Fixes a regression introduced in
https://github.com/zed-industries/zed/pull/39857. As for the exact
reason this causes this issue I am not yet sure will investigate (as per
the todos in code)
Fixes ZED-23R
Release Notes:
- N/A *or* Added/Fixed/Improved ...
This PR does two related things:
- First, it gets rid of the undifferentiated `RepositoryEvent::Updated`
in favor of three new events that have clearer definitions:
`BranchChanged`, `StashEntriesChanged`, and `StatusesChanged`. An
implication of this is that we no longer emit a `RepositoryEvent` unless
some git state changed; previously we would emit `RepositoryUpdated`
after doing a git status scan even if no statuses changed.
- Second, it changes the subscription strategy of the project diff to
make it update more robustly. Previously, the project diff only
subscribed to the `GitStore`, so it relied on getting a `GitStoreEvent`
when some buffer's diff hunks changed, even if the git status of the
buffer's file didn't change (e.g. a second hunk in a file that was
already modified). After this PR, it also subscribes to the individual
`BufferDiff` entities for buffers that have a git status, so the
`GitStore` is freed from that responsibility. This also fixes some real
cases where the previous strategy was not effective in keeping the
project diff up to date (captured in a test).
Release Notes:
- Fixed some cases where the project diff would fail to update in
response to git events.
This simplifies some code and is also more correct in some others (I
believe some of these might've overflowed causing panics in sentry)
Release Notes:
- N/A *or* Added/Fixed/Improved ...
In an attempt to figure out what's wrong with `point_to_buffer_offset`
for crash https://github.com/zed-industries/zed/issues/40453. We want to
know which branch among these two is the bad one.
Release Notes:
- N/A
Co-authored-by: Lukas Wirth <lukas@zed.dev>
Reduces peak stack usage in these functions and should generally be a
bit performant.
Display map benchmark results
```
To tab point/to_tab_point/1024
time: [531.40 ns 532.10 ns 532.97 ns]
change: [-2.1824% -2.0054% -1.8125%] (p = 0.00 < 0.05)
Performance has improved.
Found 1 outliers among 100 measurements (1.00%)
1 (1.00%) high severe
To fold point/to_fold_point/1024
time: [530.81 ns 531.30 ns 531.80 ns]
change: [-2.0295% -1.9054% -1.7716%] (p = 0.00 < 0.05)
Performance has improved.
Found 3 outliers among 100 measurements (3.00%)
2 (2.00%) high mild
1 (1.00%) high severe
```
Release Notes:
- N/A *or* Added/Fixed/Improved ...
- Notable change is the use of a newtype for `ReplicaId`
- Fixes `WorktreeStore::create_remote_worktree` creating a remote
worktree with the local replica id, though this is not currently used
- Fixes observing the `Agent` (that is following the agent) causing
global clocks to allocate 65535 elements
- Shrinks the size of `Global` a bit. In a local or non-collab remote
session it won't ever allocate still.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
`MultiBuffer::anchor_in_excerpt` currently just wraps the given text
anchor in a multibuffer anchor. This allows one to get a multibuffer
anchor that points outside its excerpt which is basically never what one
wants. This PR now does a bounds check and returns `None` if the given
text anchor is not within the bounds of the excerpt.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Fixes the `Open Diff` action for untracked files when the `sort_by_path`
setting is enabled. The `ProjectDiff` wasn't correctly moving the
multibuffer's cursor to the untracked file because, when that setting is
enabled, it's sort prefix is changed to the tracked files sort prefix, and that
wasn't accounted for in `move_to_entry`.
Before these changes, the `sort_prefix` field for `PathKey` was called `namespace`, it was renamed to be clearer what its purpose is.
Closes#39529
Release Notes:
- Fixed 'Open Diff' action for untracked files when `sort_by_path` is
enabled
---------
Co-authored-by: David Kleingeld <davidsk@zed.dev>
This takes the idea that @RemcoSmitsDev started on in
https://github.com/zed-industries/zed/pull/39354. We did away with
grabbing a snapshot of the display map when buffer coordinates were
sufficient.
