Fixes a regression introduced in
https://github.com/zed-industries/zed/pull/39857. As for the exact
reason this causes this issue I am not yet sure will investigate (as per
the todos in code)
Fixes ZED-23R
Release Notes:
- N/A *or* Added/Fixed/Improved ...
This PR does two related things:
- First, it gets rid of the undifferentiated `RepositoryEvent::Updated`
in favor of three new events that have clearer definitions:
`BranchChanged`, `StashEntriesChanged`, and `StatusesChanged`. An
implication of this is that we no longer emit a `RepositoryEvent` unless
some git state changed; previously we would emit `RepositoryUpdated`
after doing a git status scan even if no statuses changed.
- Second, it changes the subscription strategy of the project diff to
make it update more robustly. Previously, the project diff only
subscribed to the `GitStore`, so it relied on getting a `GitStoreEvent`
when some buffer's diff hunks changed, even if the git status of the
buffer's file didn't change (e.g. a second hunk in a file that was
already modified). After this PR, it also subscribes to the individual
`BufferDiff` entities for buffers that have a git status, so the
`GitStore` is freed from that responsibility. This also fixes some real
cases where the previous strategy was not effective in keeping the
project diff up to date (captured in a test).
Release Notes:
- Fixed some cases where the project diff would fail to update in
response to git events.
This simplifies some code and is also more correct in some others (I
believe some of these might've overflowed causing panics in sentry)
Release Notes:
- N/A *or* Added/Fixed/Improved ...
In an attempt to figure out what's wrong with `point_to_buffer_offset`
for crash https://github.com/zed-industries/zed/issues/40453. We want to
know which branch among these two is the bad one.
Release Notes:
- N/A
Co-authored-by: Lukas Wirth <lukas@zed.dev>
Reduces peak stack usage in these functions and should generally be a
bit performant.
Display map benchmark results
```
To tab point/to_tab_point/1024
time: [531.40 ns 532.10 ns 532.97 ns]
change: [-2.1824% -2.0054% -1.8125%] (p = 0.00 < 0.05)
Performance has improved.
Found 1 outliers among 100 measurements (1.00%)
1 (1.00%) high severe
To fold point/to_fold_point/1024
time: [530.81 ns 531.30 ns 531.80 ns]
change: [-2.0295% -1.9054% -1.7716%] (p = 0.00 < 0.05)
Performance has improved.
Found 3 outliers among 100 measurements (3.00%)
2 (2.00%) high mild
1 (1.00%) high severe
```
Release Notes:
- N/A *or* Added/Fixed/Improved ...
- Notable change is the use of a newtype for `ReplicaId`
- Fixes `WorktreeStore::create_remote_worktree` creating a remote
worktree with the local replica id, though this is not currently used
- Fixes observing the `Agent` (that is following the agent) causing
global clocks to allocate 65535 elements
- Shrinks the size of `Global` a bit. In a local or non-collab remote
session it won't ever allocate still.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
We've been considering removing workspace-hack for a couple reasons:
- Lukas ran into a situation where its build script seemed to be causing
spurious rebuilds. This seems more likely to be a cargo bug than an
issue with workspace-hack itself (given that it has an empty build
script), but we don't necessarily want to take the time to hunt that
down right now.
- Marshall mentioned hakari interacts poorly with automated crate
updates (in our case provided by rennovate) because you'd need to have
`cargo hakari generate && cargo hakari manage-deps` after their changes
and we prefer to not have actions that make commits.
Currently removing workspace-hack causes our workspace to grow from
~1700 to ~2000 crates being built (depending on platform), which is
mainly a problem when you're building the whole workspace or running
tests across the the normal and remote binaries (which is where
feature-unification nets us the most sharing). It doesn't impact
incremental times noticeably when you're just iterating on `-p zed`, and
we'll hopefully get these savings back in the future when
rust-lang/cargo#14774 (which re-implements the functionality of hakari)
is finished.
Release Notes:
- N/A
`MultiBuffer::anchor_in_excerpt` currently just wraps the given text
anchor in a multibuffer anchor. This allows one to get a multibuffer
anchor that points outside its excerpt which is basically never what one
wants. This PR now does a bounds check and returns `None` if the given
text anchor is not within the bounds of the excerpt.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Fixes the `Open Diff` action for untracked files when the `sort_by_path`
setting is enabled. The `ProjectDiff` wasn't correctly moving the
multibuffer's cursor to the untracked file because, when that setting is
enabled, it's sort prefix is changed to the tracked files sort prefix, and that
wasn't accounted for in `move_to_entry`.
