues/11890))
---------
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
This pull request introduces the ability to add flaps, custom foldable
regions whose first foldable line can be associated with:
- A toggle in the gutter
- A trailer showed at the end of the line, before the inline blame
information
https://github.com/zed-industries/zed/assets/482957/c53a9148-f31a-4743-af64-18afa73c404c
To achieve this, we changed `FoldMap::fold` to accept a piece of text to
display when the range is folded. We use this capability in flaps to
avoid displaying the ellipsis character.
We want to use this new API in the assistant to fold context while still
giving visual cues as to what that context is.
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Max <max@zed.dev>
This fixes#10224 by handling `client/unregisterCapability` requests
that have a `workspace/didChangeWatchedFiles` method.
While debugging the issue, I found out that `gopls` seems to block
indefinitely when there's no reply to the `client/unregisterCapability`
request. Even an empty response would fix the issue.
Seems like gopls 15.x and later seem to handle nested subfolders well,
but do not handle unanswered requests.
Instead of replying with an empty response, I decided to change how we
handle file watching and keep a list of all registered paths so that we
can then unregister paths and recreate the glob patterns.
Release Notes:
- Fixed `gopls` not working correctly when the `go.mod` file was in a
subfolder and not the root folder of the project opened in Zed.
([#10224](https://github.com/zed-industries/zed/issues/10224)).
Add config for tag autoclosing: add following to lsp section of your
settings:
"vscode-html-language-server": {
"settings": {
"html": { "tagAutoclosing": true }
}
}
It also accepts `css`, `js/ts` and `javascript` as options.
Disable HTML language server in JS/TS/TSX files for now. I decided to
disable it for now as it caused excessive edits in these types of files
(as reported by @mariansimecek in
https://github.com/zed-industries/zed/pull/11761#issuecomment-2122038107);
it looks like HTML language server tries to track language ranges (e.g.
whether a particular span is TS/HTML fragment etc) just like we do.
However in plain JS/TSX files it seems like it treats the whole file as
one big chunk of HTML, which is.. not right, to say the least.
No release note, as HTML extension goodies are not on Preview yet.
Release Notes:
- N/A
Currently the main binary will open an empty file if no previous
workspaces exist or, if it is the first startup, show the welcome page.
When starting via the CLI it will simply drop you in an empty workspace:
no empty file and no welcome page.
This changes the CLI startup to match the behavior of the non-CLI
startup, so they will both create an empty file or show the welcome page
if no path was given and no workspaces were opened in the past.
Release Notes:
- Matched startup behavior of the CLI to the behavior of the main app.
This uses Jaro-Winkler similarity for now, which seemed to produce
pretty good results in my tests. We can easily swap it with something
else if needed.
Release Notes:
- N/A
Fixes#5267
TODO:
- [x] Publish our fork of vscode-langservers-extracted on GH and wire
that through as a language server of choice for HTML extension.
- [x] Figure out how to prevent edits made by remote participants from
moving the cursor of a host.
Release Notes:
- Added support for autoclosing of HTML tags in local projects.
Adds the ability to have some effect run when a selection changes in a
picker.
If the `PickerDelegate` implements something other than `None` for
`selected_index_changed` then each time the selection changes it will
run that effect.
For example:
```rs
impl PickerDelegate for PromptManagerDelegate {
//...
fn selected_index_changed(
&self,
ix: usize,
cx: &mut ViewContext<Picker<Self>>,
) -> Option<Box<dyn Fn(&mut WindowContext) + 'static>> {
Some(self.prompt_manager.set_active_prompt(ix, cx))
}
//...
}
```
This isn't currently used in any picker, but I'm adding this to allow
the functionality we intended for the prompt library, we're changing
selections, activates a preview in the right column.
This will be useful for building any sort of UI where there's a picker
on the left and a preview on the right, such as a UI like them
telescope.
Release Notes:
- N/A
Release Notes:
- Added glob support for file_types configuration
([#10765](https://github.com/zed-industries/zed/issues/10765)).
`file_types` can now be written like this:
```json
"file_types": {
"Dockerfile": [
"Dockerfile",
"Dockerfile.*",
]
}
```
This pull request adds ability to pass `initialization_options` to both
`solargraph` and `ruby-lsp` language servers. Additionally it updates
the documentation to reflect that and the recently added `ruby-lsp`
server.
Release Notes:
- Pass `initialization_options` to Ruby LSP servers.
### Todo
* [x] tuck the new system prompt away somehow
* for now, we're treating it as built-in, and not editable. once we have
a way to fold away default prompts, let's make it a default prompt.
* [x] when applying edits, re-parse the edit from the latest content of
the assistant buffer (to allow for manual editing of edits)
* [x] automatically adjust the indentation of edits suggested by the
assistant
* [x] fix edit row highlights persisting even when assistant messages
with edits are deleted
* ~adjust the fuzzy search to allow for small errors in the old text,
using some string similarity routine~
We decided to defer the fuzzy searching thing to a separate PR, since
it's a little bit involved, and the current functionality works well
enough to be worth landing. A couple of notes on the fuzzy searching:
* sometimes the assistant accidentally omits line breaks from the text
that it wants to replace
* when the old text has hallucinations, the new text often contains the
same hallucinations. so we'll probably need to use a more fine-grained
editing strategy where we perform a character-wise diff of the old and
new text as reported by the assistant, and then adjust that diff so that
it can be applied to the actual buffer text
Release Notes:
- Added the ability to request edits to project files using the
assistant panel.
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Nathan <nathan@zed.dev>
I'm not a huge fan of passing around a boolean all around the place, but
this will tame the events for now until we have a better solution.
Release Notes:
- N/A
Follow up to: https://github.com/zed-industries/zed/pull/10986
However, I have set this to have a default behavior of 'auto': matching
the current platform's conventions, rather than a default value of
'off'.
fixes https://github.com/zed-industries/zed/issues/5322.
Release Notes:
- Changed the behavior of `workspace::CloseActiveItem`: when you're
using macOS and there are no open tabs, it now closes the window
([#5322](https://github.com/zed-industries/zed/issues/5322)). This can
be controlled with a new setting, `when_closing_with_no_tabs`, to
disable it on macOS, or enable it on other platforms.
### Title
Update macOS Development Documentation with Dispatch.h Error Solution
### Description
This PR updates the macOS development documentation to include a
solution for the `dispatch/dispatch.h` file not found error. This error
is encountered during local development when using the `cargo run`
command. The documentation now includes steps to ensure the Xcode
command line tools are properly installed and set, and instructions to
set the `BINDGEN_EXTRA_CLANG_ARGS` environment variable.
### Changes
- Added troubleshooting section for `dispatch/dispatch.h` error in
`development/macos.md`.
### Related Issues
- Closes [#11963](https://github.com/zed-industries/zed/issues/11963)
### Testing Instructions
1. Follow the steps in the updated `development/macos.md` to configure
your environment.
2. Run `cargo clean` and `cargo run` to ensure the build completes
successfully.
Release Notes:
- N/A
If opening a url opens the first browser window the call does not return
completely blocking the ui until the browser window is closed. Using
spawn instead of status does not block, but we will loose the exitstatus
of the browser window.
Release Notes:
- N/A
Improves documentation for `CodeLabel.filter_range` in
`zed_extension_api` by clarifying that it's a range of only the text
displayed in the label, *not* the `code` field.
Release Notes:
- N/A
This PR removes the default syntax colors from the theme.
With the changes in #11911 these colors could leak through if the theme
didn't provide a value for that syntax color.
Removing them gives themes a clean slate to work with.
Release Notes:
- N/A
Previously, when highlighting editor rows with a color, we always
auto-scrolled to the first highlighted row. This was useful in contexts
like go-to-line and the outline view. We had an explicit special case
for git diff highlights. Now, part of the `highlight_rows` API, you
specify whether or not you want the autoscroll behavior. This is needed
because we want to highlight rows in the assistant panel, and we don't
want the autoscroll.
Release Notes:
- N/A
I noticed that scrolling the assistant panel was very slow in debug
mode, after running a completion. From profiling, I saw that it was due
to the buffer's `is_dirty` and `has_conflict` checks, which use
`edits_since` to check if there are any non-undone edits since the saved
version.
I optimized this in two ways:
* I introduced a specialized `has_edits_since` method on text buffers,
which allows us to more cheaply check if the buffer has been edited
since a given version, without some of the overhead involved in
computing what the edits actually are.
* In the case of `has_conflict`, we don't even need to call that method
in the case where the buffer doesn't have a file (is untitled, as is the
case in the assistant panel). Buffers without files cannot be in
conflict.
Release Notes:
- Improved performance of editing the assistant panel and untitled
buffers with many edits.
This PR removes the wiring for `assistant2` that hooks it up to Zed.
Since we're focusing in on improving the current assistant, we don't
need this present in Zed.
I left the `assistant2` crate intact for now, to make it easier to
reference any code from it.
Release Notes:
- N/A
This pull request adds XIM (X Input Method) support to x11 platform.
The implementation utilizes [xim-rs](https://crates.io/crates/xim), a
XIM library written entirely in Rust, to provide asynchronous XIM
communication.
Preedit and candidate positioning are fully supported in the editor
interface, yet notably absent in the terminal environment.
This work is sponsored by [Rainlab Inc.](https://rainlab.co.jp/en/)
Release Notes:
- N/A
---------
Signed-off-by: npmania <np@mkv.li>
This PR removes the `unwrap`s in the `RecentBuffersContext` when
building the message.
We can just make `build_message` return a `Result` to clean things up.
