Hopefully, this will make the install/configure/uninstall buttons in the
right stand out a bit more and make their presence a bit more obvious
for newcomers.
| Before | After |
|--------|--------|
| <img width="1938" height="1276" alt="Screenshot 2025-10-21 at 10
58@2x"
src="https://github.com/user-attachments/assets/b76115e1-0be2-4d5b-a677-525663d86c7c"
/> | <img width="1938" height="1276" alt="Screenshot 2025-10-21 at 10
53@2x"
src="https://github.com/user-attachments/assets/9e563b71-b11a-4b69-b687-c0b469ca4eec"
/> |
Release Notes:
- Increased affordance of the download button in each extension card in
the extensions page.
We've been considering removing workspace-hack for a couple reasons:
- Lukas ran into a situation where its build script seemed to be causing
spurious rebuilds. This seems more likely to be a cargo bug than an
issue with workspace-hack itself (given that it has an empty build
script), but we don't necessarily want to take the time to hunt that
down right now.
- Marshall mentioned hakari interacts poorly with automated crate
updates (in our case provided by rennovate) because you'd need to have
`cargo hakari generate && cargo hakari manage-deps` after their changes
and we prefer to not have actions that make commits.
Currently removing workspace-hack causes our workspace to grow from
~1700 to ~2000 crates being built (depending on platform), which is
mainly a problem when you're building the whole workspace or running
tests across the the normal and remote binaries (which is where
feature-unification nets us the most sharing). It doesn't impact
incremental times noticeably when you're just iterating on `-p zed`, and
we'll hopefully get these savings back in the future when
rust-lang/cargo#14774 (which re-implements the functionality of hakari)
is finished.
Release Notes:
- N/A
Prior we only logged the crate in `log_err`, which is not too helpful.
We now assemble the module path from the file system path.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Closes https://github.com/zed-industries/zed/issues/38690Closes#37353
### Background
On Windows, paths are normally separated by `\`, unlike mac and linux
where they are separated by `/`. When editing code in a project that
uses a different path style than your local system (e.g. remoting from
Windows to Linux, using WSL, and collaboration between windows and unix
users), the correct separator for a path may differ from the "native"
separator.
Previously, to work around this, Zed converted paths' separators in
numerous places. This was applied to both absolute and relative paths,
leading to incorrect conversions in some cases.
### Solution
Many code paths in Zed use paths that are *relative* to either a
worktree root or a git repository. This PR introduces a dedicated type
for these paths called `RelPath`, which stores the path in the same way
regardless of host platform, and offers `Path`-like manipulation APIs.
RelPath supports *displaying* the path using either separator, so that
we can display paths in a style that is determined at runtime based on
the current project.
The representation of absolute paths is left untouched, for now.
Absolute paths are different from relative paths because (except in
contexts where we know that the path refers to the local filesystem)
they should generally be treated as opaque strings. Currently we use a
mix of types for these paths (std::path::Path, String, SanitizedPath).
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Peter Tripp <petertripp@gmail.com>
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
Co-authored-by: Lukas Wirth <me@lukaswirth.dev>
Co-Authored-By: Ben K <ben@zed.dev>
Co-Authored-By: Anthony <anthony@zed.dev>
Co-Authored-By: Mikayla <mikayla@zed.dev>
Release Notes:
- settings: Major internal changes to settings. The primary user-facing
effect is that some settings which did not make sense in project
settings files are no-longer read from there. (For example the inline
blame settings)
---------
Co-authored-by: Ben Kunkle <ben@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
Co-authored-by: Anthony <anthony@zed.dev>
Closes https://github.com/zed-industries/zed/issues/37621
Improves https://github.com/zed-industries/zed/issues/24623
Adding scrollbars withing Zed's UI currently is rather cumbersome, as it
requires the copying of a lot of code in order for these to work. Wiring
up settings for scrollbar visibilty always has to be done at the call
site and the state has to be saved and maintained by the caller as well.
Similarly, reserving space has to also be handled by the caller.
This PR changes the way scrollbars work in Zed fundamentally by making
use of the new `use_keyed_state` APIs: Instead of saving the state at
the call site, the window now keeps track of the state corresponding to
scrollbars. This enables us to add scrollbars with e.g. one simple call
on divs:
```rust
div()
.vertical_scrollbar(window, cx)
```
will add a scrollbar to the corresponding container. There are some more
improvements regarding tracking of scrollbar visibility settings (which
is now handled by a trait for each setting that supports this) as well
as reserving space.
