These changes refactor the whitespace handling logic for Vim's change
surrounds command (`cs`), making its behavior closely match
[tpope/vim-surround](https://github.com/tpope/vim-surround), following
[this
discussion](https://github.com/zed-industries/zed/issues/38169#issuecomment-3304129461).
Zed's current implementation has two main differences when compared to
[tpope/vim-surround](https://github.com/tpope/vim-surround):
- It only considers whether a single space should be added or removed,
instead of all the space that is between the surrounding character and
the content
- It only takes into consideration the new surrounding characters in
order to determine whether to add or remove that space
A review of
[tpope/vim-surround](https://github.com/tpope/vim-surround)'s behavior
reveals these rules for whitespace:
* Quote to Quote
* Whitespace is never changed
* Quote to Bracket
* If opening bracket, add one space
* If closing bracket, do not add space
* Bracket to Bracket
* If opening to opening, keep only one space
* If opening to closing, remove all space
* If closing to opening, add one space
* If closing to closing, do not change space
* Bracket to Quote
* If opening, remove all space
* If closing, preserve all space
Below is a table with examples for each scenario. A new test has also
been added to specifically check the scenarios outlined above,
`vim::surrounds::test::test_change_surrounds_vim`.
| Type | Before | Command | After |
|-------------------|-------------|---------|---------------|
| Quote → Quote | `' a '` | `cs'"` | `" a "` |
| Quote → Quote | `" a "` | `cs"'` | `' a '` |
| Quote → Bracket | `' a '` | `cs'{` | `{ a }` |
| Quote → Bracket | `' a '` | `cs'}` | `{ a }` |
| Bracket → Bracket | `[ a ]` | `cs[{` | `{ a }` |
| Bracket → Bracket | `[ a ]` | `cs[}` | `{a}` |
| Bracket → Bracket | `[ a ]` | `cs]{` | `{ a }` |
| Bracket → Bracket | `[ a ]` | `cs]}` | `{ a }` |
| Bracket → Quote | `[ a ]` | `cs['` | `'a'` |
| Bracket → Quote | `[ a ]` | `cs]'` | `' a '` |
These changes diverge from
[tpope/vim-surround](https://github.com/tpope/vim-surround) when
handling newlines. For example, with the following snippet:
```rust
fn test_surround() {
if 2 > 1 {
println!("place cursor here");
}
};
```
Placing the cursor inside the string and running any combination of
`cs{[`, `cs{]`, `cs}[`, or `cs}]` would previously remove newline
characters. With these changes, using commands like `cs}]` will now
preserve newlines.
Related to #38169Closes#39334
Release Notes:
- Improved Vim’s change surround command to closely match
[tpope/vim-surround](https://github.com/tpope/vim-surround) behavior.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes #ISSUE
From notes:
```markdown
- [x] Clicking on the disclsoure icon button in the root-level tree view item should steal focus and move it to the root item (not the icon button)
- [x] [@ben] Allow left/right arrow keys to expand/collapse root tree view items in the nav
- [x] With this, make enter/space work the same as clicking (activate page, don't expand root items, focus moves to the content and leaves nav — becomes consistent with mouse interaction)
- [x] Smart cmd-shift-e: toggling focus should take you to the selected item
- [x] [@ben] pageup + pagedown in nav -> jump between root items
- [x] [@ben] home + end buttons should work
- in nav:
- home always goes to first section header
- end always goes to last _visible_ item (does not expand)
```
Release Notes:
- N/A *or* Added/Fixed/Improved ...
## Description
Fixes#39376
Add individual FoldAtLevel1-9 actions so users can find fold commands in
the command palette while keeping existing keybindings.
Migrating user keymaps is necessary to have the keybinds show in the command palette.
Closes#39376
### Changes
- `crates/editor/src/actions.rs` - Added FoldAtLevel1-9 action structs
- `crates/editor/src/editor.rs` - Implemented fold_at_level_1-9 handler
methods
- `crates/editor/src/element.rs` - Registered new actions
- `assets/keymaps/*.json` - Updated keybindings to use new individual
actions
### Other Approaches considered
- Adding #[serde(default)] to existing FoldAtLevel(u32) - wouldn't make
it discoverable
- Creating a single action with enumerated variants - idk about this
that well.
