This should fix issues when we update a module it's content. That wouldn't show up anymore. So by always resetting the list we should get the most up-to-date value.
NOTE: We probably want to reduce the amount of resets and notifies every time we update the client state, even though we didn't update the modules.
We could send and specific event from the client state, each time we update a module. So instead of using a observer we could use a normal event subscriber and only update the list based on that event
* WIP setup active debug sessions request
* Set up active debug sessions request that's send when joining a project
* Fix test debug panel console
* Remove debugger tables from collab db
* Wip request active debug sessions
* WIP
Co-Authored-By: Piotr Osiewicz <piotr@zed.dev>
Co-Authored-By: Anthony Eid <hello@anthonyeid.me>
* Tear stuff out and make the world burn
Co-authored-by: Remco Smits <djsmits12@gmail.com>
Co-authored-by: Piotr <piotr@zed.dev>
* Fix compile errors
* Remove dap_store from module list and fix some warnings
Module list now uses Entity<DebugSession> to get active modules and handle remote/local state
so dap_store is no longer needed
* Add Cacheable Command trait
This gets rid of ClientRequest or whatever the name was; we don't need to enumerate every possible request and repeat ourselves, instead letting you mark any request as cached with no extra boilerplate.
* Add Eq requirement for RequestSlot
* Implement DapCommand for Arc<DapCommand>
That way we can use a single allocated block for each dap command to store it as both the cache key and the command itself.
* Clone Arc on demand
* Add request helper
* Start work on setting up a new dap_command_handler
* Make clippy pass
* Add loaded sources dap command
* Set up module list test to see if Modules request is called
* Fix compile warnings
* Add basic local module_list test
* Add module list event testing to test_module_list
* Bring back as_any_arc
* Only reset module list's list state when modules_len changes
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Anthony Eid <56899983+Anthony-Eid@users.noreply.github.com>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Piotr <piotr@zed.dev>
- Adds the `panel` crate for defining UI shared between panels, like
common button and header designs, etc
- Starts to update the git ui to be more consistent with other panels
Release Notes:
- N/A
This PR makes adding icons to the primary and secondary actions, in the
`MessageNotification` component, optional. Also took the opportunity to
remove a probably unnecessary "third action" from it; streamlining the
component API (we had added that for a design that we're not using
anymore). I did keep the "more info" possibility, which may be useful in
the future, though.
Release Notes:
- N/A
Follow-up to https://github.com/zed-industries/zed/pull/24278
This PR ensures we're checking if there's a license-type file in both US
& UK English spelling, and fixes the error logging again, treating for
when the worktree contains just a single file or multiple.
Release Notes:
- N/A
Co-authored-by: Bennet Bo Fenner <53836821+bennetbo@users.noreply.github.com>
Go back to a less optimized implementation for now since the custom
cursor target seems to have some bugs.
Release Notes:
- Fixed missing git blame and status output in some projects with
multiple git repositories
Rework of https://github.com/zed-industries/zed/pull/24130
Uses
1033c0b57e
`COMMIT_EDITMSG` language-related definitions (thanks @d1y )
Instead of using real `.git/COMMIT_EDITMSG` file, create a buffer
without FS representation, stored in the `Repository` and shared the
regular way via the `BufferStore`.
Adds a knowledge of what `Git Commit` language is, and uses it in the
buffers which are rendered in the git panel.
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad@zed.dev>
Co-authored-by: d1y <chenhonzhou@gmail.com>
Co-authored-by: Smit <smit@zed.dev>
When you have an edit prediction available, you can now also accept it
with `alt-tab` (or `alt-enter` on Linux) even if you don't have an LSP
completions menu open. This is meant to lower the mental load when going
from one mode to another.
Release Notes:
- N/A
This PR updates the Zed extension CLI with support for populating the
`provides` field in the generated extension manifest.
This field will contain the set of features that the extension provides.
For example:
```
"provides": ["themes", "icon-themes"]
```
Release Notes:
- N/A
* Reapply "Lazy load stack frame information (scopes & variables) (#106)"
This reverts commit 27b60436b8.
* Reapply "Remove futures from debugger ui crate"
This reverts commit 3cf96588e2.
* Don't fetch initial variables twice
This was introduced by my original PR, because I added the fetch on stack frame select but when the stack frames where updated we would already fetch the initial variables. And when the selectedStackFrameUpdated event was received we would refetch it because it was not done yet.
* Remove duplicated method just for testing
* Make keep open entries work again
The issue was the we used the scope_id, which changes after each debug step. So using the name of the scope instead should be more reliable.
* Correctly invalidate variable list information
* Comment out collab variable list for now
Also commenting out an event that triggers the infinite loop.
We want to revisited the collab stuff anyway so we decided to do it this way.
This PR makes adding icons to the primary and secondary actions, in the
`MessageNotification` component, optional. Also took the opportunity to
remove a probably unnecessary "third action" from it; streamlining the
component API (we had added that for a design that we're not using
anymore). I did keep the "more info" possibility, which may be useful in
the future, though.
Release Notes:
- N/A
Follow-up to https://github.com/zed-industries/zed/pull/24278
This PR ensures we're checking if there's a license-type file in both US
& UK English spelling, and fixes the error logging again, treating for
when the worktree contains just a single file or multiple.
Release Notes:
- N/A
Co-authored-by: Bennet Bo Fenner <53836821+bennetbo@users.noreply.github.com>
Go back to a less optimized implementation for now since the custom
cursor target seems to have some bugs.
Release Notes:
- Fixed missing git blame and status output in some projects with
multiple git repositories
Rework of https://github.com/zed-industries/zed/pull/24130
Uses
1033c0b57e
`COMMIT_EDITMSG` language-related definitions (thanks @d1y )
Instead of using real `.git/COMMIT_EDITMSG` file, create a buffer
without FS representation, stored in the `Repository` and shared the
regular way via the `BufferStore`.
Adds a knowledge of what `Git Commit` language is, and uses it in the
buffers which are rendered in the git panel.
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad@zed.dev>
Co-authored-by: d1y <chenhonzhou@gmail.com>
Co-authored-by: Smit <smit@zed.dev>
When you have an edit prediction available, you can now also accept it
with `alt-tab` (or `alt-enter` on Linux) even if you don't have an LSP
completions menu open. This is meant to lower the mental load when going
from one mode to another.
Release Notes:
- N/A
- **Base diffs on uncommitted changes**
- **Show added files in project diff view**
- **Fix git panel optimism**
Release Notes:
- Git: update diffs to be relative to HEAD instead of the index; to pave
the way for showing which hunks are staged
---------
Co-authored-by: Cole <cole@zed.dev>
This is a pure refactor that somewhat reduces the amount of code needed
when handling diff base changes. There's also a small performance gain
from reparsing the staged text and computing a new diff in parallel when
we weren't previously.
Release Notes:
- N/A
Co-authored-by: Max <max@zed.dev>
This PR updates the check that prevents subscribing with overdue
subscriptions to use the `billing_customers.has_overdue_invoices` field
instead.
This will allow us to set the value of `has_overdue_invoices` to `false`
when the invoices have been paid.
Release Notes:
- N/A
This PR adds a new `has_overdue_invoices` field to the
`billing_customers` table.
This will be used to statefully track whether a customer has overdue
invoices, and also to reset it when the invoices are paid.
We will set this field to `true` when a subscription is canceled with
the reason `payment_failed`.
Release Notes:
- N/A
