Given agent servers will soon be a thing, I'm adding Claude Code, Gemini
CLI, and Codex CLI as included agents in case anyone comes first to
search them as extensions before looking up on the agent panel.
Release Notes:
- N/A
Closes#17524
This PR adds a button to the bottom right corner of the ollama settings
ui. It resets the available ollama models, also resets the "Connected"
state in the process. This means it can be used to check if the
connection is still valid as well. It's a question whether we should
clear the available models on ALL `fetch_models` calls, since these only
happen during auth anyway.
Ollama is a local model provider which means clicking the refresh button
often only flashes the "not connected" state because the latency of the
request is so low. This accentuates changes in the UI, however I don't
think there's a way around this without adding some rather cumbersome
deferred ui updates.
I've attached the refresh button to the "Connected" `ButtonLike`, since
I don't think automatic UI spacing should separate these elements. I
think this is okay because the "Connected" isn't actually something that
the user can interact with.
Before:
<img width="211" height="245" alt="image"
src="https://github.com/user-attachments/assets/ea90e24a-b603-4ee2-9212-2917e1695774"
/>
After:
<img width="211" height="250" alt="image"
src="https://github.com/user-attachments/assets/be9af950-86a2-4067-87a0-52034a80a823"
/>
Alternative approach: There was also a suggestion to simply add a entry
to the command palette, however none of the other providers have this
ability currently either so I went with this approach. The current
approach also makes it more discoverable to the user.
Release Notes:
- Added a button for refreshing available ollama models
---------
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
Closes#41478
Release Notes:
- Fixed#41478
<img width="459" height="916" alt="Screenshot 2025-10-29 at 1 31 26 PM"
src="https://github.com/user-attachments/assets/1d5b9fdf-9800-44e4-bdd5-f0964f93625f"
/>
> caused by using haiku 4.5 from the anthropic provider and then
swapping to sonnet 3.7 through zed, doing this does mess with prompt
caching but a model swap already invalidates that so it shouldn't have
any cost impact on end users
Update the behavior of the `zed_actions::agent::AddSelectionToThread`
action so that, after the selecitons are added to the current thread,
the editor automatically scrolls to the cursor's position, fixing an
issue where the inserted selection's UI component could wrap the cursor
to the next line below, leaving it outside the viewable area.
Closes#39694
Release Notes:
- Improved the `agent: add selection to thread` action so as to
automatically scroll to the cursor's position after selections are
inserted
Update `Vim::activate` to ensure that the `Vim.focused` method is only
called if the associated editor is also focused.
This ensures that the `VimEvent::Focused` event is only emitted when the
editor is actually focused, preventing a bug where, after starting Zed,
Vim's mode indicator would show that the mode was `Insert` even though
it was in `Normal` mode in the main editor.
Closes#41353
Release Notes:
- Fixed vim's mode being shown as `Inserted` right after opening Zed
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
When rerunning a task, our process id fetching seems to sometimes return
the previous terminal's process id when respawning the task, causing us
to kill the new terminal once the previous one drops as we spawn a new
one, then drop the old one. This results in rerun sometimes spawning a
blank task as the terminal immediately exits. The fix here is simple, we
actually want to kill the process running inside the terminal process,
not the terminal process itself when we exit in the terminal.
No relnotes as this was introduced yesterday in
https://github.com/zed-industries/zed/pull/41562
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Closes#41125
Release Notes:
- Fixed `SwitchToHelixNormalMode` to keep selection
- Added default keybinds for `SwitchToHelixNormalMode` when in Helix
mode
- Update `vim::normal::Vim.normal_replace` to work with more than one
character
- Add `vim::replace::Vim.paste_replace` to handle pasting the
clipboard's contents while in replace mode
- Update vim's handling of the `editor::actions::Paste` action so that
the `paste_replace` method is called when vim is in replace mode,
otherwise it'll just call the regular `editor::Editor.paste` method
Closes#41378
Release Notes:
- Improved pasting while in Vim's Replace mode, ensuring that the Zed
replaces the same number of characters as the length of the contents
being pasted
This PR fixes breakpoint icon alignment to also be at the end of a
rendered entry and enables editing breakpoint qualities when there's no
active session.
