* Follows-up https://github.com/zed-industries/zed/pull/22224 , by
adjusting `impl PartialEq for OutlineEntryOutline` to compare outline
items' values too.
Before that, all outline items from the same excerpt were considered
equal.
Adds a test for this
* Stops re-revealing items in the outline panel, when it's focused: now,
when someone scrolls over outline panel items, there is no extra work
happening: the "revealed" item is the one scrolled to
Release Notes:
- Fixed outline items not scrolling properly
In #22620 `diagnostic_group` was modified to return results for
multibuffers, but was returning singleton buffer points. `hover_popover`
uses it to find the jump target for clicking the popup - which doesn't
seem to be working right now but that's a separate issue. Now that
`diagnostic_group` is returning values in multibuffers converting these
to anchors was crashing.
Also resolves a potential bug - if folding in multibuffers was supported
then "Go To Diagnostics" would not properly skip diagnostics from folded
regions.
Release Notes:
- N/A
Changes:
- [x] Increase expand affordance surface area
- [x] Ensure expand buttons have tooltips with keybindings
- [x] Make line numbers clickable to jump you to location (only in
multibuffers)
- [x] Hide the "Jump To File" element in not-focused excerpts
Before merging it:
- [x] Fix off-by-one header focus styles glitch
Improvements to consider for follow-up PRs:
1. Experiment with increasing the width of the clickable surface area
for line numbers
2. Don't show (or disable) the "expand excerpt" button when at the top
or bottom edge of the file
3. Once you jump to location, centralize the cursor scroll position
Release Notes:
- Improved multibuffer's "expand excerpt" affordance
- Fixed "jump to file/location" and "expand excerpt" keybinding display
- Made clicking on line numbers in multibuffers jump you to cursor
location in file
---------
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
Co-authored-by: Agus Zubiaga <hi@aguz.me>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Co-authored-by: Agus Zubiaga <agus@zed.dev>
This is quite experimental and untested in languages other than Rust.
It's written to attempt to do something sensible in many languages. Due
to its experimental nature, just releasing to staff, and so not
including it in release notes. Future release note might be "Improved
diagnostic excerpts by using syntactic info to determine the context
lines to show."
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/4925https://github.com/user-attachments/assets/e7b87375-893f-41ae-a2d9-d501499e40d1
Allows to fold any buffer inside multi buffers, either by clicking the
chevron icon on the header, or by using
`editor::Fold`/`editor::UnfoldLines`/`editor::ToggleFold`/`editor::FoldAll`
and `editor::UnfoldAll` actions inside the multi buffer (those were noop
there before).
Every fold has a fake line inside it, so it's possible to navigate into
that via the keyboard and unfold it with the corresponding editor
action.
The state is synchronized with the outline panel state: any fold inside
multi buffer folds the corresponding file entry; any file entry fold
inside the outline panel folds the corresponding buffer inside the multi
buffer, any directory fold inside the outline panel folds the
corresponding buffers inside the multi buffer for each nested file entry
in the panel.
Release Notes:
- Added a possibility to fold buffers inside multi buffers
---------
Co-authored-by: Antonio Scandurra <antonio@zed.dev>
Co-authored-by: Max Brunsfeld <max@zed.dev>
Co-authored-by: Cole Miller <cole@zed.dev>
Still TODO:
* [x] Factor out `start_language_server` so we can call it on register
(instead of on detect language)
* [x] Only call register in singleton editors (or when
editing/go-to-definition etc. in a multibuffer?)
* [x] Refcount on register so we can unregister when no buffer remain
* [ ] (maybe) Stop language servers that are no longer needed after some
time
Release Notes:
- Fixed language servers starting when doing project search
- Fixed high CPU usage when ignoring warnings in the diagnostics view
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Cole <cole@zed.dev>
This is a pure refactor of our Git diff state management. Buffers are no
longer are associated with one single diff (the unstaged changes).
Instead, there is an explicit project API for retrieving a buffer's
unstaged changes, and the `Editor` view layer is responsible for
choosing what diff to associate with a buffer.
The reason for this change is that we'll soon want to add multiple "git
diff views" to Zed, one of which will show the *uncommitted* changes for
a buffer. But that view will need to co-exist with other views of the
same buffer, which may want to show the unstaged changes.
### Todo
* [x] Get git gutter and git hunks working with new structure
* [x] Update editor tests to use new APIs
* [x] Update buffer tests
* [x] Restructure remoting/collab protocol
* [x] Update assertions about staged text in
`random_project_collaboration_tests`
* [x] Move buffer tests for git diff management to a new spot, using the
new APIs
Release Notes:
- N/A
---------
Co-authored-by: Richard <richard@zed.dev>
Co-authored-by: Cole <cole@zed.dev>
Co-authored-by: Conrad <conrad@zed.dev>
Closes#19054
Rename `max_buffer_row()` to `widest_line_number()` to (hopefully)
prevent
people assuming it means the same as `max_point().row`.
Release Notes:
- Fixed a panic when folding in a multibuffer
Co-Authored-By: Max <max@zed.dev>
Release Notes:
- vim: Added motions `[[`, `[]`, `]]`, `][` for navigating by section,
`[m`, `]m`, `[M`, `]M` for navigating by method, and `[*`, `]*`, `[/`,
`]/` for comments. These currently only work for languages built in to
Zed, as they are powered by new tree-sitter queries.
- vim: Added new text objects: `ic`, `ac` for inside/around classes,
`if`,`af` for functions/methods, and `g c` for comments. These currently
only work for languages built in to Zed, as they are powered by new
tree-sitter queries.
