Using compiler explorer I saw that the compiler wasn't clever enough to
optimise away the branches in the masking code. I thought the compiler
would have a better chance if we always branched, which [turned out to
be the case](https://godbolt.org/z/PM594Pz18).
Running the benchmarks the biggest benefit I saw was:
```
push/65536 time: [2.9067 ms 2.9243 ms 2.9417 ms]
thrpt: [21.246 MiB/s 21.373 MiB/s 21.502 MiB/s]
change:
time: [-8.3452% -7.2617% -6.2009%] (p = 0.00 < 0.05)
thrpt: [+6.6108% +7.8303% +9.1050%]
Performance has improved.
```
But I did also see some regressions:
```
slice/4096 time: [66.195 µs 66.815 µs 67.448 µs]
thrpt: [57.915 MiB/s 58.464 MiB/s 59.012 MiB/s]
change:
time: [+3.7131% +5.1698% +6.6971%] (p = 0.00 < 0.05)
thrpt: [-6.2768% -4.9157% -3.5802%]
Performance has regressed.
```
Release Notes:
- N/A
Fixes https://github.com/zed-industries/zed/issues/41260
After experimenting and reading through the implementation of OpenSSH
stack on Windows, it looks like batch mode precludes use of passwords.
In the listing
b8c08ef9da/sshconnect2.c (L417),
the last field of each `Authmode` struct is a pointer to the config
value that *disables* that particular mode. In this case, `keyboard`
(interactive) and `password` modes are both disabled if batch mode is
used. We should therefore fall back to `scp` if `sftp` fails rather than
to fail outright.
Release Notes:
- N/A
Closes#40898
Release Notes:
- Fixed an issue where attempting to add or update a key binding in the
keymap editor with an empty `keymap.json` file would fail
Closes https://github.com/zed-industries/zed/issues/41267
The only downside would be the fact that a Zed window will appear behing
the version modal, but this is a limitation for all "window-less"
actions currently.
Release Notes:
- Made "About Zed" menu entry to work when all Zed windows are closed
Updates to acp crate 0.7, which allows us to send information about the
client to the Agent.
In the future, we can also use the AgentInfo on the response for
internal metrics.
Release Notes:
- N/A
Fixes a regression introduced in
https://github.com/zed-industries/zed/pull/39857. As for the exact
reason this causes this issue I am not yet sure will investigate (as per
the todos in code)
Fixes ZED-23R
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Previously, the hover popover delay was implemented using two
overlapping timers, which caused the minimum delay to always be at least
HOVER_REQUEST_DELAY_MILLIS, regardless of the hover_popover_delay
setting.
This change updates the logic to wait for hover_popover_delay only,
ensuring the total delay is always equals to hover_popover_delay . As a
result, the hover popover now appears after the intended delay, matching
the user's configuration more accurately.
Release Notes:
- Improved hover popover respecting settings delay correctly
This PR fixes some instances where we were displaying action names in
quotes instead of in backticks.
Also fixed some mentions of using an action to open the settings file,
as this has changed after the release of the settings UI.
Release Notes:
- N/A
When trying to split and clone a non clone-able workspace item we now
attempt split and move instead of doing nothing. Additionally we disable
the split menu buttons if we can't split the active item at all.
Release Notes:
- Improved handling of unsplittable panes
We only use it a handful of times and the default amount of threads
(logical cpu core number) its spawns is overkill for this. This also
gives the threads names oppose to being labeled `<unknown>`
Release Notes:
- N/A *or* Added/Fixed/Improved ...
The issues is that the closure supplied to `request_measured_layout`
could be run multiple times with differing `known_dimensions`. This in
turn will mean we truncate the font runs once, inserting a multibyte
char at the end but then in the next iteration use those truncated runs
for possible the original untruncated string which has multibyte
characters overlapping the now truncated run end resulting in a faulty
utf8 boundary index.
Solution to this is simple, truncate a clone of the runs when needed
instead of modifying the original.
Fixes https://github.com/zed-industries/zed/issues/36925
Fixed ZED-2FF
Fixes ZED-2KM
Fixes ZED-2KK
Fixes ZED-1FF
Fixes ZED-255
Fixes ZED-2JD
Fixes ZED-2FX
Fixes ZED-2K2
Fixes ZED-2JX
Fixes ZED-2GE
Fixes ZED-2FC
Fixes ZED-2GD
Fixes ZED-2HY
Fixes ZED-2HR
Fixes ZED-2FN
Fixes ZED-2GT
Fixes ZED-2FK
Fixes ZED-2EY
Fixes ZED-27E
Fixes ZED-272
Fixes ZED-2EM
Fixes ZED-2CC
Fixes ZED-29V
Fixes ZED-25B
Fixes ZED-257
Fixes ZED-24R
Fixes ZED-24Q
Fixes ZED-23Z
Fixes ZED-227
Release Notes:
- Fixed a crash in text shaping when truncating rendered text
We've been seeing a lot of weird constant rebuilds recently with
rust-anaylzer's check, either with cargo thinking build scripts are too
new timestamp wise or all fingerprints having gone missing somehow
(???). Reading through some related bug reports hints at disabling
incremental potentially working around this for now so let's test that
out
cc https://github.com/rust-lang/cargo/issues/16104
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Split out from https://github.com/zed-industries/zed/pull/40774 to
reduce the size of the reland of that PR (once I figure out the cause of
the issue)
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Adds debugger inline values support for JavaScript, TypeScript, and TSX languages.
Release Notes:
- debugger: Add inline value support for Javascript, TypeScript, and TSX
---------
Co-authored-by: Anthony <anthony@zed.dev>
1. Settings Viewed: Whenever someone opens or refocus the settings ui
via an action
2. Settings Closed: When the settings ui window is closed
3. Settings Navigation Clicked: The category and subcategory that a user
clicked on
4. Settings Error Shown: Whenever an error banner shows up
5. Settings Changed: The setting a user changed through the UI
cc: @katie-z-geer
Release Notes:
- N/A
This PR allows you to define `align="right"` for example to change the
default alignment on **HTML** table columns. This PR also refactors
where we store the alignments in order to make it so you can define it
column based instead of only row based.
See that the `Revenue` column is left aligned instead of the default
`centered`.
**Result**
<img width="1161" height="177" alt="Screenshot 2025-10-25 at 11 01 38"
src="https://github.com/user-attachments/assets/94bda4f0-00c1-4726-a3bd-99b3f2573ef5"
/>
**Code example**
```HTML
<table>
<tr>
<th rowspan="2">Region</th>
<th colspan="2" align="left">Revenue</th>
<th rowspan="2">Growth</th>
</tr>
<tr>
<th>Q2 2024</th>
<th>Q3 2024</th>
</tr>
<tr>
<td>North America</td>
<td>$2.8M</td>
<td>$2.4B</td>
<td>+85,614%</td>
</tr>
<tr>
<td>Europe</td>
<td>$1.2M</td>
<td>$1.9B</td>
<td>+158,233%</td>
</tr>
<tr>
<td>Asia-Pacific</td>
<td>$0.5M</td>
<td>$1.4B</td>
<td>+279,900%</td>
</tr>
</table>
```
Release Notes:
- markdown preview: Add support for `HTML` table column `align`
attribute
Follow-up: https://github.com/zed-industries/zed/pull/39898
Right now, we don't fill the empty column when the current row count is
less than the max row count. This PR fixes that by filling it with an
empty cell. So the table columns don't flow in the wrong direction, as
you can see inside the first screenshot.
**Before**
<img width="1095" height="182" alt="Screenshot 2025-10-24 at 16 09 02"
src="https://github.com/user-attachments/assets/e3abf24e-c190-4bd7-b43a-39f2f01ecd1c"
/>
**After**
<img width="1165" height="178" alt="Screenshot 2025-10-24 at 16 19 17"
src="https://github.com/user-attachments/assets/427c25f9-82a7-498b-a1a2-d71e4c288fe5"
/>
**Code example**
```html
<table>
<tr>
<th rowspan="2">Region</th>
<th colspan="2">Revenue</th>
<th rowspan="2">Growth</th>
</tr>
<tr>
<th>Q2 2024</th>
<th>Q3 2024</th>
</tr>
<tr>
<td>North America</td>
<td>$2.8M</td>
<td>$2.4B</td>
<td>+85,614%</td>
<td>+99%</td> // extra column here
</tr>
<tr>
<td>Europe</td>
<td>$1.2M</td>
<td>$1.9B</td>
<td>+158,233%</td>
</tr>
<tr>
<td>Asia-Pacific</td>
<td>$0.5M</td>
<td>$1.4B</td>
<td>+279,900%</td>
</tr>
</table>
```
**Note** there are no release notes, as the previous PR didn't get
released yet.
Release Notes:
- N/A
Some information in the GDScript documentation page was outdated (like
it still treats Zed if it was a macOS exclusive app) or some details
were missing.
- The `zed-gdscript` URL has been updated with the new owner.
- Pre-requisites added (with netcat included).
- Godot installation steps removed, it's now listed in the
pre-requisites.
- Setup steps simplified and reworded.
The note at the bottom was removed as I didn't see the issue in my end.
Release Notes:
- N/A
## Overview
- document how to keep a per-user debug.json so global launch tasks show
up everywhere (Fixes#39849)
- sanitize REPL terminal text before copying so error blocks can be
copied and opened in buffers (Fixes#40207)
## Design Decisions
- reused the existing user debug file (paths::debug_scenarios_file) and
pointed docs at the zed::OpenDebugTasks command to stay aligned with the
settings UX
- extract a sanitize helper inside TerminalOutput::full_text to strip
\r/null padding while keeping indentation intact, then join the cleaned
lines so clipboard and buffers get readable text
## Testing
- Not run (cargo is unavailable in this environment)
Fixes#39849.