Release Notes:
- N/A
Now (on `macOS` and `Windows`) we can set font feature value:
```rust
"buffer_font_features": {
"cv01": true,
"cv03": 3,
"cv09": 1,
"VSAH": 7,
"VSAJ": 8
}
```
And one can still use `"cv01": true`.
https://github.com/zed-industries/zed/assets/14981363/3e3fcf4f-abdb-4d9e-a0a6-71dc24a515c2
Release Notes:
- Added font feature values, now you can set font features like `"cv01":
7`.
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
Data migration plan:
- [X] Make a duplicate table of `copilot_events`
- Name: `inline_completion_events`
- Omit `suggestion_id` column
- [X-reverted-skipping] In collab, continue to match on copilot_events,
but simply stuff their data into inline_completion_events, to forward it
to the new table
- [skipping] Once collab is deployed, ensure no events are being sent to
copilot_events, migrate `copilot_events` to new table via a transaction
- [skipping] Delete `copilot_events` table
---
- [X] Locally test that copilot events sent from old clients get put
into inline_completions_table
- [X] Locally test that copilot events and supermaven events sent from
new clients get put into inline_completions_table
---
- [X] Why are discard events being spammed?
- A:
8d4315712b/crates/editor/src/editor.rs (L2147)
This will throw off the past results for accepted / dismissed that I was
wanting to use to evaluate Supermaven quality, by comparing its rate
with copilot's rate.
I'm not super thrilled with this fix, but I think it'll do. In the
`supermaven_completions_provider`, we check if there's a `completion_id`
before sending either an accepted or discard completion event. I don't
see a similar construct in the `copilot_completions_provider` to
piggyback off of, so I begrudgingly introduced
`should_allow_event_to_send` and had it follow the same pattern that
`completion_id` does. Maybe there's a better way?
---
Adds events to supermaven suggestions. Makes "CopilotEvents" generic ->
"InlineCompletionEvents".
Release Notes:
- N/A
This PR adds a Prompt Library to Zed, powering custom prompts and any
default prompts we want to package with the assistant.
These are useful for:
- Creating a "default prompt" - a super prompt that includes a
collection of things you want the assistant to know in every
conversation.
- Adding single prompts to your current context to help guide the
assistant's responses.
- (In the future) dynamically adding certain prompts to the assistant
based on the current context, such as the presence of Rust code or a
specific async runtime you want to work with.
These will also be useful for populating the assistant actions typeahead
we plan to build in the near future.
## Prompt Library
The prompt library is a registry of prompts. Initially by default when
opening the assistant, the prompt manager will load any custom prompts
present in your `~/.config/zed/prompts` directory.
Checked prompts are included in your "default prompt", which can be
inserted into the assitant by running `assistant: insert default prompt`
or clicking the `Insert Default Prompt` button in the assistant panel's
more menu.
When the app starts, no prompts are set to default. You can add prompts
to the default by checking them in the Prompt Library.
I plan to improve this UX in the future, allowing your default prompts
to be remembered, and allowing creating, editing and exporting prompts
from the Library.
### Creating a custom prompt
Prompts have a simple format:
```json
{
// ~/.config/zed/prompts/no-comments.json
"title": "No comments in code",
"version": "1.0",
"author": "Nate Butler <iamnbutler@gmail.com>",
"languages": ["*"],
"prompt": "Do not add inline or doc comments to any returned code. Avoid removing existing comments unless they are no longer accurate due to changes in the code."
}
```
Ensure you properly escape your prompt string when creating a new prompt
file.
Example:
```json
{
// ...
"prompt": "This project using the gpui crate as it's UI framework for building UI in Rust. When working in Rust files with gpui components, import it's dependencies using `use gpui::{*, prelude::*}`.\n\nWhen a struct has a `#[derive(IntoElement)]` attribute, it is a UI component that must implement `RenderOnce`. Example:\n\n```rust\n#[derive(IntoElement)]\nstruct MyComponent {\n id: ElementId,\n}\n\nimpl MyComponent {\n pub fn new(id: impl Into<ElementId>) -> Self {\n Self { id.into() }\n }\n}\n\nimpl RenderOnce for MyComponent {\n fn render(self, cx: &mut WindowContext) -> impl IntoElement {\n div().id(self.id.clone()).child(text(\"Hello, world!\"))\n }\n}\n```"
}
```
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
With the changes in #11817, context menus within editors would get
scaled by the `buffer_font_size` instead of the `ui_font_size`.
This seems incorrect, as it results in context menus being sized
inconsistently depending on what context they originate from.
This PR makes it so that all context menus scale based on the
`ui_font_size`.
### Before
<img width="1474" alt="Screenshot 2024-05-16 at 2 43 19 PM"
src="https://github.com/zed-industries/zed/assets/1486634/a5be8113-ae24-44ad-a2e9-61105e1fcc9e">
### After
<img width="1095" alt="Screenshot 2024-05-16 at 2 43 01 PM"
src="https://github.com/zed-industries/zed/assets/1486634/3a8d51cf-fc91-4743-8f44-78344028e447">
Release Notes:
- Changed context menus in editors to no longer scale with
`buffer_font_size`.
Release Notes:
- N/A
Fixes#9207
Known Issues:
- [ ] ~~After launching Zed and immediately trying to change input
method, the input panel will appear at Point{0, 0}~~
- [ ] ~~`ime_handle_preedit` should not trigger `write_to_primary`~~
Move to other PR
- [ ] ~~Cursor is visually stuck at the end.~~ Move to other PR
Currently tested with KDE & fcitx5.
This PR adds a new `WithRemSize` element to the `ui` crate.
This element can be used to create an element tree that has a different
rem size than the base window.
`WithRemSize` can be nested, allowing for subtrees that have a different
rem size than their parent and their children.
<img width="912" alt="Screenshot 2024-05-16 at 2 25 28 PM"
src="https://github.com/zed-industries/zed/assets/1486634/f599cd9f-c101-496b-93e8-06e570fbf74f">
Release Notes:
- N/A
This PR adds some ergonomic improvements when working with GPUI
`Global`s.
Two new traits have been added—`ReadGlobal` and `UpdateGlobal`—that
provide associated functions on any type that implements `Global` for
accessing and updating the global without needing to call the methods on
the `cx` directly (which generally involves qualifying the type).
I looked into adding `ObserveGlobal` as well, but this seems a bit
trickier to implement as the signatures of `cx.observe_global` vary
slightly between the different contexts.
Release Notes:
- N/A
Adding `proxy` keyword to configure proxy while using zed. After setting
the proxy, restart Zed to acctually use the proxy.
Example setting:
```rust
"proxy" = "socks5://localhost:10808"
"proxy" = "http://127.0.0.1:10809"
```
Closes#9424, closes#9422, closes#8650, closes#5032, closes#6701,
closes#11890
Release Notes:
- Added settings to configure proxy in Zed
---------
Co-authored-by: Jason Lee <huacnlee@gmail.com>
This adds the ability to configure the `tailwindcss-language-server`
integration to use a custom build of the server.
Example configuration in Zed `settings.json`:
```json
{
"lsp": {
"tailwindcss-language-server": {
"binary": {
"arguments": [
"/Users/username/tailwindcss-intellisense/packages/tailwindcss-language-server/bin/tailwindcss-language-server",
"--stdio"
]
}
}
}
}
```
This will cause Zed to use its own Node version and run it with the
given arguments.
**Note**: you need to provide `--stdio` as the second argument!
It's also possible to use a custom Node binary:
```json
{
"lsp": {
"tailwindcss-language-server": {
"binary": {
"path": "/Users/username/bin/my-node",
"arguments": [
"/Users/username/tailwindcss-intellisense/packages/tailwindcss-language-server/bin/tailwindcss-language-server",
"--stdio"
]
}
}
}
}
```
This is *super handy* when debugging the language server.
Release Notes:
- Added ability to configure own build of `tailwindcss-language-server`
in Zed settings. Example:
`{"lsp":{"tailwindcss-language-server":{"binary":{"arguments":["/absolute/path/to/tailwindcss-language-server/bin/tailwindcss-language-server",
"--stdio" ]}}}}`
This PR improves the merging behavior for the `SyntaxTheme` such that
user-provided values get merged into the base theme.
This makes it possible to override individual styles without clobbering
the unspecified styles in the base theme.
Release Notes:
- Improved merging of `syntax` styles in the theme.
This PR addresses a TODO comment by making `SyntaxTheme::new_test` only
available in tests.
We needed to make it available when the `test-support` feature was
enabled for it to be used in tests outside of the `theme` crate.
Release Notes:
- N/A
Hi, I saw someone on Twitter mentioned that missing Cut, Copy and Paste
actions in the context menu in the editor block them from using Zed. It
turns out that resolving this issue is simply a matter of adding these
actions to the mouse context menu. To keep items in the context menu
grouped, I placed them at the top of the menu with a separator at the
end. Let me know if that's OK. Thanks!
Here is the screenshot:
Release Notes:
- Added "Cut", "Copy", and "Paste" actions to the context menu
([#4280](https://github.com/zed-industries/zed/issues/4280)).
This fixes#10532 by properly making use of `itemDefaults.data` when
that is sent along next to completion `items`.
With this line here we tell the language server that we support `data`
in `itemDefaults`, but we actually never checked for it and never used
it:
a0d7ec9f8e/crates/lsp/src/lsp.rs (L653)
In the case of `tailwindcss-language-server` that means that most of the
items it returns (more than 10k items!) were missing the `data`
attribute, since the language server thought it can send it along in the
`itemDefaults` (because we advertised our capability to use it.)
When we then did a `completionItem/resolve`, we would not send a `data`
attribute along, which lead to an error on the
`tailwindcss-language-server` side and thus no documentation.