---------
Co-authored-by: Max <max@zed.dev>
Motivation for this is to make things more understandable while figuring
out #20775.
This is intended to be a refactoring that does not affect behavior, but
there are a few tricky spots:
* Previously `File.mtime()` (now `File.disk_state().mtime()`) would
return last known modification time for deleted files. Looking at uses,
I believe this will not affect anything. If there are behavior changes
here I believe they would be improvements.
* `BufferEvent::DirtyChanged` is now only emitted if dirtiness actually
changed, rather than if it may have changed. This should only be an
efficiency improvement.
Release Notes:
- N/A
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
* `has_conflict` will now return true if the file has been deleted on
disk. This is for treating multi-buffers as conflicted, and also
blocks auto-save.
* `has_deleted_file` is added so that the single-file buffer save can
specifically mention the delete conflict. This does not yet handle
discard (#20745).
Closes#9101Closes#9568Closes#20462
Release Notes:
- Improved handling of externally deleted files: auto-save will be
disabled, multibuffers will treat this as a save conflict, and single
buffers will ask for restore confirmation.
Co-authored-by: Conrad <conrad@zed.dev>
Closes https://github.com/zed-industries/zed/issues/8534
Supersedes https://github.com/zed-industries/zed/pull/16349
Potential concerns:
* we do not follow up to the `/` when looking for `.editorconfig`, only
up to the worktree root.
Seems fine for most of the cases, and the rest should be solved
generically later, as the same issue exists for settings.json
* `fn language` in `AllLanguageSettings` is very hot, called very
frequently during rendering. We accumulate and parse all `.editorconfig`
file contents beforehand, but have to go over globs and match these
against the path given + merge the properties still.
This does not seem to be very bad, but needs more testing and
potentially some extra caching.
Release Notes:
- Added .editorconfig support
---------
Co-authored-by: Ulysse Buonomo <buonomo.ulysse@gmail.com>
This simplifies rendering of excerpt headers and footers, and removes
the need to store a `BlockDisposition` on these boundary blocks. It's a
step toward implementing "replace blocks", which we want to use in the
assistant panel.
We've also cleaned up the way heights are specified for headers and
footers and fixed some visual asymmetries between the "expand upward"
and "expand downward" buttons.
Release Notes:
- N/A
---------
Co-authored-by: Richard <richard@zed.dev>
* Create basic breakpoint prompt editor structure
* Get breakpoint prompt to properly render
* Fix bug where toggle breakpoint failed to work
This bug occurs when a breakpoint anchor position is moved from the begining
of a line. This causes dap_store.breakpoint hashmap to fail to properly get
the correct element, thus toggling the wrong breakpoint.
The fix to this bug is passing a breakpoint anchor to an editor's display map
and to the render breakpoint function. Instead of creating a new anchor when
clicking on a breakpoint icon, zed will use the breakpoint anchor passed to
the display map.
In the case of using toggle breakpoint action, zed will iterate through all
breakpoints in that buffer to check if any are on the cursor's line number,
then use anchor if found. Otherwise, zed creates a new anchor.
* Fix bug where breakpoint icon overlaps with other icons
This bug happened when an icon {code action | code runner} was rendered on the same line of a breakpoint
where that breakpoint's anchor was not at the start of the line
* Get breakpoint prompt to add log breakpoint's correctly
* Clean up breakpoint prompt UI & allow editting of log messages
---------
Co-authored-by: Remco Smits <djsmits12@gmail.com>
We are going to use this in the multi-buffer to produce a summary for an
`Excerpt` that contains a `Range<Anchor>`.
Release Notes:
- N/A
Co-authored-by: Nathan <nathan@zed.dev>
Closes#18254Closes#18219Closes#17690
This fixes the project search not highlighting all results.
The problem was relatively simple, even though it took a while to find
it: we inserted multiple excerpts concurrently and the order in the
multi-buffer ended up being wrong. Sorting the resulting `match_ranges`
fixed the problem, but as it turns out, we can do a better job by moving
the concurrency into the method on the MultiBuffer.
Performance is the same, but now the problem is fixed.
Release Notes:
- Fixed search results in project-wide search not being highlighted
consistently and navigation sometimes being broken (#18254, #18219,
#17690)
---------
Co-authored-by: Bennet <bennet@zed.dev>
This PR introduces functionality for creating *branches* of buffers that
can be used to preview and edit change sets that haven't yet been
applied to the buffers themselves.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Marshall <marshall@zed.dev>
This PR removes the `replica_id` field from the `MultiBuffer` struct.
We were only ever referencing this field to pass when constructing a
`MultiBuffer`, and never used it outside of that.
Release Notes:
- N/A
Release Notes:
- Added a new `assistant.inline_alternatives` setting to configure
additional models that will be used to perform inline assists in
parallel.
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Roy <roy@anthropic.com>
Co-authored-by: Adam <wolffiex@anthropic.com>
This PR makes the `Buffer::apply_ops` method infallible for
`text::Buffer` and `language::Buffer`.
We discovered that `text::Buffer::apply_ops` was only fallible due to
`apply_undo`, which didn't actually need to be fallible.
Release Notes:
- N/A
This lets us provide a context when constructing the zero value. We need
it so we can require anchors to be associated with a buffer id, which
we're doing as part of simplifying the multibuffer API.
Release Notes:
- N/A
Co-authored-by: Nathan <nathan@zed.dev>