Fixes#40207.
Add support for GithubCopilot /responses endpoint. This gives the
copilot chat provider the ability to use the new GPT-5 codex model and
any other model that lacks support for /chat/copmletions endpoint.
Closes#38858
Release Notes:
- Add support for GithubCopilot /responses endpoint.
# Added
1. copilot_response.rs that has the /response endpoint types
2. uses response endpoint if model does not support /chat/completions.
3. new into_copilot_response() to map LanguageCompletionEvents to
Request.
4. new map_stream() to map response stream event to
LanguageCompletionEvents and tests.
5. Fixed a bug where trying to parse response for non streaming for
/chat/completion was failing
# Notes
There is a pr open - https://github.com/zed-industries/zed/pull/39989
for adding /response support for OpenAi and OpenAi compatible API.
Altough they share some similarities (copilot api seems to mirror openAi
directly) ive simplified some stuff and tried to keep it the same with
the vscode-chat implementation where possible. There might be a case for
code reuse but i think keeping them separate for now should be ok.
# Tool Calls
<img width="716" height="670" alt="Screenshot from 2025-10-15 17-12-30"
src="https://github.com/user-attachments/assets/14e88a52-ba8b-4209-8f78-73d15034b1e0"
/>
# Image
<img width="923" height="494" alt="Screenshot from 2025-10-21 02-02-26"
src="https://github.com/user-attachments/assets/b96ce97c-331e-45cb-b5b1-7aa10ed387b4"
/>
Very often, when I'm testing or playing around with the zoom feature,
including the agent panel, I find myself missing one quick action that
would bring everything back to normal. That's what `ResetAllZoom` does.
If you have customized your zoom level in all areas of Zed, that action
returns everything to its default state. Similarly, if you're playing
around with zoom just in the agent panel, `ResetAgentZoom` does the same
in that context.
Release Notes:
- Added the `ResetAllZoom` and `ResetAgentZoom ` actions, allowing to
return the zoom level across the whole app and/or just in the agent
panel to its default/original value.
Closes https://github.com/zed-industries/zed/issues/41094
This PR adds the `agent_buffer_font_size` settings to be scaled in the
same proportion as the agent panel's UI font size, which was the only
setting that was being accounted for. This is something that I forgot to
do when we broke down the agent panel's font size controls into these
two values.
Release Notes:
- agent: Fixed an issue where the agent panel's buffer and UI font size
wouldn't scale proportionally.
Closes#40589
Replaced `System::new_all()` with `System::new_with_specifics` to fetch
only essential process information and exclude non-main threads from the
process list
after fix:
<img width="641" height="474" alt="image"
src="https://github.com/user-attachments/assets/32335552-2f7a-4317-8c01-f37b2eadfdc1"
/>
Release Notes:
- Fix duplicate process entries in WSL debug attach list
Update `project::buffer_store::BufferStore.save_buffer_as` in order to
correctly update the `path_to_buffer_id` hash map, ensuring that the
currently open file's path is dissociated from the buffer's id, to
prevent the new buffer from being open when trying to open the original
file.
Closes#29783
Release Notes:
- Fixed issue where using `workspace: save as` would prevent users from
opening the original file from which the new file was created
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
This PR removes the behavior that the number_field changes focus to the
previous element when using the decrement button.
I mainly noticed this while decreasing the tab-size of a language, since
it there closes the page...
Please note that I am unsure what if any purpose this code has.
I was unable to find a use case and since it is not present in the
`increment_handler` I guess it should never have been here
---
Release Notes:
* Fixed wrongly focus previous element on number_field decrement
Using the cool, [recently
added](https://github.com/zed-industries/zed/pull/40940) `focus-visible`
support in some components. This will be particularly nice in the
settings UI, as it will not display the focus styles if you're
navigating it with a pointer device as opposed to the keyboard.
Release Notes:
- N/A
Just got a new Windows machine and realized that the rules library empty
state was completly busted. Ended up also adding some little UI tweaks
to make it better for both Windows and Linux.
Release Notes:
- N/A
Closes#40351
The leak mainly showed up in the appearance page because it had a lot of
dropdown menus. The problem occurred because the drop-down menus were
creating a new entity on each frame instead of using the
`window.use_state...` API.
Release Notes:
- settings ui: Fixed memory leak in UI
---------
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
Set a TLS bit to skip invoking the crash handler when a detached thread
panics.
cc @P1n3appl3 - is this at odds with what we need the crash handler to
do?
May close#39289, cannot repro without a nightly build
Release Notes:
- Fixed extension panics crashing Zed on Linux
Co-authored-by: dino <dinojoaocosta@gmail.com>
Closes#40581
Release Notes:
- git: No longer save clean files when staging (to avoid triggering
unnecessary rebuilds in external file watchers like vite)
Closes https://github.com/zed-industries/zed/issues/38453
Current `Buffer` API only allows getting buffer text with `\n` line
breaks — even if the `\r\n` was used in the original file's text.
This it not correct in certain cases like LSP formatting, where language
servers need to have original document context for e.g. formatting
purposes.
Added new `Buffer` API, replaced all buffer LSP registration places with
the new one and added more tests.
Release Notes:
- Fixed ESLint linebreak-style errors by preserving line endings in LSP
communication
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Previously we had `Context` and `ContextStore` in both `agent_ui` (used
to store context for the inline assistant) and `assistant_context` (used
for text threads) which is confusing.
This PR makes it so that the `assistant_context` concepts are now called
`TextThread*`, the crate was renamed to `assistant_text_thread`
Release Notes:
- N/A
This PR does two related things:
- First, it gets rid of the undifferentiated `RepositoryEvent::Updated`
in favor of three new events that have clearer definitions:
`BranchChanged`, `StashEntriesChanged`, and `StatusesChanged`. An
implication of this is that we no longer emit a `RepositoryEvent` unless
some git state changed; previously we would emit `RepositoryUpdated`
after doing a git status scan even if no statuses changed.
- Second, it changes the subscription strategy of the project diff to
make it update more robustly. Previously, the project diff only
subscribed to the `GitStore`, so it relied on getting a `GitStoreEvent`
when some buffer's diff hunks changed, even if the git status of the
buffer's file didn't change (e.g. a second hunk in a file that was
already modified). After this PR, it also subscribes to the individual
`BufferDiff` entities for buffers that have a git status, so the
`GitStore` is freed from that responsibility. This also fixes some real
cases where the previous strategy was not effective in keeping the
project diff up to date (captured in a test).
Release Notes:
- Fixed some cases where the project diff would fail to update in
response to git events.
We still see a bunch of panics here but the default slicing panic
doesn't tell which side of the range is bad
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Before, inlay chunks were retrieved from the cache based on actualized
anchor ranges, but using an old buffer snapshot. Now, update all chunks
and snapshot to the actual before returning the applicable ones.
Follow-up of https://github.com/zed-industries/zed/pull/40183
Release Notes:
- N/A
- Added "ctrl-p" for selecting the previous menu item
- Added "ctrl-n" for selecting the next menu item
Closes#40619
Release Notes:
- Ctrl+P now moves to the previous result; Ctrl+N moves to the next.
This shrinks it from roughly a ~kilobyte to 8 byte, removing a bunch of
memmoves emitted by the compiler. Also `Arc`'s it instead of boxing as
we do clone it a couple times here and there, making that also a fair
bit cheaper
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Fixes ZED-12D
`wasmtime_wasi` might call into tokio futures (to sleep for example)
which requires access to the tokio runtime. So we are required to run
these extensions in the tokio thread pool
Release Notes:
- Fixed extensions causing zed to occasionally panic
I made three significant changes in this PR.
1. `SettingsWindow::fetch_files` now creates
`SettingsUiFile::Project(..)` for any worktree that contains no project
settings.
2. `update_settings_file` now creates an empty settings file if a
worktree doesn't contain one.
3. `open_current_settings_file` also creates a settings file if the
current one doesn't exist.
Release Notes:
- settings ui: Enable editing project settings for worktrees that don't
have a project setting file.
This PR gets the `SettingsWindow` struct to subscribe to all
`Entity<Project>` events and any future project entities that are
created. When a project emits an event that signals a worktree has been
added or removed, the settings window refetches all settings files it
can find.
This fixes a bug where the settings ui would notice some project
settings that were created or opened after the `SettingsWindow` has been
initialized.
I also renamed `LOCAL` file mask to `PROJECT` to be inline with the
`SettingsFile` naming convention.
Release Notes:
- settings ui: Fix bug where project setting files wouldn't be detected
if they were created or opened after while an active settings window is
open
Using `shlex` unconditionally is dangerous as it assumes the underlying
shell is POSIX which is not the case for PowerShell, CMD, or Nushell.
Therefore, whenever we want to quote the args we should utilise our
helper `util::shell::ShellKind::try_quote` which takes into account
which shell is being used to actually exec/spawn the invocation.
Release Notes:
- N/A
---------
Co-authored-by: Lukas Wirth <me@lukaswirth.dev>
This is a refactoring PR to simplify our environment loading code by:
- Getting rid of `EnvironmentErrorMessage` in favor of using
`anyhow::Result` everywhere, with a separate `mpsc` channel to
communicate statuses that will be shown in the activity indicator
- Inlining some functions that were only called once to reduce
indirection
- Removing the separate `direnv` module
Release Notes:
- N/A
Don't prepend the worktree root when using an absolute path from
`Worktree::which`, since that does the wrong thing when running in
wasmtime given two Windows absolute paths. Also don't pass this path to
`node`, since when npm installed it's a sh/cmd wrapper not a JS file.
Part of #39153, also needs a fix on the vscode-langservers-extracted
side (missing shebang for the vscode-html-language-server script).