The alignment issue was caused by some icons being invisible, so the
layout phase always accounted for the space they would take up. Only
laying out the icons when they are visible fixed the issue.
#### Before
<img width="1014" height="316" alt="image"
src="https://github.com/user-attachments/assets/9a9ced06-e219-4d9d-8793-6bdfdaca48e8"
/>
#### After
[
<img width="502" height="167" alt="Screenshot 2025-10-30 at 3 21 17 PM"
src="https://github.com/user-attachments/assets/23744868-e354-461c-a940-9b6812e1bcf4"
/>
](url)
Release Notes:
- Breakpoint list: Allow adding conditions, logs, and hit conditions to
breakpoints when there's no active session
Closes#40360
This PR added heuristics to determine what variable/breakpoint list
entry has the longest width when rendered. I added this in so the
uniform list would correctly determine which item has the longest width
and use that to calculate the scrollbar size.
The heuristic can be off if a non-mono space font is used in the UI; in
most cases, it's more than accurate enough though.
Release Notes:
- debugger: Add horizontal scroll bars to variable list, memory view,
and breakpoint list
---------
Co-authored-by: MrSubidubi <dev@bahn.sh>
When doing a project wide search in zed on windows for `hang`, zed
starts to freeze for a couple seconds ultimately starting to error with
`Not enough quota is available to process this command.` when
dispatching windows messages. The cause for this is that we simply
overload the windows message pump due to the sheer amount of foreground
tasks we spawn when we populate the project search.
This PR is an attempt at reducing this.
Release Notes:
- Reduced hangs and stutters in large project file searches
This ensures the thread summary is treated as a tracked mention with
accessible context.
Changes:
- Fixed `MessageEditor::insert_thread_summary()` to use proper mention
URI format
- Added test coverage to verify the fix
Release Notes:
- Fixed an issue where "New From Summary" was not properly inserting
thread summaries as contextual mentions when creating new threads.
Thread summaries are now inserted as proper mention URIs.
Attempt 2 for https://github.com/zed-industries/zed/pull/40774
We were spawning the process on the foreground thread before which can
block an arbitrary amount of time. Likewise we no longer block
deserialization on the terminal loading.
Release Notes:
- Improved startup time on systems with slow process spawning
capabilities
Adds an action to open the notes for the currently selected channel in
the collab panel, which is mapped to `alt-enter` in all platforms.
Release Notes:
- collab: Add `collab_panel::OpenSelectedChannelNotes` action
(`alt-enter` by default)
Add default keybinding for `pane::SplitRight` in the `Terminal` context
for all platforms.
Closes #ISSUE
Release Notes:
- Added VS Code's terminal split keybindings (`cmd` on MacOS,
`ctrl-shift-5` on Windows and Linux)
---------
Co-authored-by: dino <dinojoaocosta@gmail.com>
I just pulled and ran a local build via `script/bundle-mac -l -i` but
found that the resulting bundle wasn't installed as expected. (me:
"ToggleAllDocks!! Wait! Where is it?!") Looking into, it looks like the
`-l` flag was removed in #41392, leaving the `$local_only` var orphaned,
which then left the `-i/$local_install` flag unreachable. I suspect that
this was unintentional, so this PR re-adds the `-l/$local_only` flag to
`script/bundle-mac`.
I ran the build again and confirmed that local install seemed to work as
expected. (ie "ToggleAllDocks!! 🎉")
While here, I also removed the last reference to `$local_arch`, because
all other references to that were removed in #41392.
/cc @osiewicz
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
We'll now perform all searches from the context model concurrently, and
combine queries for the same glob into one reducing the total number of
project searches.
For better readability, the debug context view now displays each
top-level regex alternation individually, grouped by its corresponding
glob:
<img width="1592" height="672" alt="CleanShot 2025-10-29 at 19 56 03@2x"
src="https://github.com/user-attachments/assets/f6e8408e-09d6-4e27-ba11-a739a772aa12"
/>
Release Notes:
- N/A