Additionally, all needed stuff for layouting, catching events and
reserving space is also now managed by the scrollbar component instead.
This drastically reduces the amount of event listeners and makes
layouting of two scrollbars easier.
Furthermore, this paves the way for more improvements to scrollbars,
such as graceful auto-hide. Only downsight here is that we lose some
customizability in a few areas. However, once this lands, we gain the
ability to quickly follow these up without breaking stuff elsewhere.
This also already fixes a few bugs:
- Scrollbars no longer flicker on first render.
- Auto-hide now properly works for all scrollbars.
- If the content size changes, the scrollbar is updated on the same
frame. Both of these happened because we were computing the scrollbar
sizes too early, causing us to use the sizes from the previous frame or
unitialized sizes.
- The project panel no longer jumps if scrolled all the way to the
bottom and the scrollbar actually auto-hides.
Still TODO:
- [x] Fix scrolling in the debugger memory view
- [x] Clean up some more in the scrollbar component and reduce clones
there
- [x] Ensure we don't over-notify the entity the scrollbar is rendered
within
- [x] Make sure auto-hide properly works for all cases
- [x] Check whether we want to implement the scrollbar trait for
`UniformList`s as well
- ~~ [ ] Use for uniformlist where possible~~ Postponed
- [x] Improve layout for cases where we render both scrollbars.
Release Notes:
- N/A
Closes#37617
We're already using `get` in a bunch of places, this PR updates the
remaining spots to follow the same pattern. Note that the `ix` we read
in `render_match` can sometimes be stale.
The likely reason is that we run the match-update logic asynchronously
(see
[here](138117e0b1/crates/picker/src/picker.rs (L643))).
That means it's possible to render items after the list's [data
update](138117e0b1/crates/picker/src/picker.rs (L652))
but before the [list
reset](138117e0b1/crates/picker/src/picker.rs (L662)),
in which case the `ix` can be greater than that of our updated data.
Release Notes:
- Fixed crash when filtering MCP tools.
This PR separates out the associated constant `KEY` from the `Settings`
trait into a new trait `SettingsKey`. This allows for the key trait to
be derived using attributes to specify the path so that the new
`SettingsUi` derive macro can use the same attributes to determine top
level settings paths thereby removing the need to duplicate the path in
both `Settings::KEY` and `#[settings_ui(path = "...")]`
Co-authored-by: Ben Kunkle <ben@zed.dev>
Release Notes:
- N/A
---------
Co-authored-by: Ben Kunkle <ben@zed.dev>
This removes around 900 unnecessary clones, ranging from cloning a few
ints all the way to large data structures and images.
A lot of these were fixed using `cargo clippy --fix --workspace
--all-targets`, however it often breaks other lints and needs to be run
again. This was then followed up with some manual fixing.
I understand this is a large diff, but all the changes are pretty
trivial. Rust is doing some heavy lifting here for us. Once I get it up
to speed with main, I'd appreciate this getting merged rather sooner
than later.
Release Notes:
- N/A
This PR hides "slash commands" and "indexed docs providers" from the
extensions UI as these are virtually completely unused types of
extensions.
Release Notes:
- N/A
Closes #ISSUE
Adds a new `documentation` method to actions, that is extracted from doc
comments when using the `actions!` or derive macros.
Additionally, this PR adds doc comments to as many action definitions in
Zed as possible.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Still a work in progress! Todos before merging:
- [x] Allow to delete (not just turn off) an MCP server from the panel's
settings view
- [x] Also uninstall the extension upon deleting the server (check if
the extension just provides MCPs)
- [x] Resolve repository URL again
- [x] Add a button to open the configuration modal from the panel's
settings view
- [x] Improve modal UX to install and configure a non-extension MCP
Release Notes:
- N/A
---------
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
Co-authored-by: Ben Brandt <benjamin.j.brandt@gmail.com>
This PR also introduces `Context::processor`, a sibling of
`Context::listener` that takes a strong pointer to entity and allows for
a return result.