This PR also adds support for the other `itemDefaults` that could be
sent along and that we say we support:
a0d7ec9f8e/crates/lsp/src/lsp.rs (L650-L653)
`editRange` we handle separately, so this PR only adds the other 3.
Release Notes:
- Fixed documentation not showing up for completion items coming from
`tailwindcss-language-server`.
([#10532](https://github.com/zed-industries/zed/issues/10532)).
Demo:
https://github.com/zed-industries/zed/assets/1185253/bc5ea0b3-7d83-499f-a908-b0d2a1db8a41
Fix: this makes sure we have token counts for the new GPT-4o model.
See: https://github.com/zurawiki/tiktoken-rs/releases/tag/v0.5.9
Release Notes:
- Fix: Token count was missing for the new GPT-4o model.
(I believe this should go in a 0.136.x release)
Without this, we'd get constant errors when typing something with ESLint
enabled:
[2024-05-16T10:32:30+02:00 WARN project] Generic lsp request to node
failed: Request textDocument/codeAction failed with message: Cannot read
properties of undefined (reading 'disableRuleComment')
[2024-05-16T10:32:30+02:00 ERROR util]
crates/project/src/project.rs:7023: Request textDocument/codeAction
failed with message: Cannot read properties of undefined (reading
'disableRuleComment')
[2024-05-16T10:32:31+02:00 WARN project] Generic lsp request to node
failed: Request textDocument/codeAction failed with message: Cannot read
properties of undefined (reading 'disableRuleComment')
[2024-05-16T10:32:31+02:00 ERROR util]
crates/project/src/project.rs:7023: Request textDocument/codeAction
failed with message: Cannot read properties of undefined (reading
'disableRuleComment')
This is fixed by changing the default settings for ESLint language
server to have those fields.
I don't think we need to make these configurable yet. These are defaults
that multiple other plugins also use:
- vscode-eslint:
https://sourcegraph.com/github.com/microsoft/vscode-eslint@4d9fc40e71c403d359beaccdd4a6f8d027031513/-/blob/client/src/client.ts?L702-703
- nvim-lspconfig:
https://sourcegraph.com/github.com/neovim/nvim-lspconfig@a27179f56c6f98a4cdcc79ee2971b514815a4940/-/blob/lua/lspconfig/server_configurations/eslint.lua?L94-101
- coc-eslitn:
https://sourcegraph.com/github.com/neoclide/coc-eslint@70eb10d294e068757743f9b580c724e92c5b977d/-/blob/src/index.ts?L698:17-698:35
Release Notes:
- Changed the default ESLint configuration to include the following in
order to silence warnings/errors: `{"codeAction": {
"disableRuleComment": { "enable": true, "location": "separateLine", },
"showDocumentation": { "enable": true } }}`
This PR factors some more code related to the `RecentBuffersContext` out
of the `AssistantPanel` and into the corresponding module.
We're trying to strike a balance between keeping this code easy to
evolve as we work on the Assistant, while also having some semblance of
separation/structure.
This also adds the missing functionality of updating the remaining token
count when the `CurrentProjectContext` is enabled/disabled.
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
Closes https://github.com/zed-industries/zed/issues/11517
* Removes forced prettier parser name for languages, making `auto`
command to run prettier on every file by default.
* Moves prettier configs away from plugin language declarations into
language settings
Release Notes:
- N/A
Hello, this pull request changes the indentation level for Ruby language
from 2 spaces to the most used setting in the Ruby world: 2 spaces per
indentation level.
This setting is mentioned in the [Ruby style guide from the Rubocop
(Ruby linter and formatter)
team](https://rubystyle.guide/#spaces-indentation) and/or in another
popular Rubocop configuration tool -
[`standardrb`](https://github.com/standardrb/standard/blob/main/config/base.yml#L233)
Thanks!
Release Notes:
- N/A
Currently , on Windows 10, we used a `Timer` to trigger the vsync event,
but the `Timer`'s time precision is only about 15ms, which means a
maximum of 60FPS. This PR introduces a new function to allow for higher
frame rates on Windows 10.
And after reading the codes, I found that zed triggers a draw after
handling mouse or keyboard events, so we don't need to call draw again
when we handle `WM_*` messages. Therefore, I removed the
`invalidate_client_area` function.
Release Notes:
- N/A
This PR brings support for all `OpenType` font features to
`macOS(v10.10+)`. Now, both `Windows`(with #10756 ) and `macOS` support
all font features.
Due to my limited familiarity with the APIs on macOS, I believe I have
made sure to call `CFRelease` on all variables where it should be
called.
Close#11486 , and I think the official website's
[documentation](https://zed.dev/docs/configuring-zed) can be updated
after merging this PR.
> Zed supports a subset of OpenType features that can be enabled or
disabled for a given buffer or terminal font. The following OpenType
features can be enabled or disabled too: calt, case, cpsp, frac, liga,
onum, ordn, pnum, ss01, ss02, ss03, ss04, ss05, ss06, ss07, ss08, ss09,
ss10, ss11, ss12, ss13, ss14, ss15, ss16, ss17, ss18, ss19, ss20, subs,
sups, swsh, titl, tnum, zero.
https://github.com/zed-industries/zed/assets/14981363/44e503f9-1496-4746-bc7d-20878c6f8a93
Release Notes:
- Added support for **all** `OpenType` font features to macOS.
This fixes the issue mentioned here:
https://github.com/zed-industries/zed/issues/5830#issuecomment-2111947083
In order for other languages to work, we need to pass the following
settings along to the Tailwind language server.
With the following Zed settings, it then also works for Scala:
```json
{
"languages": {
"Scala": {
"language_servers": ["tailwindcss-language-server"]
},
},
"lsp": {
"tailwindcss-language-server": {
"settings": {
"includeLanguages": {
"scala": "html"
},
"experimental": {
"classRegex": ["[cls|className]\\s\\:\\=\\s\"([^\"]*)"]
}
}
}
}
}
```
Release Notes:
- Added ability to configure settings for `tailwindcss-language-server`,
namely the `includeLanguages` and `experimental` objects.
**NOTE**: I have only tested that the language server boots up for Scala
files and that the settings are forwarded correctly. I don't have a
Scala+Tailwind project with which to test that the actual completions
also work.
cc @nguyenyou
Previously, we had an instance buffer pool that could only allocate
buffers with a fixed size (hardcoded to 2mb). This caused certain scenes
to render partially, e.g. when showing tens of thousands of glyphs on a
big screen.
With this commit, when `MetalRenderer` detects that a scene would be too
large to render using the current instance buffer size, it will:
- Clear the existing instance buffers
- Allocate new instance buffers that are twice as large
- Retry rendering the scene that failed with the newly-allocated buffers
during the same frame.
This fixes#11615.
Release Notes:
- Fixed rendering issues that could arise when having large amounts of
text displayed on a large display. Fixed by dynamically increasing the
size of the buffers used on the GPU.
([#11615](https://github.com/zed-industries/zed/issues/11615)).
Before:
https://github.com/zed-industries/zed/assets/1185253/464463be-b61c-4149-a417-01701699decb
After:
https://github.com/zed-industries/zed/assets/1185253/4feacf5a-d862-4a6b-90b8-317ac74e9851
Co-authored-by: Antonio <me@as-cii.com>
We were marking `#[cfg(test)]`ed function as a test, which is wrong.
Also allow for other attribute_items (such as #[should_panic]) between
test attribute and a function item.
Release Notes:
- N/A
This changes the vim::MoveToNextMatch event callback to open the
buffer_search toolbar. This fixes an issue where highlights would appear
which were only cancellable by opening then closing the toolbar.
Release Notes:
- the buffer search toolbar now opens on vim::MoveToNextMatch fixing the
issue where highlights were not cancellable
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Fixes: #11715
(also apply alpha of the color to wavy ones while we're at it)
Release Notes:
- Fixed display of straight underlines when using the blade renderer
(#11715)
Fixes a bug where Vim bindings would flash in the mouse context menu and
then be replaced by the default keybindings. Also fixes those bindings
not being usable while the mouse context menu was open.
Release Notes:
- Fixed bug where Vim bindings were not available when mouse context
menu was open
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This PR adds the beginnings of current project context to the Assistant.
Currently it supports reading a `Cargo.toml` file and using that to get
some basic information about the project, and its dependencies:
<img width="1264" alt="Screenshot 2024-05-14 at 6 17 03 PM"
src="https://github.com/zed-industries/zed/assets/1486634/cc8ed5ad-0ccb-45da-9c07-c96af84a14e3">
Release Notes:
- N/A
---------
Co-authored-by: Nate <nate@zed.dev>
This PR restructures the ambient context in the `assistant` crate to
make it more amenable to adding more kinds of ambient context.
Release Notes:
- N/A
If you go to the file tree and press "x" (which is
"project_panel::RevealInFinder"). It will open the default file
manager(in my case nautilus). But on Linux it makes Zed unresponsive.
This fixes that.
Release Notes:
- Fixed Zed blocked after opening file manager in the file tree on
Linux.
Zed can detect changes in monitor connections and disconnections and
provide corresponding feedback. For example, if the current window's
display monitor is disconnected, the window will be moved to the primary
monitor. And now Zed always opens on the monitor specified in
`WindowParams`.
Release Notes:
- N/A
Release Notes:
- Added support for interacting with Claude in the assistant panel. You
can enable it by adding the following to your `settings.json`:
```json
"assistant": {
"version": "1",
"provider": {
"name": "anthropic"
}
}
```
Release Notes:
- Improved tasks modal by highlighting a distinction between a task
template and concrete task instance and surfacing available keybindings
more prominently. Task templates are now always available in the modal,
even if there's already a history entry with the same label.
