This addresses the editor context menu portion of #17819.
Release Notes:
- Added `editor::OpenContextMenu` action to open context menu at current
cursor position.
Change the "Apply" and "Discard" buttons to match @danilo-leal's design!
Here are some different states:
### Cursor in the first hunk
Now that the cursor is in a particular hunk, we show the "Apply" and
"Discard" names, and the keyboard shortcut. If I press the keyboard
shortcut, it will only apply to this hunk.
<img width="759" alt="Screenshot 2024-11-23 at 10 54 45 PM"
src="https://github.com/user-attachments/assets/68e0f109-9493-4ca2-a99c-dfcbb4d1ce0c">
### Cursor in the second hunk
Moving the cursor to a different hunk changes which buttons get the
keyboard shortcut treatment. Now the keyboard shortcut is shown next to
the hunk that will actually be affected if you press that shortcut.
<img width="749" alt="Screenshot 2024-11-23 at 10 56 27 PM"
src="https://github.com/user-attachments/assets/59c2ace3-6972-4a60-b806-f45e8c25eaae">
Release Notes:
- Restyled Apply/Discard buttons
---------
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Danilo Leal <67129314+danilo-leal@users.noreply.github.com>
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Co-authored-by: Bennet Bo Fenner <53836821+bennetbo@users.noreply.github.com>
Closes https://github.com/zed-industries/zed/issues/21077
* BREAKING: rename `file_finder::OpenMenu` into
`file_finder::ToggleMenu`
* Display the keybinding for menu toggling when the menu is open
* Fix `enter` not working in the menu
Release Notes:
- Fixed enter not working and menu toggle binding not shown in the file
finder menu
Follow-up of https://github.com/zed-industries/zed/pull/20419
Release Notes:
- - (breaking change) Use `ctrl-right` instead of `cmd-right` as a macOS
default for `editor::AcceptPartialInlineCompletion` (Linux)
Closes https://github.com/zed-industries/zed/issues/20187
Make outline panel more eager to open its entries:
* scroll editor to selected outline entries (before it required an extra
`"outline_panel::Open", { "change_selection": false }` action call)
* make any `Open` action call to behave like `"outline_panel::Open", {
"change_selection": true }` and remove the redundant parameter.
Now opening an entry is equal to double clicking the same entry: the
editor gets scrolled and its selection changes
* add a way to open entries the same way as excerpts are open in multi
buffers (will open the entire file, scroll and place the caret)
* additionally, fix another race issue that caused wrong entry to be
revealed after the selection change
Release Notes:
- Improved outline panel keyboard navigation
Closes#7688
Release Notes:
- (breaking change) Stop binding keyboard shortcuts to alt-[a-z]. These
get in the way of typing characters. This is usually not an issue for
English speakers because we don't use many characters; but for other
Latin-based languages with diacritics our shortcuts prevent them typing
what they need to type.
This primarily affects Zed's extra features:
* `alt-q` => `cmd-k q` on maOS, `ctrl-k q` on Linux for `editor::Rewrap`
* `alt-z` => `cmd-k z` on macOS `ctrl-k z` on Linux for
`editor::ToggleSoftWrap`
* `alt-m` => `ctrl-shift-m` for `assistant::ToggleModelSelector`
* `alt-v` => `ctrl-shift-v` for `["editor::MovePageUp", {
"center_cursor": true }]` (macOS only)
* `alt-t` => `cmd-shift-r` on maOS, `ctrl-shift-r` on Linux for
`task::Spawn` (The previous binding for `editor::RevealInFileManager`
now only applies in the project panel)
* `alt-shift-t` => `alt-cmd-r` on maOS, `ctrl-alt-r` on Linux for
`task::Rerun`
* `alt-shift-f` => `ctrl-shift-f` for
`project_panel::SearchInDirectory`.
But also overrides some bindings from Readline.
* `alt-h` => `alt-backspace` for `editor::DeleteToPreviousWordStart`
* `alt-d` => `alt-delete` for `editor::DeleteToNextWordEnd`
* `alt-f` => `ctrl-f` for `editor:: MoveToNextWordEnd` (`ctrl-f` was
previously `editor::MoveRight`)
* `alt-b` => `ctrl-b` for `editor::MoveToNextWordStart` (`ctrl-b` was
previously `editor::MoveLeft`)
Note that `alt-t` and `alt-shift-t` have been kept as aliases (because
no-one complained about `t` yet; but we may remove them completely in
the future).