Before these changes, the `sort_prefix` field for `PathKey` was called `namespace`, it was renamed to be clearer what its purpose is.
Closes#39529
Release Notes:
- Fixed 'Open Diff' action for untracked files when `sort_by_path` is
enabled
---------
Co-authored-by: David Kleingeld <davidsk@zed.dev>
This takes the idea that @RemcoSmitsDev started on in
https://github.com/zed-industries/zed/pull/39354. We did away with
grabbing a snapshot of the display map when buffer coordinates were
sufficient.
Closes#37267
Release Notes:
- Reduced micro-stutters in project search with large multi-buffer
contents.
---------
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
The ordering of path-based excerpts in multibuffers regressed with
#38744, because we changed the `path` field of `PathKey` to be a string
(from `std::path::Path`) and used the derived `Ord` implementation,
which doesn't agree with the path-based order of worktree traversals.
This PR fixes that by using `RelPath` for `PathKey`. Instead of using
`File::full_path`, which can be absolute, we always use `File::path` and
distinguish different worktrees using their ID.
Release Notes:
- N/A
---------
Co-authored-by: Lukas Wirth <me@lukaswirth.dev>
This removes a hack from `MultiBuffer::anchor_at` that works around
missing logic for handling `ExcerptId::max()` by implementing that said
missing logic.
Generally, `ExcerptId::min()` is already being handled correctly due to
how `Cursor` seeking works, we tend to seek to or beyond a seek target,
meaning `min` will always match the first excerpt as expected. `max` on
the other hand will always seek beyond the last excerpt resulting in no
excerpt being found, so any code path dealing with the excerpt sumtree
will have to specially check for this special excerpt ID to work
correctly.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Closes https://github.com/zed-industries/zed/issues/38690Closes#37353
### Background
On Windows, paths are normally separated by `\`, unlike mac and linux
where they are separated by `/`. When editing code in a project that
uses a different path style than your local system (e.g. remoting from
Windows to Linux, using WSL, and collaboration between windows and unix
users), the correct separator for a path may differ from the "native"
separator.
Previously, to work around this, Zed converted paths' separators in
numerous places. This was applied to both absolute and relative paths,
leading to incorrect conversions in some cases.
### Solution
Many code paths in Zed use paths that are *relative* to either a
worktree root or a git repository. This PR introduces a dedicated type
for these paths called `RelPath`, which stores the path in the same way
regardless of host platform, and offers `Path`-like manipulation APIs.
RelPath supports *displaying* the path using either separator, so that
we can display paths in a style that is determined at runtime based on
the current project.
The representation of absolute paths is left untouched, for now.
Absolute paths are different from relative paths because (except in
contexts where we know that the path refers to the local filesystem)
they should generally be treated as opaque strings. Currently we use a
mix of types for these paths (std::path::Path, String, SanitizedPath).
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Peter Tripp <petertripp@gmail.com>
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
Co-authored-by: Lukas Wirth <me@lukaswirth.dev>
Co-Authored-By: Ben K <ben@zed.dev>
Co-Authored-By: Anthony <anthony@zed.dev>
Co-Authored-By: Mikayla <mikayla@zed.dev>
Release Notes:
- settings: Major internal changes to settings. The primary user-facing
effect is that some settings which did not make sense in project
settings files are no-longer read from there. (For example the inline
blame settings)
---------
Co-authored-by: Ben Kunkle <ben@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
Co-authored-by: Anthony <anthony@zed.dev>
This allows you to write `buffer_snapshot.debug(ranges, value)` and it
will be displayed in the buffer (or multibuffer!) until that callsite
runs again. `ranges` can be any position (`usize`, `Anchor`, etc), any
range, or a slice or vec of those. `value` just needs a `Debug` impl.
These are stored in a mutable global for convenience, and this is only
available in debug builds.
For example, using this to visualize the captures of the brackets
Tree-sitter query:
<img width="1215" height="480" alt="image"
src="https://github.com/user-attachments/assets/c1878fc7-f6b3-4e27-949e-ecf67a7906b9"
/>
Release Notes:
- N/A
A very primitive attempt, we just key the editor with the locations and
re-use the editor if we open a new buffer with the same initial
locations and title.
Release Notes:
- Added reusing of reference search buffers when applicable
