Closes#8628
Release Notes:
- Added support for resizing the current pane using vim keybinds with
the intention to follow the functionality of vim
- "ctrl-w +" to make a pane taller
- "ctrl-w -" to make the pane shorter
- "ctrl-w >" to make a pane wider
- "ctrl-w <" to make the pane narrower
- Changed vim pre_count and post_count to globals to allow for other
crates to use the vim count. In this case, it allows for resizing by
more than one unit. For example, "10 ctrl-w -" will decrease the height
of the pane 10 times more than "ctrl-w -"
- This pr does **not** add keybinds for making all panes in an axis
equal size and does **not** add support for resizing docks. This is
mentioned because these could be implied by the original issue
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes#20858
This fix depends on the sanitization logic implemented in PR #20577.
Since that branch may undergo further changes, this branch will be
periodically rebased on it. Once #20577 is merged, the dependency will
no longer apply.
Release Notes:
- Fix missing or duplicated files when copying multiple items in the
project panel.
- Fix marked files not being deselected after selecting a directory on
primary click.
- Fix "copy path" and "copy path relative" with multiple items selected
in project panel.
**Problem**:
In this case, `dir1` is selected while `dir2`, `dir3`, and `dir1/file`
are marked. Using the `marked_entries` function results in only `dir1`,
which is incorrect.
<img height="120"
src="https://github.com/user-attachments/assets/d4d92cc5-c998-4948-9a58-25c4f54167f2"
/>
Currently, the `marked_entries` function is used in five actions, which
all produce incorrect results:
1. Delete (via the disjoint function)
2. Copy
3. Cut
4. Copy Path
5. Copy Path Relative
**Solution**:
1. `marked_entries` function should not use "When currently selected
entry is not marked, it's treated as the only marked entry." logic.
There is no grand scheme behind this logic as confirmed by piotr
[here](https://github.com/zed-industries/zed/issues/17746#issuecomment-2464765963).
2. `copy` and `cut` actions should use the disjoint function to prevent
obivous failures.
3. `copy path` and `copy path relative` should keep using *fixed*
`marked_entries` as that is expected behavior for these actions.
---
1. Before/After: Partial Copy
Select `dir1` and `c.txt` (in that order, reverse order works!), and
copy it and paste in `dir2`. `c.txt` is not copied in `dir2`.
<img height="170"
src="https://github.com/user-attachments/assets/a09fcb40-f38f-46ef-b0b4-e44ec01dda18"
/>
<img height="170"
src="https://github.com/user-attachments/assets/bb87dbe5-8e2e-4ca4-a565-42be5755ec8a"
/>
---
2. Before/After: Duplicate Copy
Select `a.txt`, `dir1` and `c.txt` (in that order), and copy it and
paste in `dir2`. `a.txt` is duplicated in `dir2`.
<img height="170"
src="https://github.com/user-attachments/assets/6f999d22-3607-48d7-9ff6-2e27494002f8"
/>
<img height="170"
src="https://github.com/user-attachments/assets/b4b6ff7d-0df7-45ea-83e4-50a0acb18457"
/>
---
3. Before/After: Directory Selection
Simply primary click on any file, now primary click on any dir. That
previous file is still marked.
<img height="170"
src="https://github.com/user-attachments/assets/9f1948ce-7445-4377-9733-06490ed6a324"
/>
<img height="170"
src="https://github.com/user-attachments/assets/e78203bc-96ba-424b-b588-c038992a9f0e"
/>
---
4. Before/After: Copy Path and Copy Path Relative
Upon `copy path` (ctrl + alt + c):
Before: Only `/home/tims/test/dir2/a.txt` was copied.
After: All three paths `/home/tims/test/dir2`, `/home/tims/test/c.txt`
and `/home/tims/test/dir2/a.txt` are copied.
This is also how VSCode also copies path when multiple are selected.
<img height="170"
src="https://github.com/user-attachments/assets/e20423ea-1682-4efd-b208-631e2edd3771"
/>
Change the "Apply" and "Discard" buttons to match @danilo-leal's design!
Here are some different states:
### Cursor in the first hunk
Now that the cursor is in a particular hunk, we show the "Apply" and
"Discard" names, and the keyboard shortcut. If I press the keyboard
shortcut, it will only apply to this hunk.
<img width="759" alt="Screenshot 2024-11-23 at 10 54 45 PM"
src="https://github.com/user-attachments/assets/68e0f109-9493-4ca2-a99c-dfcbb4d1ce0c">
### Cursor in the second hunk
Moving the cursor to a different hunk changes which buttons get the
keyboard shortcut treatment. Now the keyboard shortcut is shown next to
the hunk that will actually be affected if you press that shortcut.
<img width="749" alt="Screenshot 2024-11-23 at 10 56 27 PM"
src="https://github.com/user-attachments/assets/59c2ace3-6972-4a60-b806-f45e8c25eaae">
Release Notes:
- Restyled Apply/Discard buttons
---------
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Danilo Leal <67129314+danilo-leal@users.noreply.github.com>
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Co-authored-by: Bennet Bo Fenner <53836821+bennetbo@users.noreply.github.com>
Fix cmd-pipe
Remove redudnant jetbrains/sublime keybinds (these exist as `cmd-{` and `cmd-}` under default vscode keymap) and were broken as part of the recent keybind changes.