Release Notes:
- Fixed Zed failing to run the HTML language server in some cases.
Just tidying this up a bit. Really have to fix this Banner component at
some point 😅 Having to add some spacing hacks to make it perfect here
that are not ideal and should be baked into the component.
Release Notes:
- N/A
Now that we have two surface areas that open as separate windows, it's
important they're consistent with one another. This PR make the settings
UI and rules library windows more similar by having them use the same
minimum window size and similar styles for their navbar given they have
fundamentally the same design (nav on the left and content on the
right).
Release Notes:
- N/A
<img width="335" height="236" alt="image"
src="https://github.com/user-attachments/assets/5e09e9ed-f0f3-48df-ac22-032edfc6c114"
/>
Release Notes:
This PR fixes inconsistent use of trailing ellipsis (…) in the MCP
Server menu.
Previously, some menu items (like Add Custom Server…) used hardcoded
ellipses even though they didn’t trigger additional dialogs or steps.
This change removes unnecessary ellipses to align with standard UI/UX
conventions used across Zed’s menus.
---------
Co-authored-by: Danilo Leal <67129314+danilo-leal@users.noreply.github.com>
Follow-up: https://github.com/zed-industries/zed/pull/34655
We should use an opaque fallback color for `panel.overlay_hover`. This
helps when a custom theme doesn’t provide it, nor `element.hover`. For
example, VSCode’s default modern dark theme doesn’t include an
`element.hover` color after import.
Release Notes:
- Fixed an issue where the project panel’s sticky entry could appear
transparent on hover with certain themes.
After clicking on the file drop-down and selecting a file, both the
selected file and the first drop-down entry would be the same file name
instead of overwriting a file name.
Release Notes:
- settings ui: Fix bug where duplicate file names showed in the header
files
Release Notes:
- agent: Improved the editing previous messages UX by focusing in the
agent panel's message editor after regenerating a prompt, instead of
moving focus to the nearest regular buffer.
Closes#39172
This refactors when we resolve UI keybindings in an effort to reduce
flickering whilst painting these: Previously, we would always resolve
these upon creating the binding. This could lead to cases where the
corresponding context was not yet available and no binding could be
resolved, even if the binding was then available on the next presented
frame. Following that, on the next rerender of whatever requested this
keybinding, the keybind for that context would then be found, we would
render that and then also win a layout shift in that process, as we went
from nothing rendered to something rendered between these frames.
With these changes, this now happens less often, because we only look
for the keybinding once the context can actually be resolved in the
window.
| Before | After |
| --- | --- |
|
https://github.com/user-attachments/assets/adebf8ac-217d-4c7f-ae5a-bab3aa0b0ee8
|
https://github.com/user-attachments/assets/70a82b4b-488f-4a9f-94d7-b6d0a49aada9
|
Also reduced cloning in the keymap editor in this process, since that
requiered changing due to this anyway.
Release Notes:
- Fixed some cases where keybinds would appear with a slight delay,
causing a flicker in the process
Closes https://github.com/zed-industries/zed/issues/40047
Closes https://github.com/zed-industries/zed/issues/24798
Closes https://github.com/zed-industries/zed/issues/24788
Before, each editor, even if it's the same buffer split in 2, was
querying for inlay hints separately, and storing the whole inlay hint
twice, in `Editor`'s `display_map` and its `inlay_hint_cache` fields.
Now, instead of `inlay_hint_cache`, each editor maintains a minimal set
of metadata (which area was queried by what task) instead, and all LSP
inlay hint data had been moved into `LspStore`, both local and remote
flavors store the data.
This allows Zed, as long as a buffer is open, to reuse the inlay hint
data similar to how document colors and code lens are now stored and
reused.
Unlike other reused LSP data, inlay hints data is the first one that's
possible to query by document ranges and previous version had issue with
caching and invalidating such ranges already queried for.
The new version re-approaches this by chunking the file into row ranges,
which are queried based on the editors' visible area.
Among the corresponding refactoring, one notable difference in inlays
display are multi buffers: buffers in them are not
[registered](https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#textDocument_didOpen)
in the language server until a caret/selection is placed inside their
excerpts inside the multi buffer.
New inlays code does not query language servers for unregistered
buffers, as servers usually respond with empty responses or errors in
such cases.
Release Notes:
- Reworked inlay hints to be less error-prone
---------
Co-authored-by: Lukas Wirth <lukas@zed.dev>
Co-authored-by: dino <dinojoaocosta@gmail.com>
Co-authored-by: Lukas Wirth <me@lukaswirth.dev>
In practice this just hides the web search tool when not using the Zed
provider
Release Notes:
- Fixed an issue where the web search tool would show up in the profile
selector even when not using a model via Zed Pro
Closes#40874
Release Notes:
- Fixed an issue where migrating settings after v0.208.5+ would
spuriously enable prettier. This fix only affects those who have not
updated or migrated yet. For those who have already updated to version
v0.208.5 or later, placing `"formatter": []` in your settings in the
affected languages will fix the issue.
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
This PR switches us back to the upstream version of `async-tar` and
upgrades to v0.5.1.
This version has the patch we need:
0c18195639.
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/39837
This PR adds support for `colspan` feature that is only supported for
HTML tables. I also fixed an edge case where the right side border was
not applied because it didn't match the total column count.
**Before**
<img width="725" height="179"
alt="499166907-385cc787-fc89-4e6d-bf06-c72c3c0bd775"
src="https://github.com/user-attachments/assets/69586053-9893-4c92-aa89-7830d2bc7a6d"
/>
**After**
<img width="1165" height="180" alt="Screenshot 2025-10-21 at 22 51 55"
src="https://github.com/user-attachments/assets/f40686e7-d95b-45a6-be42-e226e2f77483"
/>
```html
<table>
<tr>
<th rowspan="2">Region</th>
<th colspan="2">Revenue</th>
<th rowspan="2">Growth</th>
</tr>
<tr>
<th>Q2 2024</th>
<th>Q3 2024</th>
</tr>
<tr>
<td>North America</td>
<td>$2.8M</td>
<td>$2.4B</td>
<td>+85,614%</td>
</tr>
<tr>
<td>Europe</td>
<td>$1.2M</td>
<td>$1.9B</td>
<td>+158,233%</td>
</tr>
<tr>
<td>Asia-Pacific</td>
<td>$0.5M</td>
<td>$1.4B</td>
<td>+279,900%</td>
</tr>
</table>
```
**TODO**:
- [x] Add tests for rending logic
- [x] Test all the tables again
cc @bennetbo
Release Notes:
- Markdown: Added support for `colspan` and `rowspan` for HTML tables
---------
Co-authored-by: Zed AI <ai@zed.nl>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Hello,
I am having a great time setting up the editor, but with a few problems
related to the Emacs keymap.
In this PR I have compiled changes in the default `emacs.json` that I
believe make the onboarding smoother for incoming emacs users.
This includes points that may need further discussion and some breaking
changes, although nothing that cannot be reverted with a quick
`keymap.json` overwrite.
(Please let me know if it is better to split up the PR)
### 1. Avoid fallbacks to the default keymap
all platforms:
- `ctrl-g` activating `go_to_line::Toggle` when there is nothing to
cancel
linux / windows:
- `ctrl-x` activating `editor::Cut` on the 1 second timeout
- `ctrl-p` activating `file_finder::Toggle` when the cursor is on the
first character of the buffer
- `ctrl-n` activating `workspace::NewFile` when the cursor is on the
last character of the buffer
### 2. Make all move commands operate on full words
In the current Zed implementation some commands run on full words and
others on subwords.
Although ultimately a matter of user preference, I think it is sensible
to use full words as the default, since that is what is shipped with
emacs.
### ~~3. Cancel selections after copy/cut commands~~ Moved to #40904
Canceling the selection is the default emacs behavior, but the way to
achieve it might need some brushing.
Currently I am using `workspace::SendKeystrokes` to copy ->
cancel(`ctrl-g`), but this has the following problems:
- can only be used in the main buffer (since `editor::Cancel` would
typically close secondary buffers)
- may cause problems downstream if the user overwrites the `ctrl-g`
binding
### ~~4. Replace killring with normal cut/paste commands~~ Moved to
#40905
Ideally Zed would support emacs-like killrings (#25270 and #22490).
However, I understand that making an emacs emulator is not a project
goal, and the Zed team should have a bunch of tasks with higher
priority.
By using a unified clipboard and standard cut/paste commands, we can
provide an experience that is closer to the out-of-the-box emacs
behavior (#33351) while also avoiding some pitfalls of the current
killring implementation (#28715).
### 5. Promote some bindings to workspace commands
- `alt-x` as `command_palette::Toggle`
- `ctrl-x b` and `ctrl-x ctrl-b` as `tab_switcher::Toggle`
---
Release Notes:
- emacs: Fixed a problem where keys would fallback to their default
keymap binding on certain conditions
- emacs: Changed `alt-f` and `alt-b` to operate on full words, as in the
emacs default
- emacs: `alt-x`, `ctrl-x b`, and `ctrl-x ctrl-b` are now Workspace
bindings
Re-lands https://github.com/zed-industries/zed/pull/40719, fixes the
bugs that were discovered with it and improves some more stuff in that
area
Release Notes:
- Fixed a rare issue where the extension page would stutter while
scrolling.
---------
Co-authored-by: Agus Zubiaga <agus@zed.dev>
This PR renames the `agent::QuoteSelection` to
`agent::AddSelectionToThread` _and_ adds it as a menu item in both the
right-click context menu within regular buffers as well as the
"Selection" app menu.
We've received feedback in the past about how hard to discover this
feature is, and after watching [the Syntax podcast
crew](https://www.youtube.com/watch?v=bRK3PeVFfVE) recently struggle
with doing so—and then naturally looking for it in the context menu and
not finding it—it felt like time to push a change. I think the rename +
the availability in these places could help bringing it to surface more.