### Release Notes
Release Notes:
- Added Fold At Level 1-9 actions to the command palette
---------
Co-authored-by: HactarCE <6060305+HactarCE@users.noreply.github.com>
Despite how great `cmd-d` as a keybinding is, that was not working as it
was conflicting with an editor keybinding:
https://github.com/user-attachments/assets/2ea8665b-7008-4f0a-9426-8d31d379ee1c
This PR changes it to `cmd-alt-z`, which is the best "remove/fix"-type
of keybinding I could find that doesn't conflict with anything else.
Ideally, we'd use either the D, N, or R letters for "deny", "no", and
"reject", but unfortunately, none of them are nicely available in this
context...
Release Notes:
- agent: Fix keybinding to deny running a command
Closes#10930Closes#11353
Release Notes:
- Adds commands to project_panel
- `ctrl-u` scrolls the project_panel up half of the visible entries
- `ctrl-d` scrolls the project_panel down half of the visible entries
- `z z` scrolls current selection to center of window
- `z t` scrolls current selection to top of window
- `z b` scrolls current selection to bottom of window
- `{num} j` and `{num} k` now move up and down with a count
Since 2021 Neovim remaps Y to $y (1). DO the same in zed through a new action `YankToEndOfLine`.
1: https://github.com/neovim/neovim/pull/13268
Release Notes:
- Added vim::YankToEndOfLine action which copies from the cursor to the end of the line excluding the newline. We bind it to Y by default in the vim keymap.
i'm testing out zed, coming from emacs, and so i'm trying out the base
keymap for it. i noticed though that zed's default git keybindings don't
work when the gitpanel is open though, because of the top-level binding
of `ctrl-g` to cancel. my expectation is that the emacs-like keybindings
would work insofar as they don't clobber zed's defaults (which would
take precedence), but obviously i'll defer to others on this!
another option could be to use the `C-x v` keymap prefix that the emacs
built-in `vc` package uses, but it doesn't contain the same set of
bindings for git commands that zed has.
This is how `ctrl-n` works on macOS. Right now `ctrl-n` on Windows with
the default keymap usually causes a new buffer to open, which is
inconvenient.
Release Notes:
- N/A
Vim mode currently supports `gt` (go to next tab) and `gT` (go to
previous tab) but not with count. Implement the expected behavior as
defined by vim:
- `<count>gt` moves to tab `<count>`
- `<count>gT` moves to previous tab `<count>` times (with wraparound)
Release Notes:
- Improved vim `gt` and `gT` to support count, e.g. `5gt` - go to tab 5,
`8gT` - go to 8th previous tab with wraparound.
This is a redo of #29776. I went for a separate function -- instead of
adding a bunch of conditions to `vim::Paste` -- because there were quite
a few differences.
Release Notes:
- Added a `vim::HelixPaste` command that imitates Helix's paste behavior
---------
Co-authored-by: Jakub Konka <kubkon@jakubkonka.com>
Closes https://github.com/zed-industries/zed/issues/37660
This PR makes sections in the AI settings UI more consistent with each
other and also just overall simpler. One of the main changes here is
adding the tools from a given MCP server in a modal (as opposed to in a
disclosure within the settings view). That's mostly an artifact of
wanting to make all of the items within sections look more of the same.
Then, in the process of doing so, also changed the logic that we were
using to display MCP servers; previously, in the case of extension-based
servers, we were only showing those that were _configured_, which felt
wrong because you should be able to see everything you have _installed_,
despite of its status (configured or not).
However, there's still a bit of a bug (to be solved in a follow-up PR),
which already existed but it was just not visible given we'd only
display configured servers: an MCP server installed through an extension
stays as a "custom server" until it is configured. If you don't
configure it, you can't also uninstall it from the settings view (though
it is possible to do so via the extensions UI).
Release Notes:
- agent: Improve settings view UI and solve issue where MCP servers
would get unsorted upon turning them on and off (they're all
alphabetically sorted now).
Closes#34192
Without selection, only current character would be affected.