Release Notes:
- N/A
Co-authored-by: Mikayla <mikayla@zed.dev>
We were previously displaying this modal in all open Zed windows if
triggered. That was a bit annoying because I had to go to each window
individually to close it, which meant doing it multiple times. 😅
Release Notes:
- agent: Fixed the MCP configuration modal to show only in the active
window.
This method was added in #20649 to be an alternative of `occlude` which
allows scroll events. It seems a bit arbitrary to only stop left mouse
downs, so this seems like it's probably an improvement.
Release Notes:
- N/A
resolves#24655resolves#23945
I haven't yet added a default binding for the new command. #27797 added `:ls` and
`:buffers` which in my opinion should use the global searchable version
given that that matches the vim semantics of those commands better than
just showing the tabs in the local pane.
There's also a question of what to do when you select a tab from another
pane, should the focus jump to that pane or should that tab move to the
currently focused pane? For now I've implemented the former.
Release Notes:
- Added `tab_switcher::ToggleAll` to search open tabs from all panes and focus the selected one.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This adds a "workspace-hack" crate, see
[mozilla's](https://hg.mozilla.org/mozilla-central/file/3a265fdc9f33e5946f0ca0a04af73acd7e6d1a39/build/workspace-hack/Cargo.toml#l7)
for a concise explanation of why this is useful. For us in practice this
means that if I were to run all the tests (`cargo nextest r
--workspace`) and then `cargo r`, all the deps from the previous cargo
command will be reused. Before this PR it would rebuild many deps due to
resolving different sets of features for them. For me this frequently
caused long rebuilds when things "should" already be cached.
To avoid manually maintaining our workspace-hack crate, we will use
[cargo hakari](https://docs.rs/cargo-hakari) to update the build files
when there's a necessary change. I've added a step to CI that checks
whether the workspace-hack crate is up to date, and instructs you to
re-run `script/update-workspace-hack` when it fails.
Finally, to make sure that people can still depend on crates in our
workspace without pulling in all the workspace deps, we use a `[patch]`
section following [hakari's
instructions](https://docs.rs/cargo-hakari/0.9.36/cargo_hakari/patch_directive/index.html)
One possible followup task would be making guppy use our
`rust-toolchain.toml` instead of having to duplicate that list in its
config, I opened an issue for that upstream: guppy-rs/guppy#481.
TODO:
- [x] Fix the extension test failure
- [x] Ensure the dev dependencies aren't being unified by Hakari into
the main dependencies
- [x] Ensure that the remote-server binary continues to not depend on
LibSSL
Release Notes:
- N/A
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
This PR adds the ability to open the extensions view via the `zed:
extensions` action with a pre-selected filter.
The "Install Themes" and "Install Icon Themes" buttons in their
respective selectors take advantage of this to set the filter when
opening the view:
https://github.com/user-attachments/assets/2e345c0f-418a-47b6-811e-cabae6c616d1
Release Notes:
- N/A
This is the core change:
https://github.com/zed-industries/zed/pull/26758/files#diff-044302c0d57147af17e68a0009fee3e8dcdfb4f32c27a915e70cfa80e987f765R1052
TODO:
- [x] Use AsyncFn instead of Fn() -> Future in GPUI spawn methods
- [x] Implement it in the whole app
- [x] Implement it in the debugger
- [x] Glance at the RPC crate, and see if those box future methods can
be switched over. Answer: It can't directly, as you can't make an
AsyncFn* into a trait object. There's ways around that, but they're all
more complex than just keeping the code as is.
- [ ] Fix platform specific code
Release Notes:
- N/A
Because of #26562, it is now possible to subscribe to extension update
events within the LSP store, where we can then update the Schemas sent
to the JSON LSP resulting in dynamic updates to the auto-complete
suggestions and diagnostics in settings. Notably, this means newly
installed languages and (icon) themes will auto-complete correctly as
soon as the extension is installed.
Closes#15436
Release Notes:
- Fixed an issue where autocomplete suggestions and diagnostics for
languages and (icon) themes in settings would not update when the
extension with which they were added was installed or uninstalled
This PR adds a new `ExtensionEvents` event bus that can be used to
listen for extension-related events throughout the app.
Today you need to have a handle to the `ExtensionStore` (which entails
depending on `extension_host`) in order to listen for extension events.
With this change subscribers only need to depend on `extension`, which
has a leaner dependency graph.
Release Notes:
- N/A