- Changed default key binding for "picker::UseSelectedQuery" to `opt-e`.
This fixes#8794 and other related problems.
The problem, in short, is this: `$SHELL` might be outdated. This code
ensures that we update `$SHELL` to what we can deem the newest version,
if we're started as a desktop application.
The background is that you can get the user's preferred shell in two
ways:
1. Read the `SHELL` env variable
2. Read the `/etc/passwd` file and check which shell is set
Most applications should and do prefer (1) over (2).
Why is it preferred? Reading `SHELL` means that processes can inherit
the variable from each other. And you can do something like
`SHELL=/bin/cool-shell ./my-cool-app`
But what happens if the application was launched from the desktop? Which
SHELL env does it inherit then?
It inherits the env from the process that launched it, which is
Finder.app or launchd or GNOME or something else — these are all
long-running processes that get their environment when the user logs in.
They do *not* get a new environment unless restarted (either process
restarted or computer restarted)
That means the `SHELL` env variable they have might be outdated.
That's a problem if you, for example, change your shell with `chsh` and
then launch the app from the desktop.
That change of the default shell is not reflected in the app if the app
only reads from SHELL. Because that hasn’t been updated. Instead it
should read from passwd file to get the newest value.
Release Notes:
- Fixed SHELL being outdated if Zed was launched via Finder or Raycast
or other desktop launchers.
([#8794](https://github.com/zed-industries/zed/issues/8794))
This PR adds a new `cargo xtask licenses` command for finding crates
with missing license files.
A number of crates were uncovered that were missing a license file, and
have had the appropriate license file added.
Release Notes:
- N/A
Fix typos on the Assistant Panel page, also including removal of
unnecessary commas and standardization to US English.
Release Notes:
- N/A
PS: Assuming here US English is the preferred style (e.g., "canceled"
vs. "cancelled".) Happy to revert if that's not the case! :)
Standardize the blockquote "Notes" usage, so all places are using the
`>` blockquote notation, as well as a consistent style for the "Note"
word.
PS: Thought that bolding the word "**Note**" would make for a higher
visual distinction, so went for it in all existing cases! No strong
feelings, though; happy to roll back to just "Note:" if that's
preferrable!
Release Notes:
- N/A
This fixes#10871.
The introduction of #11412 broke Vue.js language support, since it made
Zed rely more heavily on correct language name -> language ID mappings,
which the Vue.js extension didn't have.
Release Notes:
- N/A
This fixes#10185 by not keeping snippet state around when already at
the end of the snippet and the tabstop is empty (i.e. it's not a
selection) and we're already on it.
The reason for the fix is outlined in the comments of #10185 but to
repeat:
1. `gopls` sends completions with type "snippet" even when suggesting
single word completions that don't contain tabstops
2. We use a default behavior and add an "end tabstop" by default so that
the cursor jumps to the end of the snippet when accepting it.
3. We'd then push the state of the snippet on the stack which is where
it would stay, with the cursor already at the end and the user unable to
get rid of the tabstop state.
This fixes the issue by not pushing snippet state when the tabstop we
accepted is the "end tabstop".
Release Notes:
- Fixed completions inside snippets breaking the jump-to-next-tabstop
behaviour when using Go/`gopls`
([#10185](https://github.com/zed-industries/zed/issues/10185)).
Demo:
https://github.com/zed-industries/zed/assets/1185253/35384e5e-45c6-46ab-870d-b48e56d8786b
This adds a new option to the right click menu for git blame entries in
the gutter: "Open permalink". If there is a URL for the code host, then
this will open it.
Release Notes:
- Added "Open permalink" option to right-click menu of git blame entries
in gutter.
Demo:
Implemented autosave functionality with a delay, which now refrains from
formatting the code upon triggering unless the user manually saves it.
Additionally, enhanced documentation for the `format_on_save` setting
has been added. This resolves the issue where autosave with delay would
inadvertently format the code, disrupting the user experience, as
reported in the corresponding issue.
Release Notes:
- Fixed a bug where autosave after_delay would auto-format the buffer
([#9787](https://github.com/zed-industries/zed/issues/9787)).
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This PR adds an extra scrollbar-wide margin to the right side of the
editor. This prevents hiding the last character under the scrollbar.
Fixes#7098
Release Notes:
- Fixed hiding of the last character under the scrollbar (#7098).
I assume this was an older file name or just a typo as I can't find any
other references to a `keybindings.json` file. Either way it was
confusing for a bit :)
Release Notes:
- N/A
This cleans up the neovim-backed vim tests:
- removed exempted tests (we'll rely on bug reports to find missing edge
cases)
- moved all assertions into non-async fn's so that failures are
reporting on the right file/line
- removed the NeovimBackedBindingTestContext
- renamed a few things to make them clearer
- reduced the number of permutations tested in some cases to reduce
slowest test from 60s to 5s
Release Notes:
- N/A
RustEmbed repeatedly compiled regexes for handling of
'include='/'exclude' statements in a hot loop, which caused each call to
Assets::iter() to take 600ms. Since it is being called twice on our
startup path, that alone contributed over a second to startup time in
debug builds. I've filed a PR with them
https://github.com/pyrossh/rust-embed/pull/244 which brings down the
time for a single iter() call to 6ms.
Release Notes:
- N/A
While looking into how to implement #4901, noticed that the current
`Goto next/previous diagnostic` behaved a bit weirdly. That is, when
there are multiple errors that have overlapping ranges, only the first
one can be chosen to be active by the `go_to_diagnostic_impl`.
### Previous behavior:
https://github.com/zed-industries/zed/assets/71292737/95897675-f5ee-40e5-869f-0a40066eb8e3
Doesn't go through all the diagnostics, and going backwards and forwards
doesn't show the same diagnostic always.
### New behavior:
https://github.com/zed-industries/zed/assets/71292737/81f7945a-7ad8-4a34-b286-cc2799b10500
Should always go through the diagnostics in a consistent manner.
Release Notes:
* Improved the behavioral consistency of "Go to Next/Previous
Diagnostic"
Additionally, the internal `ToolView` trait used by the registry is now
called `InternalToolView`.
This should make it a bit easier to understand that the `ToolView` is
intended for a `gpui::View` (implementing `Render`). It does still feel
like more could be merged here but I think the built tools are now a bit
clearer.
Release Notes:
- N/A
Part of https://github.com/zed-industries/zed/issues/8081
To avoid confusion and bugs when converting between various row `u32`'s,
use different types for each.
Further PRs should split `Point` into buffer and multi buffer variants
and make the code more readable.
Release Notes:
- N/A
---------
Co-authored-by: Piotr <piotr@zed.dev>
Improves the descriptions for some of the tools. I wish we had metrics
to back up changes in how the model responds to tool schema changes so
anecdotally I'm just going to say this _seems_ improved.
Release Notes:
- N/A
The previous implementation relied on a background thread to wake up the
main thread,
which was prone to priority inversion under heavy load.
In a synthetic test, where we spawn 200 git processes while doing a 5ms
timeout, the old version blocked for 5-80ms, the new version blocks for
5.1-5.4ms.
Release Notes:
- Improved responsiveness of the main thread under high system load
This PR removes the references to initializing Git submodules as part of
building Zed.
These are no longer needed, as our only submodule was removed in #11672.
Release Notes:
- N/A
This PR vendors the protobuf files from the LiveKit protocol so that we
don't need to have that entire LiveKit protocol repo as a submodule.
---
Eventually I would like to replace this with the
[`livekit-protocol`](https://crates.io/crates/livekit-protocol) crate,
but there is some churn that needs to happen for that.
The main problem is that we're currently on a different version of
`prost` used by `livekit-protocol`, and upgrading our version of `prost`
means that we now need to source `protoc` ourselves (since it is no
longer available to be compiled from source as part of `prost-build`).
Release Notes:
- N/A
This PR adds a setting to allow configuring the low-speed timeout for
the Assistant when using the OpenAI provider.
The `low_speed_timeout_in_seconds` accepts a number of seconds that the
HTTP client can go below a minimum speed limit (currently set to 100
bytes/second) before it times out.
```json
{
"assistant": {
"version": "1",
"provider": { "name": "openai", "low_speed_timeout_in_seconds": 60 }
},
}
```
This should help the case where the `openai` provider is being used with
a local model that requires higher timeouts.
Issue: https://github.com/zed-industries/zed/issues/9913
Release Notes:
- Added a `low_speed_timeout_in_seconds` setting to the Assistant's
OpenAI provider
([#9913](https://github.com/zed-industries/zed/issues/9913)).
This PR moves the Ruby injections added in #8796 to the right location,
since Ruby support was extracted into an extension in #11360.
Release Notes:
- N/A
This PR extracts Ruby and ERB support into an extension and removes the
built-in Ruby and Ruby support from Zed.
As part of this, the new extension is prepared for adding support for
the `Ruby LSP` which has some blockers. See
https://github.com/zed-industries/zed/pull/8613 I was thinking of adding
an initial support for Ruby LSP but I think it would be better to start
with extracting the Ruby extension for now.
The implementation, as the 1st step, matches the bundled version but
with 3 differences:
1. Added signature output to the completion popup. See my comment below.
3. Use the shell environment for starting the `solargraph` executable.
See my comment below.
4. Bumped the tree sitter version for Ruby to the latest available
version.
Additionally, I plan to tweak this extension a bit in the future but I
think we should do this bit by bit. Thanks!
Release Notes:
- Removed built-in support for Ruby, in favor of making it available as
an extension.
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
I ran into this when trying to get #11550 working: the VCS menu would
open repositories on its owned, based on paths, instead of going through
the worktree on which we already store the git repositories.