Also if #38117 is merged too, then transformations in SelectMode behave
correctly too and selection is not collapsed.
Release Notes:
- helix: Implemented `~`, `` ` ``, `` Alt-` `` correctly in normal and
select modes
---------
Co-authored-by: Jakub Konka <kubkon@jakubkonka.com>
Move keyboard shortcut for `pane:GoForward` so it's going to be
displayed as a shortcut hint in UI. Currently `Forward` is shown as a
hint, which isn't consistent with `GoBack` action and can be confusing.
Release Notes:
- Improved the displayed keybinding for the `pane::GoForward` action on
Linux.
Closes #ISSUE
Release Notes:
- (preview only) restored ctrl-shift-{left,right} for Larger/Smaller
syntax node. This is VSCode's default and avoids the breaking change
from #37874
Closes #ISSUE
This PR continues work from #32821 by adding a stash entry picker for
pop/drop operations. Additionally, the stash pop action in the git panel
is now disabled when no stash entries exist, preventing error logs from
attempted pops on empty stashes.
Preview:
<img width="1920" height="1256" alt="Screenshot From 2025-09-11
14-08-31"
src="https://github.com/user-attachments/assets/b2f32974-8c69-4e50-8951-24ab2cf93c12"
/>
<img width="1920" height="1256" alt="Screenshot From 2025-09-11
14-08-12"
src="https://github.com/user-attachments/assets/992ce237-43c9-456e-979c-c2e2149d633e"
/>
Release Notes:
- Added a stash picker to pop and drop a specific stash entry
- Disabled the stash pop action on the git panel when no stash entries
exist
- Added git stash apply command
- Added git stash drop command
Please credit @eliaperantoni, for the original PR (#34136).
Merge after (#34060) to avoid conflicts.
Closes https://github.com/zed-industries/zed/issues/33838
Closes https://github.com/zed-industries/zed/issues/33906
Release Notes:
- Helix will no longer sometimes fall out into "normal" mode, will
remain in "helix normal" (example: vv)
- Added dedicated "helix select" mode that can be targeted by
keybindings
Known issues:
- [ ] Helix motion, especially surround-add will not properly work in
visual mode, as it won't call `helix_move_cursor`. It is possible
however to respect self.mode in change_selection now.
- [ ] Some operations, such as `Ctrl+A` (increment) or `>` (indent) will
collapse selection also. I haven't found a way to avoid it.
---------
Co-authored-by: fantacell <ghub@giggo.de>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
TODO:
- [x] Double-check if we like the naming of the new actions
- [x] Only show keybinding hint once per option (e.g. if there are two
`allow_once` buttons only show it on the first one)
- [x] If there are multiple tool calls that need authorisation, only
show keybindings on the first tool call
- [x] Figure out which keybindings to use
- [x] Add linux keybindings
- [x] Add windows keybindings
- [x] Bug: long keybindings can make the buttons overflow
Release Notes:
- Add keybindings for authorizing tool calls (`agent: Allow once`,
`agent: Allow always`, `agent: Reject once`) in the agent panel
---------
Co-authored-by: Agus Zubiaga <agus@zed.dev>
Skipping Linux and Windows keymaps here, as it's hard to find a
consistent base-binding for all 4 actions across all platforms that
don't break important actions for each keymap. Someone else can think on
that and make a proposal.
Release Notes:
- Added bindings for navigating between sibling nodes in the syntax tree
on macOS (`cmd-ctrl-{up/down}` for `SelectPreviousSyntaxNode` and
`SelectNextSyntaxNode`). Breaking change: the existing syntax tree
parent/child navigation bindings have moved from
`ctrl-shift-{left/right}` to `cmd-ctrl-{left/right}` to create a unified
four-directional navigation pattern where all syntax tree operations use
the same modifier combination. We could not use the previous base
modifiers without breaking more bindings.
This is an initial implementation that isn't used for any settings yet,
but will be used once `Vec<String>` is implemented.
I also updated the window.with_state api to grant access to a
`Context<S>` app reference instead of just an App.