Closes#37267
Release Notes:
- Reduced micro-stutters in project search with large multi-buffer
contents.
---------
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
The ordering of path-based excerpts in multibuffers regressed with
#38744, because we changed the `path` field of `PathKey` to be a string
(from `std::path::Path`) and used the derived `Ord` implementation,
which doesn't agree with the path-based order of worktree traversals.
This PR fixes that by using `RelPath` for `PathKey`. Instead of using
`File::full_path`, which can be absolute, we always use `File::path` and
distinguish different worktrees using their ID.
Release Notes:
- N/A
---------
Co-authored-by: Lukas Wirth <me@lukaswirth.dev>
This removes a hack from `MultiBuffer::anchor_at` that works around
missing logic for handling `ExcerptId::max()` by implementing that said
missing logic.
Generally, `ExcerptId::min()` is already being handled correctly due to
how `Cursor` seeking works, we tend to seek to or beyond a seek target,
meaning `min` will always match the first excerpt as expected. `max` on
the other hand will always seek beyond the last excerpt resulting in no
excerpt being found, so any code path dealing with the excerpt sumtree
will have to specially check for this special excerpt ID to work
correctly.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Closes https://github.com/zed-industries/zed/issues/38690Closes#37353
### Background
On Windows, paths are normally separated by `\`, unlike mac and linux
where they are separated by `/`. When editing code in a project that
uses a different path style than your local system (e.g. remoting from
Windows to Linux, using WSL, and collaboration between windows and unix
users), the correct separator for a path may differ from the "native"
separator.
Previously, to work around this, Zed converted paths' separators in
numerous places. This was applied to both absolute and relative paths,
leading to incorrect conversions in some cases.
### Solution
Many code paths in Zed use paths that are *relative* to either a
worktree root or a git repository. This PR introduces a dedicated type
for these paths called `RelPath`, which stores the path in the same way
regardless of host platform, and offers `Path`-like manipulation APIs.
RelPath supports *displaying* the path using either separator, so that
we can display paths in a style that is determined at runtime based on
the current project.
The representation of absolute paths is left untouched, for now.
Absolute paths are different from relative paths because (except in
contexts where we know that the path refers to the local filesystem)
they should generally be treated as opaque strings. Currently we use a
mix of types for these paths (std::path::Path, String, SanitizedPath).
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Peter Tripp <petertripp@gmail.com>
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
Co-authored-by: Lukas Wirth <me@lukaswirth.dev>
Co-Authored-By: Ben K <ben@zed.dev>
Co-Authored-By: Anthony <anthony@zed.dev>
Co-Authored-By: Mikayla <mikayla@zed.dev>
Release Notes:
- settings: Major internal changes to settings. The primary user-facing
effect is that some settings which did not make sense in project
settings files are no-longer read from there. (For example the inline
blame settings)
---------
Co-authored-by: Ben Kunkle <ben@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
Co-authored-by: Anthony <anthony@zed.dev>
This allows you to write `buffer_snapshot.debug(ranges, value)` and it
will be displayed in the buffer (or multibuffer!) until that callsite
runs again. `ranges` can be any position (`usize`, `Anchor`, etc), any
range, or a slice or vec of those. `value` just needs a `Debug` impl.
These are stored in a mutable global for convenience, and this is only
available in debug builds.
For example, using this to visualize the captures of the brackets
Tree-sitter query:
<img width="1215" height="480" alt="image"
src="https://github.com/user-attachments/assets/c1878fc7-f6b3-4e27-949e-ecf67a7906b9"
/>
Release Notes:
- N/A
A very primitive attempt, we just key the editor with the locations and
re-use the editor if we open a new buffer with the same initial
locations and title.
Release Notes:
- Added reusing of reference search buffers when applicable
## Context
While looking into: #32051 and #16120 with instruments, I noticed that
`TabSnapshot::to_tab_point` and `TabSnapshot::to_fold_point` are a
common bottleneck between the two issues. This PR takes the first steps
into closing the stated issues by improving the performance of both
those functions.