The same action can be done in Cursor through the `cmd-l` keybinding,
but in Zed, that triggers `editor::SelectLine`, which I don't want to
override by default. However, if you're using Cursor's keymap, then
`cmd-l` does trigger this action, as expected.
<img width="500" height="1812" alt="Screenshot 2025-10-22 at 12 01@2x"
src="https://github.com/user-attachments/assets/dfc2c41c-8d0a-4a1a-8ea1-1bd5d1aa1171"
/>
Release Notes:
- agent: Improves discoverability of the previously called "quote
selection" action—which allows to add a text selection in a buffer as
context within the agent panel—by renaming it to "add selection to
thread" and making it available from the right-click editor context menu
as well as the "Selection" app menu.
The suggested `→` appears tiny, and almost looks like just a dot on my
monitor, and I got quite confused for a while thinking the
`whitespace_map.tab` setting wasn't working properly.
<img width="630" height="105" alt="Image"
src="https://github.com/user-attachments/assets/98feced2-39b3-4734-83e4-b4573b4e52c2"
/>
I think it would be really helpful if `⟶` was suggested instead since
that displays properly.
<img width="625" height="104" alt="Image"
src="https://github.com/user-attachments/assets/176886ab-cf88-4079-90a8-91a8e8182092"
/>
---
I am using `Fira Code` as my font on windows, however when I remove that
config to get the default font, it also still appears the same size. So
I don't believe this is just a font issue on my machine.
Thought I am using Windows, so I would be willing to believe this a
render issue specific to windows
Release Notes:
- N/A
Reverts zed-industries/zed#40719
This unveiled some bigger issues with the UniformList size computations,
which are more crucial than what was fixed here.
Release Notes:
- NOTE: BUGFIX "Fixed a rare issue where the extension page would
stutter while scrolling." was reverted due to some other issues
This simplifies some code and is also more correct in some others (I
believe some of these might've overflowed causing panics in sentry)
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Closes#37726
Release Notes:
- Fixed an issue where the buffer would not regain focus when clicked
while a filename edit was in progress in the project panel.
---------
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
Should be merged with
https://github.com/zed-industries/extensions/pull/3584, which adds
`slang-server` as a new language server, but should be disabled by
default due to an issue with it not initializing on Windows and being a
relatively new language server in general.
Release Notes:
- N/A
Currently running `cargo update` on Zed will break the collab crate
because the versions of sea-orm and sea-orm-macros will not match. This
results in a bunch of noisy warnings from rust-analyzer.
Release Notes:
- N/A
Fixes a bug in https://github.com/zed-industries/zed/pull/39928
The bug caused all completions to appear in bold-face
Release Notes:
- Fixed a bug where bold-face font was applied to the wrong characters
in items in the autocomplete menu
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
In remote connections, we don't detect whether trashing is possible and
generally shouldn't assume it is. This also fixes up some incomplete
logic that was attempting to do that.
Closes#39212
Release Notes:
- No longer show trash option in remote projects
In the process of adding pickers for the theme and icon themes fields in
the settings UI, I felt like there was an improvement opportunity in
regards to where some of these components are stored. The `ui_input`
crate originally was meant only for the text field-like component, which
couldn't be in the regular `ui` crate due to the dependency with
`editor`. Given we had also added the number field there—which is
similar in also having the same dependency—it made sense to think of
this crate more like a home for form-like components rather than for
only one component.
However, we were also storing some settings UI-specific stuff in that
crate, which didn't feel right. So I ended up creating a new directory
within the `settings_ui` for components and moved all the pickers and
the custom input field there. I think this makes it for a cleaner
structure.
Release Notes:
- settings_ui: Added the ability to search for theme and icon themes in
their respective fields.
Follows on from https://github.com/zed-industries/zed/pull/39949.
Again I'm not 100% sure of the intent but I think this is a fix:
`generate_random_string(rng, 4096)` would previously give you a string
of 4096 *chars* which could be anywhere between 4kB and 16kB in bytes.
This seems probably not what was intended, because Ropes generally work
in bytes not chars, including for the offsets used to index into them.
This seems to possibly cause a _regression_ in benchmark performance,
which is surprising because it should generally cause smaller test data.
But, possibly it's doing better at exercising different paths?
cc @mrnugget
Release Notes:
- N/A
This means that existence of activation scripts for venv/virtualenv will
be checked locally either on the host if editing locally, or the remote
by the remote proxy if editing a remote project.
Closes https://github.com/zed-industries/zed/issues/40263
Release Notes:
- N/A
Closes#40748
This PR improves the Centered Layout Padding in settings ui by limiting the numeric stepper to be within valid values and adding a custom schema generated to improve the JSON LSP completions and warnings when editing the setting field manually.
Release Notes:
- settings ui: limit stepper increment for centered padding between 0 and 0.4 and increment by 0.05 now
---------
Co-authored by: Anthony Eid <anthony@zed.dev>
We document the location of the log file in many places, we should just
make it easy to open directly within your file browser. The one thing
here is naming. We use dynamic naming for "reveal" actions in the
project panel, to reflect the right file manager name per OS, but for a
command palette action, I dont think we want to have dynamic code for
the action name, just going with finder at the moment.
Release Notes:
- Added a `zed: reveal log in file manager` action to the command
palette.
- Improves the UI for subfields of dynamic items
- Makes description writing more consistent (add period at the end of
every sentence, fix capitalization of proper names, ensure description
is always in sentence case)
- Other small details, mostly around spacing/padding
Release Notes:
- N/A
Hopefully, this will make the install/configure/uninstall buttons in the
right stand out a bit more and make their presence a bit more obvious
for newcomers.
| Before | After |
|--------|--------|
| <img width="1938" height="1276" alt="Screenshot 2025-10-21 at 10
58@2x"
src="https://github.com/user-attachments/assets/b76115e1-0be2-4d5b-a677-525663d86c7c"
/> | <img width="1938" height="1276" alt="Screenshot 2025-10-21 at 10
53@2x"
src="https://github.com/user-attachments/assets/9e563b71-b11a-4b69-b687-c0b469ca4eec"
/> |
Release Notes:
- Increased affordance of the download button in each extension card in
the extensions page.
Just wanted a single location to point people to for telling them where
to find their log file. I left duplicate text in GitHub Issue templates,
as it seems annoying to have to follow a link when making an issue.
Release Notes:
- N/A
Closes#40608
Release Notes:
- settings_ui: Fixed an issue where tabbing to the nav bar from the
search bar while the nav bar was scrolled would result in the first
_visible_ nav entry being selected, instead of the literal first nav
entry
- settings_ui: Fixed an issue where scrolling the selected nav entry off
screen would cause the keyboard shortcut hint for the focus nav / focus
content binding to dissapear
- settings_ui: Fixed an issue where text input controls could not be
focused via the keyboard
Release Notes:
- Improved text color in LSP document color highlight.
----
Because highlight ranges are implemented using a paint background,
there's no way to control the text color.
I've been thinking about this problem for a long time, want to solve it.
~~Today, I come up with a new idea. Re-rendering the document color text
at the top should solve this problem.~~
#### Update 10/6:
> The previous version is not good, when we have soft wrap text, that
version will not work correct.
Now use exists `bg_segments_per_row` feature to fix text color.
## Before
<img width="563" height="540" alt="image"
src="https://github.com/user-attachments/assets/99722253-0cab-4d2a-a5d1-7f28393bcaed"
/>
## After
<img width="544" height="527" alt="image"
src="https://github.com/user-attachments/assets/a1bf6cdb-0e9c-435d-b14a-6ee9159a63d9"
/>
It keeps popping up in my project searches ... This prevents that. Not
like we are planning on editing that file again.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
In an attempt to figure out what's wrong with `point_to_buffer_offset`
for crash https://github.com/zed-industries/zed/issues/40453. We want to
know which branch among these two is the bad one.
Release Notes:
- N/A
Co-authored-by: Lukas Wirth <lukas@zed.dev>
We were spawning the process on the foreground thread before which can
block an arbitrary amount of time. Likewise we no longer block
deserialization on the terminal loading.
Release Notes:
- Improved startup time on systems with slow process spawning
capabilities
The `vim::visual::Vim.visual_block_motion` method was recently updated
(https://github.com/zed-industries/zed/pull/39355) in order to jump
between buffer rows instead of display rows. However, with this now
being the case, the `break` condition was never met when the motion was
horizontal rather than vertical and soft wrapped lines were used. As
such, this commit udpates the condition to ensure it's always reached,
preventing the hanging from happening.
Release Notes:
- Fixed hang in Vim's visual block motions when updating selections
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
I noticed we had some typos that were getting through CI, but it looks
like the new version of `typos` catches them. So I updated it and fixed
them.
Release Notes:
- N/A
Adds a way to submit feedback about a zeta2 prediction from the
inspector. The telemetry event includes:
- project snapshot (git + unsaved buffer state)
- the full request and response
- user feedback kind and text
Release Notes:
- N/A
I did not bump it for Linux as some machines have smaller disks (~300GB
or so); with Mac, we have at least 1TB on all of our boxes
Release Notes:
- N/A
Following a conversation with the maintainer/owner of
kotlin-language-server, he recommended switching to the official
language server, which is better in many aspects and also more actively
maintained.
Release Notes:
- Made the official Kotlin Language Server the default language server
for Kotlin.
This fixes an issue where we would search for the hovered diff hunk
based on the mouse hit test computed during (or prior) editor paint
instead of the mouse hit test computed prior to the mouse event
invocation.
That in turn could lead to cases where moving the mouse from the editor
to the project panel and then clicking a file shortly after would expand
a diff hunk when actually nothing should happen in that case.