I went with Cmd-Shift-Y on macOS (Ctrl-Shift-Y on Linux) for "yes accept
this individual hunk" - both are currently unused.
I went with Cmd-Shift-A on macOS (Ctrl-Alt-A on Linux) for "accept all
hunks" - both are unused. (Ctrl-Shift-A on Linux was taken, as is
Ctrl-Alt-Y, so although the pairing of Ctrl-Shift-Y and Ctrl-Alt-A isn't
necessarily obvious, the letters seem intuitive - "yes" and "all" - and
those key combinations don't conflict with anything.)
Release Notes:
- Added keybindings for applying hunks in Proposed Changes
<img width="247" alt="Screenshot 2024-10-25 at 12 47 00 PM"
src="https://github.com/user-attachments/assets/d6355621-ba80-4ee2-8918-b7239a4d29be">
Closes#7417
Release Notes:
- Added basic support for Alacritty's [vi
mode](https://github.com/alacritty/alacritty/blob/master/docs/features.md#vi-mode)
to the built-in terminal (which is using Alacritty under the hood.) The
vi mode can be activated with `ctrl-shift-space` and then supports some
basic motions to navigate through the terminal's scrollback buffer.
## Details
Leverages existing selection functionality from mouse_drag and the
ViMotion API of alacritty to add basic vi motions in the terminal.
Please note, this is only basic functionality (move, select, and yank to
system clipboard) and not a fully functional vim environment (e.g.
search, configurable keybindings, and paste). I figured this would be an
interim solution to the long term, more fleshed out, solution proposed
by @mrnugget.
Ctrl+Shift+Space to enter Vi mode while in the terminal (Same default
binding in alacritty)
Fixes some missing shortcuts from Tooltips like the project search,
buffer search, quick action bar, ....
https://github.com/user-attachments/assets/d3a0160a-8d6e-4ddc-bf82-1fabeca42d59
This should hopefully help new users learn and discover some nice
keyboard shortcuts
Release Notes:
- Display keyboard shortcuts inside tooltips in the project search,
buffer search etc.
Closes#6822
Updates #5142
Release Notes:
- Added new fold actions to toggle folds (`cmd-k cmd-l`), fold every
fold (`cmd-k cmd-0`) unfold every fold (`cmd-k cmd-j`) to fold
recursively (`cmd-k cmd-[`) and unfold recursively (`cmd-k cmd-]`).
- vim: Added `za` to toggle fold under cursor.
- vim: Added `zO`/`zC`/`zA` to open, close and toggle folds recursively
(and fixed `zc` to not recurse into selections).
- vim: Added `zR`/`zM` to open/close all folds in the buffer.
Release Notes:
- Added a new `assistant.inline_alternatives` setting to configure
additional models that will be used to perform inline assists in
parallel.
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Roy <roy@anthropic.com>
Co-authored-by: Adam <wolffiex@anthropic.com>
Some notes:
- You can put the cursor on the start or end line with triple backticks,
it doesn't actually have to be inside the block.
- Placing the cursor outside of a code block does nothing.
- Code blocks are determined by counting triple backticks pairs from
either start or end of buffer, and nothing else.
- If you manually select something, the selection takes precedence over
any code blocks.
Release Notes:
- Added the ability to copy surrounding code blocks in the assistant
panel into the clipboard, or inserting them directly into the editor,
without manually selecting. Place cursor anywhere in a code block
(marked by triple backticks) and use the `assistant::CopyCode` action
(`cmd-k c` / `ctrl-k c`) to copy to the clipboard, or the
`assistant::InsertIntoEditor` action (`cmd-<` / `ctrl-<`) to insert into
editor.
---------
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
Co-authored-by: Bennet <bennet@zed.dev>
This PR adds a keybinding for the `editor: rewrap` command.
It is bound to `alt-q`, by default. In Vim mode, it is bound to `g q`.
Release Notes:
- N/A
- Fixes incorrect shorcuts being displayed in Linux context menus.
- Re-ordering them within the json object doesn't work, but putting them in a dedicate block does.
Follow-up https://github.com/zed-industries/zed/pull/16085 that fixes
the search deploy to be actually a part of the terminal-related
bindings.
Part of https://github.com/zed-industries/zed/issues/16839
Also
* fixes few other bindings to use `shift` and avoid conflicts with the
existing key bindings.