### Method
`to_tab_point` and `to_fold_point` iterate through each character in
their rows to find tab characters and translate those characters into
their respective transformations. This PR changes this iteration to take
advantage of the tab character bitmap in the `Rope` data structure and
goes directly to each tab character when iterating.
The tab bitmap is now passed from each layer in-between the `Rope` to
the `TabMap`.
### Testing
I added several randomized tests to ensure that the new `to_tab_point`
and `to_fold_point` functions have the same behavior as the old methods
they're replacing. I also added `test_random_chunk_bitmap` on each layer
the tab bitmap is passed up to the `TabMap` to make sure that the bitmap
being passed is transformed correctly between the layers of
`DisplayMap`.
`test_random_chunk_bitmap` was added to these layers:
- buffer
- multi buffer
- custom_highlights
- inlay_map
- fold_map
## Benchmarking
I setup benchmarks with criterion that is runnable via `cargo bench -p
editor --profile=release-fast`. When benchmarking I had my laptop
plugged in and did so from the terminal with a minimal amount of
processes running. I'm also on a m4 max
### Results
#### To Tab Point
Went from completing 6.8M iterations in 5s with an average time of
`736.13 ns` to `683.38 ns` which is a `-7.1875%` improvement
#### To Fold Point
Went from completing 6.8M iterations in 5s with an average time of
`736.55 ns` to `682.40 ns` which is a `-7.1659%` improvement
#### Editor render
Went from having an average render time of `62.561 µs` to `57.216 µs`
which is a `-8.8248%` improvement
#### Build Buffer with one long line
Went from having an average buffer build time of `3.2549 ms` to `3.2635
ms` which is a `+0.2151%` regression within the margin of error
#### Editor with 1000 multi cursor input
Went from having an average edit time of `133.05 ms` to `122.96 ms`
which is a `-7.5776%` improvement
Release Notes:
- N/A
---------
Co-authored-by: Remco Smits <djsmits12@gmail.com>
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Extracts and cleans up GPUI's scheduler code into a new `scheduler`
crate, making it pluggable by external runtimes. This will enable
deterministic integration testing with cloud components by providing a
unified test scheduler across Zed and backend code. In Zed, it will
replace the existing GPUI scheduler for consistent async task management
across platforms.
## Changes
- **Core Implementation**: `TestScheduler` with seed-based
randomization, session tracking (`SessionId`), and foreground/background
task separation for reproducible testing.
- **Executors**: `ForegroundExecutor` (!Send, thread-local) and
`BackgroundExecutor` (Send, with blocking/timeout support) as
GPUI-compatible wrappers.
- **Clock and Timer**: Controllable `TestClock` and future-based `Timer`
for time-sensitive tests.
- **Testing APIs**: `once()`, `with_seed()`, and `many()` methods for
configurable test runs.
- **Dependencies**: Added `async-task`, `chrono`, `futures`, etc., with
updates to `Cargo.toml` and lock file.
## Benefits
- **Integration Testing**: Facilitates reliable async tests involving
cloud sessions, reducing flakiness via deterministic execution.
- **Pluggability**: Trait-based design (`Scheduler`) allows easy
integration into non-GPUI runtimes while maintaining GPUI compatibility.
- **Cleanup**: Refactors GPUI scheduler logic for clarity, correctness
(no `unwrap()`, proper error handling), and extensibility.
Follows Rust guidelines; run `./script/clippy` for verification.
- [x] Define and test a core scheduler that we think can power our cloud
code and GPUI
- [ ] Replace GPUI's scheduler
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
This PR cleans up some emitted events around the codebase. These events
are either never emitted or never listened for.
It seems better to re-implement these at some point should they again be
needed - this ensures that they will actually be fired in the cases
where they are needed as opposed to being there and getting unreliable
and stale (which is already the case for the majority of the events
removed here).
Lastly, this ensures the `CapabilitiesChanged` event is not fired too
often.
Release Notes:
- N/A