Release Notes:
- Fixed an issue where diff hunks would sometimes erroneously toggle
upon mouse clicks.
I maintain this repository that contains several developer tools like
- ghostty
- zig
- yazi
all of them are updated usually the same day as upstream.
Release Notes:
- N/A
Closes #ISSUE
it is was still in
[discussion](https://github.com/zed-industries/zed/discussions/37983)
Release Notes:
- Added: `--reuse` (`-r`) CLI flag to replace the workspace in an
existing window instead of opening a new one
This PR adds a new `--reuse` (`-r`) CLI flag that allows users to
replace the workspace in an existing Zed window instead of opening a new
one or adding files to the current workspace.
### What it does
The `--reuse` flag finds an available local workspace window and
replaces its workspace with the newly specified paths. This provides a
third workspace opening mode alongside the existing `--add` and `--new`
flags.
### Implementation Details
- **CLI Flag**: Added `--reuse` (`-r`) flag with proper mutual exclusion
with `--add` and `--new`
- **Window Replacement**: Uses the existing `replace_window` option in
`workspace::OpenOptions`
- **Window Selection**: Reuses the first available local workspace
window
- **Fallback Behavior**: When no existing windows are found, creates a
new window
- **Test Coverage**: Added comprehensive test for the reuse
functionality
### Behavior
- `zed -r file.txt` - Replaces the workspace in an available window with
`file.txt`
- If no windows are open, creates a new window (same as default
behavior)
- Mutually exclusive with `-a/--add` and `-n/--new` flags
- Works with multiple files and directories
### Files Changed
- `crates/cli/src/cli.rs` - Added `reuse` field to `CliRequest::Open`
- `crates/cli/src/main.rs` - Added CLI argument definition and parsing
- `crates/zed/src/zed/open_listener.rs` - Implemented reuse logic and
added tests
- `crates/zed/src/zed/windows_only_instance.rs` - Updated for Windows
compatibility
### Testing
- ✅ Unit tests pass
- ✅ Manual testing confirms expected behavior:
- Works when no windows are open
- Replaces workspace in existing window
- Maintains compatibility with existing `-a` and `-n` flags
- Proper help text display
## Manual testing
#### In this first video we do a couple of tests:
* **1**: What happens if we use the -r flag when there are no windows
open?
- works as expected. It opens the files in a new window.
* **2**: Does it work as expected if there is already a window open.
Does it overrides the workspace?
- yes it does. When opening a different file it overrides the current
window instead of creating a new one.
* **3**: Does the -n flag still works as expected?
- yes, it creates the project in a new window
* **4**: What about the -a flag?
- yes, on the last accessed page
* **5**: we do the replace command. It overrides the first opened
window, do we want this behavior?
- It is good enough that it overrides one of the opened windows with the
new project. It still makes the user automatically go to the window with
the specified files
* **6**: we use the -r command again replacing the workspace with a new
one.
- this indeed worked as expected
https://github.com/user-attachments/assets/f1cd7f4b-f4af-4da2-a755-c0be7ce96c0d
#### In here the we check how the --help flag now displays the new
command. (Description was later updated)
https://github.com/user-attachments/assets/a8a7a288-d926-431b-a9f9-a8c3d909a2ec
Closes#39901
I'm unsure as to which direction the team wants to go with this, but
this is the behavior of VSCode which is what this feature is based off
so i'm going with this.
Changes:
1. Introduced a new argument to the `new` method on the Pane called
`ignore_max_tabs` that forces the `max_tabs` to None if it's true.
2. Added a new test `test_bypass_max_tabs_limit`.
Release Notes:
- Fixed: `max_tabs` Setting affecting the terminal pane.
---------
Co-authored-by: Joseph T. Lyons <JosephTLyons@gmail.com>
This is needed for #38914 and seems generally useful to have for
contextual keybindings.
Release Notes:
- N/A
---------
Co-authored-by: David Kleingeld <davidsk@zed.dev>
Changes that I made:
- add "scrollbar.thumb.active_background" to all themes
- for dark themes: scrollbar.thumb.background is darker than hover (fg4
from palette for background and fg0 for hover)
- for light themes: scrollbar.thumb.background is lighter than hover
(fg4 for background and fg0 for hover like in dark theme case)
Those changes is consistent with VSCode gruvbox theme and other
applications.
For active_background I chose orange color, but we can use cyan color to
match vscode theme.
UPDATE: decided to use blue for active scrollbar as this color is used
as accent in other parts of gruvbox themes
Release Notes:
- Improved scrollbar colors for Gruvbox theme
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
## 🎯 Description
Adds configurable window control buttons (minimize, maximize, close)
positioning for Linux, allowing users to choose between macOS-style
(left side) or Windows-style (right side) placement.
## ✨ Features
- New `title_bar.window_controls_position` setting with `"left"` and
`"right"` options
- Left positioning: macOS style (Close → Minimize → Maximize)
- Right positioning: Windows style (Minimize → Maximize → Close)
- Fixed transparent background issues for window controls
- Maintains consistent styling with Zed's theme
## 🔧 Technical Changes
### Settings System
- Added `WindowControlsPosition` enum in `settings_content.rs`
- Extended `TitleBarSettingsContent` with `window_controls_position`
field
- Updated `TitleBarSettings` to include the new configuration
### Title Bar Layout
- Modified `platform_title_bar.rs` to use setting for layout positioning
- Added conditional logic for `justify_start()` vs `justify_between()`
based on position
- Fixed transparent container background by adding `bg(titlebar_color)`
### Window Controls
- Updated `platform_linux.rs` to reorder buttons based on position
setting
- Changed button background from `ghost_element_background` to
`title_bar_background`
- Implemented proper button sequencing for both positions
## 🧪 How to Test
1. Add to your Zed settings:
```json
{
"title_bar": {
"window_controls_position": "left"
}
}
```
or
```json
{
"title_bar": {
"window_controls_position": "right"
}
}
```
2. Restart Zed
3. Verify buttons are positioned correctly
4. Check that background is not transparent
5. Test button functionality (minimize, maximize, close)
## �� Expected Behavior
- **Left position**: Buttons appear on the left side of the title bar in
Close → Minimize → Maximize order
- **Right position**: Buttons appear on the right side of the title bar
in Minimize → Maximize → Close order
- **Background**: Solid background matching Zed's theme (no
transparency)
## 🔍 Files Changed
- `crates/settings/src/settings_content.rs` - Added enum and setting
- `crates/title_bar/src/title_bar_settings.rs` - Updated settings struct
- `crates/title_bar/src/platform_title_bar.rs` - Modified layout logic
- `crates/title_bar/src/platforms/platform_linux.rs` - Updated button
ordering and styling
## 🎨 Design Rationale
This feature provides Linux users with the flexibility to choose their
preferred window control button layout, improving the user experience by
allowing them to match their desktop environment's conventions or
personal preferences.
## ✅ Checklist
- [x] Code compiles without errors
- [x] Settings are properly serialized/deserialized
- [x] Background transparency issues resolved
- [x] Button ordering works correctly for both positions
- [x] Layout adapts properly based on configuration
- [x] No breaking changes to existing functionality
## 🔗 Related
This addresses the need for customizable window control positioning on
Linux, providing consistency with user expectations from different
desktop environments.
Closes#40608
This fixes tabbing in both the settings ui nav bar and page content
going off screen instead of scrolling the focused element into a visible
view.
The bug occurred because `gpui::list` and `gpui::uniform_list` only
render visible elements, preventing non visible elements in a view from
having their focus handle added to the element tree. Thus making the tab
stop map skip over those elements because they weren't present.
The fix for this is scrolling to reveal non visible elements and then
focus the selected element on the next frame.
Release Notes:
- settings ui: Auto scroll to reveal items in navigation bar and window
when tabbing
---------
Co-authored-by: Ben Kunkle <ben@zed.dev>
A cherry-pick of
f5188d55fb
This fixes a hard-to-reproduce crash caused excerpts removal not
updating previous snapshot data after corresponding inlay data was
removed.
Same branch has a test:
8783a9eb4f
that does not fail on `main` due to different way inlays are queried, it
will be merged later.
Release Notes:
- N/A
Closes#5294
This PR adds a line ending indicator to the status bar, hidden by
default as discussed in
https://github.com/zed-industries/zed/issues/5294.
### Changes
- 8b063a22d8700bed9c93989b9e0f6a064b2e86cf add the indicator and
`status_bar.line_endings_button` setting.
- ~~9926237b709dd4e25ce58d558fd385d63b405f3b changes
`status_bar.line_endings_button` from a boolean to an enum:~~
<details> <summary> show details </summary>
- `always` Always show line endings indicator.
- `non_native` Indicate when line endings do not match the current
platform.
- `lf_only` Indicate when using unix-style (LF) line endings only.
- `crlf_only` Indicate when using windows-style (CRLF) line endings
only.
- `never` Do not show line endings indicator.
I know this many options might be overdoing it, but I was torn between
the pleasant default of `non_native` and the simplicity of `lf_only` /
`crlf_only`.
My thinking was if one is developing on a project which exclusively uses
one line-ending style or the other, it would be nice to be able to
configure no-indicator-in-the-happy-case behavior regardless of the
platform zed is running on. But I'm not really familiar with any
projects that use exclusively CRLF line endings in practice. Is this a
scenario worth supporting or just something I dreamed up?
</details>
- 01174191e4cf337069e7a31b0f0432ae94c52515 rename the action context for
`line ending: Toggle` -> `line ending selector: Toggle`.
When running the action in the command palette with the old name I felt
surprised to be greeted with an additional menu, with the new name it
feels more predictable (plus now it matches
`language_selector::Toggle`!)