Remove excess JSON whitespace from tests to make them more readable.
Follow-up of https://github.com/zed-industries/zed/pull/21173
Rust-analyzer with `checkOnSave` enabled will push diagnostics for a
file after each diagnostics refresh (e.g. save, file open, file close).
If there's a file that is not open in any pane and has only warnings,
and the diagnostics editor has warnings toggled off, then
0. rust-analyzer will push the corresponding warnings after initial load
1. the diagnostics editor code registers
`project::Event::DiagnosticsUpdated` for the corresponding file path and
opens the corresponding buffer to read its associated diagnostics from
the snapshot
2. opening the buffer would send `textDocument/didOpen` which would
trigger rust-analyzer to push the same diagnostics
3. meanwhile, the diagnostics editor would filter out all diagnostics
for that buffer, dropping the open buffer and effectively closing it
4. closing the buffer will send `textDocument/didClose` which would
trigger rust-analyzer to push the same diagnostics again, as those are
`cargo check` ones, still present in the file
5. GOTO 1
Release Notes:
- Fixed diagnostics editor not scrolling properly under certain
conditions
This PR restructures the storage of the tool uses and results in
`assistant2` so that they don't live on the individual messages.
It also introduces a `LanguageModelToolUseId` newtype for better type
safety.
Release Notes:
- N/A
This PR adds rudimentary support for using tools to `assistant2`. There
are currently no visual affordances for tool use.
This is gated behind the `assistant-tool-use` feature flag.
<img width="1079" alt="Screenshot 2024-11-25 at 7 21 31 PM"
src="https://github.com/user-attachments/assets/64d6ca29-c592-4474-8e9d-c344f855bc63">
Release Notes:
- N/A
This PR factors the tool definitions out of the `assistant` crate so
that they can be shared between `assistant` and `assistant2`.
`ToolWorkingSet` now lives in `assistant_tool`. The tool definitions
themselves live in `assistant_tools`, with the exception of the
`ContextServerTool`, which has been moved to the `context_server` crate.
As part of this refactoring I needed to extract the
`ContextServerSettings` to a separate `context_server_settings` crate so
that the `extension_host`—which is referenced by the `remote_server`—can
name the `ContextServerSettings` type without pulling in some undesired
dependencies.
Release Notes:
- N/A
This PR makes it so previous messages in the thread are included when
constructing the completion request, instead of only sending up the most
recent user message.
Release Notes:
- N/A
This is a pure refactor, motivated by wanting to introduce to the
BufferStore new logic for opening staged and committed changes.
I found the `BufferStoreImpl` trait a little bit confusing, particularly
how the different implementors of the trait held a handle back to the
owning buffer store. I was able to reduce the amount of code
considerably (-78 lines) by using a two-variant enum instead, similar to
what we do for `LspStore`, `WorktreeStore` and `Worktree`.
Release Notes:
- N/A
This reverts #20824 and #20899. After adding them last week we came to
the conclusion that the hints are too distracting in everyday use, see
#21128 for more details.
Release Notes:
- N/A
Fixes a bug with terminal splits panicking during writing a command in
the command input
Release Notes:
- N/A
Co-authored-by: Antonio Scandurra <antonio@zed.dev>
@bennetbo @as-cii @mrnugget I'm really not liking the hints about AI on
every line. It feels too distracting to me and damaging to the user
experience. I'm wondering if we can hide them and work with design for
other ideas. Or at least talk it through.
Release Notes:
- N/A
This needs scrutinized. Detailed breakdown of what events I kept and
threw out here:
https://zed.dev/channel/app-events-17178/notes
I also removed a few fake events and tossed out json properties that
were being inserted for things we don't have logic to track. See PR
review comments below.
I think the only bad data we have are that we were identifying all node,
pnpm, and yarn projects as 'node' in the `project_type` property, so a
few days of lost data there.
Release Notes:
- N/A
This PR factors the language model selector out into its own
`language_model_selector` crate so that it can be reused in
`assistant2`.
Also renamed it from `ModelSelector` to `LanguageModelSelector` to be a
bit more specific.
Release Notes:
- N/A
This PR breaks ground on a new `assistant2` crate.
In order to see this new version of the assistant, both of the following
must be true:
1. The `assistant2` feature flag is enabled for your user
- It is **not** currently enabled for all staff.
2. You are running a development build of Zed
The intent here is to enable the folks working on `assistant2` to
incrementally land work onto `main` without breaking use of the current
Assistant for anyone.
<img width="1136" alt="Screenshot 2024-11-23 at 10 46 08 AM"
src="https://github.com/user-attachments/assets/5723a13f-5be1-4486-9460-ead7329ba78e">
Release Notes:
- N/A
Fixes docs to reflect that Protobuf support is via extension.
Comment out references ProtoLS formatter.
Need to test both protols and protobuf-language-server to ensure both work.