Release Notes:
- N/A
Release Notes:
- vim: Added support for the changelist. `g;` and `g,` to the
previous/next change
- vim: Added support for the `'.` mark
- vim: Added support for `gi` to resume the previous insert
- [x] Build out cli on linux
- [x] Add support for --dev-server-token sent by the CLI
- [x] Package cli into the .tar.gz
- [x] Link the cli to ~/.local/bin in install.sh
Release Notes:
- linux: Add cli support for managing zed
While these would match how macOS handles this scenario, they crash on
Catalina, and require mouse clicks to interact.
cc @bennetbo
Release Notes:
- N/A
Release Notes:
- vim: Added support for buffer-local marks (`'a-'z`) and some builtin
marks `'<`,`'>`,`'[`,`']`, `'{`, `'}` and `^`. Global marks (`'A-'Z`),
and other builtin marks (`'0-'9`, `'(`, `')`, `''`, `'.`, `'"`) are not
yet implemented. (#5122)
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
To speed up Linux CI builds, use a set of self-hosted Linux machines and
use them to run all slow CI steps for Linux: "tests", bundling and
nightly builds.
Also adds a set of dev icons as Linux bundling script required them for
`run-bundling`-tagged builds from regular PRs.
Same icons as for Preview were used, but, ideally, something different
could be created.
Release Notes:
- N/A
From now on, only top-level captures are treated as runnable tags and
the rest is appended to task context as custom environmental variables
(unless the name is prefixed with _, in which case the capture is
ignored). This is most likely gonna help with Pest-like test runners.
Release Notes:
- N/A
---------
Co-authored-by: Remco <djsmits12@gmail.com>
This PR leverages a more modern Windows API to implement
`WindowsDispatcher`, aligning its implementation more closely with that
of the `macOS` platform. The following improvements have been made:
1. Similar to `macOS`, there is no longer a need to use `sender` and
`receiver` to dispatch a `Runnable` on the main thread.
2. There is also no longer a need to use an `Event` for synchronization.
3. Consistent with #7506 and #11269, `Runnable` is now executed with
high priority.
However, this PR raises the minimum Windows version requirement of
`GPUI` to Windows 10, specifically Windows 10 Fall Creators Update
(10.0.16299). However, the `alacritty_terminal` dependency in Zed relies
on `conPTY` on Windows, an API introduced in the Windows 10 Fall
Creators Update. Therefore, the impact of this PR on Zed should be
minimal. I'd like to hear your voices about this PR, especially about
the minimum Windows version bumping.
Release Notes:
- N/A
There're two errors in scrollbar markers in the presence of folded code:
1. Some markers are not displayed (when the marked row numbers are
greater than the total displayed rows count after folding).
2. Code folding / unfolding doesn't trigger markers repainting.
This PR fixes both problems.
Release Notes:
- Fixed scrollbar markers for folded code.
The second problem (markers are repainted after I move the cursor, not
after folding):
https://github.com/zed-industries/zed/assets/2101250/57ed563d-186d-4497-98ab-d4f946416726
This PR updates the saved conversation picker to use a list of
conversations retrieved from disk instead of the static placeholder
values.
Release Notes:
- N/A
This PR fixes copying code blocks in the docs.
The problem was that some of the elements we removed from the base
mdBook template were causing errors in the script, which prevented the
right event listeners from being registered for the copy button.
To remedy this, the elements have been restored, but are using `display:
none` so that they don't appear in the UI.
Resolves#11592.
Release Notes:
- N/A
This PR updates the root path used by Copilot to be a validate path when
running on Windows.
Release Notes:
- N/A
Co-authored-by: Jason Lee <huacnlee@gmail.com>
A minor thing I've spotted and decided to fix on the spot.
It was being cloned twice within the body of that function (one of which
was redundant even without this PR); now in most cases we go down from 2
clones to 0.
Release Notes:
- N/A
This pull request introduces a new `markdown` crate which is capable of
parsing and rendering a Markdown source. One of the key additions is
that it enables text selection within a `Markdown` view. Eventually,
this will replace `RichText` but for now the goal is to use it in the
assistant revamped assistant in the spirit of making progress.
<img width="711" alt="image"
src="https://github.com/zed-industries/zed/assets/482957/b56c777b-e57c-42f9-95c1-3ada22f63a69">
Note that this pull request doesn't yet use the new markdown renderer in
`assistant2`. This is because we need to modify the assistant before
slotting in the new renderer and I wanted to merge this independently of
those changes.
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Conrad <conrad@zed.dev>
Co-authored-by: Alp <akeles@umd.edu>
Co-authored-by: Zachiah Sawyer <zachiah@proton.me>
It seems that on the first frame after the system resumes from sleep,
`dcomp_vsync_fn` mistakenly detects the `timer_stop_event` triggering
and exits the loop.
Release Notes:
- N/A
This PR changes the Markdown language defaults to set `format_on_save`
to be `off`.
Prettier's Markdown formatting is a bit controversial for some people,
so we turn it off by default.
To restore the previous behavior, add the following to your settings:
```json
{
"languages": {
"Markdown": {
"format_on_save": "on"
}
}
}
```
Release Notes:
- Changed the default `format_on_save` behavior for Markdown files to be
`off`.
Release Notes:
- N/A
## What
Addresses a long-standing issue of doing the blending operations in sRGB
space. Currently, the input HSL colors are provided in sRGB space and
converted to linear in the vertex shader. Conversion back to sRGB, which
is required on most platforms today, happens at the very end of the
pipeline when writing into sRGB render target.
Note-1: in the future we may consider doing HSL -> sRGB -> Linear
transform on CPU before feeding into shaders. However, I don't expect
any significant difference here given that we are likely bound by fill
rate and pixel shaders, anyway.
Note-2: the graphics stack is programmed to detect if the platform
supports presenting in linear color space and avoids converting to sRGB
at the end in this case. However, on my Z13 laptop this isn't supported
by the RADV driver.
Closes#7684Closes#11462
@jansol please confirm if you can!
## Comparison
Screenshot of the Glazier theme before the change:
Same theme after the change:
Previously, `DirectWrite` had been following the text system
implementation on `macOS`, using the font's postscript name to
differentiate between different font faces. However, I noticed
occasional rendering issues, such as fonts incorrectly rendering as
italics. Later, I discovered that on `Windows`, the postscript name is
**not** unique. Surprisingly, even the same font can have different
postscript names on macOS and Windows! It's hard to believe! The
postscript name of a font face should be obtained from the same font
table. Why would the same font face have different names?
For example, the postscript name of ZedMono on `macOS` is
`Zed-Mono-Bold-Extended-Italic`, while on `Windows`, it is
`Zed-Mono-Extended`, missing weight and style information, leading to
incorrect rendering.
This PR introduces a `FontIdentifier` struct to uniquely identify font
faces.
Release Notes:
- N/A
As per Microsoft documentation, positive values scroll right, not left.
GPUI was incorrectly assuming it perfectly mirrored vertical scrolling.
Fixes#11515
Release Notes:
- N/A
This PR is another step to tabless editing (#6424, #4963). It adds
support for tab bar settings that allow the user to change its placement
or to hide completely.
Configuraton:
```json
"tab_bar": {
"show": true
}
```
Placemnet options are "top", "bottom" and "no".
This PR intentionally doesn't affect tab bars of other panes (Terminal
for instance) to keep code changes small. I guess we'll do the rest in
separate PRs.
Release Notes:
- Added support for configuring the editor tab bar (part of #6424,
#4963).
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
This shows "Researching..." as placeholder text as early as possible so
that the user can see the model is working on reading/researching/etc.
This also adds on an `Option<Value>` to the `render_running` function so
that tools can hopefully render based on partially completed JSON (still
to come).
Release Notes:
- N/A
This fixes restart after updates not working on Linux.
On Linux we can't reliably get the binary path after an update, because
the original binary was deleted and the path will contain ` (deleted)`.
See: https://github.com/rust-lang/rust/issues/69343
We *could* strip ` (deleted)` off, but that feels nasty. So instead we
save the original binary path, before we do the installation, then
restart.
Later on, we can also change this to be a _new_ binary path returned by
the installers, which we then have to start.
Release Notes:
- N/A
Now, regardless of how the Zed window is closed, Zed can remember the
window's restore size.
- [x] Windows implementation
- [x] macOS implementation
- [x] Linux implementation (partial)
- [x] update SQL data base (mark column `fullscreen` as deprecated)
The current implementation on Linux is basic, and I'm not sure if it's
correct.
The variable `fullscreen` in SQL can be removed, but I'm unsure how to
do it.
edit: mark `fullscreen` as deprecated
### Case 1
When the window is closed as maximized, reopening it will open in the
maximized state, and returning from maximized state will restore the
position and size it had when it was maximized.
https://github.com/zed-industries/zed/assets/14981363/7207752e-878a-4d43-93a7-41ad1fdb3a06
### Case 2
When the window is closed as fullscreen, reopening it will open in
fullscreen mode, and toggling fullscreen will restore the position and
size it had when it entered fullscreen (note that the fullscreen
application was not recorded in the video, showing a black screen, but
it had actually entered fullscreen mode).
https://github.com/zed-industries/zed/assets/14981363/ea5aa70d-b296-462a-afb3-4c3372883ea3
### What's more
- As English is not my native language, some variable and struct names
may need to be modified to match their actual meaning.
- I am not familiar with the APIs related to macOS and Linux, so
implementation for these two platforms has not been done for now.
- Any suggestions and ideas are welcome.
Release Notes:
- N/A
Fixes#11422 by accepting just the start of the line.
