Release Notes:
- Adds support for `:[range]w {file}`
- This writes the lines in the range to the specified
- Adds support for `:[range]w`
- This replaces the current file with the selected lines
- Introduce a `default_range` field to `VimCommand`, to be optionally
used when no range is specified for the command
- Update `VimCommand.parse` to take into consideration the
`default_range`
- Introduce `CommandRange::buffer` to obtain the `CommandRange` which
corresponds to the whole buffer
- Update the `VimCommand` definitions for both `sort` and `sort i` to
default to the whole buffer when no range is specified
Closes#41750
Release Notes:
- Improved vim's `:sort` command to sort the buffer's content when no
selection is used
Prior to this change we would always resolve envs when spawning a new
terminal window based on the inherited CLI environment. This works fine
as long as we open a new Zed instance in the terminal when using it
locally only. When using Zed connected to a remote server, it would not
be meaningful however. WIth this change, we correctly ping the remote
for the project-local envs and use that instead. This change should also
fix a pesky issue when updating Zed - after Zed restarts, opening a new
terminal window will not run `direnv` for example.
Release Notes:
- N/A
Re-applies https://github.com/zed-industries/zed/pull/30840
This PR re-applies the initial
[PR](https://github.com/zed-industries/zed/pull/30840). As it was closed
because it was hard to land, because of the many conflicts. This PR
re-applies the changes for it.
In several cases we were creating multiple display_map
snapshots within the same root-level function call.
Creating a display_map snapshot is quite slow, and in some
cases we were creating the snapshot multiple times.
Release Notes:
- N/A
We have unnecessary clones for the fields here as most of the snapshots
contain the others hierarchically.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Update the list of supported options in vim mode so that the following
are now available:
- `:set ignorecase`
- `:set noignorecase`
- `:set ic`
- `:set noic`
This controls whether the case-sensitive search option is disabled or
enabled when using the buffer and project searches, with `ignorecase`
disabling the search option and `noignorecase` enabling it.
Release Notes:
- Added support for `:set ignorecase` and `:set noignorecase` in vim
mode
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
std commands can block for an arbitrary duration and so runs risk of
blocking tasks for too long. This replaces all such uses where sensible
with async processes.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Closes https://github.com/zed-industries/zed/issues/38690Closes#37353
### Background
On Windows, paths are normally separated by `\`, unlike mac and linux
where they are separated by `/`. When editing code in a project that
uses a different path style than your local system (e.g. remoting from
Windows to Linux, using WSL, and collaboration between windows and unix
users), the correct separator for a path may differ from the "native"
separator.
Previously, to work around this, Zed converted paths' separators in
numerous places. This was applied to both absolute and relative paths,
leading to incorrect conversions in some cases.
### Solution
Many code paths in Zed use paths that are *relative* to either a
worktree root or a git repository. This PR introduces a dedicated type
for these paths called `RelPath`, which stores the path in the same way
regardless of host platform, and offers `Path`-like manipulation APIs.
RelPath supports *displaying* the path using either separator, so that
we can display paths in a style that is determined at runtime based on
the current project.
The representation of absolute paths is left untouched, for now.
Absolute paths are different from relative paths because (except in
contexts where we know that the path refers to the local filesystem)
they should generally be treated as opaque strings. Currently we use a
mix of types for these paths (std::path::Path, String, SanitizedPath).
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Peter Tripp <petertripp@gmail.com>
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
Co-authored-by: Lukas Wirth <me@lukaswirth.dev>
Closes#36109
Adds an additional option to `search` and `update_matches` to specify
whether the update should affect the search history.
Release Notes:
- Fix navigating buffer search history
At RustConf we were demo'ing zed, and it continually popped open the
chat panel.
We're usually inured to this because the Chat panel doesn't open unless
a Guest
is in the channel, but it made me sad that we were showing a long stream
of
vacuous comments and unresponded to questions on every demo screen.
We may bring chat back in the future, but we need more thought on the
UX, and
we need to rebuild the backend to not use the existing collab server
that we're
trying to move off of.
Release Notes:
- Removed the chat feature from Zed (Sorry to the 5 of you who use this
on the regular!)
Co-Authored-By: Brandan <b5@n0.computer>
Release Notes:
- Added a new action `terminal::Toggle` that is by default bound to
'ctrl-\`'. This copies the default behaviour from VSCode and Jetbrains
where the terminal opens and closes correctly. If you'd like the old
behaviour you can rebind 'ctrl-\`' to `terminal::ToggleFocus`
Co-authored-by: Brandan <b5@n0.computer>
This is a pure refactor that consolidates all SSH remoting logic such
that it should be straightforward to add another transport to the
remoting system.