* adds terminal inline assist to the context menu and makes both the
menu and the button to dynamically adjust to `assist.enabled` settings
change
It is still unclear to me, why certain labels for certain bindings are
wrong (it's still showing `ctrl-w` for closing the terminal tab, and
`shift-insert` instead of `ctrl-shift-v` for Paste, while Insert is near
and has a `ctrl-shift-c` binding shown) but at least the keys work now.
Release notes:
- Improved Linux terminal keymap and context menu
Prototypes a way to display new entities in the outline panel, making it
less outline.
The design is not final and might be adjusted, but the workflow seems to
be solid enough to keep and iron it out.
* Now, when any project search buffer is activated (multi buffer mode),
or buffer search is open (singleton buffer mode, but is available for
search usages multi buffer too — in that case buffer search overrides
multi buffer's contents display), outline panel displays all search
matches instead of the outline items.
Outline items are not displayed at all during those cases, unless the
buffer search is closed, or a new buffer gets opened, of an active
buffer search matches zero items.
https://github.com/user-attachments/assets/4a3e4faa-7f75-4522-96bb-3761872c753a
* For the multi buffer mode, search matches are grouped under
directories and files, same as outline items
* For buffer search , search matches are displayed one under another
For both cases, the entire match line is taken and rendered, with the
hover tooltip showing the line number.
So far it does not look very bad, but I am certain there are bad cases
with long lines and bad indents where it looks not optimal — this part
most probably will be redesigned after some trial.
Or, maybe, it's ok to leave the current state if the horizontal
scrollbar is added?
Clicking the item navigates to the item's position in the editor.
Search item lines are also possible to filter with the outline panel's
filter input.
* Inline panel is now possible to "pin" to track a currently active
editor, to display outlines/search results for that editor even if
another item is activated afterwards:
This is useful in combination with project search results display: now
it's possible to leave the search results pinned in the outline panel
and jump to every search result and back.
If the item the panel was pinned to gets closed, the panel gets back to
its regular state, showing outlines/search results for a currently
active editor.
Release Notes:
- Added a way to display buffer/project search entries in the outline
panel
This PR:
- Makes slash commands easier to compose by adding a concept,
`CompletionIntent`. When using `tab` on a completion in the assistant
panel, that completion item will be expanded but the associated command
will not be run. Using `enter` will still either run the completion item
or continue command composition as before.
- Fixes a bug where running `/diagnostics` on a project with no
diagnostics will delete the entire command, rather than rendering an
empty header.
- Improves the autocomplete rendering for files, showing when
directories are selected and re-arranging the results to have the file
name or trailing directory show first.
<img width="642" alt="Screenshot 2024-08-13 at 8 12 43 PM"
src="https://github.com/user-attachments/assets/97c96cd2-741f-4f15-ad03-7cf78129a71c">
Release Notes:
- N/A
Release Notes:
- Added `ctrl-alt-enter` keybinding for `repl::RunInPlace`
(`ctrl-option-enter` on MacOS). Keeps your screen position and cursor in
place when running any block.
- Disable Terminal ctrl-a (conflicts with readline).
- Standardize modifier order to use ctrl-shift instead of shift-ctrl to match existing keys.
- Move ctrl-shift-c (collab) to \!Terminal context (fix flickering in terminal right click menu).
- Consolidate two Terminal blocks in linux keybind
... on all platforms.
`ctrl-shift-enter` for the repl, `cmd-enter` for the assistant. People
can override this behavior as they desire in their own keymaps.
Release Notes:
- N/A
Ensures that the assistant keybinding for cmd-enter takes precedence
over `repl::Run`.
On Linux, `ctrl-enter` (the equivalent), issues `repl::Run` when in a
jupyter context.
Release Notes:
- N/A
Release Notes:
- linux: Added a fallback Open picker for when XDG is not working
- Added a new setting `use_system_path_prompts` (default true) that can
be disabled to use Zed's builtin keyboard-driven prompts.
---------
Co-authored-by: Max <max@zed.dev>
Zed already has a shortcut assigned to ctrl-alt-g and it's mapped to
`search::SelectNextMatch`. Having another multi shortcut with the same
prefix makes `ctrl-alt-g` to have a very noticeable delay when pressed.
This commit changes the default shortcut for git blame to `alt-g b`
Release Notes:
- N/A