### Future work
Hidden status bar items still get padding, creating inconsistent spacing
(and it kind of stands out where I placed the line-endings button):
<img alt="the gap after the indicator is larger than for other buttons"
src="https://github.com/user-attachments/assets/24a346d4-3ff6-4f7f-bd87-64d453c2441a"
/>
I started a new follow-up PR to address that:
https://github.com/zed-industries/zed/pull/39992
Release Notes:
- Added line ending indicator to the status bar (disabled by default;
enabled by setting `status_bar.line_endings_button` to `true`)
We very frequently move this in and out of the windows slot map on
`update_window_id` calls (and we call this a lot!). This alone showed up
as `memmove`s at roughly 1% perf in Instruments when scrolling a buffer
which makes sense, `Window` itself is 4kb in size. The fix is simple,
just box the `Window` instances, moving a pointer is cheap in
comparison.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
I noticed that branch picker doesn't close until the checkout operation
is completed.
While normally it's not an issue, it becomes obvious if there are longer
running post checkout hooks. In that case selecting a branch makes it
feel like nothing has happened (there's a small indicator in the footer)
so it's possible to click it multiple times. Closing the modal before
the operation completes leads to the error modal saying `Failed to
change branch. entity released. Please try again.` even though the
checkout was successful.
The new behavior is to close the branch picker as soon as the branch is
selected. This also aligns with the existing behavior in `create_branch`
where `cx.emit(DismissEvent);` is called without waiting for
`repo.update`.
And as I mentioned before there an indicator in the footer saying `git
switch <branch_name>` with a spinner thingy.
I also added a check in the picker's `open` function where it first
checks if there's currently an active job and does not show the picker
in that case.
If this generally makes sense I can add the tests as well if needed.
P.S I checked how it works in VSCode and yes it also closes the branch
picker as soon as the branch is selected. The only difference is that
they show the loading indicator right next to the branch name (with a
new branch) but in our case the current branch and activity indicator
are located in different places.
<details><summary>Before</summary>
https://github.com/user-attachments/assets/adf08967-d908-45fa-b3f6-96f73d321262
</details>
<details><summary>After</summary>
https://github.com/user-attachments/assets/88c7ca41-7b39-42d6-a98b-3ad19da9317c
</details>
Release Notes:
- The branch picker now closes immediately after a branch is selected,
instead of waiting for the branch switch to complete.
Closes#39865
Release Notes:
- Fixed file finder display when searching for files in history if you
had several worktrees opened in a workspace. It now displays the
worktree root name to avoid confusion if you have several files with
same name in different worktrees.
---------
Signed-off-by: Benjamin <5719034+bnjjj@users.noreply.github.com>
Closes #ISSUE
Adds a `Maybe<T>` type to `settings_content`, that makes the distinction
between `null` and omitted settings values explicit. This unlocks a few
more settings in the settings UI
Release Notes:
- N/A *or* Added/Fixed/Improved ...
We were dropping the entities once we created the buffers, so the weak
entities could never be upgraded. This treats new locations we see the
same as we would for a read/write call and stores the entity so that we
can follow like we normally would.
Release Notes:
- acp: Fix following not working with certain tool calls.
I love keybindings.
I spend way to much time thinking about them.
I also REALLY like working in Zed.
so far, however, I have found the key context system in Zed to be less
flexible than in VSCode.
the HUGE context that is available in VSCode helps you create
keybindings for very specific targeted scenarios.
the tree like structure of the Zed key context means you loose some
information as focus moves throughout the application.
For example, it is not currently possible to create a keybinding in the
editor that will only work when one of the Docks is open, or if a
specific dock is open.
this would be useful in implementing solutions to ideas like #24222
we already have an action for moving focus to the dock, and we have an
action for opening/closing the dock, but to my knowledge (very limited
lol) we cannot determine if that dock *is open* unless we are focused on
it.
I think it is possible to create a more flexible key binding system by
adding more context information to the higher up context ancestors.
while:
```
Workspace right_dock=GitPanel
Dock
GitPanel
Editor
```
may seem redundant, it actually communicates fundamentally different
information than:
```
Workspace right_dock=GitPanel
Pane
Editor
```
the first says "the GitPanel is in the right hand dock AND IT IS
FOCUSED",
while the second means "Focus is on the Editor, and the GitPanel just
happens to be open in the right hand dock"
This change adds a new set of identifiers to the `Workspace` key_context
that will indicate which docks are open and what is the specific panel
that is currently visible in that dock.
examples:
- `left_dock=ProjectPanel`
- `bottom_dock=TerminalPanel`
- `right_dock=GitPanel`
in my testing the following types of keybindings seem to be supported
with this change:
```jsonc
// match for any value of the identifier
"context": "Workspace && bottom_dock"
"context": "Workspace && !bottom_dock"
// match only a specific value to an identifier
"context": "Workspace && bottom_dock=TerminalPanel"
// match only in a child context if the ancestor workspace has the correct identifier
"context": "Workspace && !bottom_dock=DebugPanel > Editor"
```
some screen shots of the context matching in different circumstances:
<img width="2032" height="1167" alt="Screenshot 2025-10-16 at 23 20 34"
src="https://github.com/user-attachments/assets/116d0575-a1ae-4577-95b9-8415cda57e52"
/>
<img width="2032" height="1167" alt="Screenshot 2025-10-16 at 23 20 57"
src="https://github.com/user-attachments/assets/000fdbb6-80bd-46e9-b668-f4b54ab708d2"
/>
<img width="2032" height="1167" alt="Screenshot 2025-10-16 at 23 21 37"
src="https://github.com/user-attachments/assets/7b1c82da-b82f-4e14-a97c-3cd0e71bbca0"
/>
<img width="2032" height="1167" alt="Screenshot 2025-10-16 at 23 21 52"
src="https://github.com/user-attachments/assets/1fd4b65a-09f7-47a9-a9b7-fdce4252aec3"
/>
<img width="2032" height="1167" alt="Screenshot 2025-10-16 at 23 22 38"
src="https://github.com/user-attachments/assets/f4c2ac5c-e6f9-4e0e-b683-522b237e3328"
/>
the persistent_name values for `ProjectPanel` and `OutlinePanel` needed
to be updated to not have a space in them in order to pass the
`Identifier` check. all the other Panels already had names that did not
include spaces, so it just makes these conform with the other ones.
I think this is a great place to start with adding more context
identifiers and i think this type of additional information will make it
possible to create really dynamic keybindings!
Release Notes:
- Workspace key context now includes the state of the 3 docks
Reduces peak stack usage in these functions and should generally be a
bit performant.
Display map benchmark results
```
To tab point/to_tab_point/1024
time: [531.40 ns 532.10 ns 532.97 ns]
change: [-2.1824% -2.0054% -1.8125%] (p = 0.00 < 0.05)
Performance has improved.
Found 1 outliers among 100 measurements (1.00%)
1 (1.00%) high severe
To fold point/to_fold_point/1024
time: [530.81 ns 531.30 ns 531.80 ns]
change: [-2.0295% -1.9054% -1.7716%] (p = 0.00 < 0.05)
Performance has improved.
Found 3 outliers among 100 measurements (3.00%)
2 (2.00%) high mild
1 (1.00%) high severe
```
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Continues the work from #35927 to add a git diff view for stash entries.
[Screencast From 2025-09-17
19-46-01.webm](https://github.com/user-attachments/assets/ded33782-adef-4696-8e34-3665911c09c7)
Stash entries are [represented as
commits](https://git-scm.com/docs/git-stash#_discussion) except they
have up to 3 parents:
```
.----W (this is the stash entry)
/ /|
-----H----I |
\|
U
```
Where `H` is the `HEAD` commit, `I` is a commit that records the state
of the index, and `U` is another commit that records untracked files
(when using `git stash -u`).
Given this, I modified the existing commit view struct to allow loading
stash and commits entries with git sha identifier so that we can get a
similar git diff view for both of them.
The stash diff is generated by comparing the stash commit with its
parent (`<commit>^` or `H` in the diagram) which generates the same diff
as doing `git stash show -p <stash entry>`. This *can* be
counter-intuitive since a user may expect the comparison to be made
between the stash commit and the current commit (`HEAD`), but given that
the default behavior in git cli is to compare with the stash parent, I
went for that approach.
Hoping to get some feedback from a Zed team member to see if they agree
with this approach.
Release Notes:
- Add git diff view for stash entries
- Add toolbar on git diff view for stash entries
- Prompt before executing a destructive stash action on diff view
- Fix commit view for merge commits (see #38289)
Add new `workspace::NewFileSplit` action which expects a
`SplitDirection` argument, allowing users to programmatically control
the direction of the split in keymaps, for example:
```json
{
"context": "Editor",
"bindings": {
"ctrl-s ctrl-h": ["workspace::NewFileSplit", "left"],
"ctrl-s ctrl-j": ["workspace::NewFileSplit", "down"],
"ctrl-s ctrl-k": ["workspace::NewFileSplit", "up"],
"ctrl-s ctrl-l": ["workspace::NewFileSplit", "right"]
}
}
```
Release Notes:
- Added `workspace::NewFileSplit` action, which can be used to
programmatically split the editor in the provided direction.
Co-authored-by: Rian Drake <rian.drake@rocketwerkz.com>
Co-authored-by: dino <dinojoaocosta@gmail.com>
This is an in-progress work on changing how task scheduler affects
performance of project search. Instead of relying on tasks being
executed at a discretion of the task scheduler, we want to experiment
with having a set of "agents" that prioritize driving in-progress
project search matches to completion over pushing the whole thing to
completion. This should hopefully significantly improve throughput &
latency of project search.