Release Notes:
- N/A
---------
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
This removes around 900 unnecessary clones, ranging from cloning a few
ints all the way to large data structures and images.
A lot of these were fixed using `cargo clippy --fix --workspace
--all-targets`, however it often breaks other lints and needs to be run
again. This was then followed up with some manual fixing.
I understand this is a large diff, but all the changes are pretty
trivial. Rust is doing some heavy lifting here for us. Once I get it up
to speed with main, I'd appreciate this getting merged rather sooner
than later.
Release Notes:
- N/A
Update both `:tabedit` and `:tabnew` commands in order to support a
single argument, a filename, that, when provided, ensures that the new
tab either opens an existing file or associates the new tab with the
filename, so that when saving the buffer's content, the file is created.
Relates to #21112
Release Notes:
- vim: Added support for filenames in both `:tabnew` and `:tabedit` commands
Closes#21198
Release Notes:
- Adds support for `:norm`
- Allows for vim and zed style modified keys specified in issue
- Vim style <C-w> and zed style <ctrl-w>
- Differs from vim in how multi-line is handled
- vim is sequential
- zed is combinational (with multi-cursor)
This is following feedback from folks that were searching the "close
others" action, available in the tab's context menu, and not finding it
because it was actually named "close inactive", which was confusing. So,
this PR makes sure the tab's menu item and the action have consistent
naming.
Release Notes:
- Rename "CloseInactiveItems" action to "CloseOtherItems" for naming
consistency.
This PR adds a `severity` argument so severity can be defined when
navigating through diagnostics. This allows keybinds like the following:
```json
{
"] e": ["editor::GoToDiagnostic", { "severity": "error" }],
"[ e": ["editor::GoToDiagnostic", { "severity": "error" }]
}
```
I've added test comments and a test. Let me know if there's anything
else you need!
Release Notes:
- Add `severity` argument to `editor::GoToDiagnostic`,
`editor::GoToPreviousDiagnostic`, `project_panel::SelectNextDiagnostic`
and `project_panel::SelectPrevDiagnostic` actions
There were a couple of things preventing this from working:
- our hack to stop the node REPL from appearing broke in recent versions
of the JS DAP that started passing `--experimental-network-inspection`
by default
- we had lost the ability to create a debug terminal without specifying
a program
This PR fixes those issues. We also fixed environment variables from the
**runInTerminal** request not getting passed to the spawned program.
Release Notes:
- Debugger: Fix RunInTerminal not working for JavaScript debugger.
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Closes #ISSUE
Adds a new `documentation` method to actions, that is extracted from doc
comments when using the `actions!` or derive macros.
Additionally, this PR adds doc comments to as many action definitions in
Zed as possible.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
In #32656 I generalized the argument to change selections to allow
controling both the scroll and the nav history (and the completion
trigger).
To avoid conflicting with ongoing debugger cherry-picks I left the
argument as an `impl Into<>`, but I think it's clearer to make callers
specify what they want here.
I converted a lot of `None` arguments to `SelectionEffects::no_scroll()`
to be exactly compatible; but I think many people used none as an "i
don't care" value in which case Default::default() might be more
appropraite
Closes #ISSUE
Release Notes:
- N/A
In #32656 I generalized the argument to change selections to allow
controling both the scroll and the nav history (and the completion
trigger).
To avoid conflicting with ongoing debugger cherry-picks I left the
argument as an `impl Into<>`, but I think it's clearer to make callers
specify what they want here.
I converted a lot of `None` arguments to `SelectionEffects::no_scroll()`
to be exactly compatible; but I think many people used none as an "i
don't care" value in which case Default::default() might be more
appropraite
Instead of a menagerie of macros for implementing `Action`, now there
are just two:
* `actions!(editor, [MoveLeft, MoveRight])`
* `#[derive(..., Action)]` with `#[action(namespace = editor)]`
In both contexts, `///` doc comments can be provided and will be used in
`JsonSchema`.
In both contexts, parameters can provided in `#[action(...)]`:
- `namespace = some_namespace` sets the namespace. In Zed this is
required.
- `name = "ActionName"` overrides the action's name. This must not
contain "::".
- `no_json` causes the `build` method to always error and
`action_json_schema` to return `None`
and allows actions not implement `serde::Serialize` and
`schemars::JsonSchema`.