## Example
<img width="603" height="83" alt="Screenshot 2025-09-09 at 2 15 56 PM"
src="https://github.com/user-attachments/assets/7b3fc350-a157-431f-a4bc-80a1806a3147"
/>
Release Notes:
- N/A
This is an implementation of matching like "m i (", as well as "] (" and
"[ (" in `helix_mode` with a few supported objects and a basis for more.
Release Notes:
- Added helix operators for selecting text objects
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
- **toolchains: Add new state to toolchain selector**
- **Use toolchain term for Add Toolchain button**
- **Hoist out a meta function for toolchain listers**
Closes#27332
Release Notes:
- python: Users can now specify a custom path to their virtual
environment from within the picker.
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Co-Authored-By: Brandan <b5@n0.computer>
Release Notes:
- Added a new action `terminal::Toggle` that is by default bound to
'ctrl-\`'. This copies the default behaviour from VSCode and Jetbrains
where the terminal opens and closes correctly. If you'd like the old
behaviour you can rebind 'ctrl-\`' to `terminal::ToggleFocus`
Co-authored-by: Brandan <b5@n0.computer>
Closes https://github.com/zed-industries/zed/issues/37144
Adjusts `editor::DeleteToPreviousWordStart`,
`editor::DeleteToNextWordEnd`, `editor::DeleteToNextSubwordEnd` and
`editor::DeleteToPreviousSubwordStart` actions to
* take whitespace sequences with length >= 2 into account and stop after
removing them (whilst movement would also include the word after such
sequences)
* take current language's brackets into account and stop after removing
the text before them
The latter is configurable and can be disabled with `"ignore_brackets":
true` parameter in the action.
Release Notes:
- Improved word deletions to consider whitespace sequences and brackets
by default
Add support for scrolling the contents rendered aside an
`editor::code_context_menus::CodeContextMenu` by introducing the
`scroll_aside` method.
For now this method is only implemented for the
`CodeContextMenu::Completions` variant, which will scroll the aside
contents for an `editor::code_context_menus::CompletionsMenu` element,
as a `ScrollHandle` is added to the aside content that is rendered.
In order to be possible to trigger this via keybindings, a new editor
action is introduced, `ContextMenuScrollAside`, which accepts a number
of lines or pages to scroll the content by.
Lastly, the default keymaps for both MacOS and Linux, as well as for
Zed's vim mode, are updated to ensure that the following keybindings are
supported when a completion menu is open and the completion item's
documentation is rendered aside:
- `ctrl-e`
- `ctrl-y`
- `ctrl-d`
- `ctrl-u`
### Recording
https://github.com/user-attachments/assets/02043763-87ea-46f5-9768-00e907127b69
---
Closes#13194
Release Notes:
- Added support for scrolling the documentation panel shown alongside
the completion menu in the editor with `cltr-d`, `ctrl-u`, `ctrl-e` and
`ctrl-y`
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: MrSubidubi <finn@zed.dev>
Closes#32020
Release Notes:
- Helix: Improve `x` behaviour. Will respect modifiers (`5 x`). Pressing
`x` on a empty line, will select current+next line, because helix
considers current line to be already selected without the need of
pressing `x`.
Closes https://github.com/zed-industries/zed/issues/33725
The default bindings for the `editor::NewlineAbove` and
`editor::NewlineBelow` actions in the default keymap were accidentally
swapped some time ago. This causes confusion, as normally these are the
other way around.
This PR fixes this by swapping these back, which also matches what
[VSCode does by
default](https://code.visualstudio.com/shortcuts/keyboard-shortcuts-linux.pdf).
Release Notes:
- Swapped the default bindings for `editor::NewlineBelow` and
`editor::NewlineAbove` for Linux and Windows to align more with other
editors.
Closes#36300
This PR follows Windows conventions by introducing
`KeybindingKeystroke`, so shortcuts now show up as `ctrl-shift-4`
instead of `ctrl-$`.
It also fixes issues with keyboard layouts: when `use_key_equivalents`
is set to true, keys are remapped based on their virtual key codes. For
example, `ctrl-\` on a standard English layout will be mapped to
`ctrl-ё` on a Russian layout.
Release Notes:
- N/A
---------
Co-authored-by: Kate <kate@zed.dev>