Release Notes:
- N/A
---------
Co-authored-by: max <max@zed.dev>
Co-authored-by: jacob <jacob@supermaven.com>
This PR updates the new assistant with a button to start a new
conversation.
Clicking on it will reset the chat and put it into a fresh state.
The current conversation will be serialized and written to
`~/.config/zed/conversations`.
Release Notes:
- N/A
Just adding a short note about `cargo build --release` and the location
of the compiled binary. It helps a lot to streamline usage of Zed day to
day on Linux.
Release Notes:
- N/A
This PR adds the general structure for conversation history to the new
assistant.
Right now we have a placeholder button in the assistant panel that will
toggle a picker containing some placeholder saved conversations.
Release Notes:
- N/A
This PR adds a new development credentials provider for the purpose of
streamlining local development against production collab.
## Problem
Today if you want to run a development build of Zed against the
production collab server, you need to either:
1. Enter your keychain password every time in order to retrieve your
saved credentials
2. Re-authenticate with zed.dev every time
- This can get annoying as you need to pop out into a browser window
- I've also seen cases where if you re-auth too many times in a row
GitHub will make you confirm the authentication, as it looks suspicious
## Solution
This PR decouples the concept of the credentials provider from the
keychain, and adds a new development credentials provider to address
this specific case.
Now when running a development build of Zed and the
`ZED_DEVELOPMENT_AUTH` environment variable is set to a non-empty value,
the credentials will be saved to disk instead of the system keychain.
While this is not as secure as storing them in the system keychain,
since it is only used for development the tradeoff seems acceptable for
the resulting improvement in UX.
Release Notes:
- N/A
This aligns the Windows platform implementation with a code style
similar to macOS platform, eliminating most of the `Cell`s and
`Mutex`es. This adjustment facilitates potential future porting to a
multi-threaded implementation if required.
Overall, this PR made the following changes: it segregated all member
variables in `WindowsPlatform` and `WindowsWindow`, grouping together
variables that remain constant throughout the entire app lifecycle,
while placing variables that may change during app runtime into
`RefCell`.
Edit:
During the code refactoring process, a bug was also fixed.
**Before**:
Close window when file has changed, nothing happen:
https://github.com/zed-industries/zed/assets/14981363/0bcda7c1-808c-4b36-8953-a3a3365a314e
**After**:
Now `should_close` callback is properly handled
https://github.com/zed-industries/zed/assets/14981363/c8887b72-9a0b-42ad-b9ab-7d0775d843f5
Release Notes:
- N/A
This implements `app_version` on Linux by using an optional,
compile-time `RELEASE_VERSION` env var that can be set.
We settled on the `RELEASE_VERSION` as the name, since it's similar to
`RELEASE_CHANNEL` which we use in Zed.
cc @ConradIrwin @mikayla-maki
Release Notes:
- N/A
Co-authored-by: Bennet <bennetbo@gmx.de>
This PR increases the length of a shortened Git SHA from 6 to 7
characters.
This matches what GitHub uses.
I also took the opportunity to factor out a common method for computing
a short SHA so that we have a single source of truth for the length that
we're using.
Release Notes:
- Increased the short commit SHA length used by git blame from 6 to 7
characters.
This fixes a race-condition that showed up when trying to restart
Nightly/Preview/...
When running with these release channels, Zed tries to ensure that
there's only one instance of Zed running.
It does that by listening on a TCP socket to which other instances can
connect on start. If the other instance receives a message, it knows
that another Zed instance is running and exits.
On Linux, though, we ran into a race condition:
1. `kill -0`, which checks whether a process is still running, returns
an error, signalling that the old Zed process has exited
2. BUT: the process was still listening on the TCP port.
It seems like that on Linux, process resources aren't guaranteed to be
cleaned up as soon as signal handling stops working for a process.
The fix is to wait until the process is no longer listening on any TCP
sockets.
There's a slight downside to this: GPUI processes that never listen on
any TCP sockets now have to pay the cost of an additional `lsof` call
when restarting. We do think that it's a reasonable tradeoff for now
though, since the other options (extending the platform interface to
provide callbacks, sharing the listening port in the framework, ...)
seem wider-reaching only to fix a very local bug.
Release Notes:
- N/A
Co-authored-by: Bennet <bennetbo@gmx.de>
Originally reported by @mrnugget and @bennetbo
Also, instead of requerying them every frame, we do so whenever buffer
changes.
As a bonus, I modified tree-sitter query for Rust tests.
Release Notes:
- N/A
In Windows platform, using notify to watch file events.
1. in [notify windows
implement](3df0f65152/notify/src/windows.rs (L344)),
we get the full file path, just with `path.join(file_path)`.
2. In [zed worktree
start_backgroud_scan_tasks](d2569afe66/crates/worktree/src/worktree.rs (L679)),
`abs_path` is not unc path, so we get all file events with not unc path.
3. but in [zed worktree
process_event](d2569afe66/crates/worktree/src/worktree.rs (L3619)),
we `strip_prefix` unc path all times, it will always print annoy error.
@mikayla-maki I can't reopen pre closed pr #10501 .
Release Notes:
- N/A
This PR adds a registry for `GitHostingProvider`s.
The intent here is to help decouple these provider-specific concerns
from the lower-level `git` crate.
Similar to languages, the Git hosting providers live in the new
`git_hosting_providers` crate.
This work also lays the foundation for if we wanted to allow defining a
`GitHostingProvider` from within an extension. This could be useful if
we wanted to extend the support to work with self-hosted Git providers
(like GitHub Enterprise).
I also took the opportunity to move some of the provider-specific code
out of the `util` crate, since it had leaked into there.
Release Notes:
- N/A
This PR restructures the way that tools and attachments add information
about the current project to a conversation with the assistant. Rather
than each tool call or attachment generating a new tool or system
message containing information about the project, they can all
collectively mutate a new type called a `ProjectContext`, which stores
all of the project data that should be sent to the assistant. That data
is then formatted in a single place, and passed to the assistant in one
system message.
This prevents multiple tools/attachments from including redundant
context.
Release Notes:
- N/A
---------
Co-authored-by: Kyle <kylek@zed.dev>
Since Windows paths are known to be weird and currently not handled at
all (outside of relative paths that just happen to work), I figured I
would add a windows specific implementation for parsing absolute paths.
It should be functionally the same, of course there's always a chance I
missed an edge case though.
This should fix
- #10849
Note that there are still some cases that will probably break the
current implementation, namely local drives that do not have a drive
letter assigned (not sure how to handle those). There's also UNC paths
but I don't know how important those are at the moment (I'll allow
myself to assume not at all)
Release Notes:
- N/A
Fixed various small issues on Linux, mainly on Wayland.
Apart from the first commit (which should be self-describing), the other
commits have a description explaining the issue and what they do.
caadc58bea should fix
https://github.com/zed-industries/zed/issues/11037
Release Notes:
- N/A
This PR replaces all pointer events on X11 with their XI2 equivalents,
which fixes problems with scroll events not being reported when a mouse
button is down. Additionally it closes#11206 by resetting the tracked
global scroll valulator position with `None` on a leave event to prevent
a large scroll delta if scrolling is done outside the window. Lastly, it
resolves the bad window issue kvark was having.
Release Notes:
- Fixed X11 Scroll snapping (#11206 ).
---------
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
Release Notes:
- N/A
This changes the first click detection in Wayland by requiring first
click after the keyboard loses focus, and after a `wl_pointer` enters a
window that has keyboard focus
This PR refactors the code pertaining to Git hosting providers to make
it more uniform and easy to add support for new providers.
There is now a `GitHostingProvider` trait that contains the
functionality specific to an individual Git hosting provider. Each
provider we support has an implementation of this trait.
Release Notes:
- N/A
This PR adjusts the names of the negated style methods by moving the
`neg_` to after the property name instead of before.
This will help keep related style methods grouped together in
completions.
It also makes it a bit clearer that the negation applies to the value.
### Before
```rs
div()
.neg_mx_1()
.neg_mt_2()
```
### After
```rs
div()
.mx_neg_1()
.mt_neg_2()
```
Release Notes:
- N/A
This PR makes the `border` methods require an explicit width instead of
defaulting to 1px.
This breaks convention with Tailwind, but it makes GPUI more consistent
with itself. We already have an edge case where the parameterized method
had to be named `border_width`, since `border` was taken up by an alias
for the 1px variant.
### Before
```rs
div()
.border()
.border_t()
.border_r()
.border_b()
.border_l()
.border_width(px(7.))
```
### After
```rs
div()
.border_1()
.border_t_1()
.border_r_1()
.border_b_1()
.border_l_1()
.border(px(7.))
```
Release Notes:
- N/A
Fixed autoclosing and made it recognize all ZON (Zig Object Notation)
files.
- Fixed single and double quotes not autoclosing for zig
- Fixed ZON file recognition
- Removed angle brackets autoclosing in zig as they are not used
Release Notes:
- N/A
The DisplayPoint returned from the position map is only valid at the
snapshot in the position map.
Before this change we were erroneously using it to index into the
current version of the buffer.
Release Notes:
- Fixed a panic caused by a race condition in hover.
This changes the remoting prompts to use `PromptLevel::Warning` instead
of `PromptLevel::Destructive`.
In #11015 we decided to apply PromptLevel::Destructive to prompts other
than the new path picker. However, we did not notice that this breaks
confirmation with the keyboard, so it should really only be used in
specific situations (e.g. replacing a file with the remote "save as"
picker, because it matches the behavior of the macOS file dialog).
Release Notes:
- N/A
This PR updates the system requirements in the docs to note that Linux
and Windows can be built from source.
This matches the messaging we have in place on the [download
page](https://zed.dev/download).