- `no_register` skips registering the action. This is useful for
implementing the `Action` trait
while not supporting invocation by name or JSON deserialization.
- `deprecated_aliases = ["editor::SomeAction"]` specifies deprecated old
names for the action.
These action names should *not* correspond to any actions that are
registered. These old names
can then still be used to refer to invoke this action. In Zed, the
keymap JSON schema will
accept these old names and provide warnings.
- `deprecated = "Message about why this action is deprecation"`
specifies a deprecation message.
In Zed, the keymap JSON schema will cause this to be displayed as a
warning. This is a new feature.
Also makes the following changes since this seems like a good time to
make breaking changes:
* In `zed.rs` tests adds a test with an explicit list of namespaces. The
rationale for this is that there is otherwise no checking of `namespace
= ...` attributes.
* `Action::debug_name` renamed to `name_for_type`, since its only
difference with `name` was that it
* `Action::name` now returns `&'static str` instead of `&str` to match
the return of `name_for_type`. This makes the action trait more limited,
but the code was already assuming that `name_for_type` is the same as
`name`, and it requires `&'static`. So really this just makes the trait
harder to misuse.
* Various action reflection methods now use `&'static str` instead of
`SharedString`.
Release Notes:
- N/A
https://github.com/zed-industries/zed/issues/30972 brought up another
case where our context is not enough to track the actual source of the
issue: we get a general top-level error without inner error.
The reason for this was `.ok_or_else(|| anyhow!("failed to read HEAD
SHA"))?; ` on the top level.
The PR finally reworks the way we use anyhow to reduce such issues (or
at least make it simpler to bubble them up later in a fix).
On top of that, uses a few more anyhow methods for better readability.
* `.ok_or_else(|| anyhow!("..."))`, `map_err` and other similar error
conversion/option reporting cases are replaced with `context` and
`with_context` calls
* in addition to that, various `anyhow!("failed to do ...")` are
stripped with `.context("Doing ...")` messages instead to remove the
parasitic `failed to` text
* `anyhow::ensure!` is used instead of `if ... { return Err(...); }`
calls
* `anyhow::bail!` is used instead of `return Err(anyhow!(...));`
Release Notes:
- N/A
@jyn514 mentioned that this would be nice to have while trying out zed,
and it seemed simple enough so I added it.
Release Notes:
- Added `OpenDocs` action to open Zed's docs in a browser, aliased to
`:h[elp]` in vim.
Closes #ISSUE
Release Notes:
- Agent Beta: Renamed the top-level `assistant` settings key to `agent`.
A migration for existing settings files is included.
- Agent Beta: Moved the `assistant::ToggleFocus`,
`assistant::ToggleModelSelector`, and `assistant::OpenRulesLibrary`
actions to the `agent` namespace. Existing keymaps that mention these
actions by their old names will continue to work.
---------
Co-authored-by: Max <max@zed.dev>
resolves#24655resolves#23945
I haven't yet added a default binding for the new command. #27797 added `:ls` and
`:buffers` which in my opinion should use the global searchable version
given that that matches the vim semantics of those commands better than
just showing the tabs in the local pane.
There's also a question of what to do when you select a tab from another
pane, should the focus jump to that pane or should that tab move to the
currently focused pane? For now I've implemented the former.
Release Notes:
- Added `tab_switcher::ToggleAll` to search open tabs from all panes and focus the selected one.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
TODO:
- [x] Make it work in the project diff:
- [x] Support non-singleton buffers
- [x] Adjust excerpt boundaries to show full conflicts
- [x] Write tests for conflict-related events and state management
- [x] Prevent hunk buttons from appearing inside conflicts
- [x] Make sure it works over SSH, collab
- [x] Allow separate theming of markers
Bonus:
- [ ] Count of conflicts in toolbar
- [ ] Keyboard-driven navigation and resolution
- [ ] ~~Inlay hints to contextualize "ours"/"theirs"~~
Release Notes:
- Implemented initial support for resolving merge conflicts.
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Split `locator` out of DebugTaskDefinition to make it clearer when
location needs to happen.
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Co-authored-by: Cole Miller <m@cole-miller.net>
For some reason `SIGTTIN` sometimes gets sent to the process group,
causing it to stop when run from a terminal. This solves that issue by
putting the shell in a new session + progress group.
This allows removal of a workaround of using `exit 0;` to restore
handling of ctrl-c after exit. In testing this appears to no longer be
necessary.
Closes#27716
Release Notes:
- Fixed Zed sometimes becoming a stopped background process when run
from a terminal.