Release Notes:
- Improved project search performance
---------
Co-authored-by: Smit Barmase <smit@zed.dev>
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
Release Notes:
- Added comment language injections for builtin languages. This enables
highlighting of `TODO`s and similar notes with the comment extension
installed.
Signed-off-by: Donnie Adams <donnie@thedadams.com>
Related to #9461, inspired by #39683
`await` and `yield` both seem somewhat debatable on whether they should
be considered the be control flow keywords.
For now I went with:
- `await`: no – The control flow effect of `await` is at a level does
not seem relevant for syntax highlighting.
- `yield`: yes – `yield` directly affects the output of a generator, and
is also included for consistency with Rust (#39683).
Happy to change these either direction.
<img width="1151" height="730" alt="SCR-20251008-izus"
src="https://github.com/user-attachments/assets/533ea670-863a-4c5c-aaa5-4a9bfa0bf0dd"
/>
---
Release Notes:
- Improved granularity of keyword highlighting for JS/TS/TSX: Themes can
now specify `keyword.control` for control flow keywords like `if`,
`else`, `return`, etc.
Adding this content after seeing people ask about how to make MCP
servers installed from Zed be picked up by external agents. At the
moment, this varies depending on the agent, and felt relevant to be
documented.
Release Notes:
- N/A
- Notable change is the use of a newtype for `ReplicaId`
- Fixes `WorktreeStore::create_remote_worktree` creating a remote
worktree with the local replica id, though this is not currently used
- Fixes observing the `Agent` (that is following the agent) causing
global clocks to allocate 65535 elements
- Shrinks the size of `Global` a bit. In a local or non-collab remote
session it won't ever allocate still.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Let's say you run this:
```
cd ~/proj-a
zed ~/proj-b
```
The `zed` process will execute with `current_dir() = ~/proj-a`, but a
`worktree_root_path() = ~/proj-b`. The old detection was then checking
if the Yarn SDK was installed in `proj-a` to decide whether to set the
tsdk value or not. This was incorrect, as we should instead check for
the SDK presence inside `proj-b`.
Release Notes:
- Fixed the Yarn SDK detection when the Zed pwd is different from the
opened folder.
The page about PHP in the docs doesn’t explain how to use Xdebug. I had
a lof of trouble setting it up the first time, then recently had another
headache trying to get it to work again, because the value for `adapter`
had changed from `PHP` to `Xdebug`.
It’s likely that my example config isn’t perfect or has redundant stuff
or whatever, feel free to amend it.
I also took the liberty to set the Phpactor and Intelephense headings to
level 3 because I felt like they were part of "Choosing a language
server."
Release Notes:
- N/A
# Why
While working on recent PR I have spotted that "Stage" and "Unstage"
buttons in "Uncommited Changes" toolbar are always active, even when
there is no changes made locally.
<img width="1628" height="656" alt="Screenshot 2025-10-10 at 00 49 06"
src="https://github.com/user-attachments/assets/6bdb9ded-17c8-4f84-8649-b297162c1992"
/>
# How
Re-use already existing button states for managing the disabled state of
"Uncommited Changes" toolbar buttons when changeset is empty.
Release Notes:
- Added disabled state for "Uncommited Changes" toolbar buttons when
there are no changes present
# Preview
<img width="1728" height="772" alt="Screenshot 2025-10-10 at 08 40 14"
src="https://github.com/user-attachments/assets/ff41d852-974e-4ce1-9163-ecd30e17d5d8"
/>
Closes#37322
Uses SFTP if available, otherwise falls back to SCP for uploading files
and directories to remote. This fixes an issue on older macOS versions
where outdated SCP can throw an ambiguous target error.
Release Notes:
- Fixed an issue where extensions wouldn’t work when SSHing into a
remote from older macOS versions.
Though we ship with `basedpyright`, `ruff` and a few other laps for
python, we run them all at once.
Release Notes:
- Only enable `basedpyright` and `ruff` by default when opening Python
files. If you prefer one of the other.
Refactor the find_tab_group method to use the question mark operator for
cleaner error handling, replacing the explicit if-else pattern with a
more concise chained approach.
Release Notes:
- N/A
Signed-off-by: Xiaobo Liu <cppcoffee@gmail.com>
### Problem
On Windows, the right Alt key was not working in keybindings (e.g.,
`Ctrl+Right Alt+B`), while the left Alt key worked correctly. This was
due to overly aggressive AltGr detection that treated any `right Alt +
left Ctrl` combination as AltGr, even on US keyboards where AltGr
doesn't exist.
### Root Cause
Windows internally represents AltGr (Alt Graph) as `right Alt + left
Ctrl` pressed simultaneously. The previous implementation always
excluded this combination from being treated as regular modifier keys to
support international keyboards. However, this broke keybindings using
right Alt on US/UK keyboards where users expect right Alt to behave
identically to left Alt.
### Solution
Implemented keyboard layout-aware AltGr detection:
1. Added `uses_altgr()` method to `WindowsKeyboardLayout` that checks if
the current keyboard layout is known to use AltGr (German, French,
Spanish, Polish, etc.)
2. Modified `current_modifiers()` to only apply AltGr special handling
when the keyboard layout actually uses it
3. Added explicit checking for both `VK_LMENU` and `VK_RMENU` instead of
relying solely on the generic `VK_MENU`
### Behavior
- **US/UK keyboards**: Right Alt now works identically to left Alt in
keybindings. `Ctrl+Right Alt+B` triggers the same action as `Ctrl+Left
Alt+B`
- **International keyboards** (German, French, Spanish, etc.): AltGr
continues to work correctly for typing special characters and doesn't
trigger keybindings
- **All keyboards**: Both Alt keys are detected symmetrically, matching
the behavior of left/right Windows keys
### Testing
Manually tested on Windows with US keyboard layout:
- `Ctrl+Left Alt+B` triggers keybinding
- `Ctrl+Right Alt+B` triggers keybinding
- Both Alt keys work independently in keybindings
Release Notes:
- Fixed Right Alt key not working in keybindings on Windows
Release Notes:
- Fixed misplaced comma in the autoclose description from:
"when you type (, Zed will ...)"
to
"when you type, (Zed will ...)"
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
`env_logger` defaults to only showing error-level logs, but we show
info-level logs and above for the main Zed process, so I think it makes
sense for the remote server to behave the same way.
Release Notes:
- N/A
Re-applies https://github.com/zed-industries/zed/pull/30840
This PR re-applies the initial
[PR](https://github.com/zed-industries/zed/pull/30840). As it was closed
because it was hard to land, because of the many conflicts. This PR
re-applies the changes for it.
In several cases we were creating multiple display_map
snapshots within the same root-level function call.
Creating a display_map snapshot is quite slow, and in some
cases we were creating the snapshot multiple times.
Release Notes:
- N/A
We've been considering removing workspace-hack for a couple reasons:
- Lukas ran into a situation where its build script seemed to be causing
spurious rebuilds. This seems more likely to be a cargo bug than an
issue with workspace-hack itself (given that it has an empty build
script), but we don't necessarily want to take the time to hunt that
down right now.
- Marshall mentioned hakari interacts poorly with automated crate
updates (in our case provided by rennovate) because you'd need to have
`cargo hakari generate && cargo hakari manage-deps` after their changes
and we prefer to not have actions that make commits.
Currently removing workspace-hack causes our workspace to grow from
~1700 to ~2000 crates being built (depending on platform), which is
mainly a problem when you're building the whole workspace or running
tests across the the normal and remote binaries (which is where
feature-unification nets us the most sharing). It doesn't impact
incremental times noticeably when you're just iterating on `-p zed`, and
we'll hopefully get these savings back in the future when
rust-lang/cargo#14774 (which re-implements the functionality of hakari)
is finished.
Release Notes:
- N/A
A small follow-up to the settings refactor of a few weeks ago to move
all the VSCode settings imports
to one place.
This should make it easier to spot missing imports, and easier to test
the importer.
Release Notes:
- N/A
It is now possible to configure logging level of CodeLLDB adapter via
envs specified in project settings like so:
```
{
"dap": {
"CodeLLDB": {
"envs": {
"RUST_LOG": "debug"
}
}
}
}
```
Release Notes:
- N/A
`MultiBuffer::anchor_in_excerpt` currently just wraps the given text
anchor in a multibuffer anchor. This allows one to get a multibuffer
anchor that points outside its excerpt which is basically never what one
wants. This PR now does a bounds check and returns `None` if the given
text anchor is not within the bounds of the excerpt.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Closes #ISSUE
Includes the start of how we can get rid of most of the `.unimplemented`
"Edit in JSON" buttons in the settings UI. For now only Theme selection
is implemented, follow ups will add more settings
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Fixes#40034
Release Notes:
- `ctrl-c` (when you have a selection) and `ctrl-v` are now bound to
copy and paste by default in the windows terminal.
Co-authored-by: John Tur <john-tur@outlook.com>
Close#35715
Release Notes:
- Fixed to wrap long URLs in editor.
<img width="836" height="740" alt="image"
src="https://github.com/user-attachments/assets/635ce792-5f19-4c76-b131-0d270d09b103"
/>
I remember when I was working on CJK line wrapping support in the early
days, I considered making `\` a line wrapping character, but for some
reason it was on the list of characters that were not allowed to wrap.
In reference to VS Code, it looks like `&`, `/`, `?` should wrap, so I
removed all of them.
---------
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
This is a follow-up PR to
https://github.com/zed-industries/zed/pull/39609, and attempts to
address hidden status bar items still contributing to the layout and
creating extra spacing.
- 203cbd634bfb1489b8afa4952d9594615a956b77 Adds a `.none()` method to
the `gpui::Styled` helper trait, so that status items can set their
display type to none inside their `render` method.
- 249f06e3de63b0ab32814f20e7105d8e2b642f02 Applies `.none()` to all the
status items.