Release Notes:
- N/A
We were retrieving task context incorrectly with a display point row as
the location argument, and not the actual row in the buffer.
Release Notes:
- N/A
Hey guys! `emmet-language-server` author here. Thank you so much for the
amazing editor!
This PR adds more languages to the list for the `emmet-language-server`
to attach to.
I have a question though, I saw that you guys don't differentiate yet
between `JavaScript` and `JSX` files. I know that the tree-sitter parser
for `js` comes with the ability to parse both but we still need to make
that difference. Is that part of the plan? or do you have a reason for
doing that?
Aside from that, I've still added support for `JavaScript` files since
is important to have emmet completions in `JSX` files, but I would like
to know what are your thoughts on that since doing this may pollute the
completions in `.js` files.
And one last thing, the emmet language server accepts more filetypes
such as `pug`, `sass`, `scss` and `less` files, which are not currently
supported by zed. Should I create some extensions to add grammar support
to those files later? Should those extensions be part of the zed repo?
I'm just thinking that those are sort of core languages.
Aside from that, let me know if there's anything left to do on my side.
Greetings!
Fixes#10654.
Release Notes:
- N/A
- Unifies spacing between left and right sides of the tab bar
- Use the default icon color for `end_slot` tools. This should help more
clearly differentiate when forward or backward navigation is disabled
due to the tools on the other side not looking so much like the disabled
navigation arrows.
- Rework the TabBar implementation in `pane.rs` to directly pass in
items to the `start_slot` instead of an unneeded extra horizontal
layout.
Left side:
Right side:
Release Notes:
- Standardized some Tab Bar UI elements. You many notice some slight
spacing or color changes.
The CI was green at the time I've merged Rust 1.78, but a change that
violated clippy::empty_doc has slipped through into main in the
meantime. Mea culpa, I should've reran the CI.
Release Notes:
- N/A
Notable things I've had to fix due to 1.78:
- Better detection of unused items
- New clippy lint (`assigning_clones`) that points out places where assignment operations with clone rhs could be replaced with more performant `clone_into`
Release Notes:
- N/A
This fixes a tricky intermittent issue I was seeing, where failed to
chunk certain files correctly because of the way we reuse Tree-sitter
`Parser` instances across parses.
I've also accounted for leading comments in chunk boundaries, so that
items are grouped with their leading comments whenever possible when
chunking.
Finally, we've changed the `debug project index` action so that it opens
a simple debug view in a pane, instead of printing paths to the console.
This lets you click into a path and see how it was chunked.
Release Notes:
- N/A
---------
Co-authored-by: Marshall <marshall@zed.dev>
This PR fixes the links in the README to account for the changes in the
docs structure.
Also, somehow the README had gotten added with `\r\n` newlines, so I
changed it back to `\n` newlines.
Release Notes:
- N/A
Since Wayland doesn't have a way for windows to activate themselves,
currently, when you click on a link in Zed, the browser window opens in
the background.
This PR implements the `xdg-activation` protocol to get an activation
token, which the browser can use to raise its window.
https://github.com/zed-industries/zed/assets/71973804/8b3456c0-89f8-4201-b1cb-633a149796b7
Release Notes:
- N/A
This PR sets up deployments for the docs using mdBook.
Right now the new docs are hosted at
[zed.dev/docs2](https://zed.dev/docs2/).
The docs are deployed to Cloudflare Pages on merges to `main`, and we
have a Cloudflare Worker that routes traffic from `zed.dev/docs2` to the
docs deployment.
We can iterate on the docs for a bit, and then promote them to
`zed.dev/docs` when we're all ready for the switchover.
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Adds a supermaven provider for completions. There are various other
refactors amidst this branch, primarily to make copilot no longer a
dependency of project as well as show LSP Logs for global LSPs like
copilot properly.
This feature is not enabled by default. We're going to seek to refine it
in the coming weeks.
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Since it's not longer possible to setup a local elixir LSP, @maxdeviant
proposed to look for `next-ls` and `lexical` in path first, just like
it's already done for `elixir_ls`.
For context take a look at #11297 (starting from [this
comment](https://github.com/zed-industries/zed/issues/11297#issuecomment-2091095537)).
Release Notes:
- N/A
This downloads Nightly/Preview releases on Linux and copies the contents
the `zed-<channel>.app` to `~/.local`.
What's missing:
- Check if we're not installed in ~/.local and abort
- Update `.desktop` file
Release Notes:
- N/A
The ability to confirm the file deletion prompt by pressing "Enter" was
broken in #11015
Release Notes:
- Restored the ability to confirm a prompt by pressing "Enter" when
deleting/trashing files
* clear their selections on focus lost
* allow reverting diff hunks when the caret is inside of the deleted
hunk diff editor block
Release Notes:
- N/A
This undoes the changes from #11333 and uses the path of the `.desktop`
file instead.
According ot the spec
(https://specifications.freedesktop.org/desktop-entry-spec/desktop-entry-spec-latest.html)
the filename and path of the `desktop` file are used to determine the
desktop file ID.
This is enough to match the windows (which have the same WMClass/app-id)
with the desktop entry.
Release Notes:
- N/A
Since we do want to have different versions of Zed running on the same
Linux install, we need to give them different application IDs so they're
not grouped together as the same application.
This changes the app_id depending on the releaes channel and, crucially,
it also matches them up with the bundle identifiers that we use on
macOS.
Release Notes:
- N/A
Release Notes:
- N/A
While developing [Loungy](https://loungy.app), I noticed that everytime
I wake my laptop, Loungy starts consuming 100% CPU. I traced it down to
`start_display_link` as there was this error message at the time of wake
up:
```
[2024-05-02T05:02:31Z ERROR util] /Users/matthias/zed/crates/gpui/src/platform/mac/window.rs:420: could not create display link, code: -6661
```
The timeline is this:
1. The application is hidden with `cx.hide()`
2. The system is put to sleep and later woken up
3. `window_did_change_screen` would trigger immediately after wakeup,
calling `start_display_link`
4. `start_display_link` fails catastrophically as `DisplayLink::new`
starts hogging all the CPU for some reason?
5. throws the error message above
6. Once the window is opened, `window_did_change_occlusion_state` it
retriggers `start_display_link` and the CPU issue subsides
As an attempt to do things better when showing diff hunks, store diff
base as Rope, not String, to have cheaper clones when the diff base text
is reused, e.g. creating another buffer with the diff base text for hunk
diff expanding.
Release Notes:
- N/A
This chunking strategy uses the existing `outline` query to chunk files.
We try to find chunk boundaries that are:
* at starts or ends of lines
* nested within as few outline items as possible
Release Notes:
- N/A
Co-Authored-By: Mikayla <mikayla@zed.dev>
In a fit of ill-advisedness I called these things remote projects;
forgetting that remote project is also what we call collaboratively
shared projects.
Release Notes:
- N/A
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Bennet <bennetbo@gmx.de>
This PR updates the Elixir extension to respect the LSP settings for
`elixir-ls`:
```json
"lsp": {
"elixir-ls": {
"settings": {
"dialyzerEnabled": false
}
}
}
```
```
Received workspace/didChangeConfiguration
Received client configuration via workspace/didChangeConfiguration
%{"dialyzerEnabled" => false}
Loaded DETS databases in 33ms
Loaded DETS databases in 10ms
Compiling 65 files (.ex)
```
Release Notes:
- N/A
Release Notes:
- Fixed#10888
This patch addresses behavior of
`Editor::move_to_{beginning|end}_of_line`. It adds a setting,
`stop_at_soft_wraps` when defining a keymap for the
`editor::MoveToBeginningOfLine` and `editor::MoveToEndOfLine` actions.
When `true`, it causes movement to the either end of the line (via, for
example Home or End), to go to the logical end, as opposed to the
nearest soft wrap point in the respective direction.
---------
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
This allows function call (i.e. snippet) completion with
`typescript-language-server`. So far that didn't work, because
`typescript-language-server` doesn't respond with `insertText` when
getting the completions, but only when then sending
`completionItem/resolve` requests. See:
https://github.com/hrsh7th/nvim-cmp/issues/646#issuecomment-992765479
What this PR does is to support text edits in the response to
`completionItem/resolve`, which means updating the completion item.
It then enables this feature by default for
`typescript-language-server`.
TODOs:
- [x] Make this work over collab
- [x] Test that this doesn't break existing language server support
- [x] Refactor duplicated code
Release Notes:
- Added support for function call completion when using
`typescript-language-server`. This will result in parameters being
added, which can then be changed and navigated with `<tab>`. For this to
work with `typescript-language-server`, the documentation for a given
completion item needs to be resolved, meaning that if one types very
quickly and accepts completion before `typescript-language-server` could
respond with the documentation, no full function completion is used.
Demo:
https://github.com/zed-industries/zed/assets/1185253/c23ebe12-5902-4b50-888c-d9b8cd32965d
I was experiencing hang, and we blamed it on spawning a few hundred git
processes
simultaneously.
cc @MrNugget
Release Notes:
- Fixed slowness with hundreds of buffers open doing git blame.
Co-Authored-By: Mikayla <mikayla@zed.dev>
Release Notes:
- Show server name in the titlebar for remote projects
Co-authored-by: Mikayla <mikayla@zed.dev>
This PR cleans up the `Indicator` component:
- Renamed `IndicatorStyle` to `IndicatorKind` and made it private.
- Fixed `Indicator::bar()` to construct an indicator using the right
`IndicatorKind`.
- Removed the `IndicatorIcon`, since we didn't actually end up using it.
Release Notes:
- N/A
One contributor to some beach-balls was that the main thread was calling
block_with_timeout, but the timeout never fired.
Release Notes:
- Reduced main thread hangs under very high system load
This PR replaces the rem size literals with the `BASE_REM_SIZE_IN_PX`
constant.
This way we can retain our source of truth for the rem size that we're
designing against.
Release Notes:
- N/A
This PR updates the new assistant to use the new (temporary) icon in the
status bar to distinguish it.
We added the icon in #11257, but hadn't wired it up.
Release Notes:
- N/A
We are still getting comments from users saying they didn't know we had
extensions until just now. This doesn't fix anything for existing users,
but it helps make new users more aware, earlier on. There's probably
more we need to do for discoverability, but this feels like it should
help.
Release Notes:
- N/A
With this patch applied I can see the following line in the test output:
test tests::random_channel_buffer_tests::test_random_channel_buffers has
been running for over 60 seconds
Without it I run in a failure with 'Invalid keystroke `cmk-,`
Release Notes:
- N/A
---------
Co-authored-by: Max Linke <kain88-de@users.noreply.github.com>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Part of https://github.com/zed-industries/zed/issues/4523
Added two new actions with the default keybindings
```
"cmd-'": "editor::ToggleHunkDiff",
"cmd-\"": "editor::ExpandAllHunkDiffs",
```
that allow to browse git hunk diffs in Zed:
https://github.com/zed-industries/zed/assets/2690773/9a8a7d10-ed06-4960-b4ee-fe28fc5c4768
The hunks are dynamic and alter on user folds and modifications, or
toggle hidden, if the modifications were not adjacent to the expanded
hunk.
Release Notes:
- Added `editor::ToggleHunkDiff` (`cmd-'`) and
`editor::ExpandAllHunkDiffs` (`cmd-"`) actions to browse git hunk diffs
in Zed
Previously, a failure to embed the search query (due to a rate limit
error) would appear the same as if there were no results.
* Avoid repeatedly embedding the search query for each worktree
* Unify tasks for searching all worktree
Release Notes:
- N/A
This PR fixes scrollbar auto-show feature when there're not visible
cursors. The intial behavior was broken in #11147.
The problem is that `selections` only contains visible selections, so
the `if` with `non_visible_cursors |= true` is only visited in rare edge
cases when we have at least part of the selection still visible on the
screen. But when we scroll far enough from the cursor,
`non_visible_cursors` keeps its default `false` value, which is
incorrect.
Release Notes:
- N/A
This PR updates the Homebrew installation instructions for the Preview
release, which has been migrated to ```homebrew/cask``` as
```zed@preview``` (see
[Commit](bad25d79e1)).
Release Notes:
- N/A
Note: You shouldn't use the `unstable.ui_density` setting – it is only
being added for testing and to enable new UI components to be built with
density in mind. Don't expect this to work well, or at all right now.
Adds some of the basic wiring we'll need to start scaling UI elements
throughout the app based on a desired density setting.
Release Notes:
- N/A
Co-Authored-By: Mikayla <mikayla@zed.dev>
My Zed was running out with collab + chat + recent projects + two splits
on a large monitor
Release Notes:
- N/A
Co-authored-by: Mikayla <mikayla@zed.dev>
This PR adds a suggestion for the new [SCSS
extension](https://github.com/bajrangCoder/zed-scss) when `.scss` files
are opened.
Release Notes:
- Added a suggestion for the SCSS extension when `.scss` files are
opened.
For #11084 In the case of an indentation in front of the current line,
it may also be necessary to deal with the start point of the selected
range
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This PR adds `language_servers` settings for Elixir and HEEX to ensure
they both only use Elixir LS by default.
Eventually we'd like to have these provided by the Elixir extension, but
there are some outstanding questions on the design.
For now we can just use the built-in default settings to ensure a good
out-of-the-box experience for Elixir users.
Release Notes:
- N/A
This PR refines the UX of editing a previous message, including the
following:
- Focus the prev message body editor on double-click
- Restore previous body text on cancel
- Cancel pending completion upon submission of previous message
- Drive-by: Remove min height on composer editor
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <marshall@zed.dev>
We have two cloudflare workers that let us serve some assets of this repo
from Cloudflare.
*`open-source-website-assets` is used for `install.sh`
*`docs-proxy` is used for `https://zed.dev/docs`
On push to `main`, both of these (and the files they depend on) are uploaded to Cloudflare.
### Deployment
These functions are deployed on push to main by the deploy_cloudflare.yml workflow. Worker Rules in Cloudflare intercept requests to zed.dev and proxy them to the appropriate workers.
### Testing
You can use [wrangler](https://developers.cloudflare.com/workers/cli-wrangler/install-update) to test these workers locally, or to deploy custom versions.
Welcome to Zed, a high-performance, multiplayer code editor from the creators of [Atom](https://github.com/atom/atom) and [Tree-sitter](https://github.com/tree-sitter/tree-sitter).
## Installation
You can [download](https://zed.dev/download) Zed today for macOS (v10.15+).
Support for additional platforms is on our [roadmap](https://zed.dev/roadmap):
- Linux ([tracking issue](https://github.com/zed-industries/zed/issues/7015))
- Windows ([tracking issue](https://github.com/zed-industries/zed/issues/5394))
- Web ([tracking issue](https://github.com/zed-industries/zed/issues/5396))
For macOS users, you can also install Zed using [Homebrew](https://brew.sh/):
```sh
brew install --cask zed
```
Alternatively, to install the Preview release:
```sh
brew tap homebrew/cask-versions
brew install zed-preview
```
## Developing Zed
- [Building Zed for macOS](./docs/src/developing_zed__building_zed_macos.md)
- [Building Zed for Linux](./docs/src/developing_zed__building_zed_linux.md)
- [Building Zed for Windows](./docs/src/developing_zed__building_zed_windows.md)
See [CONTRIBUTING.md](./CONTRIBUTING.md) for ways you can contribute to Zed.
Also... we're hiring! Check out our [jobs](https://zed.dev/jobs) page for open roles.
## Licensing
License information for third party dependencies must be correctly provided for CI to pass.
We use [`cargo-about`](https://github.com/EmbarkStudios/cargo-about) to automatically comply with open source licenses. If CI is failing, check the following:
- Is it showing a `no license specified` error for a crate you've created? If so, add `publish = false` under `[package]` in your crate's Cargo.toml.
- Is the error `failed to satisfy license requirements` for a dependency? If so, first determine what license the project has and whether this system is sufficient to comply with this license's requirements. If you're unsure, ask a lawyer. Once you've verified that this system is acceptable add the license's SPDX identifier to the `accepted` array in `script/licenses/zed-licenses.toml`.
- Is `cargo-about` unable to find the license for a dependency? If so, add a clarification field at the end of `script/licenses/zed-licenses.toml`, as specified in the [cargo-about book](https://embarkstudios.github.io/cargo-about/cli/generate/config.html#crate-configuration).
Welcome to Zed, a high-performance, multiplayer code editor from the creators of [Atom](https://github.com/atom/atom) and [Tree-sitter](https://github.com/tree-sitter/tree-sitter).
## Installation
You can [download](https://zed.dev/download) Zed today for macOS (v10.15+).
Support for additional platforms is on our [roadmap](https://zed.dev/roadmap):
- Linux ([tracking issue](https://github.com/zed-industries/zed/issues/7015))
- Windows ([tracking issue](https://github.com/zed-industries/zed/issues/5394))
- Web ([tracking issue](https://github.com/zed-industries/zed/issues/5396))
For macOS users, you can also install Zed using [Homebrew](https://brew.sh/):
```sh
brew install --cask zed
```
Alternatively, to install the Preview release:
```sh
brew install --cask zed@preview
```
## Developing Zed
- [Building Zed for macOS](./docs/src/development/macos.md)
- [Building Zed for Linux](./docs/src/development/linux.md)
- [Building Zed for Windows](./docs/src/development/windows.md)
See [CONTRIBUTING.md](./CONTRIBUTING.md) for ways you can contribute to Zed.
Also... we're hiring! Check out our [jobs](https://zed.dev/jobs) page for open roles.
## Licensing
License information for third party dependencies must be correctly provided for CI to pass.
We use [`cargo-about`](https://github.com/EmbarkStudios/cargo-about) to automatically comply with open source licenses. If CI is failing, check the following:
- Is it showing a `no license specified` error for a crate you've created? If so, add `publish = false` under `[package]` in your crate's Cargo.toml.
- Is the error `failed to satisfy license requirements` for a dependency? If so, first determine what license the project has and whether this system is sufficient to comply with this license's requirements. If you're unsure, ask a lawyer. Once you've verified that this system is acceptable add the license's SPDX identifier to the `accepted` array in `script/licenses/zed-licenses.toml`.
- Is `cargo-about` unable to find the license for a dependency? If so, add a clarification field at the end of `script/licenses/zed-licenses.toml`, as specified in the [cargo-about book](https://embarkstudios.github.io/cargo-about/cli/generate/config.html#crate-configuration).
// Listen for project index status and update the ProjectIndexTool directly
// TODO: setup a better description based on the user's current codebase.
Self{project_index,fs}
}
}
implLanguageModelToolforProjectIndexTool{
typeInput=CodebaseQuery;
typeOutput=ProjectIndexOutput;
typeView=ProjectIndexView;
fnname(&self)-> String{
"query_codebase".to_string()
}
fndescription(&self)-> String{
"Semantic search against the user's current codebase, returning excerpts related to the query by computing a dot product against embeddings of chunks and an embedding of the query".to_string()
constMULTI_LINE_MESSAGE: &str="In 2010, the movies nominated for the 82nd Academy Awards, for films released in 2009, were as follows. Note that 2010 nominees were announced for the ceremony happening in that year, but they honor movies from the previous year";
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