- ~~499f564906c88336608c81615b11ebc9ab43d832~~ At first I was adding an
`is_visible` method to the `StatusBarView` trait, which would be used to
skip status bar items which would just render an empty div anyway, but I
felt duplicating the conditions for hiding the buttons between the
status items `is_visible` and `render` methods could be an attraction
for bugs, so I tried to find another approach. This commit contains
those changes, reverted immediately (if the `is_visible` approach is
preferred I can bring it back!)
- f37cb75f0519ceea1f3e1cc4f97087a5cb34b0fd (bonus!) Adds a condition to
the vim mode indicator to avoid a leading space when there are no
pending keys.
Release Notes:
- N/A
Hello,
Thanks for the great work.
I am adding some more bindings for the emacs keymap:
- `command_palette::Toggle` as replacement for the emacs command
dispatcher
- other default aliases for existing move / delete commands
- e.g. `alt-left` to move to previous word and `alt-del` to delete it
- some missing `SelectTo` equivalents for move commands on selection
mode
Release Notes:
- Added bindings for the Emacs keymap
The built-in Tailwind language already maps `HTML+ERB` to `erb`, and it
seems that `Ruby` files work as well just from enabling the language
server, so we can remove the unnecessary mapping.
Release Notes:
- N/A
Follow-up after #40417, which should've fixed hangs.
smol::fs uses a separate threadpool, which is a bit yuck.
This PR also added a benchmark you can use to run a full worktree scan
(initial one, that is) for arbitrary worktree.. and refactored worktree
scanner to use async locks, as otherwise tests were deadlocking. :)
I've benchmarked it against Zed, Linux and Chromium and saw a ~60% drop
in initial worktree scan times across the board.
Release Notes:
- Significantly (3.3x speedup over the old implementation) improved
speed of Zed's worktree scanner, that's responsible for synchronizing
the state of your project with the state of files on hard drive.
---------
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
Using a seeded PRNG to produce consistent test data and reduce
variability makes sense.
However, the way it was used previously, by always cloning the RNG,
means that every generated string is the same, and every offset is the
same. After this change, the tested value stream should still be the same on
each run of the benchmark, but the values within each run will vary.
The `generate_random_text` measured in chars also seems possibly
inconsistent with later comments about it being a number of bytes.
Release Notes:
- N/A
This caused issues with #40172, as it made Zed execute and block on tad
few more background tasks. Parker is ~cheap to create, hence we should
be ok to just create it at the time it is needed.
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Closes#40359
We were segfaulting when opening a UTF-8 file starting with a byte order
mark due to a mismatch in our UTF-16 indexing calculations caused by
Core Foundations `replace_str` stripping the BOM internally. This PR
fixes the crash by replacing one of our manual calculations by calling
the Core Foundations API to get the length of a string.
Release Notes:
- Fixed a crash on macOS when opening a file that starts with a UTF-8
byte order mark (BOM).
Co-authored-by: HactarCE <6060305+HactarCE@users.noreply.github.com>
# Why
While playing with new Settings UI I have spotted that changing font
weight requires a lot of clicks. This is also a bit more annoying due to
lack of ability to enter the desired value by hand.
# How
Adjust step values for Font Weight stepper, the default increment has
been changed from 10 to 50, to cover (defined in spec `950` weight)
which some fonts might use, small step has been changed from 5 to 10,
and large step from 50 to 100.
Release Notes:
- Adjusted default step values for number input UI element used for
changing Font Weight in Settings UI.
Closes#40334
This reverts the change made in #39983, and includes a replacement
migration that will transform formatter settings values consisting of
only `code_action` format steps into the previously deprecated
`code_actions_on_format` in an attempt to restore the behavior to what
it was before the migration that deprecated `code_actions_on_format`.
This PR will result in a modified order in the `code_actions_on_format`
setting if it existed, however the decision was made to explicitly
ignore this for now, as this PR is primarily targeting users who have
already had the deprecation migration run, and no longer have the
`code_actions_on_format` key
Release Notes:
- Fixed an issue with a settings migration that deprecated the
`code_actions_on_format` setting. The `code_actions_on_format` setting
has been un-deprecated, and affected users will have the bad migration
rolled back with an updated migration
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
Co-authored-by: HactarCE <6060305+HactarCE@users.noreply.github.com>
`vim::Substitute` is a little different from the helix behavior, so this
PR adds helix versions. The most important difference (for my usage, at
least) is that if you're selecting whole lines then helix drops the `\n`
from the selection (much like vim's lines mode, except that helix bases
this behavior on the selection instead of having a different mode).
Release Notes:
- N/A
Closes#33637Closes#37332
and solves part of
https://github.com/zed-industries/zed/discussions/33580#discussioncomment-14195506
This improves the "C" and "alt-C" actions to work like helix.
It also adds "," which removes all but the newest cursors. In helix the
one that's left would be the primary selection, but I don't think that
has an equivalent yet, so this simulates what would be the primary
selection if it was never cycled with "(" ")".
Release Notes:
- Improved multicursor creation and deletion in helix mode
---------
Co-authored-by: Jakub Konka <kubkon@jakubkonka.com>
Instead of producing multiple code blocks for each edit history event,
we now produce a continuous unified diff.
Release Notes:
- N/A
---------
Co-authored-by: Oleksiy Syvokon <oleksiy.syvokon@gmail.com>
Update the keybindings used in the default keymaps to better align with
VSCode's defaults, with the following changes:
* Windows & Linux
* `ctrl-enter` has been replaced by `ctrl-i` for
`assistant::InlineAssist`
* `ctrl-shift-space` maps to `editor::ShowSignatureHelp` instead of
`editor::ShowWordCompletions`
* MacOS
* `ctrl-enter` has been replaced by `cmd-i` for
`assistant::InlineAssist`
* `cmd-i` has been replaced by `cmd-shift-space` for
`editor::ShowSignatureHelp`
Closes#39278
Release Notes:
- Changed the keybinding for `assistant: inline assist` from
`ctrl-enter` to `ctrl-i` for both Linux and Windows, and `cmd-i` for
MacOS. If you'd like to restore the old behavior, update your keymap
file with:
```
{
"context": "!ContextEditor > Editor && mode == full",
"bindings": {
"ctrl-enter": "assistant::InlineAssist"
}
}
```
- Changed the action dispatched by `ctrl-shift-space` from
`editor::ShowWordCompletions` to `editor::ShowSignatureHelp` on both
Linux and Windows. If you'd like to restore the old behavior, update
your keymap file with:
``` {
"context": "Editor",
"bindings": {
"ctrl-shift-space": "editor::ShowWordCompletions"
}
}
```
- Changed the keybinding for `editor: show signature help` on MacOS from
`cmd-i` to `cmd-shift-space`. If you'd like to restore the old behavior,
update your keymap file with:
``` {
"context": "Editor",
"bindings": {
"cmd-i": "editor::ShowSignatureHelp"
}
}
```
---------
Co-authored-by: Agus Zubiaga <agus@zed.dev>
Closes#39786
Release Notes:
- Fixed: Settings popup no longer keeps the process alive when closing
Zed on Windows
---------
Co-authored-by: Anthony <anthony@zed.dev>
Co-authored-by: Joseph T. Lyons <JosephTLyons@gmail.com>
# Arrays are merged together though. See: https://doc.rust-lang.org/cargo/reference/config.html#hierarchical-structure
# The intent for this file is to configure CI build process with a divergance from Zed developers experience; for example, in this config file
# we use `-D warnings` for rustflags (which makes compilation fail in presence of warnings during build process). Placing that in developers `config.toml`
# would be incovenient.
# would be inconvenient.
# The reason for not using the RUSTFLAGS environment variable is that doing so would override all the settings in the config.toml file, even if the contents of the latter are completely nonsensical. See: https://github.com/rust-lang/cargo/issues/5376
# Here, we opted to use `[target.'cfg(all())']` instead of `[build]` because `[target.'**']` is guaranteed to be cumulative.
[target.'cfg(all())']
rustflags=["-D","warnings"]
# We don't need fullest debug information for dev stuff (tests etc.) in CI.
[profile.dev]
debug="limited"
# Use Mold on Linux, because it's faster than GNU ld and LLD.
#
# We no longer set this in the default `config.toml` so that developers can opt in to Wild, which
filter='package(worktree) and test(test_random_worktree_changes)'
priority=100
[[profile.default.overrides]]
filter='package(collab) and (test(random_project_collaboration_tests) or test(random_channel_buffer_tests) or test(test_contact_requests) or test(test_basic_following))'
priority=99
[[profile.default.overrides]]
filter='package(extension_host) and test(test_extension_store_with_test_extension)'
@@ -9,11 +9,10 @@ Welcome to Zed, a high-performance, multiplayer code editor from the creators of
### Installation
On macOS and Linux you can [download Zed directly](https://zed.dev/download) or [install Zed via your local package manager](https://zed.dev/docs/linux#installing-via-a-package-manager).
On macOS, Linux, and Windows you can [download Zed directly](https://zed.dev/download) or [install Zed via your local package manager](https://zed.dev/docs/linux#installing-via-a-package-manager).
Other platforms are not yet available:
- Windows ([tracking issue](https://github.com/zed-industries/zed/issues/5394))
- Web ([tracking issue](https://github.com/zed-industries/zed/issues/5396))
# Suppresses clippy::mutable_key_type, which is a false positive as the Eq
# and Hash impls do not use fields with interior mutability.
"agent::context::AgentContextKey"
"agent_ui::context::AgentContextKey"
]
disallowed-methods=[
{path="std::process::Command::spawn",reason="Spawning `std::process::Command` can block the current thread for an unknown duration",replacement="smol::process::Command::spawn"},
/// Reads the content of the given file in the project.
///
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
